IE3

INDUSTRIAL RANGE

DBS 2.2-75 kW
BELT-DRIVEN ROTARY SCREW

COMPRESSORS
F I X A N D VA R I A B L E S P E E D
 DBS Industrial Range

DARI offers a complete range of belt-driven

rotary screw compressors, fix or variable speed,
to satisfy every compressed air need,
from small scale companies to big industries.

2 www.daricompressors.com
 55 / 75 kW
page 20

45 / 55 kW
page 18

30 / 37 kW
page 16

18.5 / 22 kW
page 14

7.5 / 15 kW
page 12

4 / 5.5 kW
page 8

2.2 / 4 kW
page 6

www.daricompressors.com 3
 Product range assets

The range of DARI screw compressors is designed for industrial applications and offered with
different power or technical set-up, depending on the customer’s specific demands.
All models in the range have the following benefits in common, which are typical of DARI
screw technology:

High volumetric yield

The free air delivered from our hi-efficiency air-ends contributes to lower energy
consumption and therefore significant savings.

Air-ends
High efficiency air-ends, entirely designed
and manufactured in our factories in Italy. Reliability
The low speed of the air-end guarantees minimal wear and long durability.

Suitable for intense and non-stop operation

24hrs without performance drop.

Low installation cost

The versions fitted with tank and dryer are ready for use, with no added cost
of installation.
Intake valve
100% designed and made in Italy.

Low noise levels

This means the operator can install the compressor near the workstation.

Compact design means reduced dimensions

Easy maintenance
The DARI rotary screw compressors are built with special attention to facilitate the routine
maintenance and accessibility of the internal components.
Axial fan (7,5-75 kW models)
Supplies the optimum cooling air flow
for the generously sized air/oil cooler: safe
operation in any environmental condition “IE3 Premium Efficiency” motors
with minimum noise level. The IE3 high efficiency motors, combined with our high performance air-ends,
minimize the energy costs. Furthermore, the IE3 motors reduce CO2 emissions:
an important contribution to protecting the environment.

MADE IN ITALY

Minimum pressure valve

Built in house with oxide free material, The entire manufacturing cycle is carried out in-house,
fully machined. A sharp technical ensuring our air-ends are 100% designed and made in Italy.
choice to grant maximum reliability
in any operational conditions.

4 www.daricompressors.com
Advanced Controllers

The advanced controllers fitted to the DBS range have been specifically developed to guarantee optimum monitoring and
regulation of the compressors operation, allowing flexibility and full programming of the complete compressed air station
for maximum efficiency and safety.

ETMII
Installed on models from 4 to 15 kW.

Controller with multi-function backlight display, the menu is

alphanumeric type. The main screen display indicates:
- Working pressure (off load / load);
- Oil temperature;
- Total working hours;
- On-load working hours; Four maintenance timers (air filter, oil, oil filter, oil separator).
- Compressor status led (stand-by, off load, load); Automatic re-start after power failure (subject to safety conditions).
- Hours remaining before maintenance. Cooling fan temperature control.
Compressor remote start facility.
Integrated phase sequence relay.

ETIV
Installed on models from 18.5 to 75 kW.
Controller with multi-function backlight LCD graphic
display, the menu is drop down type.
The display shows:
- Working pressure (off load / load);
- Oil temperature;
- Compressor status (stand-by, off load, load);
- Fan status (off / on);
- Date and time;
- Hours remaining before maintenance;
- Inverter use percentage.

Compressor rotation management for up to 4 units

It is possible to connect up to 4 compressors for managing distribution of the workload in such a way to equalize the hours but also
changing set pressures of the various compressors for different times.

SMS Device (Service Management System)

SMS is the innovative device to allow the remote control of the compressor and to perform predictive maintenance available on screw
compressors equipped with the latest ETIV controller. The device automatically sends an e-mail (up to 3 addresses to be defined
during set-up) in case of an alarm and according to preset thresholds (every hour, every day, every week): this feature allows you to
accurately schedule routine maintenance and to allow intervention in case of special maintenance or fault finding. Furthermore, you
can have remote control from any device (tablet, smartphone, PC, notebook, etc.), via a web page, as long as it is connected to the
same Internet network as the SMS device.

Predictive and targeted maintenance: Compressor remote control:

- automated e-mail in case of alarms, - access to the various menu levels (user, service),
- automated e-mail every hour / day / week. - check the status of the compressor online,
- on/off control,
- no software to be installed.

www.daricompressors.com 5
 FILTERS
Oil filter, oil separator
filter (both spin-on type),
and the air filter are quite
large: this means long
service intervals and
lower costs.

Centrifugal
fan
Thermostatic controlled,
it ensures ideal cooling,
keeping the machine’s
noise level low.

AIR DRYER
Tank-mounted versions
are also available with
refrigerating dryer (ES),
ready for instant operation
without any additional
effort.

DBS SE 2.2 - 3.0 - 4.0

ELECTROMECHANICAL

ON/OFF switch, easy to use: no idle running means considerable energy saving.

Features and main strenghts:

Integrated phase sequence relay to check the air-end rotation’s direction.

Very compact design.
Minimun energy consumption.
Low noise level: 58-60 dB(A).
The Poly-V belt drive ensures long service life and minimum maintenance.
Independent ventilation.
The machines are supplied ready for use: simply connect the compressor to the power supply
and the distribution system to start work without any additional effort.
Available with 200-lt tank and with dryer.

6 www.daricompressors.com
 2.2 / 4 kW DBS SE

CONTROL
SYSTEM
Pressure switch to control
compressor fitted with
pressure gauge and hour
counter.

Air-oil circuit
All air-oil circuit hoses are
made of rubber covered
with a metal mesh resistant to
high temperature.

BALL VALVE
Tank-mounted models
with ball valve for smooth
condensate drain.

DRIVE
The Poly-V belt guarantees
minimum maintenance and
extended service lifetime.

Simple maintenance: the internal mechanical FS14 air-end

Entirely designed and made
parts are easily accessible to perform routine in Italy, just as the intake regulator
maintenance quickly and simply. and separator block with minimum
pressure/check valve.

www.daricompressors.com 7
 OIL FILTERS
Oil filter, oil separator filter
(both spin-on type), and the
air filter are quite large: this
means long service intervals
and lower costs.

Centrifugal
fan
Thermostatic controlled,
it ensures ideal cooling,
keeping the machine’s
noise level low.

AIR DRYER
Tank-mounted versions
are also available with
refrigerating dryer (ES),
ready for instant operation
without any additional
effort.

DBS 4.0 - 5.5

ELECTRONIC

All functions of the compressor are controlled by the ETMII electronic controller.

Features and main strenghts:

Integrated phase sequence relay to check the air-end rotation’s direction.

Very compact design.
Minimun energy consumption.
Low noise level: 60-64 dB(A).
The Poly-V belt drive ensures long service life and minimum maintenance.
Independent ventilation.
The machines are supplied ready for use: simply connect the compressor to the power supply
and the distribution system to start work without any additional effort.
Tank-mounted models (200, 270 or 500-lt) with ball valve for smooth condensate drain.
Available with dryer.

8 www.daricompressors.com
 4 / 5.5 kW DBS
ETMII
It manages all compressor functions
and and enables the the system’s diagnosis;
the display shows: working pressure,
working/load hours, charge/idle running,
oil temperature.

intake
regulator
The electro-pneumatic
system adjusts compressor
working to guarantee
minimum pressure when
running idle and maximum
saving upon start-up.

