DI

NESH
T
UBEI
NDI
A
 DINESH TUBE (INDIA) – COMPANY PROFILE
VENDOR NAME DINESH TUBE (INDIA)
REGISTERED
3/76, Hararwalla Building, Near Alankar Thatre, Khetwadi, Girgaon,
ADMINISTRATIVE
Mumbai, Maharashtra 400004
OFFICE
PLOT NO. 1279 & 1071, ROAD NO.14, STEEL WEREHOUSING COMPLEX,
WARE HOUSE
STEEL MARKET YARD, KOLAMBOLI, NAVI MUMBAI - 410218
TEL NO. 91-22 –43471889
FAX NO. 022 – 23880767
E-MAIL ID. dineshtube@yahoo.com
sales@dineshtube.com
WEBSITE www.dineshtube.com
CONTACT PERSON
KAMLESH SHETH, DEEPAK SHETH
NAME
MOBILE NO. 9833006252, 9969452975
TYPE OF
PROPRIETORSHIP
ORGANISATIN
Incorporation Date 16/06/2010
CERTIFICATE OF
REGISTRATION 760145919/commercial II
NO.
ISO certificate No. 9001:2015
Quality management
system
ISSUING
MOODY INTERNATIONAL CERTIFICATION LTD.
AUTHORITY
CST/VAT/TIN NO. 27140374291 C, 27140374291 V
AADHAR NO. 4224 2981 8014
PAN NO. / AVKPS0555R
IEC CODE 0305034049
ECC NO. AVKPS0555RXD001
Excise Range I
Excise Division A A
Excise Collectorate Mumbai –I
GST NO. 27AVKPS0555R1ZP
NATURE OF
Exporter, Stockist & Dealer
BUSINESS
Raw Materials: Pipes, Tubes, Plates, Sheets, Fittings, Coils, Rods, Flange, etc.
PRODUCTS Process Equipment: Heat Exchanger, Pressure Vessel, Reactor, Columns &
Towers, Tanks, etc.
Name & Add. of ICICI BANK LIMITED, Lamington road Branch 396/410, Shamitha Terrace
Banker Lamington Road, Opera House Mumbai – 400004.
Bank Account No. 034805003576
IFSC- ICIC0000348
MICR 400229044
MSME NO. 27232100756
MSME CLASS MICRO-1
MSME SERVICE Trading in Ferrous & Non-Ferrous Metals
MSME Date of Issue 31.01.2013

1
www.dineshtube.com
 COMPANY HISTORY
With major reforms taking place in the construction and Infrastructure in India post
2000, Mr. Kamlesh Sheth, a young entrepreneur from Mumbai, India thought of
starting his entrepreneurial venture through Dinesh Tube (India) in 2006.Dinesh tube (
India)’s major competency was sourcing products from quality manufacturers that are
either scarcely manufactured in India or not manufactured in India. Through this
competency it developed exceptional relations with worldclass mills from Japan,
Europe, India, USA, Korea and China.

At an early age, the company managed to supply high quality materials to major PSUs
of the country. Vendor Enlistment in Rourkela steel plant was a major breakthrough
followed by major PSUs like NTPC, SAIL, Damodar Valley corporation.

Dinesh Tube ( India) believes in “Reliability and Trust” since inception and this is the
reason why its tagline is “ Your Reliable partner Business partner in steel”. Today’s its
mission is to become a reliable business partner of all growth oriented organizations of
the country.

PRODUCT PROFILE

PRODUCT PROFILE

PRODUCTS RANGE EQUIPMENT MATERIAL OF CONST.

1. Pipes 1. Heat Exchanger 1.Titanium
2. Tubes 2. Pressure Vessel 2.Tantalum
3. Pipe Fittings 3. Reactor 3.Nickel & Nickel Alloys
4. Tube Fittings 4. Column 4.Hastelloy
5. Sheets 5. Tower 5.Zirconium
6. Plates 6. Tank 6.Inconel
7. Coils Etc. 7. Monel
8. Wire 8. Duplex Steel
9. Rods & Bars 9. Super Duplex Steel
10.Flanges 10.Stainless Steel
11. Valves 11.Carbon Steel
ETC. 12. Alloy Steel
13. Copper & Copper Alloys
ETC.

2
www.dineshtube.com
 GLOBAL SOURCING CAPABILITIES
COMPANY COUNTRY PRODUCTS ROLES CERTIFICATION
NAME
Sandvik Sweden Seamless Steel Importer Shell Approved
Pipes
Nippon Steel Japan Seamless Steel Importer Shell Approved
Corporation Pipes
Sumitomo Japan Seamless Steel Importer Shell/EIL Approved
Pipes
Tubos Reunidos Spain Seamless Steel Importer Llyods Approved
Pipes
Centravis Ukraine Seamless Steel Importer
Pipes
Tenaris Dalmine Italy Seamless Steel Importer Llyods Approved
Pipes
JFE Steel Japan Seamless Steel Importer Llyods Approved
Pipes
Tubacex Spain Duplex Steel Importer Llyods Approved
Pipes
TMK Group Romania Seamless Steel Importer Llyods Approved
Pipes
HENGYANG CHINA All Types of Importer Shell/EIL Approved
VALIN GROUP Pipes
Kobe Steel Japan Special Stainless Importer
Pipes
Ilta Inox Italy Steel Pipes, Importer
Stainless ERW
Posco Korea Steel Plates, Coils Importer
Byelorussian Ukraine Seamless Steel Importer
Steel Works Pipes
JINDAL STEEL INDIA Seamless Pipes Traders
Ratnamani India Pipes, tubes Traders
Maharashtra India Seamless Pipes Trader
Seamless Ltd
Salzgitter Italy Seamless Steel Importer
Mannesmann Pipes
Thyssen Krupp Germany Seamless Pipes Importer
Unifit Turkey C.S Fittings Importer
Nikopol Ukraine Seamless Pipes Importer
Aston Fittings United Kingdom Stainless Fittings Importer
Van leeuwen Netherland SS Pipes Importer

3
www.dineshtube.com
 QUALITY ASSURANCE PLAN
Strict quality assurance system is being followed in all our departments and Total Quality Management is
applied to streamline and all the procedures and practices in operation to achieve high standard of efficiency.
Continuous efforts are being made for improvement of materials technology and equipments to give best
quality products at the most affordable prices.

The quality assurance dept oversees all important quality functions and performs the following activities :

1) The system controls the quality of all incoming materials as per the raw material test certificate of the
material. Randomly checking in each size for chemical and physical properties at government approved
laboratory (NABL approved).

2) During forming pressing forging and heat treatment process control system outlines in process checks and
controls to be followed during heat treatment and testing.

3) Suitable Japanese techniques like kanban and pokayoke are used to maintain the accuracy of all the stages
of production.

4) Materials are supplied with test certificate as per approved QAP. Test certificates incorporate chemical
composition, mechanical properties hardness detail of heat treatment ultrasonic test radiography test and
stamping details

5) We also do PMI (Positive Material Identification) of all materials before offering for inspection to our
client.

