Video Add-on Cards

1
DVP-7010A 1 Channel PCI-bus Video Capture Card with WDT, GPIO 1-2
DVP-7010AX 4 Channel PCI-bus Video Card with WDT, GPIO, Auto Wake-up 1-4
DVP-7020A 16 Channel PCI-bus Video Capture Card with WDT, GPIO 1-6
DVP-7410 1 Channel MPEG-1/2/4 Decoder Card 1-8
DVP-7421 4 Channel MPEG 1/2/4 Video/Audio Codec PCI Card with EEPROM 1-10
DVP-1020 4 Channel PC/104-Plus Video Capture Module with WDT, GPIO, Auto Wake-up 1-12
DVP-1411E 1 Channel Network-based MPEG-4 A/V Video Encoder Module 1-14
DVP-1411D 1 Channel Network-based MPEG-4 Video Decoder Module 1-16
DVP-1412 1 Channel MPEG-1/2/4 Digital Video/Audio Encoder Module 1-18
AIMB-741E-DVP Socket 478 Pentium 4/Celeron Industrial ATX Motherboard with WDT/AGP/ LAN/CF 1-20
(400/533 MHz FSB)
DVP-1410H USB 2.0 Hub Module for DVP-1410 Series 1-22
 DVP-7010A 1 Channel PCI-bus Video Capture Card
with WDT, GPIO

Patent Pending Features

 Supports 1 channel composite input and captures up to D1 resolution at
30/25 fps
 CONEXANT Fusion 878A video decoder chip onboard
 NTSC/PAL Composite video input through BNC connectors
 Built-in 128-byte user programmable EEPROM
 Up to 4 cards installed in one PC, setting by on-board DIP switch
 8 bit TTL/CMOS level Digital I/O
 Supports MS Windows® 2000/XP with drivers and SDK
 Watchdog function for system fail over
 Programmable software protection key

Introduction
DVP-7010A is a 1 channel input PCI bus video capture card. DVP-7010A allows up to 4 cards to be installed in one PC system through onboard DIP switch setting. DVP-7010A has
LED indicators to display the card IDs, and supports NTSC/PAL composite video input through BNC connectors. It has a built-in watchdog timer to reset the system and prevent the
system from hanging when unknown errors occur. DVP-7010A is designed with programmable software protection for copy protection issues.

Specifications
Video Ordering Information
 Input Connectors 1 BNC connectors
 DVP-7010A 1 channel PCI capture card
 Video Standard Composite for NTSC / PAL
 DVA-1000 Secure key writer for software copyright protection
 Capture Resolution Up to 720 x 480 (NTSC) / 720 x 576 (PAL)
 Frame Rate 30 fps (NTSC) / 25 fps (PAL/SECAM)
 Image Processing Hardware adjustment of hue, contrast, saturation, and Packing List
brightness  Startup Manual X1
 Data Output Format Multiple YCrCb, RGB and YUV planar formats supported  Utility CD X1
Selectable pixel density: 8, 16, 24, and 32 bits per pixel
Host Communication
 Host Interface PCI v2.2
 Max. Card Up to 4 cards in one PC system, setting by DIP switch
with LED indicators on Bracket.
 Driver and SDK Supports Microsoft Windows 2000/XP
 Demo Program Complete demo program with C++ source code for
reference
Hardware
 GPIO TTL/CMOS level 8-bit DI/O
 EEPROM 128-byte EEPROM for programming
 Dimensions (W x L) 119.91 x 106.69 mm (4.72” x 4.20”)
 Power Consumption +5 V DC input by PCI bus, max. 330 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating) -20 ~ 70° C
(-4 ~ 158° F; Non-operating)

1-2
 1
Video Add-on Cards
Block Diagram
2
Video Recording Systems &
Storage Servers

3
Digital Signage

Dimension Diagram

Unit: mm

Online Download www.advantech.com/products 1-3

 DVP-7010AX 4 Channel PCI-bus Video Capture Card
with WDT, GPIO, Auto Wake-up

Patent Pending Features

 Supports 4 channel composite input and captures up to D1 resolution at
30/25 fps with shared frame technology
 CONEXANT-Fusion 878A video decoder chip onboard
 NTSC/PAL Composite video input through BNC connectors
 Built-in 128-byte user programmable EEPROM
 Up to 4 cards installed in one PC, setting by on-board DIP switch
 8 bit TTL/CMOS level Digital I/O
 Supporting MS Windows® 2000/XP with drivers and SDK
 Watchdog function for system fail over
 Automatic wake-up function with 10 customized set time and 2 external
trigger inputs
 Programmable software protection key