Pressure
transducer
The transducer guarantees
an accurate and stable
operation during the time.
It’s allows direct modification
of the working pressure
from the electronic controller
without any mechanical
intervention.

Air-oil circuit
All air-oil circuit hoses are
made of rubber covered
with a metal mesh resistant to
high temperature.

Simple maintenance: the internal mechanical parts

are easy to access, to perform routine maintenance FS14 air-end
Entirely designed and made in Italy,
quickly and simply. just as the intake regulator and separator block with
minimum pressure/check valve.

www.daricompressors.com 9
 DBS SE 2.2 / 4 kW

Floor mounted Compressor Compressor

compressor + 200 lt air receiver + 200 lt air receiver + dryer

Air Working Noise Connec-

Power Air delivery Weight Dimensions
receiver pressure level tion
Model Code
l kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
Floor mounted compressor - Single-phase

DBS SE 2.2-10 M V51JT60FDR071 – 2.2 3 240 14.4 8.5 10 145 58 1/2" 87 192 58 x 48 x 76

Floor mounted compressor

DBS SE 2.2-08 V51JU72FDR071 – 2.2 3 325 19.5 11.5 8 116 58 1/2" 87 192 58 x 48 x 76

DBS SE 2.2-10 V51JT72FDR071 – 2.2 3 290 17.4 10.2 10 145 58 1/2" 87 192 58 x 48 x 76

DBS SE 3.0-08 V51JS72FDR071 – 3 4 430 25.8 15.2 8 116 59 1/2" 92 203 58 x 48 x 76

DBS SE 3.0-10 V51JQ72FDR071 – 3 4 385 23.1 13.6 10 145 59 1/2" 92 203 58 x 48 x 76

DBS SE 4.0-08 V51JR72FDR071 – 4 5.5 580 34.8 20.5 8 116 60 1/2" 93 205 58 x 48 x 76

DBS SE 4.0-10 V51JP72FDR071 – 4 5.5 485 29.1 17.1 10 145 60 1/2" 93 205 58 x 48 x 76

With air receiver - Single-phase

DBS SE 2.2-10 M - 200 V77JT60FDR071 200 2.2 3 240 14.4 8.5 10 145 58 1/2" 144 318 144 x 51 x 128

With air receiver

DBS SE 2.2-08 - 200 V77JU72FDR071 200 2.2 3 325 19.5 11.5 8 116 58 1/2" 144 318 144 x 51 x 128

DBS SE 2.2-10 - 200 V77JT72FDR071 200 2.2 3 290 17.4 10.2 10 145 58 1/2" 144 318 144 x 51 x 128

DBS SE 3.0-08 - 200 V77JS72FDR071 200 3 4 430 25.8 15.2 8 116 59 1/2" 149 329 144 x 51 x 128

DBS SE 3.0-10 - 200 V77JQ72FDR071 200 3 4 385 23.1 13.6 10 145 59 1/2" 149 329 144 x 51 x 128

DBS SE 4.0-08 - 200 V77JR72FDR071 200 4 5.5 580 34.8 20.5 8 116 60 1/2" 150 332 144 x 51 x 128

DBS SE 4.0-10 - 200 V77JP72FDR071 200 4 5.5 485 29.1 17.1 10 145 60 1/2" 150 332 144 x 51 x 128

With air receiver and dryer

DBS SE 2.2-08 - 200 ES V77JU72FDR171 200 2.2 3 325 19.5 11.5 8 116 58 1/2" 174 384 144 x 51 x 128

DBS SE 2.2-10 - 200 ES V77JT72FDR171 200 2.2 3 290 17.4 10.2 10 145 58 1/2" 174 384 144 x 51 x 128

DBS SE 3.0-08 - 200 ES V77JS72FDR171 200 3 4 430 25.8 15.2 8 116 59 1/2" 179 395 144 x 51 x 128

DBS SE 3.0-10 - 200 ES V77JQ72FDR171 200 3 4 385 23.1 13.6 10 145 59 1/2" 179 395 144 x 51 x 128

DBS SE 4.0-08 - 200 ES V77JR72FDR171 200 4 5.5 580 34.8 20.5 8 116 60 1/2" 180 397 144 x 51 x 128

DBS SE 4.0-10 - 200 ES V77JP72FDR171 200 4 5.5 485 29.1 17.1 10 145 60 1/2" 180 397 144 x 51 x 128

Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

10 www.daricompressors.com
 4 / 5.5 kW DBS

Floor mounted Compressor Compressor

compressor + 200 lt air receiver + 270 lt air receiver + dryer

Air Working Noise Connec-

Power Air delivery Weight Dimensions
Receiver pressure level tion
Model Code
l kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)

Floor mounted compressor

DBS 4.0-08 V51JR92FDR071 – 4 5.5 580 34.8 20.5 8 116 60 1/2" 94 208 58 x 48 x 76

DBS 4.0-10 V51JP92FDR071 – 4 5.5 485 29.1 17.1 10 145 60 1/2" 94 208 58 x 48 x 76

DBS 4.0-13 V51JV92FDR071 – 4 5.5 330 19.8 11.6 13 188 60 1/2" 94 208 58 x 48 x 76

DBS 5.5-08 V51JW92FDR071 – 5.5 7.5 720 43.2 25.4 8 116 64 1/2" 125 276 60 x 52 x 78

DBS 5.5-10 V51JO92FDR071 – 5.5 7.5 650 39 22.9 10 145 64 1/2" 125 276 60 x 52 x 78

DBS 5.5-13 V51JM92FDR071 – 5.5 7.5 485 29.1 17.1 13 188 64 1/2" 125 276 60 x 52 x 78

With air receiver

DBS 4.0-08 - 200 V77JR92FDR071 200 4 5.5 580 348 20.5 8 116 60 1/2" 151 333 144 x 51 x 128

DBS 4.0-10 - 200 V77JP92FDR071 200 4 5.5 485 29.1 17.1 10 145 60 1/2" 151 333 144 x 51 x 128

DBS 5.5-08 - 270 V91JW92FDR071 270 5.5 7.5 720 43.2 25.4 8 116 64 1/2" 203 448 156 x 57 x 139

DBS 5.5-10 - 270 V91JO92FDR071 270 5.5 7.5 650 39 22.9 10 145 64 1/2" 203 448 156 x 57 x 139

DBS 5.5-08 - 500 V83JW92FDR071 500 5.5 7.5 720 43.2 25.4 8 116 64 1/2" 236 520 198 x 60 x 148

DBS 5.5-10 - 500 V83JO92FDR071 500 5.5 7.5 650 39 22.9 10 145 64 1/2" 236 520 198 x 60 x 148

With air receiver and dryer

DBS 4.0-08 - 200 ES V77JR92FDR171 200 4 5.5 580 34.8 20.5 8 116 60 1/2" 181 399 144 x 51 x 128

DBS 4.0-10 - 200 ES V77JP92FDR171 200 4 5.5 485 29.1 17.1 10 145 60 1/2" 181 399 144 x 51 x 128

DBS 5.5-08 - 270 ES V91JW92FDR171 270 5.5 7.5 720 43.2 25.4 8 116 64 1/2" 215 474 156 x 57 x 139

DBS 5.5-10 - 270 ES V91JO92FDR171 270 5.5 7.5 650 39 22.9 10 145 64 1/2" 215 474 156 x 57 x 139

DBS 5.5-08 - 500 ES V83JW92FDR171 500 5.5 7.5 720 43.2 25.4 8 116 64 1/2" 277 611 198 x 60 x 148

DBS 5.5-10 - 500 ES V83JO92FDR171 500 5.5 7.5 650 39 22.9 10 145 64 1/2" 277 611 198 x 60 x 148

Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 - 12.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 11
 DRIVE ETMII
The Poly-V belt guarantees It manages all compressor functions
long service life (lasts at and and enables the the system’s
least twice as long as a diagnosis; the display shows:
standard belt) and minimum working pressure, working/load
maintenance. hours, charge/idle running,
oil temperature.

