0% found this document useful (0 votes)
111 views8 pages

Post Box No.: 1038, Street No. 41, New Industrial Area, Doha, Qatar

The document provides installation instructions for fire dampers. It lists approved models of fire dampers and their maximum panel size limitations for horizontal and vertical assemblies. It also provides supplemental instructions regarding general installation guidelines, installing multiple panel/section assemblies, installing sleeves, and allowing for expansion clearances.

Uploaded by

smartayaz1987
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views8 pages

Post Box No.: 1038, Street No. 41, New Industrial Area, Doha, Qatar

The document provides installation instructions for fire dampers. It lists approved models of fire dampers and their maximum panel size limitations for horizontal and vertical assemblies. It also provides supplemental instructions regarding general installation guidelines, installing multiple panel/section assemblies, installing sleeves, and allowing for expansion clearances.

Uploaded by

smartayaz1987
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

w ww.k mcq ata r.

co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
w w w.k mc q at a r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
INSTALLATION INSTRUCTION

Standard Installation
Fire Damper Models: 38S, 30S, 317, 38S(SS), 30S(SS), 317(SS), 38D, 30D, D37

APPLICATION

This is to of installation that is d so that


plan of th s is within th f at d mas y/ on t o m tal o wood f d gy m d

This may in position with


in position, only in a of ls
in position, only in a of

MULTIPLE PANEL SIZE LIMITATIONS

i ntation Ho i ontal V ti al
A mbly Max Pan l Max Assy 165° Max Assy 212° Max Pan l Max Assy 165° Max Assy 212°
38SA, 30SA, 317A 48"Wx48"H 72"Wx36"H 72"Wx36"H 36"Wx36"H 72"Wx72"H 72"Wx72"H
48"Wx43"H d t 72"Wx32"H t 72"Wx32"H d t 36"Wx32"H d t 72"Wx68"H t 72"Wx68"H d t
38SB, 30SB, 317B
(48"Wx48"H f am ) (72"Wx36"H f am ) (72"Wx36"H f am ) (36"Wx36"H f am ) (72"Wx72"H f am ) (72"Wx72"H f am )
46"Wx42"H t 70"Wx31"H t 70"Wx31"H t 34"Wx31"H 70"Wx67"H 70"Wx67"H
38SC, 30SC, 317C
(48"Wx48"H f am ) (72"Wx36"H f am ) (72"Wx36"H f am ) (36"Wx36"H f am ) (72"Wx72"H f am ) (72"Wx72"H f am )
38SAX, 30SAX, 317AX 48"Wx48"H 48"Wx48"H 48"Wx48"H 36"Wx36"H 36"Wx36"H 36"Wx36"H
48"Wx43"H d t 48"Wx43"H t 48"Wx43"H t 36"Wx32"H d t 36"Wx32"H t 36"Wx32"H d t
38SBX, 30SBX, 317BX
(48"Wx48"H f am ) (48"Wx48"H f am ) (48"Wx48"H f am ) (36"Wx36"H f am ) (36"Wx36"H f am ) (36"Wx36"H f am )
46"Wx42"H t 46"Wx42"H t 46"Wx42"H t 34"Wx31"H 34"Wx31"H 34"Wx31"H
38SCX, 30SCX, 317CX
(48"Wx48"H f am ) (48"Wx48"H f am ) (48"Wx48"H f am ) (36"Wx36"H f am ) (36"Wx36"H f am ) (36"Wx36"H f am )
38SA(SS), 30SA(SS),
not availabl not availabl not availabl 47"Wx48"H 93"Wx48"H 93"Wx48"H
317A(SS)
47"Wx42"H t 93"Wx42"H t 93"Wx42"H t
Mod l