Introduction
DVP-7010AX is a 4 channel input PCI bus video capture card. It supports up to 4 channel inputs with shared frame technology and captures up to D1 resolution at 30/25 fps frame
rate. DVP-7010AX allows up to 4 cards to be installed in one PC system through onboard DIP switch setting. DVP-7010AX has LED indicators to display the card IDs, and supports
NTSC/PAL composite video input through BNC connectors. DVP-7010AX has an auto wake-up function with several pre-defined times to wake the system from a dormant state. This
function can also be triggered by an outside signal via 2 digital trigger pins. It has a built-in watchdog timer to reset the system and prevent the system from hanging when unknown
errors occur. DVP-7010AX is designed with programmable software protection for copy protection issues.

Specifications Ordering Information

Video  DVP-7010AX 4 channel PCI capture card with auto wake-up function
 Input Connectors 4 BNC connectors  DVA-1000 Secure key writer for software copyright protection
 Video Standard Composite for NTSC/PAL
 Capture Resolution Up to 720 x 480 (NTSC)/720 x 576 (PAL) Packing List
 Frame Rate 30 fps (NTSC)/25 fps (PAL/SECAM)
 Startup manual X1
 Image Processing Hardware adjustment of hue, contrast, saturation, and  Utility CD X1
brightness  Standby power cable X1
 Data Output Format Multiple YCrCb, RGB and YUV planar formats supported  Power & reset connection cable X1
Selectable pixel density: 8, 16, 24, and 32 bits per pixel (Card to PC)

Host Communication
 Host Interface PCI v2.2
 Max. Card Up to 4 cards in one PC system, setting by DIP switch
with LED indicators on bracket.
 Driver and SDK Supports Microsoft Windows 2000/XP
 Demo Program Complete demo program with C++ source code for
reference
Hardware
 GPIO TTL/CMOS level 8-bit DI/O
 EEPROM 128-bytes EEPROM for programming
 Dimensions (W x L) 119.91 x 106.69 mm (4.72” x 4.20”)
 Power Consumption +5 V DC input by PCI bus, max. 330 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating) -20 ~ 70° C
(-4 ~ 158° F; Non-operating)
Wake-up
Timer wake-up 10 sets of indicated time to wake up system
Trigger wake-up 2 trigger pins to wake up system

1-4
 1
Video Add-on Cards
Block Diagram
2
Video Recording Systems &
Storage Servers

3
Digital Signage

Dimension Diagram

Unit: mm

Online Download www.advantech.com/products 1-5

 DVP-7020A 16 Channel PCI-bus Video Capture Card
with WDT, GPIO

Patent Pending Features

 Supports 16 channel composite inputs and captures up to D1 resolution at
30/25 fps frame rate
 CONEXANT Fusion 878A video decoder chip on board
 Built-in 128-byte user programmable EEPROM
 Up to 4 cards installed in one PC, setting by onboard DIP switch
 32 bit TTL/CMOS level Digital I/O
 Watchdog timer for system fail over
 Automatic wake-up function with 10 pre-set times and 2 external trigger
inputs. (DVP-7020AX)
 Programmable software protection key

Introduction
DVP-7020A is a 4 channel input PCI-bus, video capture card. It supports up to 16 channel (4 x 4) inputs with shared frame technology and captures up to D1 resolution at 30/25 fps
frame rate. DVP-7020A allows up to 4 cards installed in one PC system by onboard DIP switch setting and identifies card IDs by LED indicators. DVP-7020A supports NTSC/PAL
composite video input through BNC connectors. DVP-7020A has an auto wake-up function with several pre-defined times to wake the system from a dormant state. This function can
also be triggered by an outside signal via 2 digital trigger pins. It also has a built-in watchdog timer to reset the system and prevent the system from hanging when unknown errors
occur. DVP-7020A is designed with programmable software protection for copy protection issues.