6) Client is called for Inspection of materials. After acceptance materials are packed as per standard
requirements and dispatched immediately.

RELIABLE QUALITY GOODS FOR QUALITY PROJECTS...

 Our main objective is customer satisfaction
 We believe in bridging the gap in the industry by providing materials that cannot be supplied by
manufacturers irrespective of
 We develop quality objectives at appropriate level to ensure those requirements are effectively addressed
in our business.
 We are fully committed to continuous improvement as a strategic approach to achieve these quality
objectives.
 Our policy and associated quality objectives are reviewed and communicated to all employees on a
regular basis.

4
www.dineshtube.com
 STRENGTHS OF DINESH TUBE ( INDIA)
 Experts at supplying Boiler/Heat Exchanger/IBR approved tubes and big OD pipes
 Well Qualified Professionals
 Strong network base with manufacturers at a global level and stockiest in Europe and
UAE
 Timely delivery and cost effective balance
 Strict adherence to international standards
 Client referrals with navratna status companies of India
 Long term relationship orientation
 Ready stock of materials to cater even to your small requirements.
 Young and ambitious organization

THIRD PARTY INSPECTION

Dinesh Tube (India) offers its products to client with third party inspection also. The inspection
agency can be nominated by clients also or We arrange the Third Party Inspection by world reputed
Third Party Inspection Agencies like Bureau Veritas, Lloyds Register, SGS, IRS, and many others.

THIRD PARTY INSPECTION AGENCIES SERVICES UNDER OUR SCOPE

Tecnimont ICB Limited : ICB
DET Norske Veritas : DNV
Fact Engineering And Design Organisation : FEDO
Projects & Developments India Limited : PDIL
Baxcounsel Inspection Bureau Pvt. Ltd. : Baxcounsel
Bureau Veritas Industrial Services (India) Pvt. Ltd. : BVIS
Industrial Consultancy And Inspection Services : ICIS
Metallurgical & Engineering Consultants (India) Ltd. : MECON
Nuclear Power Corporation Of India Ltd. : NPCL
Engineers India Limited : EIL
Bharat Heavy Electricals Limited : BHEL
UHDE India Limited : UHDE
Pipecon Consultants (India) Pvt. Ltd : PIPECON
Indian Boiler Regulations : IBR

5
www.dineshtube.com
 Product Range
Pipes & Tubes Sheets & Plates

STAINLESS STEEL: CARBON & ALLOY STEEL:

ASTM A-213, A-269, A-312, A-358, A-249, A240, A-479, Normalized, Normalized & Tempered, Water Quenched
TP-304, 304L, 304H, 316, 316L, 316H, 316TI, 317, 317L 312, ASTM A-516 Gr. 60 & 70, ASTM A-387 Gr.11, 12, 22, 5, 9, 91
347, 309, 310, 310S, 409, 410 etc. in all required size & Corten A & Corten B.
specifications. 400BHN & 500BHN Abrasion Resistant Plates
High Yield Steel S690 QL & S700MC
CARBON STEEL: High Manganese Steel Plates.
ASTM A-106 GR. A, B&C, A-333, GR.I & 6, A-53 GR. A&B, Stainless, Duplex, Super Duplex Steels.
ASTM A-210 GR, A-1,BS 3059, PART I&II, SA 179, IS Nickel Alloys.
1233,PART I IS 3589 GR 3301 410, etc. in shapes & sizes. Aluminium Alloys, Copper & Cupro Nickel Sheets.

ALLOY STEEL :
SA/A 213 T11, T12, T22, T5, T9, T91
SA /A-335-P11,P22,P5,P9,P91
SA 691 ½ CR, 1CR, 11/4CR, 21/4CR, 5CR, 9CR, 91CR.

Buttweld fittings & Socketweld fittings Flanges

PIPE FITTINGS: FLANGES:

BW/SW/SRD/Forged & Compression type with errules such C S. S S. A S. Forged Flanges Size: ½” to 24” SORF, BLRF,
as ELBOW , TEES, REDUCERS, STUBENDS FLANGES, WNRF from ready stock Grade: ASTM A-105 & ASTM A-182
UNIONS, CAPS, NIPPLES, COUPLING, ELBOWLETS, F304, F316
WELDOLETS, NUTS, BOLTS, STUDS, WASHERS, VALVES &
GASKETS etc. A182,A-194, A-234, WPB, A - 350 LF, A - 403 FERRULE FITTINGS: In Single ferrule, double ferrule in
WP, A - 120, WPL as per dimension ANSI B- 36.10, B36.90, the shape of CONNECTER UNION, RED UNION, UNION
B16.5, B - 16.9, B- 16.11 & B- 16.18 etc. TEE, UNION ELBOW, BULK HEAD UNION CROSS ETC. .

www.dineshtube.com
7
 Nickel Alloy Piping & Tubing Specialists
NICKEL 200 / 201
Commercial pure nickel with good mechanical properties and excellent resistance to to may corrosive media. Important characteristic are
its magnetic and magnetostrictive properties, the high thermal and electrical conductivity at low gas content.

MONEL 400 (ALLOY 400)

Alloy 400 is especially resistant to salino and other acids in ventilated condition. It is successfully employed in the salt winning process. Alloy
400 is especially suited for employment in sea breakage water at high speed, where resistance against cavitation and erosion is of great
importance. This alloy is very resistant to solvents, glass etching agents. sulphuric and other acids and virtually to all alkalis. This grade is not
sensitive to stress corrosion cracking in oxidizing media. Alloy 400 can be employed at temperatures up to 5500 Celsius.

MONEL K-500 (ALLOY K-500)

An age-hardening alloy with the same corrosion resistance as Alloy 400, though with increased tensile strenght and hardness. Alloy K-500
retains its strength up to temperature of about 650o Celsius.

INCONEL 600 (ALLOY 600)

Alloy 600 has excellent resistance to oxidation at temperatures upto 1175o Celsius and is also resistant to a variaty of corrosive media. It
retains its high strength up to about 6500 Celsius. Even at lowest temperature, alloy 600 is employed in components of power plants. This
grade can be welded without thermal retreatment.

INCONEL 625 (ALLOY 625)

Excellent corrosion resistance with high strength and ductility at temperature upto 700o Celsius applicable upto 1100o Celsius. Alloy 625 is
weldable without thermal retreatment.

INCOLLOY 800 (H) (ALLOY 800 (H)

This Alloy is resistant to corrosion resulting form hydrogen sulphide as well as to stress corrosion cracking. It is highly heat resistant and
insensitive to the separation of sigma phase. Alloy 800 H with controlled carbon content improves furthermore the creep strength
depending on time solution annealed condition.

INCOLLOY 825 (ALLOY 825 )

Resistance to sulphuric acid, phosphoric acid solvents and sea water as well as to many oxidising chemicals. Alloy 825 has good resistance
to reducing acid. It can be employed without thermal treatment after the welding process.