Ventilation
Compressor cabinet is cooled
by the axial fan directly
controlled by the ETMII,
in order to quickly reach
and maintain the operating
temperature ideal for efficient
operation.

Pressure
transducer
It guarantees an accurate
and stable operation.
The transducer makes it
possible to directly modify
the working pressure from
the electronic controller
without any mechanical
intervention.

DBS 8 - 11 - 15 - 16

Features and main strenghts:

Intake regulator, separator unit and minimum

FS50 TF
FS26 TF pressure/check valve: DARI design and production.
Cooling system designed for operation even in extreme
FS50 TF - FS26 TF AIR-ENDS conditions, ensuring the ideal working temperature.
Entirely designed and made in Italy, just as the intake regulator
and separator block with minimum pressure/check valve. Tank-mounted versions are also available with
FS50 TF is mounted on DBS 16 models. refrigerating dryer (ES), ready for instant operation
without any additional effort.

12 www.daricompressors.com
 7.5 / 15 kW DBS

Floor mounted Compressor Compressor

compressor + 270 lt air receiver + 270 lt air receiver + dryer

Air Working Noise Connec-

Power Air delivery Weight Dimensions
receiver pressure level tion
Model Code
l kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
Floor mounted compressor
DBS 8-08 V60KD92FDR071 – 7.5 10 1250 75 44.1 8 116 68 3/4" 185 407 80 x 70 x 98
DBS 8-10 V60KH92FDR071 – 7.5 10 1000 60 35.3 10 145 68 3/4" 185 407 80 x 70 x 98
DBS 8-13 V60KA92FDR071 – 7.5 10 750 45 26.5 13 188 68 3/4" 185 407 80 x 70 x 98
DBS 11-08 V60KF92FDR071 – 11 15 1650 99 58.2 8 116 69 3/4" 200 440 80 x 70 x 98
DBS 11-10 V60KE92FDR071 – 11 15 1500 90 53 10 145 69 3/4" 200 440 80 x 70 x 98
DBS 11-13 V60KB92FDR071 – 11 15 1100 66 38.8 13 188 69 3/4" 200 440 80 x 70 x 98
DBS 15-08 V60KP92FDR071 – 15 20 2150 129 75.9 8 116 70 3/4" 235 517 80 x 70 x 98
DBS 15-10 V60KQ92FDR071 – 15 20 1850 111 65.3 10 145 70 3/4" 235 517 80 x 70 x 98
DBS 15-13 V60KR92FDR071 – 15 20 1500 90 53 13 188 70 3/4" 235 517 80 x 70 x 98
DBS 16-08 V60KS92FDR071 – 15 20 2350 141 83 8 116 68 3/4" 240 528 80 x 70 x 98
DBS 16-10 V60KU92FDR071 – 15 20 2050 123 72.4 10 145 68 3/4" 240 528 80 x 70 x 98
DBS 16-13 V60KW92FDR071 – 15 20 1750 105 61.8 13 188 68 3/4" 240 528 80 x 70 x 98
With air receiver
DBS 8-08-270 V91KD92FDR071 270 7.5 10 1250 75 44.1 8 116 68 3/4" 245 541 155 x 70 x 151
DBS 8-10-270 V91KH92FDR071 270 7.5 10 1000 60 35.3 10 145 68 3/4" 245 541 155 x 70 x 151
DBS 11-08-270 V91KF92FDR071 270 11 15 1650 99 58.2 8 116 69 3/4" 260 574 155 x 70 x 151
DBS 11-10-270 V91KE92FDR071 270 11 15 1500 90 53 10 145 69 3/4" 260 574 155 x 70 x 151
DBS 8-08-500 V83KD92FDR071 500 7.5 10 1250 75 44.1 8 116 68 3/4" 307 678 198 x 70 x 163
DBS 8-10-500 V83KH92FDR071 500 7.5 10 1000 60 35.3 10 145 68 3/4" 307 678 198 x 70 x 163
DBS 11-08-500 V83KF92FDR071 500 11 15 1650 99 58.2 8 116 69 3/4" 322 711 198 x 70 x 163
DBS 11-10-500 V83KE92FDR071 500 11 15 1500 90 53 10 145 69 3/4" 322 711 198 x 70 x 163
DBS 15-08-500 V83KP92FDR071 500 15 20 2150 129 75.9 8 116 70 3/4" 357 788 198 x 70 x 163
DBS 15-10-500 V83KQ92FDR071 500 15 20 1850 111 65.3 10 145 70 3/4" 357 788 198 x 70 x 163
DBS 16-08-500 V83KS92FDR071 500 15 20 2350 141 83 8 116 68 3/4" 362 799 198 x 70 x 163
DBS 16-10-500 V83KU92FDR071 500 15 20 2050 123 72.4 10 145 68 3/4" 362 799 198 x 70 x 163
With air receiver and dryer
DBS 8-08-270 ES V91KD92FDR171 270 7.5 10 1250 75 44.1 8 116 68 3/4" 343 757 155 x 70 x 151
DBS 8-10-270 ES V91KH92FDR171 270 7.5 10 1000 60 35.3 10 145 68 3/4" 343 757 155 x 70 x 151
DBS 11-08-270 ES V91KF92FDR171 270 11 15 1650 99 58.2 8 116 69 3/4" 363 801 155 x 70 x 151
DBS 11-10-270 ES V91KE92FDR171 270 11 15 1500 90 53 10 145 69 3/4" 363 801 155 x 70 x 151
DBS 8-08-500 ES V83KD92FDR171 500 7.5 10 1250 75 44.1 8 116 68 3/4" 375 828 198 x 70 x 163
DBS 8-10-500 ES V83KH92FDR171 500 7.5 10 1000 60 35.3 10 145 68 3/4" 375 828 198 x 70 x 163
DBS 11-08-500 ES V83KF92FDR171 500 11 15 1650 99 58.2 8 116 69 3/4" 395 872 198 x 70 x 163
DBS 11-10-500 ES V83KE92FDR171 500 11 15 1500 90 53 10 145 69 3/4" 395 872 198 x 70 x 163
DBS 15-08-500 ES V83KP92FDR171 500 15 20 2150 129 75.9 8 116 70 3/4" 436 962 198 x 70 x 163
DBS 15-10-500 ES V83KQ92FDR171 500 15 20 1850 111 65.3 10 145 70 3/4" 436 962 198 x 70 x 163
DBS 16-08-500 ES V83KS92FDR171 500 15 20 2350 141 83 8 116 68 3/4" 436 962 198 x 70 x 163
DBS 16-10-500 ES V83KU92FDR171 500 15 20 2050 123 72.4 10 145 68 3/4" 436 962 198 x 70 x 163

ALL MODELS WITH TANK ARE ALSO AVAILABLE ON REQUEST WITH A WORKING PRESSURE OF 13 BAR, PROVIDING THE SAME PERFORMANCE OF MODELS ON GROUND.
Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 - 12.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 13
 intake TRANSMISSION
regulator Transmission between air-end
The electro-pneumatic system and electric motor is performed
adjusts compressor working to by Poly-V belts ensuring long
guarantee minimum pressure when life and minimum maintenance.
running idle and maximum saving
upon start-up.