Specifications Ordering Information

Video  DVP-7020A 4 channel PCI capture card
 Input Connectors 4 BNC connectors  DVP-7020AX 4 channel PCI capture card with auto wake-up function
 DVA-1000 Secure key writer for software copyright protection
 Video Standard Composite for NTSC/PAL
 Capture Resolution Up to 720 x 480 (NTSC)/768 x 576 (PAL)
 Frame Rate 30 fps (NTSC)/25 fps (PAL)
 Image Processing Hardware adjustment of hue, contrast, saturation, and Packing List
brightness  Startup manual X1
 Data Output Format Multiple YCrCb, RGB and YUV planar formats supported  Utility CD X1
Selectable pixel density: 8, 16, 24, and 32 bits per pixel  Standby power cable X1
Host Communication (DVP-7020AX) (P/N: 1703020451)
 Power & reset connection cable (Card to PC) X2
 Host Interface PCI v2.2
(DVP-7020AX) (P/N: 1703020303)
 Max. Card Up to 4 cards in one PC system, setting by DIP switch
with LED indicators on bracket
 Driver and SDK Supports Microsoft Windows® 2000/XP
 Demo Program Complete demo program with C++ source code for
reference
Hardware
 GPIO TTL/CMOS level 32-bit DI/O
 EEPROM 128-bytes EEPROM for programming
 Dimensions (W x L) 174.61 x 98.41 mm ( 6.88” x 3.88”)
 Power Consumption +5 V DC input by PCI bus, max. 330 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)-20 ~ 70° C
(-4 ~ 158° F; Non-operating)
Auto Wake-up (DVP-7020AX)
 Timer wake-up Up to 10 pre-set times to wake up system
 Trigger wake-up 2 trigger pins to wake up system

1-6
 DVP-7020A

Block Diagram
1
Video Add-on Cards

2
Video Recording Systems &
Storage Servers

3
Digital Signage

Dimension Diagram

Unit: mm (inch)

Online Download www.advantech.com/products 1-7

 DVP-7410 1 Channel MPEG-1/2/4 Decoder Card

Features
 Supports MPEG-1/2 and MPEG-4 (Microsoft MP4 and DivX) real-time
hardware video decoder up to 1920 x 1080 resolution
 Supports MPEG-1 Layers 1, 2, 3 (MP3) and linear PCM audio decoding
with sample rates of 32, 44.1, 48, 88.2,96, 176.4, or 192 kHz
 NTSC/PAL composite video output
 PCI 2.1 compliant/ 4 bit GPIO Function
 Supports Microsoft Windows® 2000/XP

Introduction
The DVP-7410 is a single-chip audio/video decoder that supports SVCD, VCD1.x, XCD 2.0, CD-DA, and CD-ROM media formats as well as the ISMA (Internet Streaming Media
Alliance) streaming format. Video decoding support includes MPEG-1, MPEG-2, MP@ML, and MPEG-4 advanced simple profile (without GMC and QPEL). Audio decoding support
includes 16-bit MPEG-1 Layers 1 and 2 (down mixed to stereo), and 16-bit linear PCM DVD support includes hardware CSS decryption, 16:9 and 4:3 aspect ratios, letterboxing,
3:2 pull-down, multiple angles, and sub-picture. The programmable video output display controller includes high quality arbitrary scaling and an OSD frame buffer with 16-levels of
alpha blending. Output resolutions up to 1920 x 1080, interlaced or progressive, are supported with a refresh rate up to 120 Hz. Brightness, contrast, and color controls are provided
to optimize the video display.

Specifications Ordering Information

Video  DVP-7410 1 channel MPEG-1/2/4 decoder card
 Output Connector 1 BNC connector
 Input Connector 1 pin header Packing List
 Video Standard Composite for NTSC/PAL
 Startup manual X1
 Resolution Up to D1  Utility CD X1
 Video Decoding MPEG-1, MPEG-2, MPEG-4 (Supporting
Microsoft/DivX/SigmaDesign format)
 Image Processing Hardware video decoder
 Data input Format MPEG-4 (Supporting Microsoft/DivX/
SigmaDesign format) MPEG-2 MPEG-1
Audio
 Out Connectors 1 audio phone jack
 Audio Standard Supports MPEG-1 Layers 1 ,2 ,3 (MP3) and
linear PCM audio decoding with sample rates of
32, 44.1, 48, 88.2, 96, 176.4, or 192 kHz
Host Communication
 Image Processing PCI v2.1
 Driver and SDK Supports Microsoft Windows® 2000/XP
 Demo Program Complete demo program with C source code for
reference
Hardware
 Dimensions (W x L) 119.91 x 63.627 mm
 Power Consumption + 5/3.3 V DC input by PCI bus, max. 2000 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)
-20 ~ 70° C (-4 ~ 158° F; Non-Operating)