HASTALLOY C -276 (ALLOY C -276)

Today probably one of the best and manifold alloys on the market, when employed in extremely corrosive reducing and oxidising
applications. Alloy C-276 has excellent resistance to strong oxidising media contaminated chloride, dry chloride acid formate acid. acetic
hydride solutions, sea water solutions and saline solutions. The alloy is resistance to the corrosive infuence of the hydrochloride acid,
hydrochloride chlorine diexide solutions.

HASTALLOY C -4 (ALLOY C -4)

Excellent resistance against strong oxidising agents, hot contaminated miniral acid, solvent, chlorine and media contaminated by chlorine
(organic and inorganic), dry chloric acid, formic acid, acetic hydride solutions, sea water solution and saline solution. This alloy has high
ductility and corrosive resistance even in temperature range of 650-10400 celsius. Alloy C-4 is resistant against the formation of grain
boundary carbides and can thus used in most cases without heat - treatment after welding.

INCOLLOY DS (ALLOY DS)

Alloy Ds is a heat resistant Ni-Cr-Fe alloy with Si addition for the employment at temperatures where sufficient strength and corrosive
resistance are required. Alloy Ds is heat-resistant upto 11000 Celsius when in air. This alloy is especially resistant against changing oxidising
/ reducing conditions as well as the formation of sigma phase in the critical temperature range of 590-8700 Celsius. Furthermore it is green
rot. Due to high strength and heat resistance to alloy DS, smaller sections than usual can be manufactured from this material.

ALLOY 20
Alloy 20 is a high-alloyed stainless steel. Its corrosion properties surpass those of usual stainless qualities. For example. alloy 20 has
excellent stress corrosion to boiling 20-40% sulphuric acid. Although alloy 20 was originally developed for usage in sulphuric environment,
its range of application has been steadily extended and today also includes machining of artificial rubber, plastic, synthetic fiber etc. In
pharmaceutical and food producing application, where purity has to be guaranteed, Alloy 20 is employed to prevent metalic contamination.
The most important advantages of this grade are its excellent mechanical properties as well as its comparatively easy machine ability.

www.dineshtube.com
5 8
EXOTIC GRADES / NICKEL ALLOYS PIPES / PLATES / ROUNDS / FORGINGS & FITTINGS

Age Hardening Martens itic S teels

NITRONIC-4

www.dineshtube.com
9
PIPES & TUBES

www.dineshtube.com
10
 STAINLESS,CARBON & ALLOY STEEL SEAMLESS PIPE, SCHEDULE DIMENSION

FIGURES BASED ON AUSTENITIC STEEL SHIPPING

Nominal Nominal
pipe O, D pipe Vol/m
size mm 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS size 5S 10S 40S 80S m3
1/8 10,30 1,73 1,73 2,41 2,41 1/8 1,24 1,73 2.41 0,0001
0,37 0,37 0,47 0,47 0,28 0,36 0.48

1/4 13,70 2,24 2,24 3,02 3,02 1/4 1,65 2,24 3.02 0,0002
0,63 0,63 0,80 0,80 0,51 0,64 0.82

3/8 17,10 2,31 2,31 3,20 3,20 3/8 1,65 2,31 3.20 0,0003
0,84 0,84 1,10 1,10 0,64 0,86 1.12

1/2 21,30 2,77 2,77 3,73 3,73 4,78 7,47 1/2 1,65 2,11 2,77 3.73 0,0004
1,27 1,27 1,62 1,62 1,95 2,55 0,82 1,01 1,30 1.65

3/4 26,70 2,87 2,87 3,91 3,91 5,56 7,82 3/4 1,65 2,11 2,87 3.91 0,0007
1,69 1,69 2,20 2,20 2,90 3,64 1,04 1,31 1,71 2.24

1 33,40 3,38 3,38 4,55 4,55 6,35 9,09 1 1,65 2,77 3,38 4.55 0,0011
2,50 2,50 3,24 3,24 4,24 5,45 1,33 2,13 2,55 3.29

1 1/4 42,20 3,56 3,56 4,85 4,85 6,35 9,70 1 1/4 1,65 2,77 3,56 4.85 0,0018
3,39 3,39 4,47 4,47 5,61 7,77 1,68 2,76 3,46 4.56

1 1/2 48,30 3,68 3,68 5,08 5,08 7,14 10,15 1 1/2 1,65 2,77 3,68 5.08 0,0023
4,05 4,05 5,41 5,41 7,25 9,56 1,95 3,17 4,13 5.51

2 60,30 3,91 3,91 5,54 5,54 8,74 11,07 2 1,65 2,77 3,91 5.54 0,0036
5,44 5,44 7,48 7,48 11,11 13,44 2,24 4,01 5,54 7.63

2 1/2 73,00 5,16 5,16 7,01 7,01 9,53 14,02 2 1/2 2,11 3,05 5,16 7.01 0,0053
8,63 8,63 11,41 11,41 14,92 20,39 3,77 5,36 8,81 11.64

3 88,90 5,49 5,49 7,62 7,62 11,13 15,24 3 2,11 3,05 5,49 7.62 0,0079
11,29 11,29 15,27 15,27 21,35 27,68 4,60 6,59 11,52 15.59