Minimum
pressure valve
Built with oxide free material,
fully machined.
An ideal technical solution to
provide maximum reliability
in any operational conditions.

COOLING SYSTEM
The axial fan ensures the ideal
operating temperature, even in
extreme working conditions.
All air-oil circuit hoses are made of
rubber covered with a metal mesh
resistant to high temperature.

PREFILTERING
PANEL
The ventilation circuit is completed
by a cabinet prefiltering panel
(standard on every model)
that separates the incoming dusts and
it keeps clean the inside
of the machine.

DBS 18.5 - 22

Features and main strenghts:

All most important components of the compressor

are machined internally with highly evoluted process
controlled machines.
The cooling air flow, channeled by the thermostatic
controlled fan, cools down an oversized combined
oil/air heat exchanger: this lets the compressor run
also in severe temperature conditions.
FS50 TF air-end
The wide front and rear paneling grants ease of Completely designed and manufactured in DARI
access, reducing inspection and maintenance time. Italian facilities, just as the intake regulator
and separator block with minimum pressure/
Also available with dryer (ES). check valve. Every air-end is tested twice: as
a self-standing unit and during the complete
compressor test.

14 www.daricompressors.com
 18.5 / 22 kW DBS

ETIV
Advanced controller with backlit display
and extended multilingual messaging.
Functions available: weekly
programmable timer, remote control,
autorestart after power failure,
maintenance planning, alarm log,
multilevel diagnostic, phase sequence
relay to check air-end
direction of rotation.

DRYER
MODULE
The dryer module (ES)
provide clean, dry air that
improves the system’s
reliability, avoids costly
downtime and production
delays, and safeguards the
quality of the final product.

Compressor + Dryer

Working Noise Connec-

Power Air delivery Weight Dimensions
pressure level tion
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
DBS 18.5-08 V60QA92FDR071 18.5 25 2800 168 99 8 116 66 3/4" 350 774 135 x 80 x 113

DBS 18.5-10 V60QB92FDR071 18.5 25 2500 150 88 10 145 66 3/4" 350 774 135 x 80 x 113

DBS 18.5-13 V60QC92FDR071 18.5 25 2150 129 76 13 188 66 3/4" 350 774 135 x 80 x 113

DBS 22-08 V60QD92FDR071 22 30 3400 204 120 8 116 68 3/4" 380 840 135 x 80 x 113

DBS 22-10 V60QE92FDR071 22 30 3000 180 106 10 145 68 3/4" 380 840 135 x 80 x 113

DBS 22-13 V60QF92FDR071 22 30 2400 144 85 13 188 68 3/4" 380 840 135 x 80 x 113

With dryer

DBS 18.5-08 ES V60QA92FDR171 18.5 25 2800 168 99 8 116 66 3/4" 400 883 169 x 80 x 113

DBS 18.5-10 ES V60QB92FDR171 18.5 25 2500 150 88 10 145 66 3/4" 400 883 169 x 80 x 113

DBS 18.5-13 ES V60QC92FDR171 18.5 25 2150 129 76 13 188 66 3/4" 400 883 169 x 80 x 113

DBS 22-08 ES V60QD92FDR171 22 30 3400 204 120 8 116 68 3/4" 430 949 169 x 80 x 113

DBS 22-10 ES V60QE92FDR171 22 30 3000 180 106 10 145 68 3/4" 430 949 169 x 80 x 113

DBS 22-13 ES V60QF92FDR171 22 30 2400 144 85 13 188 68 3/4" 430 949 169 x 80 x 113

Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 - 12 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 15
 Oil filter and intake
separator regulator
filter The electro-pneumatic system
Both spin-on type, they adjusts compressor working to
ensure maximum efficiency guarantee minimum pressure when
and simple maintenance. running idle and maximum saving
upon start-up.

Minimum
pressure valve
Built with oxide free material,
fully machined.
An ideal technical solution to
provide maximum reliability
in any operational conditions.

COOLING
SYSTEM
The axial fan ensures the
ideal operating temperature,
even in extreme working
conditions.
All air-oil circuit hoses are
made of rubber covered with
a metal mesh resistant to
high temperature.

COOLING SYSTEM
The axial fan ensures the ideal
operating temperature, even in
extreme working conditions.

DBS 31 - 38
Features and main strenghts:

All major components of the compressor, such as the

intake regulator, minimum pressure/check valve and
separator unit, are designed and manufactured with highly
evoluted CNC machines.
The cooling air flow, channeled by the thermostatic
FS100
controlled fan, cools down an oversized combined oil/air
heat exchanger: this lets the compressor run in severe FS130
temperature conditions.
The wide front and rear paneling grants ease of access,
reducing inspection and maintenance time. FS100 - FS130 AIR-ENDS
Entirely designed and made in Italy, just as
Transmission between air-end and electric motor is performed the intake regulator and separator block with
by Poly-V belts ensuring long life and minimum maintenance. minimum pressure/check valve.
FS100 air-end is mounted on DBS 31 models.
Also available with dryer. FS130 air-end is mounted on DBS 38 models.

16 www.daricompressors.com
 30 / 37 kW DBS

ETIV
Advanced controller with backlit display
and extended multilingual messaging.
Functions available: weekly programmable
timer, remote control, autorestart after
power failure, maintenance planning,
alarm log, multilevel diagnostic, phase
sequence relay to check air-end
direction of rotation.

DRYER
MODULE
The dryer module (ES)
provide clean, dry air that
improves the system’s
reliability, avoids costly
downtime and production
delays, and safeguards the
quality of the final product.

Compressor + Dryer

Working Noise
Power Air delivery Connection Weight Dimensions
pressure level
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
DBS 31-08 V60BU92FDR071 30 40 4700 282 165.9 8 116 70 1 -1/4" 630 1392 153 x 84 x 145

DBS 31-10 V60BV92FDR071 30 40 4200 252 148.3 10 145 70 1 -1/4" 630 1392 153 x 84 x 145

DBS 31-13 V60BW92FDR071 30 40 3400 204 120 13 188 70 1 -1/4" 630 1392 153 x 84 x 145

DBS 38-08 V60BK92FDR071 37 50 6000 360 212 8 116 68 1 -1/4" 700 1547 153 x 84 x 145

DBS 38-10 V60BJ92FDR071 37 50 5300 318 187 10 145 68 1 -1/4" 700 1547 153 x 84 x 145

DBS 38-13 V60BI92FDR071 37 50 4000 240 141 13 188 68 1 -1/4" 700 1547 153 x 84 x 145

With dryer

DBS 31-08 ES V60BU92FDR171 30 40 4700 282 165.9 8 116 70 1 -1/4" 710 1567 186 x 84 x 145

DBS 31-10 ES V60BV92FDR171 30 40 4200 252 148.3 10 145 70 1 -1/4" 710 1567 186 x 84 x 145

DBS 31-13 ES V60BW92FDR171 30 40 3400 204 120 13 188 70 1 -1/4" 710 1567 186 x 84 x 145

DBS 38-08 ES V60BK92FDR171 37 50 6000 360 212 8 116 68 1 -1/4" 780 1721 186 x 84 x 145

DBS 38-10 ES V60BJ92FDR171 37 50 5300 318 187 10 145 68 1 -1/4" 780 1721 186 x 84 x 145

DBS 38-13 ES V60BI92FDR171 37 50 4000 240 141 13 188 68 1 -1/4" 780 1721 186 x 84 x 145

Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 - 12.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 17
 Reliable COOLING CIRCUIT
transmission An axial fan supplies the optimum
Transmission between air-end cooling air flow for the generously sized
and electric motor is performed air/oil cooler: safe operation in any
by Poly-V belts ensuring long life environmental condition with
and minimum maintenance. minimum noise level.