1-8
 DVP-7410

Block Diagram
1
Video Add-on Cards

2
Video Recording Systems &
Storage Servers

3
Digital Signage

Dimension Diagram

Unit: mm (inch)

Online Download www.advantech.com/products 1-9

 DVP-7421 4 Channel MPEG 1/2/4 Video/Audio Codec
PCI Card with EEPROM

Preliminary Features
 Supports 4 channels of MPEG-1/2/4 real-time video encoding up to D1
resolution and 30/25 fps
 NTSC/PAL Composite video input through BNC connectors
 Hardware video encoding engine on board
 Built-in 128-byte user programmable EEPROM
 Up to 4 cards installed into one PC system, set by onboard DIP switch
 PCI v2.2 compliant
 Supports MS-Windows® 2000/XP with drivers and SDK
 Supports MPEG Layer-3 audio encoding

Introduction
DVP-7421 is a high-end, hardware encoder PCI-bus based MPEG4 video capture card with onboard MPEG1/2/4 video encoder chip that supports up to D1 resolution and 30/25fps
performance. The DVP-7421 has 4 NTSC/PAL video inputs and allows up to 4 cards to be connected in one PC system through a DIP switch setting, it also displays the card ID on
LED indicators.
The hardware MPEG 1/2/4 video encoder engine can reduce the main CPU’s load and the programmer’s coding time. The dynamically adjustable bit and frame rate can accommodate
variable bandwidths, thereby optimizing the quality and bandwidth for better results. Through the onboard 128 byte EEPROM space, the programmer can place the protection code
or system parameters via our complete SDK, which comes with sample source code for programming reference.

Specifications
Video
 Input Connectors 4 BNC connectors Hardware
 Video Standard Composite for NTSC/PAL  EEPROM 128 Bytes EEPROM with SDK for programming
 Resolution QVGA/QVGA/D1  Dimensions (W x L) 162.7 x 97.5 mm
 Frame Rate 30 fps (NTSC)/25 fps (PAL)  Power Consumption + 5 V DC input by PCI bus, max. 2000 mA
 Video Encoding MPEG-1, MPEG-2, MPEG-4, H.263  Temperature 0 ~ 50° C (32 ~ 122° F; Operating)
 Image Processing Hardware control of brightness, contrast, hue and -20 ~ 70° C (-4 ~ 158° F; Non-Operating)
saturation
 Compression Programmable GOP structures supporting: MPEG4 - I,
IP ; MPEG1/2 - I, IP, IBP, IBBP. Ordering Information
Advanced MPEG-4 bit-rate control (CBR/VBR) from  DVP-7421 4 Channel MPEG 1/2/4 Video/Audio Codec PCI Card
128 kbps to 15 Mbps dynamically adjustable bit rate with EEPROM & GPIO
and frame rate
 Data Output Format MPEG-4 Simple Profile @ L3 support (Supporting
Microsoft / DivX / SigmaDesign format) MPEG-2 MP
Packing List
@ ML MPEG-1  DVP-7421 PCI card X 1
 Startup manual X 1
Audio  Utility CD X 1
 Audio Encoding Supports MPEG Layer-3 audio encoding

Host Communication
 Host Interface PCI v2.2
 Max. Card Up to 4 cards in one PC system, setting by DIP switch
with LED indicators on bracket
 Driver and SDK Supports Microsoft Windows 2000/XP
 Demo Program Complete demo program with C source code for
reference

1-10
 DVP-7421

Block Diagram
1
Video Add-on Cards

A/V A/V A/V A/V A/V 2

Video Recording Systems &
Storage Servers

Preview
Engine
MEPG
MPEG
Encoder
MPEG
Encoder
MPEG
Encoder
MPEG
Encoder
Preview
Engine
3
Digital Signage
Decoder
#2 #1 #2 #3 #4 #1

PCI Bridge

PC Host

Dimension Diagram
162.62 [6.41]
SW1 1 J1
J2
1 J3
CH4
CH3

98.47 [3.88]
CH2
CH1

J5

J7

Unit: mm (inch)
J6

Online Download www.advantech.com/products 1-11

 DVP-1020 4 Channel PC/104-Plus Video Capture
Module with WDT, GPIO, Auto Wake-up

Features
 4 channel composite input, captures up to D1 resolution at 30/25 fps frame rate
 Four CONEXANT Fusion 878A video decoder chips on board
 Built-in 128-byte user programmable EEPROM
 Up to 3 modules installed in one PC, set by onboard DIP switch
 8-bit TTL/CMOS level Digital I/O
 Watchdog timer for system fail-over
 Programmable software protection key

