Scribd
Upload
512 views1 page

Welding Safety Risk Assessment

1. The document assesses risks associated with welding work and provides current control measures. It identifies hazards like electric shock, respiratory issues from fumes, eye injuries from welding arcs, and falls from working at heights. 2. Control measures include using trained personnel, permits for hot work, barricades, insulation, separate earthing, protective equipment, ventilation, and safety harnesses. 3. Residual risks after controls are implemented are rated on a probability and consequence scale, with welding risks rated at 2 for probability and 0 for consequence, and fall of man risks rated at 1 for probability and 2 for consequence.

Uploaded by

Guddu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
512 views1 page

Welding Safety Risk Assessment

1. The document assesses risks associated with welding work and provides current control measures. It identifies hazards like electric shock, respiratory issues from fumes, eye injuries from welding arcs, and falls from working at heights. 2. Control measures include using trained personnel, permits for hot work, barricades, insulation, separate earthing, protective equipment, ventilation, and safety harnesses. 3. Residual risks after controls are implemented are rated on a probability and consequence scale, with welding risks rated at 2 for probability and 0 for consequence, and fall of man risks rated at 1 for probability and 2 for consequence.

Uploaded by

Guddu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Risk Assessment/Management Form

Ref:
Section / Dept: civil Activity: Risk Assessment Location:
Contractor :- for welding Work

Current control measure Risk rating

Probabil
ity
Sl Basic Job Potential Consequen Initi Additio Ri

Probabil

l risk
Residua
ity
No. Steps Hazard ce al nal s
Risk control k
measur ra
e ti
P E A R P
n E A R
Only trained & Exp. Personnel g
shall be allowed for welding
Work should be done after taking
hot work permit
Area should be barricaded before
starting the work

Before starting the activity working


Get injury area should be properly inspected
Electric Shock Respiratory for avoiding Flammable materials
Problem
Welding holder should be heavily
insulated

Welding M/c should be connected


with separate earthing
1 Welding 2 0 0 2 2 4
Use of good quality leather hand
gloves (Dry Condition)

Looking at welders ARC should be


avoided while working with in the
vicinity of welding
Damage of
Eye Injury Use welding screen of correct
both Eyes
specification
Apply liquid drop & take doctor
advice if serious
The atmosphere inside the welders
Respiratory
can be removes & replenish by
problem Arise
Fumes of fresh airs
Welding
Fainting
Provide ventilation
resulted in Fall

Use of full body safety harness


with double lynyard and the
anchoring points for its hooks must
be ensured.
Working at Get Working plateorm if required to be
2 Fall of man 2 0 0 1 2 4
height injury/Fatality made for every 2.1m with double
railings,toeguard and scaffolding
staging ladder as access whose
rungs are not spaced greater than
500mm
Prepared By Approved By Reviewed By
Contractor Contractor
Date Date Date
1of1

You might also like