FiltERS
Double oil separator filter
for a long operating life
and compressed air quality.

intake
regulator
The electro-pneumatic system
adjusts compressor working to
guarantee minimum pressure
when running idle and maximum
saving upon start-up.

DBS 45 - 55
Features and main strenghts:

The superior components selection and the compact internal

layout make this range of compressors stand out in terms of
high performances and minimum footprint.
The cooling air flow, channeled by the thermostatic controlled
axial fan, cools down an oversized combined oil/air heat
exchanger: this let the compressor run in severe temperature
conditions.
The ventilation circuit is completed by a cabinet prefiltering
panel (standard on every model) that separates the incoming
dusts and it keeps clean the inside of the machine.
Wide front and rear access panels allow easy maintenance
and immediate check of all main components, reducing time
of inspection and maintenance.

18 www.daricompressors.com
 45 / 55 kW DBS
EXHAUST
CONVEYOR
Ensures a significant reduction of the
compressor noise and it is extremely
useful in case of using a canalization
for hot air extraction.

ETIV
Advanced controller with backlit display
and extended multilingual messaging.
Functions available: weekly programmable timer,
remote control, autorestart after power failure,
maintenance planning, alarm log, multilevel diagnostic,
phase sequence relay to check air-end
direction of rotation.

FS130 AIR-END
Entirely designed and made in Italy, just as the
intake regulator and separator block with
minimum pressure/check valve.

Working Noise
Power Air delivery Connection Weight Dimensions
pressure level
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
DBS 45-08 V60BM92FDR171 45 60 7200 432 254 7.5 109 72 1 -1/2" 910 2002 160 x 97 x 186
DBS 45-10 V60BN92FDR171 45 60 6500 390 229 10 145 72 1 -1/2" 910 2002 160 x 97 x 186
DBS 45-13 V60BQ92FDR171 45 60 5100 306 180 13 188 72 1 -1/2" 910 2002 160 x 97 x 186
DBS 55-08 V60BR92FDR071 55 75 8600 516 304 7.5 109 74 1 -1/2" 952 2094 160 x 97 x 186
DBS 55-10 V60BS92FDR071 55 75 7800 468 275 10 145 74 1 -1/2" 952 2094 160 x 97 x 186
DBS 55-13 V60BT92FDR071 55 75 6400 384 226 13 188 74 1 -1/2" 952 2094 160 x 97 x 186

Free air delivery as per ISO 1217 Annex C, at 7 - 9.5 - 12.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 19
 Reliable COOLING CIRCUIT
transmission An axial fan supplies the optimum
Transmission between air-end cooling air flow for the generously sized
and electric motor is performed air/oil cooler: safe operation in any
by Poly-V belts ensuring long life environmental condition with
and minimum maintenance. minimum noise level.

Minimum
pressure
valve
Built with oxide free material,
fully machined.
An ideal technical solution to
provide maximum reliability
in any operational conditions.

intake
regulator
The electro-pneumatic system
adjusts compressor working to
guarantee minimum pressure
when running idle and maximum
saving upon start-up.

DBS 56 - 75

Features and main strenghts:

Equipped with Poly-V belt drive, oversized combined heat

exchanger and thermostatic controlled axial fan which ensure
optimal operational temperatures.
High performance motors and the optimized selection of the
machine parts offers efficiency and reliability even in extreme
environmental conditions.
The ventilation circuit is completed by a cabinet prefiltering panel (standard on every model)
that separates the incoming dusts and it keeps clean the inside of the machine.
Main operating parameters are monitored by the ETIV controller that supports different
languages. The controller provides alarm indication and stores alarm events to facilitate
troubleshooting and routine maintenance planning.
Wide front and rear access panels allow easy maintenance and immediate check of all
main components, reducing time of inspection and maintenance.

20 www.daricompressors.com
 55 / 75 kW DBS
EXHAUST
CONVEYOR
Ensures a significant reduction
of the compressor noise and it is
extremely useful in case of using
a canalization for hot air extraction.

ETIV
Advanced controller with backlit display
and extended multilingual messaging.
Functions available: weekly programmable timer,
remote control, autorestart after power failure,
maintenance planning, alarm log, multilevel diagnostic,
phase sequence relay to check air-end
direction of rotation.

FS240 AIR-END
Entirely designed and made in Italy, just as
the intake regulator and separator block
with minimum pressure/check valve.

Working Noise
Power Air delivery Connection Weight Dimensions
pressure level
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
DBS 56-08 V60BA92FDR071 55 75 9300 558 328 7.5 109 70 2” 1650 3630 180 x 110 x 215
DBS 56-10 V60BB92FDR071 55 75 8300 498 293 10 145 70 2” 1650 3630 180 x 110 x 215
DBS 56-13 V60BC92FDR071 55 75 7000 420 247 13 188 70 2” 1650 3630 180 x 110 x 215
DBS 75-08 V60BD92FDR071 75 100 12200 732 431 7.5 109 72 2” 1720 3784 180 x 110 x 215
DBS 75-10 V60BE92FDR071 75 100 10500 630 371 10 145 72 2” 1720 3784 180 x 110 x 215
DBS 75-13 V60BF92FDR071 75 100 8300 498 293 13 188 72 2” 1720 3784 180 x 110 x 215

Free air delivery as per ISO 1217 Annex C, at 7 - 9.5 - 12.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 21
 Energy saving
Silent operation
Compact design
Low maintenance Pressure trend

Versions with dryer

9,5

9,0

High efficiency inverter 8,5 VS

8,0 ON/OFF

7,5

7,0

Management costs

Energy saving
20%
Energy
Energy costs 15% 52%
Service
13%

Investment
ON/OFF

VS

0% 20% 40% 60% 80% 100%

DBS VARIABLE SPEED

Energy costs and maintenance costs significantly exceed the initial investment in a Company.
The DARI range at Variable Speed, especially in systems with variable air consumption, ensures
the reduction of energy costs.
DBS 11, 22, 38, 56 and 75 models are also available as Variable Speed (VS), equipped with Inverter
option, that enables the compressor to adapt to the flow rate demanded by the application.
They are particularly suitable for those companies that use compressed air with frequently changing
flow: the variable frequency drive allows the machine to adjust the flow rate to the actual demand.
The ETIV electronic controller monitors and controls air-end speed, modulating the air production in order
to keep constant pressure in the network. Immediate advantages of this feature are the constant network
pressure, the optimized electric power consumption, matching the real compressed air demand, and the
minimum wear of the mechanical components, which are usually stressed during the idling/load switching
of the standard compressors.