Introduction
DVP-1020 is a 4 channel video input PC/104-Plus video capture module that supports up to D1 resolution at 30/25 fps frame rate. DVP-1020 allows installation of up to 3 modules
in one PC system by utilizing an onboard DIP switch setting that identifies card ID by LED indicators. DVP-1020 supports NTSC/PAL signals and digitalizes data to PC through
PC/104-Plus interface. DVP-1020 also has a built-in watchdog timer to reset the system and prevent crashes when an unknown error occurs. DVP-1020 is also designed with a
programmable software protection key for anonymous user software copy protection.

Specifications Ordering Information

 DVP-1020 4 channel PC/104 Plus video capture card
Video


Video Standard
Capture Resolution
Composite for NTSC/PAL
Up to 720 x 480 (NTSC)/768 x 576 (PAL)
Packing List
 Frame Rate 30 fps (NTSC)/25 fps (PAL)  DVP-1020 PC/104-Plus video capture module X1
 Image Processing Hardware adjustment of hue, contrast, saturation, and  Utility CD X1
brightness  Standby power wire (p/n: 1700000575) X1
 Data Output Format Multiple YCrCb, RGB and YUV planar formats  Connection wire for WDT (p/n: 1703020303) X1
supported  Connection wire for power switch (p/n: 1703020303) X1
 Selectable pixel density 8, 16, 24, and 32 bits per pixel  Wire for video input (p/n: 1700000860) X4
 BNC board (p/n: 9696NC2000) X4
Host Communication
 Host Interface PC/104-Plus
 Max. Card Up to 3 modules in one PC system, set by DIP switch
with LED indicators
 Driver and SDK Supports Microsoft Windows® 2000/XP
 Demo Program Complete demo program with C++ source code for
reference

Hardware
 GPIO 8-bit TTL/CMOS level DI/O
CMOS level 8-bit DI/O
 EEPROM 128-byte EEPROM for programming
 Dimensions (W x L) 90.17 x 96.01 mm (3.55" x 3.78")
 Power Consumption +5 V DC input by PCI bus, max. 330 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)
-20 ~ 70° C (-4 ~ 158° F; Non-operating)

1-12
 DVP-1020

Block Diagram
1
Video Add-on Cards
4 channels D1 input

2
16 channels input by shared frame

Video Recording Systems &

Storage Servers

CONEXANT 878A CONEXANT 878A

3
Digital Signage
Programmable
software protection Micro-controller
key
CONEXANT 878A CONEXANT 878A

Auto wake-up
function
PC/104-
Plus

PCI Bridge

Dimension Diagram
3.20 [0.13]

96.01 [3.78]

85.73 [3.37]

80.01 [3.15]
90.17 [3.55]
Unit: mm (inch)

Online Download www.advantech.com/products 1-13

 DVP-1411E 1 Channel Network-based MPEG-4
A/V Video Encoder Module

Preliminary Features
 Supports NTSC/PAL composite video input for MPEG-4 video encoding on
standard 10/100 Mbps Ethernet, follows standard RTCP video streaming
protocol
 Hardware audio/video encoding engine on board
 Modularized design, easy to customize for different housings
 Provides Windows® 2000/XP OCX/ActiveX library for video decoding
function configuration
 Very low power consumption design
 Supports RS-485 interface for remote PTZ control
 Supports local console setting by RS-232

Introduction
Designed for OEM and industrial applications, DVP-1411E is a modularized, compact, and high performance MPEG-4 based networking video server module for digital video / audio
IP-based surveillance systems. DVP-1411E follows standard network streaming protocols with RTCP / G.263 for video/audio streaming transmission. DVP-1411E enables users to
view high quality live video and audio from any networked computer. System integrators can use the SDK to integrate digital video into their own applications. With a passive RS-485
interface, DVP-1411E can transfer commands via a PTZ controller over the network to remotely control the camera.