3 1/2 5,74 5,74 8,08 8,08 - - 3 1/2 2,11 3,05 5,74 8.08
101,60
13,57 13,57 18,63 18,63 - - 7,55 13,84 19.01 0,0103
5,29
6,02 6,02 8,56 8,56 13,49 17,12 2,11 3,05 6,02 8.56
4 114,30
16,07 16,07 22,32 22,32
11,13
33,54 41,03
4 5,96 8,52 16,40 22.77 0,0130
28,32
6,55 6,55 9,53 9,53 15,88 19,05 2,77 3,40 6,55 9.53
5 141,30
21,77 21,77 30,97 30,97
12,70
49,11 57,43
5 9,67 11,82 22,20 31.59 0,0199
40,28
7,11 7,11 10,97 10,97 18,26 21,95 2,77 3,40 7,11 10.97
6 168,30
28,26 28,26 42,56 42,56
14,27
67,56 79,22
6 11,55 14,13 28,83 43.42 0,028
54,20
6,35 7,04 8,18 8,18 10.30 12,70 12,70 15,09 18,26 20,62 23,01 22,23 2,77 3,76 8,18 12.70
8 219,10
33,31 36,81 42,55 42,55 53.10 64,64 64,64 75,92 100,92 111,27 107,92
8 15,09 20,37 43,39 65.95 0,048
90,44
6,35 7,80 9,27 9,27 12.70 12,70 15,09 18,26 21,44 25,40 28,58 25,40 3,40 4,19 9,27 12.70
10 273,10
41,77 51,03 60,31 60,31 81.50 81,55 96,01 114,75 155,15 172,33 155,15
10 23,08 28,34 61,52 83.19 0,074
133,06
6,35 8,38 9,53 10,31 14.30 12,70 17,48 21,44 25,40 28,58 33,32 25,40 3,96 4,57 9,53 12.70
12 323,90
49,73 65,20 73,88 79,73 109.00 97,46 132,08 159,91 208,14 238,76 186,97
12 31,89 36,73 75,32 99.43 0,104
186,97
6,35 7,92 9,53 9,53 11,13 15.10 12,70 19,05 23,83 27,79 31,75 35,71 3,96 4,78
14 355,60
54,69 67,90 81,33 81,33 94,55 126.40 107,39 158,10 194,96 253,56 281,70 14 35,06 42,14
0,126
224,65
6,35 7,92 9,53 9,53 12,70 16.70 12,70 21,44 26,19 30,96 363,53 40,49 4,19 4,78
16 406,40
62,64 77,83 93,27 93,27 123,30 160.00 123,30 203,53 245,56 333,19 365,35 16 42,41 48,26
0,165
286,64
6,35 7,92 11,13 9,53 14,27 19.00 12,70 23,83 29,36 34,93 39,67 45,24 4,19 4,78
18 457,00
70,57 87,71 122,38 105,16 155,80 206.00 139,15 254,55 309,62 363,56 408,26 459,37 18 47,77 54,36
0,208
6,35 9,53 12,70 9,53 15,09 20.60 12,70 26,19 32,54 38,10 44,45 50,01 4,78 5,54
20 508,00
78,55 117,15 155,12 117,15 183,42 248.5 155,12 311,17 381,53 441,49 508,11 564,81 20 60,46 70,00
0,258
6,35 9,53 12,70 9,53 - 22.20 12,70 28,58 34,93 41,28 47,63 53,98 4,78 5,54
22 559,00
86,54 129,13 171,09 129,13 - 294.00 171,09 373,83 451,42 527,02 600,63 672,26 22 66,57 77,06
0,312
6,35 9,53 14,27 9,53 17,48 24.60 12,70 30,96 38,89 46,02 52,37 59,54 5,54 6,35
24 610,00
94,53 141,12 209,64 141,12 255,41 355.00 187,06 442,08 547,71 640,03 720,15 808,22 24 84,16 96,37
0,372
7,92 12,70 - 9,53 - 12,70
26 660,00
127,36 202,72 - 152,87 - 202,72
26 0,435
7,92 12,70 15,88 9,53 - 12,70
28 711,00
137,32 218,69 271,21 164,85 - 218,69
28 0,505
7,92 12,70 15,88 9,53 - 12,70 6,35 7,92
30 762,00
147,28 234,67 292,18 176,84 - 234,67
30 120,72 150,36 0,580
7,92 12,70 15,88 9,53 17,48 12,70
32 813,00
157,24 250,64 312,15 188,82 342,91 250,64
32 0,660
7,92 12,70 15,88 9,53 17,48 12,70
34 864,00
167,20 266,61 332,12 200,31 364,90 266,61
34 0,746
7,92 12,70 15,88 9,53 19,05 12,70
36 914,00
176,96 282,27 351,70 212,56 420,42 282,27
36 0,835

38 9,53 12,70 38
965,00
224,54 298,24 0,931

40 9,53 12,70 40
1016,00
236,53 314,22 1,032

42 9,53 12,70 42
1067,00
248,52 330,19 1,138

44 9,53 12,70 44
1118,00
260,50 346,16 1,249

46 9,53 12,70 46
1168,00
272,25 351,82 1,364

48 9,53 12,70 48
1219,00
284,24 377,79 1,485

Notes : 1) NPS (Normal Piper Size) is a dimensionless designator that has been substituted in the customary units section for the previous term inch Nominal Size.
2) Black- Thickness of Pipe RED - Pipe weight in kg per meter.
3) STD = Standard, XS = Extra Strong, XXS = Double Extra Strong.