22 www.daricompressors.com
 11 / 75 kW DBS VS

Air delivery Working Noise

Power Connection Weight Dimensions
(max. / min.) pressure level
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
DBS 11-08 VS V60SN97FDR071 11 15 1650 / 660 99 / 41 58 / 24 8 116 63 3/4" 271 598 120 x 70 x 100
DBS 11-10 VS V60SP97FDR071 11 15 1500 / 600 90 / 37 53 / 22 10 145 63 3/4" 271 598 120 x 70 x 100
DBS 22-08 VS V60SJ97FDR071 22 30 3400 / 1350 204 / 81 120 / 48 8 116 68 3/4" 390 861 135 x 80 x 113
DBS 22-10 VS V60SY97FDR071 22 30 3050 / 1220 183 / 73.2 108 / 43 10 145 68 3/4" 390 861 135 x 80 x 113
DBS 38-08 VS V60BK97FDR071 37 50 5600 / 2000 336 / 120 197 / 70 8 116 72 1 -1/4" 725 1600 153 x 84 x 145
DBS 38-10 VS V60BJ97FDR071 37 50 5000 / 1900 300 / 114 176 / 67 10 145 72 1 -1/4" 725 1600 153 x 84 x 145
DBS 56-08 VS V60BA97FDR071 55 75 9300 / 3700 558 / 222 328 / 131 7.5 109 70 2” 1686 3721 180 x 110 x 215
DBS 56-10 VS V60BB97FDR071 55 75 8300 / 3300 498 / 198 293 / 116 10 145 70 2” 1686 3721 180 x 110 x 215
DBS 75-08 VS V60BD97FDR071 75 100 12200 / 4800 732 / 288 431 / 169 7.5 109 72 2” 1756 3875 180 x 110 x 215
DBS 75-10 VS V60BE97FDR071 75 100 10500 / 4200 630 / 252 371 / 148 10 145 72 2” 1756 3875 180 x 110 x 215

Free air delivery as per ISO 1217 Annex C, at 7 - 9.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

INTEGRATED Dryer module

Dryer (DBS 22 and 38)
(DBS 11) Provide clean, dry air that
The fully integrated improves the system’s
refrigerated dryer and reliability, avoids costly
filtration allows for the downtime and production
constant supply of delays, and safeguards
compressed air that is the quality of the products.
both dry and free from oil
and other contaminants.

Air delivery Working Noise Connec-

Power Weight Dimensions
(max. / min.) pressure level tion
Model Code
kW HP l/min. m3/h c.f.m. bar p.s.i. dB(A) G kg lbs L x W x H (cm)
With dryer

DBS 11-08 ES VS V60SN97FDR171 11 15 1650 / 660 99 / 40 58 / 23 8 116 63 3/4" 306 675 120 x 70 x 100
DBS 11-10 ES VS V60SP97FDR171 11 15 1500 / 600 90 / 36 53 / 21 10 145 63 3/4" 306 675 120 x 70 x 100
DBS 22-08 ES VS V60SJ97FDR171 22 30 3400 / 1350 204 / 81 120 / 48 8 116 68 3/4" 440 971 169 x 80 x 113
DBS 22-10 ES VS V60SY97FDR171 22 30 3050 / 1220 183 / 73.2 108 / 43 10 145 68 3/4" 440 971 169 x 80 x 113
DBS 38-08 ES VS V60BK97FDR171 37 50 5600 / 2000 336 / 120 197 / 70 8 116 72 1 -1/4" 805 1777 186 x 84 x 145
DBS 38-10 ES VS V60BJ97FDR171 37 50 5000 / 1900 300 / 114 176 / 67 10 145 72 1 -1/4" 805 1777 186 x 84 x 145

Free air delivery as per ISO 1217 Annex C, at 7.5 - 9.5 bar at the compressor outlet.
± 3 dB (A) as PNEUROP/CAGI PN-NTC 2.3.

www.daricompressors.com 23
 Gross weights and dimensions

Gross Gross Gross Gross

Model Code weight dimensions Model Code weight dimensions

kg lbs L x W x H (cm) kg lbs L x W x H (cm)