Specifications Ordering Information

Video  DVP-1411E 1-ch Network based MPEG-4 A/V video server module
 Input connectors Pin-header from carrier board
 Video standard Composite for NTSC/PAL
 Resolution VGA/CIF/QVGA Packing List
 Frame rate 10 fps (VGA)/25 fps (CIF)  Startup manual X1
 Video encoding MPEG-4  Utility CD X1
 Compression Adjustable bit rate and frame rate
 Data output format Format MPEG-4 Simple Profile
 Input connectors Pin-header from carrier board/Stereo input
Audio
 Compression G.726
Others
 PTZ control Direct forwarding commands from remote PC
 Max. connections Up to 3 PCs simultaneously
 Driver and SDK Supports Microsoft Windows 2000/XP on client side;
video decoder and commands setting by OCX/ActiveX
interface
 Demo program Complete demo program with C++ source code for
reference
 Network Interface 10/100 Mbps Ethernet to carrier board
Hardware
 Dimensions (W x L) 48 x 78 mm
 Power consumption +3.3 V DC input, max. 900 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)
-20 ~ 70° C (-4 ~ 158° F; Non-Operating)

1-14
 DVP-1411E

System Diagram
1
Video Add-on Cards

DVP-1411E
A/V input
Camera
C 2
Video Recording Systems &
Storage Servers

3
RS-485
(PTZ Ctrl)

Digital Signage
PC Ethernet

Ethernet

HUB Ethernet
C
A/V input
DVP-1411E Camera
Ethernet RS-485
(PTZ Ctrl)
RS-232
PC
Local IPC

Online Download www.advantech.com/products 1-15

 DVP-1411D 1 Channel Network-based MPEG-4
Video Decoder Module

Preliminary Features
 Build-in standard 10/100 Mbps Ethernet interface
 Support MPEG-4 video streaming and G.726 audio decoding from DVP-1411E
 Supports NTSC/PAL composite video output for regular TV system
 Hardware audio/video decoding engine on board
 Very low power consumption design
 Supports RS-485 interface for remote control
 Supports local console setting

Introduction
Designed for industrial applications and surveillance market, DVP-1411D is a modularized, compact, and high performance network-based MPEG4 video decoder for digital video
/ audio IP-based digital surveillance systems. DVP-1411D follows standard network streaming protocols with RTCP/G.726 for video/audio streaming transmission. DVP-1411D
enables users to view high quality live video and audio from DVP-1411E encoder specific video encoder. With a passive RS-485 interface, DVP-1411D can transfer commands over
the network. With DVP-1411 series, it’s very easy and fast to re-cable & upgrade the traditional surveillance equipments to network-based surveillance system with remote monitoring
function. No need to re-cabling if new camera is added.

Specifications Ordering Information

 DVP-1411D 1 Channel Network-based MPEG-4 Video Decoder
Video Module
 Input connectors Pin-headers from carrier board


Video output
Resolution
Composite for NTSC/PAL
VGA/QVGA/CIF
Packing List
 Frame rate 10 fps (VGA)/25 fps (CIF)  DVP-1411D module X 1
 Data input format MPEG-4 Simple Profile  Startup manual X 1
 Utility CD X 1
Audio
 Support format G.726

Others
 PTZ control Direct forwarding commands via RS-485 interface
 Demo program Complete demo program with C++ source code for
reference
 Network Interface 10/100 Mbps Ethernet

Hardware
 Dimensions (W x L) 48 x 78 mm
 Power consumption +3.3 V DC input, max. 900 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)
-20 ~ 70° C (-4 ~ 158° F; Non-Operating)

1-16
Block Diagram
1
Video Add-on Cards

2
Video Recording Systems &
Storage Servers

LAN
A/V
Decode SOC
Video
3
Digital Signage

A/V streaming
Audio
RS232 RS232 GPIO

CTRL CON CTRL

Application Diagram

DVP-1411E DVP-1411D
Video #1 Video #1
CAM1 (Cable #1) (Cable #1) Monitor1

DVP-1411E DVP-1411D
Video #2 Video #2
CAM2 (Cable #2) (Cable #2)
Monitor2
ing....
lin
DVP-1411E Easy for cab DVP-1411D
Video #3 Video #3
(Cable #3) (Cable #3)
CAM3 Monitor3
LAN Cable
LAN HUB LAN HUB

