0% found this document useful (0 votes)
63 views2 pages

Eflow4N8V Power Supply/Charger

The eFlow4N8V is a power supply and charger that converts 220VAC input into eight 12VDC or 24VDC fuse-protected outputs. It has built-in battery charging, supervision of AC power, battery status, and fire alarm triggers. The unit is housed in an enclosure measuring approximately 13.5" x 13" x 3.25" and can accommodate up to two 12V batteries.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
63 views2 pages

Eflow4N8V Power Supply/Charger

The eFlow4N8V is a power supply and charger that converts 220VAC input into eight 12VDC or 24VDC fuse-protected outputs. It has built-in battery charging, supervision of AC power, battery status, and fire alarm triggers. The unit is housed in an enclosure measuring approximately 13.5" x 13" x 3.25" and can accommodate up to two 12V batteries.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

eFlow4N8V

Power Supply/Charger
Rev. DSeFlow4N8V_05222015

Overview
eFlow4N8V is a power supply/charger that converts a 220VAC (working range
198VAC - 256VAC), 50/60Hz input into eight (8) fuse protected 12VDC or
24VDC outputs.

eFlow4N8V

Specifications
Input: Fire Alarm Disconnect:
• 220VAC (working range 198VAC - 256VAC), • Supervised Fire Alarm disconnect (latching or
50/60Hz, 2.1 amp. non-latching) 10K EOL resistor. Operates on a
• Input fuse: 5A/250V. normally open (NO) or normally closed (NC) trigger.
Output: Electrical:
• Eight (8) fuse protected outputs. • Operating temperature: 0º C to 49º C ambient.
• 12VDC or 24VDC @ 4.0 amp supply current. • BTU/Hr.:
• Outputs are rated @ 2.5 amp. 12VDC: 24.57 BTU/Hr.
• Auxiliary output rated @ 1 amp (unswitched). 24VDC: 49.15 BTU/Hr.
• Overvoltage protection. • System AC input VA requirement: 462VA.
Battery Backup: Visual Indicators:
• Built-in charger for sealed lead acid or gel type batteries. • Green AC Power LED indicates 220VAC present.
• Maximum charge current 1.54 amp. • AC input, DC output, and Battery LED indicators.
• Automatic switch over to stand-by battery when Additional Features:
AC fails. Transfer to stand-by battery power is • Short circuit and overload protection.
instantaneous with no interruption. • Unit is complete with power supply, enclosure,
Supervision: battery leads, and cam lock.
• AC fail supervision (form “C” contacts). Mechanical:
- Notification trigger is selectable for • Enclosure Dimensions (H x W x D approx.):
30 seconds (factory set) or 2 hours. 13.5” x 13” x 3.25” (343mm x 330mm x 83mm)
• Battery fail and presence supervision - Accommodates up to two (2) 12VDC/7AH batteries.
(form “C” contacts). • Product weight (approx.): 6.7 lbs. (3.04 kg).
• Low power shutdown. Shuts down DC output terminals • Shipping weight (approx.): 7.6 lbs. (3.45 kg).
if battery voltage drops below 71-73% for 12V units
and 70-75% for 24V units (depending on the power
supply). Prevents deep battery discharge.

Agency Approvals

CE - European Conformity
Enclosure Dimensions (H x W x D approximate):
13.5” x 13” x 3.25” (343mm x 330mm x 83mm)
1.40” 4.85” 4.85” 1.40”
(36mm) (123mm) (123mm) (36mm)

1.20”
(31mm)

3.25”
(83mm)

12.5”
1.20” (318mm)
0.75” 0.75” 1.20”
(31mm) 11.0” (31mm)
(19mm) (279mm) (19mm)

0.9375”
1.40” (24mm) 1.40”
(36mm) (36mm)

5.10” 5.10”
(130mm) (130mm)

13.0”
(330mm)

5.10”
(130mm)
6.5625”
(167mm)

0.9375”
(24mm)

3.25”
3.25” (83mm)
(83mm)

3.25”
(83mm)

1.0” 1.0”
(25mm) (25mm)

1.0” 10.5” 1.0”


(25mm) (267mm) (25mm)

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com

You might also like