DBS SE 2.2-10 M V51JT60FDR071 96.5 212.7 71.5 x 67 x 95 DBS 5.5-08-270 ES V91JW92FDR171 249.5 550.1 172 x 75 x 168

DBS SE 2.2-08 V51JU72FDR071 98 216.1 71.5 x 67 x 97 DBS 5.5-10-270 ES V91JO92FDR171 249.5 550.1 172 x 75 x 168

DBS SE 2.2-10 V51JT72FDR071 98 216.1 71.5 x 67 x 97 DBS 5.5-08-500 ES V83JW92FDR171 300 661.4 206.5 x 80 x 177

DBS SE 3-08 V51JS72FDR071 103 227.1 71.5 x 67 x 97 DBS 5.5-10-500 ES V83JO92FDR171 300 661.4 206.5 x 80 x 177

DBS SE 3-10 V51JQ72FDR071 116 255.7 71.5 x 67 x 97 DBS 8-08 V60KD92FDR071 197 434.3 94 x 77 x 115

DBS SE 4-08 V51JR72FDR071 104 229.3 71.5 x 67 x 97 DBS 8-10 V60KH92FDR071 197 434.3 94 x 77 x 115

DBS SE 4-10 V51JP72FDR071 104 229.3 71.5 x 67 x 97 DBS 8-13 V60KA92FDR071 197 434.3 94 x 77 x 115

DBS SE 2.2-10-200 M V77JT60FDR071 169 372.6 152.5 x 61 x 146 DBS 11-08 V60KF92FDR071 212 467.4 94 x 77 x 115

DBS SE 2.2-08-200 V77JU72FDR071 200 440.9 152.5 x 61 x 146 DBS 11-10 V60KE92FDR071 212.5 468.5 106 x 77 x 117

DBS SE 2.2-10-200 V77JT72FDR071 169 372.6 152.5 x 61 x 146 DBS 11-13 V60KB92FDR071 212 467.4 94 x 77 x 115

DBS SE 3-08-200 V77JS72FDR071 174 383.6 152.5 x 61 x 146 DBS 15-08 V60KP92FDR071 247 544.5 94 x 77 x 115

DBS SE 3-10-200 V77JQ72FDR071 174 383.6 152.5 x 61 x 146 DBS 15-10 V60KQ92FDR071 247 544.5 94 x 77 x 115

DBS SE 4-08-200 V77JR72FDR071 175.5 386.9 152.5 x 61 x 146 DBS 15-13 V60KR92FDR071 247 544.5 94 x 77 x 115

DBS SE 4-10-200 V77JP72FDR071 223.5 492.7 152.5 x 61 x 146 DBS 16-08 V60KS92FDR071 252 555.6 94 x 77 x 115

DBS SE 2.2-08-200 ES V77JU72FDR171 199 438.7 152.5 x 61 x 146 DBS 16-10 V60KU92FDR071 252 555.6 94 x 77 x 115

DBS SE 2.2-10-200 ES V77JT72FDR171 200 440.9 152.5 x 61 x 146 DBS 16-13 V60KW92FDR071 252 555.6 94 x 77 x 115

DBS SE 3-08-200 ES V77JS72FDR171 205 451.9 152.5 x 61 x 146 DBS 8-08-270 V91KD92FDR071 280.5 618.4 172 x 75 x 176

DBS SE 3-10-200 ES V77JQ72FDR171 205 451.9 152.5 x 61 x 146 DBS 8-10-270 V91KH92FDR071 280.5 618.4 172 x 75 x 176

DBS SE 4-08-200 ES V77JR72FDR171 223.5 492.7 152.5 x 61 x 143 DBS 11-08-270 V91KF92FDR071 295.5 651.5 172 x 75 x 176

DBS SE 4-10-200 ES V77JP72FDR171 223.5 492.7 152.5 x 61 x 143 DBS 11-10-270 V91KE92FDR071 335 738.5 172 x 75 x 176

DBS 4-08 V51JR92FDR071 102.5 226 71.5 x 67 x 95 DBS 8-08-500 V83KD92FDR071 345 760.6 206.5 x 80 x 185

DBS 4-10 V51JP92FDR071 102.5 226 71.5 x 67 x 95 DBS 8-10-500 V83KH92FDR071 345 760.6 206.5 x 80 x 185

DBS 4-13 V51JV92FDR071 102.5 226 71.5 x 67 x 95 DBS 11-08-500 V83KF92FDR071 360 793.7 206.5 x 80 x 185

DBS 5.5-08 V51JW92FDR071 136 299.8 71.5 x 67 x 97 DBS 11-10-500 V83KE92FDR071 360 793.7 206.5 x 80 x 185

DBS 5.5-10 V51JO92FDR071 136 299.8 71.5 x 67 x 97 DBS 15-08-500 V83KP92FDR071 395 870.8 206.5 x 80 x 185

DBS 5.5-13 V51JM92FDR071 136 299.8 71.5 x 67 x 97 DBS 15-10-500 V83KQ92FDR071 395 870.8 206.5 x 80 x 185

DBS 4-08-200 V77JR92FDR071 176.5 389.1 152.5 x 61 x 143 DBS 16-08-500 V83KS92FDR071 421 928.1 206.5 x 80 x 185

DBS 4-10-200 V77JP92FDR071 176.5 389.1 152.5 x 61 x 143 DBS 16-10-500 V83KU92FDR071 421 928.1 206.5 x 80 x 185

DBS 4-13-200 V77JV92FDR071 196 432.1 152.5 x 61 x 146 DBS 8-08-270 ES V91KD92FDR171 378.5 834.4 172 x 75 x 176

DBS 5.5-08-270 V91JW92FDR071 237.5 523.6 172 x 75 x 168 DBS 8-10-270 ES V91KH92FDR171 378.5 834.4 172 x 75 x 176

DBS 5.5-10-270 V91JO92FDR071 237.5 523.6 172 x 75 x 168 DBS 11-08-270 ES V91KF92FDR171 398.5 878.5 172 x 75 x 176

DBS 5.5-08-500 V83JW92FDR071 265.5 585.3 206.5 x 80 x 177 DBS 11-10-270 ES V91KE92FDR171 398 877.4 172 x 75 x 176

DBS 5.5-10-500 V83JO92FDR071 265.5 585.3 206.5 x 80 x 177 DBS 8-08-500 ES V83KD92FDR171 413 910.5 206.5 x 80 x 185

DBS 4-08-200 ES V77JR92FDR171 206.5 455.3 152.5 x 61 x 143 DBS 8-10-500 ES V83KH92FDR171 413 910.5 206.5 x 80 x 185

DBS 4-10-200 ES V77JP92FDR171 206.5 455.3 152.5 x 61 x 143 DBS 11-08-500 ES V83KF92FDR171 432.5 953.5 206.5 x 80 x 177

DBS 4-13-200 ES V77JV92FDR171 196 432.1 152.5 x 61 x 146 DBS 11-10-500 ES V83KE92FDR171 432.5 953.5 206.5 x 80 x 177

24 www.daricompressors.com
 Gross weights and dimensions

Gross Gross Gross Gross

Model Code weight dimensions Model Code weight dimensions

kg lbs L x W x H (cm) kg lbs L x W x H (cm)