DVP-1411E DVP-1411D
Video #X Video #X
(Cable #X) (Cable #X)
CAMX

Online Download www.advantech.com/products 1-17

 DVP-1412 1 Channel MPEG-1/2/4 Digital Video/Audio
Encoder Module

Features
 Supports NTSC/ PAL MPEG-1/2/4 real-time video/audio encoding up to D1
resolution at 30/25 fps
 Hardware video encoding engine on board
 Audio data fingerprint embedded in video stream for perfect S/W
synchronization
 Up to 8-modules can be installed into one PC system, set by onboard DIP
switch
 High speed USB 2.0 interface
 Supports MS Windows® 2000/XP with driver and SDK

Introduction
Designed for embedded video/audio applications or upgrades to digital video, the DVP-1412 is a compact-sized, embedded hardware MPEG-1/2/4 A/V encoder module that is easily
integrated into many different types of equipment such as Panel PCs, ATM machines, and embedded PCs etc. The DVP-1412 is capable of delivering streaming video up to full D1
resolution at a full-motion frame rate. By using a standard high-speed USB 2.0 interface, the DVP-1412 easily integrates with most Single Board Computers or PC-based systems.
Using the 128-byte EEPROM, programmers can write protection code or set system parameters via the SDK. DVP-1412 delivers standard composite video and audio input through
BNC connectors and comes complete with SDK and driver for MS Windows 2000 or XP OS environments, making DVP-1412 very easy for system integrators to develop applications.
DVP-1412 is an ideal compact embedded digital video and audio solution for multiple applications.

Specifications Ordering Information

Video / Audio  DVP-1412 1-ch MPEG-1/2/4 video/audio encoder module for composite
input
 Input connectors BNC or pin-header
 Video standard NTSC/PAL
Full D1/VGA/CIF/QVGA
 Resolution
from 176 x144 to 720 x 576
 Frame Rate 30fps (NTSC)/25fps (PAL) Packing List
 Video Encoding MPEG-1, MPEG-2, MPEG-4  Internal USB cable X1
MPEG-4 Simple Profile @ L3 plus B-Picture support  Utility CD X1
 Data Output format MPEG-2 MP @ ML
MPEG-1
 Audio output Stereo input, PCM format data stream output
Host Communication
 Host interface High-speed USB 2.0
 Max. module Up to 8 modules in one PC system, set by DIP switch
 Driver and SDK Supports Microsoft Windows 2000/XP
Complete demo program with C++ source code for
 Demo program
reference
Hardware
 EEPROM 128 bytes, includes SDK for programming
 Dimensions (W x L) 70 x 38 mm
 Power consumption +5 V DC input by USB bus
0 ~ 60° C (32 ~ 140° F; Operating)
 Temperature
-20 ~ 70° C (-4 ~ 158° F; Non-Operating)

1-18
 DVP-1412

Block Diagram
1
Video Add-on Cards

2
Video Recording Systems &
Storage Servers
Video
ADC
MPEG
encoder
USB
controller USB 2.0
3
Digital Signage

Audio
ADC

EEPROM
Buffer RAM

Dimension Diagram

Unit: mm (inch)

Online Download www.advantech.com/products 1-19

 Socket 478 Pentium® 4/Celeron®

AIMB-741E-DVP Industrial ATX Motherboard with WDT/

AGP/ LAN/CF (400/533 MHz FSB)

Features
 Socket 478 Pentium® 4/Celeron® up to 3.06/2.2 GHz
 Intel® 845E chipset 400/533 MHz FSB
 Supports AGP 1x/2x/4x slot
 10/100Base-T Ethernet onboard
 6 X USB 2.0 ports
 CMOS automatic backup and restore to prevent accidental data loss of BIOS
setup
 Bootable CompactFlash®-II interface
 Built-in watchdog timer
 Industrial grade motherboard with long life support