www.dineshtube.com
11
 CHEMICAL COMPOSITION OF S. S. PIPES & TUBES

Composition %
UNS Manga- Phos- Colum- Tanta-
Carbon Molyb- Tita- blum Vana-
Grade Design- nese Sulphur phorus Silicon Nickel Chromium lum NitrogenC Copper Cerlum Bom
max denum nium dium
ation max max max plus max
Tantalum
TP304 S30400 0.08 2.00 0.040 0.030 0.75 max 8.00-11.0 18.0-20.0 -- -- -- -- -- -- -- -- --
TP304H S30409 0.04-0.10 2.00 0.040 0.030 0.75 max 8.00-11.0 18.0-20.0 --- --- --- --- --- --- --- ---
TP304L S30403 0.035 2.00 0.040 0.030 0.75 max 8.00-13.0 18.0-20.0 --- --- --- --- --- --- --- ---
TP304N S30451 0.08 2.00 0.040 0.030 0.75 max 8.00-11.0 18.0-20.0 --- --- --- --- 0.10-0.16 --- --- ---
TP304LN S30453 0.035 2.00 0.040 0.030 0.75 max 8.00-11.0 18.0-20.0 --- --- --- --- 0.10-0.18 --- --- ---
TP309Cb S30940 0.08 2.00 0.045 0.030 0.75 max 12.0-16.0 22.0-24.0 0.75 max --- 10 x C --- --- --- --- ---
min
1.10
max
TP309H S30909 0.04-0.10 2.00 0.040 0.030 0.75 max 12.0-15.0 22.0-24.0 --- --- --- --- --- --- --- ---
TP309HCb S3041 0.04-0.10 2.00 0.045 0.030 0.75 max 12.0-16.0 22.0-24.0 0.75 max --- 10 x C --- --- --- --- ---
min
1.10
max
TP309S S30908 0.08 2.00 0.045 0.030 0.75 max 12.0-15.0 22.0-24.0 0.75 max --- --- --- --- --- --- ---
TP310Cb S31040 0.08 2.00 0.045 0.030 0.75 max 19.0-22.0 24.0-26.0 0.75 max --- 10 x C --- --- --- --- ---
min
1.10
max
TP310H S31009 0.04-0.10 2.00 0.040 0.030 0.75 max 19.0-22.0 24.0-26.0 --- --- --- --- --- --- --- ---
TP310HCb S31041 0.04-0.10 2.00 0.045 0.030 0.75 max 19.0-22.0 24.0-26.0 0.75 max --- 10 x C --- --- ---
min
1.10
max
TP310S S31008 0.08 2.00 0.045 0.030 0.75 max 19.0-22.0 24.0-26.0 0.75 max --- --- --- --- --- ---
S31272 0.08-0.12 1.5 0.030 0.015 0.3-0.7 14.0-16.0 14.0-16.0 1.0-1.4 0.3- 0.04
2.00 0.6 0.00
TP316 S31600 0.08 2.00 0.040 0.030 0.75 max 11.0-14.0 16.0-18.0 2.00-3.00 --- --- --- --- --- --- ---
TP316H S31609 0.04-0.10 2.00 0.040 0.030 0.75 max 11.0-14.0 16.0-18.0 2.00-3.00 --- --- --- --- --- --- ---
TP316L S31603 0.035 2.00 0.040 0.030 0.75 max 10.0-15.0 16.0-18.0 2.00-3.00 --- --- --- --- --- --- ---
TP316N S31651 0.08 2.00 0.040 0.030 0.75 max 11.0-14.0 16.0-18.0 2.00-3.00 0.10-0.16 -- --- ---
TP316LN S31653 0.035 2.00 0.040 0.030 0.75 max 11.0-14.0 16.0-18.0 2.00-3.00 --- --- --- 0.10-0.18 --- ---- ---
TP317 S31700 0.08 2.00 0.040 0.030 0.75 max 11.0-14.0 18.0-20.0 3.00-4.00 --- --- --- --- --- --- ---
TP317L S31703 0.035 2.00 0.040 0.030 0.75 max 11.0-15.0 18.0-20.0 3.00-4.00 --- --- --- --- --- --- ---
TP321 S32100 0.08 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 --- F
--- --- --- --- --- ---
TP321H S32109 0.04-0.10 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 --- G
--- --- --- --- --- ---
TP347 S34700 0.08 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 -- --- H
--- --- --- --- ---
TP347H S34709 0.04-0.10 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 -- --- I
--- --- --- --- --- ---
TP347LN S34751 0.005- 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 --- --- 0.2-0.5 H --- 0.06-0.10 --- --- ---
0.020
TP348 S34800 0.08 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 --- --- H
0.10 --- -- --- ---
TP348H S34809 0.04-0.10 2.00 0.040 0.030 0.75 max 9.00-13.0 17.0-20.0 --- --- I
0.10 --- -- --- ---
TPXM 10 S21900 0.08- 8.00- 0.040 0.030 1.00 max 5.50-7.50 19.0-21.5 --- --- --- --- 0.15-0.40 --- --- ---
1000 10.00
TPXM 11 S21904 0.04- 8.00- 0.040 0.030 1.00 max 5.50-7.50 19.0-21.5 --- --- --- --- 0.15-0.40 --- --- ---
10.00 10.00
TPXM-15 S38100 0.08 2.00 0.030 0.030 1.50-2.50 17.5-18-5 17.0-19.0 --- --- --- --- --- --- --- ---
TPXM-19 S20910 0.060 4.00- 0.040 0.030 1.00 max 11.5-13.5 20.5-3.00 1.50-3.00 --- 0.10- --- 0.20-0.40 0.10- --- ---
6.00 0.30 0.30
TPXM-29 S24000 0.080 11.5- 0.060 0.030 1.00 max 2.25-3.75 17.0-19.0 --- --- -- --- 0.20-0.40 --- --- ---
14.5
--- S31254 0.020 1.00 0.030 0.010 0.80 max 17.5-18.5 19.5-20.5 6.00-6.50 --- --- --- 0.18-0.22 --- 0.50-1.00
--- S30615 0.16-0.24 2.00 0.030 0.030 3.2-4.0 13.5-16.0 17.0-19.5 --- --- --- --- --- --- --- ---
--- S30815 0.05-0.10 0.80 0.040 0.030 1.40-2.00 10.0-12.0 20.0-22.0 --- --- --- --- 0.14-0.20 --- --- 0.03-
0.08
--- S31050 0.025 2.00 0.020 0.015 0.4 20.5-23.5 24.0-26.0 1.6-2.6 --- --- --- 0.09-0.15 --- --- ---
--- S30600 0.018 2.00 0.020 0.020 3.7-4.3 14.0-15.5 17.0-18.5 0.20 max --- --- --- --- --- 0.50 max ---
--- S31725 0.03 2.00 0.040 J 0.030 0.75 13.5-17.5 18.0-20.0 4.0-5.0 --- --- --- 0.10 max --- 0.75 max ---
--- S31726 0.03 2.00 0.040 J 0.030 0.75 13.5-17.5 17.0-20.0 4.0-5.0 --- --- --- 0.10-0.20 --- 0.75 max ---
--- S32615 0.07 2.00 0.045 0.030 4.8-6.0 19.0-22.0 16.5-19.5 0.3-1.5 --- --- --- --- --- 1.5-2.5 ---
--- S33228 0.04-0.08 1.00 0.020 0.015 0.30 max 31.0-33.0 26.0-28.0 --- --- 0.6-1.0 --- --- --- --- 0.05- ---
0.10
--- S24565 0.03 5.0-7.0 0.030 0.010 1.00max 16.0-18.0 23.0-25.0 4.0-5.0 --- 0.1 max 0.04-0.6 --- --- --- ---
--- S30415 0.4-0.06 0.80 0.045 0.030 1.00-2.00 9.00-10.0 18.0-19.0 --- --- --- --- 0.12-0.16 --- --- 0.03-
0.08
--- S32654 0.020 2.00- 0.030 0.005 0.50 max 21.0-23.0 24.0-25.0 7.00-8.00 --- --- --- 0.45-0.55 --- 0.030-0.60 ---
4.00

--- S35315 0.04-0.08 2.00 0.045 0.030 0.75 34.0-36.0 24.0-26.0 --- --- --- --- 0.12-0.18 --- --- 0.03-
0.08
--- N08367 0.030 2.00 0.030 0.030 1.00 max 23.50-25.50 20.00-22.00 6.00-7.00 --- --- --- 0.18-0.25 --- 0.75 max --- ---
--- N08904 0.020 2.00 0.045 0.035 1.00 23.0-28.0 19.0-23.0 4.0-5.0 --- --- --- 0.10 max --- 1.0-2.0 --- ---
New designation established in accordance with Practice E 527 and SAE J 1086.
Maximum, unless otherwise indicated.The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer.
For welded TP316, TP316N, TP316LN, and TP316H pipe, the nickel range shall be 10.0-14.0 %. For small diameter or thin walls or both, where many drawing passes are required, a carbon
maximum of 0.040 % is necessary in grades TP304L and TP316L. Small diameter tubes are defined as those less 0.500 in (12.7mm) in outside diameter and light wall tubes as those less than
0.049 in (1.20 mm) in average wall thickness (1.10 mm) in minimum wall thickness
The titanium content shall be not less than five times the carbon content and not more than 0.70 %. The titanium content shall be not be less than four times the carbon content and not more
than 0.60 %. The Columblum plus titanium content shall be not less than ten times carbon content and not more than 1.00 %.
The Columblum plus titanium content shall be not less than eight times carbon content and not more than 1.00 %.
For welded pipe, the phosphorus maximum shall be 0.045 %. Grade S34751 shall have a columblum (Nioblum) plus tantalum content of not less than 15 times the carbon content.

www.dineshtube.com
12
 MECHANICAL PROPERTIES OF S. S. PIPES

Table-2 Annealing Requirements A312/A312M Table-3 Tensile Requirements

Grade or UNS Designation Solution Treating Cooling Grade UNS Tensile Yield
Temperature Requirements Designation Strength, min Strength, Min
Ksi (MPa) Ksi (MPa)