38SB(SS), 30SB(SS),
not availabl not availabl not availabl
317B(SS) (47"Wx48"H f am ) (93"Wx48"H f am ) (93"Wx48"H f am )
38SC(SS), 30SC(SS), 45"Wx41"H t 91"Wx41"H t 91"Wx41"H t
not availabl not availabl not availabl
317C(SS) (47"Wx48"H f am ) (93"Wx48"H f am ) (93"Wx48"H f am )
38DA, 30DA, D37A 24"Wx24"H 24"Wx24"H not availabl 36"Wx36"H 72"Wx36"H 72"Wx36"H
24"W x21"H d t 24"W x21"H d t 36"W x32"H d t 72"W x32"H d t 72"W x32"H d t
38DB, 30DB, D37B not availabl
(24"W x24"H f am ) (24"W x24"H f am ) (36"W x36"H f am ) (72"W x36"H f am ) (72"W x36"H f am )
22"W x20"H d t 22"W x20"H d t 34"W x31"H d t 70"W x31"H d t 70"W x31"H d t
38DC, 30DC, D37C not availabl
(24"W x24"H f am ) (24"W x24"H f am ) (36"W x36"H f am ) (72"W x36"H f am ) (72"W x36"H f am )
38DAX, 30DAX, D37AX 24"Wx24"H 24"Wx24"H not availabl 36"Wx36"H 36"Wx36"H 36"Wx36"H
24"W x21"H d t 24"W x21"H d t 36"W x32"H d t 36"W x32"H d t 36"W x32"H d t
38DBX, 30DBX, D37BX not availabl
(24"W x24"H f am ) (24"W x24"H f am ) (36"W x36"H f am ) (36"W x36"H f am ) (36"W x36"H f am )
22"W x20"H d t 22"W x20"H d t 34"W x31"H d t 34"W x31"H d t 34"W x31"H d t
38DCX, 30DCX, D37CX not availabl
(24"W x24"H f am ) (24"W x24"H f am ) (36"W x36"H f am ) (36"W x36"H f am ) (36"W x36"H f am )

SUPPLEMENTAL INSTALLATION INSTRUCTIONS / SUBMITTAL DATA

T tions
S v s

w w w.k mc q at a r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
INSTALLATION INSTRUCTION

INSTALLATION
1 General: installation of and all to shall to NFPA-90A and SMACNA
and Radiation Installation All shall also to

2 Multiple Panel / Multiple Section Assembly: f to pag 5 fo tails

3 Sleeves: installation of not shall


as to it is shall to SMACNA ASHRAE A
is atta d to th f with 1" long d Fast s shall b st d on a h sid of th f on 6" maxim m nt s
and 2-3/4" shall not than 6" an
If an may to a of 16"

4 Expansion Clearance: in wall shall to


and shall of 1/4" o 1/8" (3/16" foot of
width and shall not 1
/8" (3/16" foot of
width and ht pl s 2

Example: Fo a galvani d with a o tsid nsions of 36"W x 48"H, th gap at th top pl s th gap at th bottom m st b
b t n 0 5" and 2 5 Th gap at th l ft sid pl s th gap at th ht sid m st b b t n 0 375" and 2 375 Th an b lo at d
any in th g and d not b nt d

5 Damper Orientation: s t d v ti ally st b inst d so th s at th top Th n b posit d so that


ow is f m t ion Fo s with s , it is t to hav a ss to th sid of th opposit th l g blad
Th l g option an b tili d n this is not t s t d tally t b inst d so that th blad lo
points f g d Th ai flow n b f m it tion It is st to hav s to th sid at th opposit th
g blad (top s Th l g option an b tili d n this is not t l

6 Retaining Angle Attachment: shall in so will a of 1" on


th wall, in g at th o n Th angl s shall b fl sh against th ba i Th g atta d to th damp an t n away om o into
shall on all and on both of to only, with 1/4"
and bolts by with 1" in All shall on 6"
t s and 2-3/4" (a of 2 shall a
of 1-1/2" x 7/ 8" x 16-GA st l s of s not d tog t fo s with width o ht sions g 24" Fo
damp 24"W x 24"H o small th o n of th p im t m nting angl s an b d Som lo al od s may not allow w ld d
of not of and
not with

7 Caulking: shall of following: Dow RTV732, Sil-Bond RTV 4500, IS808, RTV300
is and and and of wall
on ion l ing is not db t n th damp s v and th wall o floo insid th g

shall DP1010

w w w.k mc q ata r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
INSTALLATION INSTRUCTION