Specifications
Processor System Power Requirement
 CPU (0.13 & 0.09 micron) Intel Pentium 4 Intel Celeron  Typical Pentium 4 3.06 GHz/2 GB DDR RAM
 Max. Speed 3.06 GHz (533 FSB) 2.4 GHz +3.3 V +12 V
 L2 Cache 512/256 KB 128 KB 5.95 A 4.52 A
 Chipset Intel- 845E + ICH4 Environment
 BIOS Award 4 Mbit FWH Operating Non-Operating
Bus  Temperature 0 ~ 60° C (32 ~ 140° F), -20 ~ 70° C
 Front Side Bus 400/533 MHz depends on CPU’s speed (-4 ~ 158° F)
 AGP AGP 2.0 with 1x, 2x, and 4x, 1.5 V only, Physical
1 slot  Dimensions (W x L) 304.8 x 228.6 mm (12” x 9”)
 PCI 32-bit/33 MHz, 5 slots
Memory
 Technology DDR 200/266 SDRAM with ECC supported
 Max. Capacity
 Socket
2 GB
184-pin DIMM x 2
Ordering Information
Ethernet  AIMB-741E-DVP P4 ATX industrial motherboard with LAN/CF/WDT
 Interface 10/100Base-T
 Controller Intel 82562 (FE)
 Connector RJ-45 Packing List
EIDE  FDD cable X1 1700340640
 Mode ATA 100/66/33  IDE HDD cable X2 1701400452
 Channel 2 (Max. 4 devices)  COM port cable kit X1 1701090401
I/O Interface  Jumper pack X1 9689000068
 USB Max. 6 (USB 2.0 compliant), 4 ports by  I/O port bracket X1 1962015680
pin-headers
 Startup manual X1 --
 Audio 2 (LINE-Out and MIC-In)
 Utility CD X1 --
 Serial 2 (RS-232)
 Parallel 1 (SPP/EPP/ECP)


FDD
PS/2
1
2 (Keyboard and Mouse)
Accessory Options
 CPU cooler for Pentium 4 up to 2.8 GHz 1759214200
Watchdog Timer for 1U chassis
 Output Interrupt, system reset
 Interval Programmable 1 ~ 255 sec
Miscellaneous
 Solid State Disk 1 Type I/II CompactFlash socket

1-20
 AIMB-741E-DVP

Block Diagram
1
Video Add-on Cards

2
Processor

4 0 0 /5 3 3 M H z FSB
Video Recording Systems &
Storage Servers

DDR 200 /266 with ECC

3
Digital Signage
AGP Slot AGP 4 X Intel 82845 E
DDR 200 /266 wtih ECC

H u b L i n k 1 .5

2 6 6 M B /s

2 ATA 100
ports
ATA 33 /66 /100 LAN Intel
82562

6 USB Ports U SB 2 .0 /1 .1 Intel 82801 DB

ICH 4

Audio AC -97
3 2 b i t /3 3 M H z PCI B u s

Codec

LPC Bus

3 2 -b i t /3 3 M H z
PCI 1 ~5 Sl o t
Super IO
BIOS Winbond
W83627 HF

Online Download www.advantech.com/products 1-21

 DVP-1410H USB 2.0 Hub Module for DVP-1410 Series

Features
 USB 2.0 interface, up to 480 Mbps throughput
 One upstream and four downstream, supporting up to four DVP-1412 series
video modules on USB 2.0 host controller
 Fully backward compatible with USB 1.1 interface and devices
 Designed for embedded applications, using 3.5" FDD (+5 V) power connector
 Same form factor and mounting holes as DVP-1412
 Provides bus fault detection and over-current protection

Introduction
Designed for embedded applications, DVP-1410H is a USB 2.0 add-on module. Some Single Board Computers are limited by only two internal USB connectors, but if the system
needs more, up to four DVP-1410H video modules can be added to allow system integrators to easily and cost effectively expand the system. Internally, the DVP-1410H uses a
standard PC 3.5" FDD power connector as the power source to provide each DVP-1410H USB 2.0 module a full power supply with over-current protection. The DVP-1410H is also
backwards compatible with USB 1.1 standards and has one upstream and four downstream ports.

Specifications Ordering Information

 USB Connectors 2.0 mm pin-header  DVP-1410H USB 2.0 Hub module for DVP-1410 series
 Downstream Ports 4
 Data Transfer Rate Supports Hi-Speed 480 Mbps USB 2.0 and Full-
Speed 12 Mbps USB 1.1
 LED Indicators Power x 1, Link x 4, Fail x 4 (for each port) Packing List
 Power Connector 2.54 mm pin-header, same as 3.5" FDD  Internal USB cable X4
 USB Interface USB 2.0 (backward compatible with USB 1.1)  Startup manual X1
 OS Supporting MS Windows® 2000/XP, Linux
 Driver and SDK Driver-less in Win ME/2000/XP and above
 Dimensions (W x L) 70 x 38 mm
 Power Consumption +5 V DC input by Floppy Disk power line, max. 150 mA
 Temperature 0 ~ 60° C (32 ~ 140° F; Operating)
-20 ~ 70° C (-4 ~ 158° F; Non-Operating)

1-22