All Grades not individually listed 19000F(10400C) rapidc TP304L S30403 70 (485) 25 (170)
below TP316L S31603 70 (485) 25 (170)
TP321H, TP347H, TP348H TP304 S30400 75 (515) 30 (205)
Cold Rolled 20000F (11000C) TP304H S30409 75 (515) 30 (205)
Hot Rolled only 19250F (10500C) TP309Cb S30940 75 (515) 30 (205)
TP304H, TP316H TP309H S30909 75 (515) 30 (205)
Cold Rolled 19000F (10400C) TP309HCb S30941 75 (515) 30 (205)
Hot rolled only 19000F (10400C) TP309S S30908 75 (515) 30 (205)
TP309H, TP309HCb, TP310H 1900 0F (10400C) TP310Cb S31040 75 (515) 30 (205)
TP310HCb TP310H S31009 75 (515) 30 (205)
S30815 19200F (10500C) rapid TP310HCb S31041 75 (515) 30 (205)
S31272 19200F (10500C) rapid TP310S S31008 75 (515) 30 (205)
S31254 21000F (11500C) rapid S31272 65 (450) 29 (200)
S24565 2050-21400F (1120-11700C) rapid TP316 S31600 75 (515) 30 (2050
S35315 20100F (11000C) rapid TP316H S31609 75 (515) 30 (205)
N08367 20100F (11000C) rapid TP317 S31700 75 (515) 30 (205)
N08904 20100F (11000C) rapid TP317L S31703 75 (515) 30 (205)
TP321 S32100
Welded 75 (515) 30 (205)
Seamless
< 3/8 in. 75 (515) 30 (205)
> 3/8 in. 70 (485) 25 (170)
TP321H S32109
Welded 75 (515) 30 (205)
Seamless
< 3/8 in. 75 (515) 30 (205)
> 3/8 in. 70 (485) 25 (170)
TP347 s34700 75 (515) 30 (205)
TP347H S3470 75 (515) 30 (205)
TP347LN S34751 75 (515) 30 (205)
TP348 S34800 75 (515) 30 (205)
TP348H S34809 75 (515) 30 (205)
TPXM-10 S21900 90 (620) 50 (345)
TPXM-11 S21904 90 (620) 50 (345)
TPXM-15 S38100 75 (515) 30 (205)
TPXM-29 S24000 100 (690) 55 (380)
TPXM-19 S20910 100 (690) 55 (380)
TP304N S30451 80 (550) 35(240)
TP316N S31651 80 (550) 35 (240)
TP304LN S31653 75 (515) 30 (205)
--- S31254 94 (650) 44 (300)
--- S30615 90 (620) 40 (275)
--- S30815 87 (600) 45 (310)
--- S30600 78 (540) 35 (240)
--- S31725 75 (515) 30 (205)
--- S31726 80 (550) 35 (240)
--- S31050
T<0.25 IN. 84 (580) 39 (270)
T>0.25 in. 78 (540) 37 (255)
--- S32615 80 (550) 32 (220)
--- S33228 73 (500) 27 (185)
--- S24565 115 (795) 60 (415)
--- S30415 87 (600) 42 (290)
--- S32654 109 (750) 62 (430)
--- S35315 94 (650) 39 (270)
--- N08367:
t<0.187 100 (690) 45 (310)
t>0.187 95 (655 45 (310)
--- N08904 71(490) 31(215)
Elongation in 2 in or 50 mm (or 4D), min,% Longitudinal Transverse
All Grades except S 31050 and S 32615 35 25 S32615, S31050 25 --NO8367
Prior to the issuance of A 312/A 312 M- 88a, the tensile and yield strength values were
76 (515) and 30 (205) respectively, for nominal wall greater than 3/8 in. (9.5 mm).

www.dineshtube.com
13
 TOLERANCE: ASTM SPECIFICATION FOR TUBING & PIPING

Specification Allowable Outside Diameter Allowable Wall Exact Length Testing

Variation in mm Thickness Variation Tolerance in mm
Nominal Diameter Over Under %Over %Under Over Under
ASTM-A213 Under 25.4 .1016 .1016 +20 -0 3.175 0 Tension Test
Seamless Boiler 25.4-38.1 incl .1524 .1524 +22 -0 3.175 0 Flattening Test
Superheater and 38.1-50.8 excl .2032 .2032 +22 -0 3.176 0 Flare Test
Heat Exchanger 50.8-63.5 excl .254 .254 +2 -0 4.46 0 Hardness Test
Tubes 63.5-76.2 excl .3048 .3048 +22 -0 4.76 0 100% Hydrostatic test
76.2-101.6 incl .381 .381 +22 -0 4.76 0 Refer to ASTM A-450

Under 25.4 .1016 .1016 +10 -10 3.175 0 Tension Test

ASTM-A249 25.4-38.1 incl .1524 .1524 +10 -10 3.175 0 Flattening Test
Welded Boiler 38.1-50.8 Excl .2032 .2032 +10 -10 3.175 0 Flare Test
Superheater, Heat 50.0-63.5 excl .254 .254 +10 -10 4.76 0 Reverse Bend Test
Exchanger And 63.5-76.2 excl .3848 .3048 +10 -10 4.76 0 Hardness Test
Condenser Tubes 76.2-101.6 incl .381 .381 +10 -10 4.76 0 100% Hydrostastic Test
Minimum Wall tubes *Reverse flattening Test
+ 18% 0 available Refer to ASTM A-450
On request *Wherever applicable

Untp 12.7 .13 .13 +15 -15 3.2 0 Flare Test

ASTM-A269 12.7-38.1 excl .13 .13 +10 -10 3.2 0 Flance Test (Welded Only)
Seamless & Welded 38.1-88.9 excl .25 .25 +10 -10 4.8 0 Hardness Test
Tubing for General 88.9-139.7 excl .38 .38 +10 -10 4.8 0 Reverse Flattening Test
Service 139.7-203.2 excl .76 .76 +10 -10 4.8 0 (Welded only)
100% Hydrostatic Test
Refer to ASTM-A269

25.4 .05 .20 +12.5 -12.5 3.2 0 Reverse flattening Test

38.1 .05 .20 +12.5 -12.5 3.2 0 100% Hydrostastic Test
ASTM-A270 50.8 .05 .28 +12.5 -12.5 3.2 0 External polish on all tubes
Seamless & Welded 60.5 .05 .28 +12.5 -12.5 3.2 0
Sanitary Tubing 76.2 .08 .30 +12.5 -12.5 3.2 0 Refer to ASTM A-270
101.6 .08 .38 +12.5 -12.5 3.2 0
.79 .79 12.5% under 6.4 0
3.175-38.1 incl .4 .79 Minimum Wall 6.4 0 Tension Test
38.1-1016 incl 1.59 .79 nominal wall 6.4 0 Flattening Test
ASTM-A312 101.6-203.2 imcl Specified 100% Hydrostatic Test
(Normally Random
Seamless & Welded
Lengths ordered
pipe Refer to ASTM A-530
+0.5% -0.3 6.0
ASTM A-358 219.08-750mm Refer to ASTM A-530
Welded pipe or 0.01 inch

www.dineshtube.com
14
 CARBON STEEL , ALLOY STEEL LOW TEM, PIPE AND TUBE SPECIFICATION

