Scribd
Upload
71 views1 page

Copier Finisher ROM Upgrade

This document provides information about a ROM upgrade for the MX-FNX3/FNX4 digital full color copier option. The upgrade addresses an issue where one staple position on the front side could not be stapled depending on the alignment plate state. It upgrades the ROM from version 0106D0 to 0106D1. It also changes the finisher PWB part number but notes the previous PWB can still be used after the ROM upgrade.

Uploaded by

phu polyfax
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views1 page

Copier Finisher ROM Upgrade

This document provides information about a ROM upgrade for the MX-FNX3/FNX4 digital full color copier option. The upgrade addresses an issue where one staple position on the front side could not be stapled depending on the alignment plate state. It upgrades the ROM from version 0106D0 to 0106D1. It also changes the finisher PWB part number but notes the previous PWB can still be used after the ROM upgrade.

Uploaded by

phu polyfax
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Date : May.

16, 2013

DIGITAL FULL COLOR COPIER(OPTION) : MX-FNX3/FNX4 No. : CCE-1153

Technical Report

ROM UPGRADE ..... (4).

1. Model Name: MX-FNX3/FNX4(Option for MX-5500N/6200N/6201N/7000N/7001N)

2. Description: Upgrade of Finisher ROM


From April 2013 production
Model Name ROM control No. Version
MX-FNX3 A14
0106D0
MX-FNX4 A16
Item of change:
1. When performing 2 Staples, in some cases, one position on the front side could not be stapled
depending on the stop state of the alignment plate. This problem has been corrected.
Note: In accordance with the ROM version upgrade, the parts code of the Finisher PWB has
been changed. But the Finisher PWB before the change can be used by upgrading with
the ROM so it is not necessary to replace the Finisher PWB with the one after the change.

3. Parts Action:
Current parts New parts Inter-
Ref. Model Price Effective chang
Version P/G No. Q'ty Parts name
No. name rank time e-
Parts code Parts code ability
MX-FNX3
1 ALL 7-106 0CW4146K52010 0CW4146K52011 CM 1 FINISHER PWB U 2013/4 3
MX-FNX4
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. 5. Interchangeable if replaced with same types of
New type cannot be used in place of current type. related parts in use.
3. Current type cannot be used in place of new type.
6. Others.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.

ROM Version History Table


No. ROM control No. Version Action T/R No
(3) A03 0104D0 2007/6 CCE-471
(2) A02 0103D0 2007/2 CCE-430
(1) A01 0102D0 2006/7 CCE-343

1/1
SHARP CORPORATION Document Systems Division C

You might also like