DBS 15-08-500 ES V83KP92FDR171 474 1045 206.5 x 80 x 185 DBS 45-08 V60BM92FDR171 950 2094.4 118 x 175 x 202

DBS 15-10-500 ES V83KQ92FDR171 476 1049.4 206.5 x 80 x 185 DBS 45-10 V60BN92FDR171 950 2094.4 118 x 175 x 202

DBS 16-08-500 ES V83KS92FDR171 495 1091.3 206.5 x 80 x 185 DBS 45-13 V60BQ92FDR171 950 2094.4 118 x 175 x 202

DBS 16-10-500 ES V83KU92FDR171 495 1091.3 206.5 x 80 x 185 DBS 55-08 V60BR92FDR071 992 2187 170 x 106 x 204

DBS 18.5-08 V60QA92FDR071 398 877.4 150 x 95 x 134 DBS 55-10 V60BS92FDR071 992 2187 170 x 106 x 204

DBS 18.5-10 V60QB92FDR071 398 877.4 150 x 95 x 134 DBS 55-13 V60BT92FDR071 992 2187 170 x 106 x 204

DBS 18.5-13 V60QC92FDR071 398 877.4 150 x 95 x 134 DBS 56-08 V60BA92FDR071 1676.5 3696 190 x 120 x 233

DBS 22-08 V60QD92FDR071 409 901.7 150 x 95 x 134 DBS 56-10 V60BB92FDR071 1676.5 3696 190 x 120 x 233

DBS 22-10 V60QE92FDR071 432 952.4 150 x 95 x 130 DBS 56-13 V60BC92FDR071 1676.5 3696 190 x 120 x 233

DBS 22-13 V60QF92FDR071 421.5 929.2 150 x 95 x 131 DBS 75-08 V60BD92FDR071 1746.5 3850.4 190 x 120 x 233

DBS 18,5-08 ES V60QA92FDR171 451 994.3 197 x 94 x 160.5 DBS 75-10 V60BE92FDR071 1746.5 3850.4 190 x 120 x 233

DBS 18,5-10 ES V60QB92FDR171 451 994.3 197 x 94 x 160.5 DBS 75-13 V60BF92FDR071 1746.5 3850.4 190 x 120 x 233

DBS 18,5-13 ES V60QC92FDR171 451 994.3 197 x 94 x 160.5 DBS 11-08 VS V60SN97FDR071 276 608.5 136 x 78 x 121

DBS 22-08 ES V60QD92FDR171 462 1018.5 197 x 94 x 160.5 DBS 11-10 VS V60SP97FDR071 276 608.5 136 x 78 x 121

DBS 22-10 ES V60QE92FDR171 478 1053.8 197 x 94 x 162 DBS 22-08 VS V60SJ97FDR071 451 994 162 x 78 x 128

DBS 22-13 ES V60QF92FDR171 477.5 1052.7 197 x 94 x 160 DBS 22-10 VS V60SY97FDR071 451 994 162 x 78 x 128

DBS 31-08 V60BU92FDR071 664 1463.9 165 x 95.5 x 164 DBS 38-08 VS V60BK97FDR071 759 1673.3 165 x 95.5 x 163

DBS 31-10 V60BV92FDR071 664 1463.9 165 x 95.5 x 164 DBS 38-10 VS V60BJ97FDR071 759 1673.3 165 x 95.5 x 163

DBS 31-13 V60BW92FDR071 664 1463.9 165 x 95.5 x 164 DBS 56-08 VS V60BA97FDR071 1751.5 3861.4 190 x 120 x 233

DBS 37-08 V60BX92FDR071 678 1494.7 164 x 94 x 161 DBS 56-10 VS V60BB97FDR071 1751.5 3861.4 190 x 120 x 233

DBS 37-10 V60BY92FDR071 678 1494.7 164 x 94 x 161 DBS 75-08 VS V60BD97FDR071 1821.5 4015.7 190 x 120 x 233

DBS 37-13 V60BZ92FDR071 678 1494.7 164 x 94 x 161 DBS 75-10 VS V60BE97FDR071 1821.5 4015.7 190 x 120 x 233

DBS 38-08 V60BK92FDR071 700 1543.2 164 x 94 x 161 DBS 11-08 ES VS V60SN97FDR171 306.5 675.7 136 x 78 x 121

DBS 38-10 V60BJ92FDR071 734 1618.2 165 x 95.5 x 163 DBS 11-10 ES VS V60SP97FDR171 306.5 675.7 136 x 78 x 121

DBS 38-13 V60BI92FDR071 700 1543.2 164 x 94 x 161 DBS 22-08 ES VS V60SJ97FDR171 535 1179.5 162 x 78 x 128

DBS 31-08 ES V60BU92FDR171 750 1653.5 198 x 95.5 x 163 DBS 22-10 ES VS V60SY97FDR171 535 1179.5 162 x 78 x 128

DBS 31-10 ES V60BV92FDR171 750 1653.5 198 x 95.5 x 163 DBS 38-08 ES VS V60BK97FDR171 845 1862.9 198 x 95.5 x 163

DBS 31-13 ES V60BW92FDR171 750 1653.5 198 x 95.5 x 163 DBS 38-10 ES VS V60BJ97FDR171 845 1862.9 198 x 95.5 x 163

DBS 38-08 ES V60BK92FDR171 789.5 1740.5 197 x 94 x 161

DBS 38-10 ES V60BJ92FDR171 820 1807.8 198 x 95.5 x 163

DBS 38-13 ES V60BI92FDR171 789.5 1740.5 197 x 94 x 161

W
L

www.daricompressors.com 25
 Maintenance Kit and lubricants
Our FSN original spare parts have been rigorously selected, checked and tested by specialised technicians to ensure the
utmost efficiency and endurance of the compressor.
The parts are stocked in our centralised and automated warehouse in Zola Predosa (BO) - Italy, where 12,000 part codes
on 10,000 sqm are managed every day. Specialised staff are continuously in contact with our distribution centres worldwide,
to deliver spare parts to our customers in the shortest possible time.
The use of FSN Long Life Kit, specifically studied for screw compressors, extends maintenance intervals, cutting down
service costs and ensuring consistent product performance. Ask for the catalog with reference codes, suitable for all DBS
screw compressors.

Long Life Kit for screw compresors scheduled maintenance

1.000 h 2.000 h 4.000 h * 6.000 h 8.000 h 12.000 h

(or every year) (or every year)

KIT A KIT B KIT C KIT D KIT E

1 Air filter 1 Air filter cartridge 1 x 2,000 h kit 1 x 2,000 h kit 1 x 4,000 h kit 1 x 4,000 h kit
DBS 2.2 - 5.5 kW cartridge 1 Oil filter cartridge 1 Oil check valve 1 Poly-V belt 1 Minimum pressure 1 Poly-V belt
1 Separator valve kit 1 Solenoid valve
cartridge

1 Air filter 1 Air filter cartridge 1 x 2,000 h kit 1 x 4,000 h kit 1 x 4,000 h kit
DBS 7.5 - 15 kW cartridge 1 Oil filter cartridge 1 Oil check valve 1 Minimum pressure 1 Solenoid valve
1 Separator valve kit
cartridge 1 Poly-V belt

1 Air filter cartridge 1 Air filter cartridge 1 x 4,000 h kit 1 x 4,000 h kit
1 Oil filter cartridge 1 Minimum pressure 1 Poly-V belt
1 Separator cartridge ≤ 45 kW valve kit 1 Solenoid valve
DBS 18.5 - 75 kW 2 Separator cartridges ≥ 55 kW
1 Oil check valve ≤ 45 kW
2 Oil check valves ≥ 55 kW
1 Prefilter

1 Air filter cartridge * or every year 1 x 4,000 h VS kit 1 x 4,000 h VS kit

1 Air filter cartridge 1 Minimum pressure 1 Poly-V Belt
1 Oil filter cartridge valve kit 1 Solenoid valve
1 Separator cartridge ≤ 45 kW
DBS VS 11 - 75 kW 2 Separator cartridges ≥ 55 kW
1 Oil check valve ≤ 45 kW
2 Oil check valves ≥ 55 kW
1 Prefilter
1 Electric cabinet prefilter

We recommend to change oil at the indicated intervals (see the user's manual) or every year. We suggest to use our RotEnergyPlus oil (NOT INCLUDED IN THE
LONG LIFE KIT). See table below.

RotEnergy synthetic lubricants

RotEnergy lubricants are specially designed for rotary screw
compressors to achieve rapid water separation, lower friction,
enhanced energy savings, longer maintenance intervals
and excellent bearing lubrication while offering superior rust
and corrosion protection.
RotEnergyFood is a high quality food-grade rotary compressor
lubricant, specifically designed for use in the food and beverage
industries to meet their production quality standards.

#600000018A Oil RotEnergyPlus 46 cSt - 3.8 Ltr bottle (3.25 kg)

#600000009A Oil RotEnergyPlus 46 cSt - set of four (3.8 Ltr / 3.25 kg) bottles.

#600000007A Oil RotEnergyPlus 46 cSt - 19 Ltr bottle (16 kg)

#600000012A Oil RotEnergyPlus 46 cSt - 208 Ltr drum (181 kg)

#600000014A Oil RotEnergyFood 46 cSt - set of four (3.9 Ltr / 3.25 kg) bottles.

#600000016A Oil RotEnergyFood 46 cSt - 19 Ltr bottle (18.5 kg)

#600000017A Oil RotEnergyFood 46 cSt - 208 Ltr drum (175 kg)

DARI offers a wide range of accessories to complete the compressor room. Control units for the operation of two or more
compressors, connecting pipes to the tank or to the dryer. For other products related to air treatment please ask for the
dedicated catalog.

26 www.daricompressors.com
After-sale services
Besides manufacturing products of the highest quality and technological content,
DARI offers its customers a service that meets their demands. The first objective is to
guarantee an all-round technical and marketing support, identifying their needs and
offering the most suitable solutions, nurturing a relation of mutual cooperation and
trust over time. DARI has a skilled and motivated team that can provide several
services: a call center help-desk, technical on-site consultation, customized
price quotes, turnkey projects, maintenance plans, update courses, etc.

Our “Hot-Line” service can

“Hot-Line” Service: prepare and ship urgent
fast shipment of spare parts spare parts orders within a day
(if received before 12.00 p.m.).

Our FSN brand guarantees the origins of

all components, which are specifically
manufactured and tested to be used
on our compressors.
A proper and scheduled maintenance
ensures longevity and efficiency of the Original
compressor. For this purpose DARI Spare Parts
suggest the use of FSN “Long Life Kit” & Long Life kit
for screw compressors.

We offer planned
2-year Warranty service agreements,
on air-end, electronic controller with the option of
and inverter. extending the
Warranty.

On the DARI website, it is possible

to check out the exploded views On-line
and spare parts lists for any compressor consultation
model whenever needed. of exploded views
and spare parts lists
www.daricompressors.com
From 1959 to present, DARI has joined its name
to the evolution of the world of compressed
air. A brand that has constantly improved the
performances of its products through innovative
design solutions and the constant research and
use of materials that allow higher yields and
reduction of energy costs.
The entire production procedure is carried out
at the Italian manufacturing plants of the Group.
All of the compressor main components: air-
end, intake regulator and minimum pressure
valve are manufactured based on project
specifications owned by DARI.
Assembling and testing performed on auto-
mated lines, robotic systems of the latest
generation, and computer tools for design
and control are the main investments that the
company has implemented to realise products
that meet the market’s quality standards.

Authorized Distributor:
500 - 01/2017 - 9990014

FNA S.p.A.
Via Einaudi, 6 - 10070 Robassomero - Torino - ITALY
Tel. +39 011 - 9233000 - Fax +39 011 9241138
www.daricompressors.com
info@fnacompressors.com

The models and specifications reported in this catalogue may be subject to change without prior notice.