MECHANICAL PROPERTIES SPECIFIC REQUIREMENT

CHEMICAL
TENSILE YIELD ELONGATI
STRENGTH STRESS ON

SPECIFICATION WT C% Mn % P% S% Si% Cr% Mo% Mpa Mpa 50mm MIN

MAX MAX Longitudinal

ASTM A53/A AW 0.25MAX 0.95MAX 0.050 0.045 - - - 330MIN 205MIN 36

ASTM A53/B AW 0.30MAX 1.20MAX 0.050 0.045 - - - 415MIN 240MIIN 29/5 Cr Mo Cu Ni Va
ASTM /A 106/A AW 0.25MAX 0.27-0.93 0.035 0.025 0.10MIN 0.40MAX 0.15MAX 330MIN 205MIN 35/2 40 15 40 40 08
ASTM A 106/B AW 0.35MAX 0.29-1.06 0.035 0.035 0.10MIN 0.40MAX 0.15MAX 415 MIN 240MIN 30/22 Five elements not to exceed 1%
ASTM A 106/C AW 0.35MAX 0.29-1.06 0.035 0.035 0.10MIN 0.40MAX 0.15MAX 485MIN 275MIN 30/22

ASTM A179 MW 0.06~018 0.27-0.63 0.035 0.035 - - - 325MIN 180MIN 35.0 Hardness 72 HRB Max
ASTMA214 MW 0.18MAX 0.27-0.63 0.035 0.035 - - - 385MIN 180MIN 35.0 Hardness 72 HRB Max
ASTM A192 MW 0.06-0.18 0.27-0.63 0.035 0.035 0.25MAX - - 325MIN 180MIN 35.0 Hardness 77 HRB Max
ASTM a209/T1 MW 0.10-0.20 0.30-0.80 0.025 0.025 0.10-0.50 - 0.44-0.65 380MIN 205MIN 30/22 Hardness 80 HRB Max
ASTM A209/T1a MW 0.15-0.25 0.30-0.80 0.025 0.025 0.10-0.50 - 0.44-0.65 365MIN 195MIN 30/22 Hardness 81 HRB Max
ASTM A209/T1b MW 0.14MAX 0.30-0.80 0.025 0.025 0.10MIN - 0.44-0.65 415MIN 220MIN 30/22 Hardness 77 HRB Max
ASTM A210/A-1 MW 0.27max 0.93max 0.035 0.035 0.10min - - 415MIN 255MIN 30/22 Hardness 79 HRB Max
ASTMA210/C MW 0.35MAX 0.23-1.06 0.035 0.035 0.10MIN - - 485MIN 275MIN 30/22 Hardness 89 HRB Max

ASTM A213/T2 MW 0.10/0.20 0.30-0.61 0.025 0.025 0.10-0.30 0.50-0.81 0.44-0.65 415MIN 205MIN 30/22 Hardness 85 HRB Max
ASTM A213/T5 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 4.00-6.00 0.44-0.65 415MIN 205MIN 30/22 Hardness 85 HRB Max
ASTM A213/T11 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 1.00-1.50 0.44-0.65 415MIN 205MIN 30/22 Hardness 85 HRB Max
ASTM A213/T12 0.05 0.15MAX 0.30-0.61 0.025 0.025 0.50MAX 0.80-1.25 0.44-0.65 415MIN 220MIN 30/22 Hardness 85 HRB Max
ASTM A213/T22 0.05 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 1.90-2.60 0.87-1.13 415MIN 205MIN 30/22 Hardness 85 HRB Max

ASTM A333/3 AW 0.19MAX 0.31-0.64 0.025 0.025 0.18-0.37 Ni 3.18-3.82 380MIN 205MIN 35/25
ASTM A333/6 AW 0.30MAX 0.29-1.06 0.025 0.025 0.10MIN -- - 415MIN 240MIN 30/22 IMPACT AS -50f
ASTM A334/3 AW 0.19MAX 0.31-0.64 0.025 0.025 0.18-0.37 Ni 3.18-3.82 380MIN 205MIN 35/28 FOR 40X10/18/1490 HRB MAX
ASTM A334/6 MW 0.30MAX 0.9-1.06 0.025 0.025 0.10MIN - - 415MIN 240MIN 30/22 50 f 40X10/18/14

ASTM A335/P1 AW 0.10-0.20 0.30-0.80 0.025 0.025 0.10-0.50- - 0.40-0.65 380MIN 205MIN 30/22
ASTM A335/P2 AW 0.10-0.20 0.30-0.61 0.025 0.025 0.10-0.30 0.50-0.81 0.40-0.65 380MIN 205MIN 30/22
ASTM A335/P5 AW 0.15MAX 0.30-0.60 0.025 0.025 0.50-1.00 4.00-6.00 0.40-0.65 415MIN 205MIN 30/22
ASTM A335/P11 0.05 0.15MAX 0.30-0.60 0.025 0.025 0.50-1.00 1.00-1.50 0.400-65 415MIN 205MIN 30/22
ASTM A335/P12 0.05 0.15MAX 0.30-0.61 0.025 0.025 0.50MAX 0.80-1.25 0.40-0.65 415MIN 205MIN 50/22
ASTM A335/P22 0.05 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 1.90-2.60 0.87.1.13 415MIN 205MIN 30/22

BS/3059/1/33 0.15Max 0.30-0.70 0.050 0.050 - - - 324-441 186MIN 25

BS/3059/2/33 0.15MAX 0.400.70 0.050 0.050 0.10-0.35 - - 324-441 186MIN 21
BS/3059/245 0.120.18 0.90-1.20 0.035 0.035 0.10-0.35 - - 441-560 245MIN 22

BS/3059/2/620 0.10-0.15 0.40-0.70 0.040 0.040 0.10-0.35 0.70-1.10 0.45-0.65 441-618 235MIN 22
DIN/17175/ST35.8 0.17MAX 0.40MIN 0.040 0.040 0.35MAX - - 340-441 235MIN 25
DIN/17175/ST45.8 0.22MAX 0.45MIN 0.040 0.040 0.10-0.35 - - 441-540 255 MIN 25
DIN/17175/15MO3 0.12-0.20 0.50-0.80 0.040 0.040 0.10-0.35 - 0.250-0.35 441-540 284MIN 21
DIN/17175/13CrMo44 0.10-0.18 0.40-0.60 0.040 0.040 0.15-0.35 0.70-1.60 0.40-0.50 441-570 294MIN 22
DIN/17175/10CrM910 0.15MAX 0.40-0.60 0.040 0.040 0.15-0.50 2.0-2.5 0.9-1.10 441-570 249MIN 22