INSTALLATION (CONTINUED)

8 Duct Connections: All shall not shall at not


as shall shall a of 16-GA on not
36" 24" high 24" and 14-GA on shall not 10-GA
with a Th following y t-to-s tions may b
d: Plain “S” Slip, “S” Slip, Insid Slip, d “S” Slip, Standing “S” Slip, Standing “S” Slip (Ba f , Stan ding “S” Slip
(Angl nfo ), and Standing “S” Slip (Alt t B ) B away joints shall ha no than two No 10 s t tal s on h
sid and on th bottom Th s ws shall t at both sid s of th slip po W na a away joint is s d along th top and bottom
a slip no than 20 is on two

Plain "S" Slip Do bl "S" Slip Slip Joint H mm d "S" Slip

Standing "S" Slip Standing "S" Slip "S" Slip Standing "S" Slip

if following
is no than
Oval is no than 71"W x
to SMACNA ASHRAE
4 An oval d o dd l ss than o l to 24" is atta d to th t nsition olla with #8 s t m tal ws (a min m of 4
fast s tion) A dd diam t at than 24" is atta d to th t nsition olla with #10 s t m tal s ws (a
m of 5 fast s onn ion)
Damp with d/oval ansitions that fall o tsid of th s i ions m st s a 4" wid d awband onn ion as shown in th SMACNA
and Radiation Installation

9 Maintenance: shall at as in NFPA 90A and may


and A is to on of ion and

w w w.k mc q at a r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
INSTALLATION INSTRUCTION
STANDARD MOUNTING DETAILS
Type A, Vertical Type B, Factory Sleeve, Type C, Factory Sleeve,
Vertical Vertical

taining Angl O ap
(S No 6) Expansion
(S No 4)

t Conn to
(S No 8)

P t taining Angl Ai flow


(S No 6)

6" o 16" Maxim m 6" o 16" Maxim m


(S No 3) (S No 3)
Type C, Factory Sleeve,
Horizontal

Type A, Horizontal Type B, Factory Sleeve,


Horizontal

Blad Ramp Points Blad Ramp Points Blad Ramp Points


F g Downwa d Fa ing Downwa d Fa ing Downwa d

Type B, Field Sleeve, Alternative Type B, Field Type C, Field Sleeve,


Vertical Sleeve, Vertical Vertical
10-GA Minim m

2" Maxim m

Alternative Type B, Field Sleeve, Type C, Field Sleeve,


Horizontal Horizontal
Type B, Field Sleeve, 10-GA Minim m
Horizontal
2" Maxim m

Blad Ramp Points Blad Ramp Points Blad Ramp Points


F g Downwa d Fa ing Downwa d Fa ing Downwa d

w ww.k mc q ata r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com
INSTALLATION INSTRUCTION

MULTIPLE PANEL / MULTIPLE SECTION INSTALLATION DETAILS

1 ship in to

2 with ship to shipping limitations may


than ship If than ship is ship will

3 shown all in that


ship not by ship
will ship as ship will ship as
within not

4 installations is than Having ion


a to into

5 on is additional al of
by in position and in

Vertical Installation Horizontal Installation

38S, 30S, 317, 38S(SS), 30S(SS), 317(SS);


38S, 30S, 317,
2
38S(SS), 30S(SS), 317(SS);
at All
1

38S, 30S, 317,


38S(SS), 30S(SS), 317(SS);
2 Width)
at All

ht

Width

ht

Width

DETAIL 1 DETAIL 2

1/2" Long B ds on 8" Max nt s on


1" Long W , on 7" Max
Both Fa s
t s, 2-3/4" Max f m Ends
OR
St d on Both F s
1/4" Bolts and on 8"
nt s on Both Fa s

4-7/8" x 14-GA n Plat


(Sam Mat l as )
7/8" x 7 x 7/8" x 14-GA nZ
(Sam Mat l as )

w w w.k mc q ata r. co m
POST BOX No. : 1038, STREET No. 41, NEW INDUSTRIAL AREA, DOHA, QATAR
PHONE : 44980628, 44114635, 44184109, EMAIL : info@kmcqatar.com

You might also like