ASTM A199/T5 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 4.00-6.00 0.45-0.65 415MIN 170MIN 30/22
ASTM A199/T11 MW 0.05-0.15 0.30-0.60 0.025 0.025 0.50-1.00 1.00-1.50 0.44-0.65 415MIN 170MIN 30/22
ASTM A199/T22 MW 0.05-0.15 0.30-0.60 0.025 0.025 0.50MAX 1.90-2.60 0.87-1.13 415MIN 170MIN 30/22
ASTM A199/T4 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50-1.00 2.15-2.85 0.44-0.65 415MIN 170MIN 30/22
ASTM A199/T7 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50-1.00 6.00-8.00 0.45-0.65 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T5 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50MAX 4.00-6.00 0.45-0.65 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T11 MW 0.05-0.15 0.30-0.60 0.025 0.025 0.50-1.00 1.00-1.50 0.44-0.65 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTMA199/T22 MW 0.05-0.15 0.30-0.60 0.025 0.025 0.50MAX 1.90-2.60 0.87-1.13 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T4 MW 0.05-0.15 0.30-0.60 0.025 0.025 0.50-1.00 2.15-2.852 0.44-0.85 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T7 MW 0.15MAX 0.30-0.60 0.025 0.025 0.50-1.00 6.00-8.00 0.45-0.65 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T9 MW 0.15MAX 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T9 MW 0.15MAX 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A199/T9 MW 0.15MAX 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 415MIN 170MIN 30/22 HARDNESS 85 HRB MAX
ASTM A335/P9 MW 0.15MAX 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.09-1.10 415MIN 172MIN 30/22 HARDNESS 85 HRB MAX
ASTM A178A MW 0.06-0.18 0.30-0.60 0.035 0.035 - - - 325MIN 180MIN 35 HARDNESS 89 HRB MAX
ASTM A178C MW 0.35 MAX 0.27-0.63 0.035 0.035 - - - 415MIN 170MIN 30 HARDNESS 89 HRB MAX
ASTM A178B MW 0.27MAX 0.80 MAX 0.030 0.015 0.10MIN - - 485MIN 275MIN 30 HARDNESS 89 HRB MAX

www.dineshtube.com
15
 DIME NS IONS AND NOMINAL WE IG HTS OF B L AC K
S TE E L TUB E S IN AC C OR DANC E WITH IS : 1239 (PAR T 1) - 1979

Outside diameter Thickness Weight Dimension

of black tube of sockets

Medium &
Light Medium Heavy Outside
Nominal Light Heavy Light Medium Heavy Plain Screwed Plain Screwed Plain Screwed Diameter Length
Bore Max Min Max Min End Socketed End Socketed End Socketed Min Min
mm mm mm mm mm mm swg mm swg mm swg kg/m kg/m kg/m kg/m kg/m kg/m mm mm

6 10.1 9.7 10.6 9.8 1.8 15 2.0 14 2.65 12 0.361 0.364 0.407 0.410 0.496 0.496 15 19

8 13.6 13.2 14.0 13.2 1.8 15 2.35 13 2.9 11 0.517 0.521 0.650 0.654 0.769 0.773 18.5 27

10 17.1 16.7 17.5 16.7 1.8 15 2.35 13 2.9 11 0.674 0.680 0.852 0.858 1.02 1.03 22 28

15 21.4 21.0 21.8 21.0 2.0 14 2.65 12 3.25 10 0.952 0.951 1.22 1.23 1.45 1.46 27 37

20 26.9 26.4 27.3 26.5 2.35 13 2.65 12 3.25 10 1.41 1.42 1.58 1.59 1.90 1.91 32.5 39

25 33.8 33.2 34.2 33.3 2.65 12 3.25 10 4.05 8 2.01 2.03 2.44 2.46 2.97 2.99 39.5 46

32 42.5 41.9 42.9 42.0 2.65 12 3.25 10 4.05 8 2.58 2.61 3.14 3.17 3.84 3.87 49 51

40 48.4 47.8 48.8 47.9 2.9 11 3.25 10 4.05 8 3.25 3.29 3.61 3.65 4.43 4.47 56 51

50 60.2 59.6 60.8 59.7 2.9 11 3.65 9 4.5 7 4.11 4.18 5.10 5.17 6.17 6.24 68 60

65 76.0 75.2 76.6 75.3 3.25 10 3.65 9 4.5 7 5.80 5.92 6.51 6.63 7.90 8.02 84 69

80 88.7 87.9 89.5 88.0 3.25 10 4.05 8 4.85 6 6.81 6.98 8.47 8.64 10.1 10.3 98 75

100 113.9 113.0 115.0 113.1 3.65 9 4.5 7 5.4 5 9.89 10.2 12.1 12.4 14.4 14.7 124 87

www.dineshtube.com
125 - - 140.8 138.5 - - 4.85 6 5.4 5 - - 16.2 16.7 17.8 18.3 151 96

150 - - 166.5 163.9 - - 4.85 6 5.4 5 - - 19.2 19.8 21.2 21.8 178 96

B IG DIAME TE R E R W P IP E S C ONF IR MING TO IS 3589 Toleranc e on Thic knes s and Weight

Nominal Bore Nominal Bore Nominal Bore Nominal Bore Nominal Bore Nominal Bore Nominal Bore Nominal Bore
Wall Thickness
7" NB 8" NB 10" NB 12" NB 14" NB 16" NB 18" NB 20" NB The following manufacturing tolerance shall be permitted on
in mm
193.7 mm OD 219.1 mm OD 273 mm OD 323.7 mm OD 355.6 mm OD 406.4 mm OD 457 mm OD 508 mm OD the tubes and sockets.
kg/mtr kg/mtr kg/mtr kg/mtr kg/mtr kg/mtr kg/mtr kg/mtr kg/mtr
(a) Thickness
4.85 22.59 25.62 32.07 38.13 - - - - (1) Butt welded Light tubes
5.2 24.17 27.43 34.34 40.85 - - - - + Not limited
5.6 26 29.28 36.93 43.93 48.11 - - - Medium and Heavy tubes - 8 percent
6 27.88 31.53 39.5 47.02 51.49 61 69 - + Not Limited
(2) Seamless tubes - 10 percent
6.35 29.34 33.28 41.73 49.67 54.43 62.35 70.5 78.5
+ Not Limited
7.01 32.27 36.76 46.43 55.45 61.82 69.04 - - (b) Weight : - 12.5 percent
7.94 - 41 50.95 61.85 67.98 77.92 87.8 - (1) Single tube (light series)
8.18 - 42.56 53.42 65.12 - - - - + 10 percent
9.53 - 51.5 60.24 73.75 81.21 93.13 105 117 (2) Single tube (medium and heavy series) - 8 percent
12.7 - - - - 107.28 123.3 139 155 + 10 percent

16
 CHEMICAL COMPOSITION OF TI ALLOY GR2, GR5, GR7 PIPES/ TUBES

EQUIVALENT GRADES OF TI ALLOY GR2, GR5, GR7 PIPES/ TUBES

TITANIUMI ALLOY GR2, GR5, GR7 PIPES/ TUBES MECHANICAL PROPERTIES

www.dineshtube.com
17
02243471889 sal
es@di
nesht
ube.
com www.
dinesht
ube.
com
+919969452975

3/
76Har
arwal
l
aBui
l
ing,NearAl
ankarTheat
er,Mumbai-400004,Mahar
asht
ra.