Scribd
Upload
87 views1 page

Machining Deviation & Surface Finish Guide

This document provides dimensions and specifications for machining a raw material block. Key dimensions include 785, 424, 378, 200, and 320. Tolerances for machining dimensions range from 0.1 to 3 depending on the size of the dimension. Surface finish symbols include rough, fine, and hardened. The material is specified as MS rolled. The approximate weight is 730.2 kg. The document is the sole property of MCMPL.

Uploaded by

patelchiragis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views1 page

Machining Deviation & Surface Finish Guide

This document provides dimensions and specifications for machining a raw material block. Key dimensions include 785, 424, 378, 200, and 320. Tolerances for machining dimensions range from 0.1 to 3 depending on the size of the dimension. Surface finish symbols include rough, fine, and hardened. The material is specified as MS rolled. The approximate weight is 730.2 kg. The document is the sole property of MCMPL.

Uploaded by

patelchiragis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

N/A

Raw Material Size

785

424

378
200
378
49

320 C/C
28 200 C/C
325 210

785

Remark:
This drg. is the sole MAXWELL CRUSHTECH

SHEET: A3 - 420MM X 297MM


Machining Deviation for open Dimension property of MCMPL BLOCK NO.:188, OPP. FUTURA ENGINEERING, ISAND ROAD,
Over 6 30 120 315 1000 2000 AT.: CHHATRAL, TAL.: KALOL, DIST.: GANDHINAGAR, GUJARAT-382729, INDIA.
Dim >4000 DESCRIPTION
Up to & Inc. 6 30 120 315 1000 2000 4000 MDL. BY SHAILESH Material:
MS_ROLLED
Tolerance 0.1 0.2 0.3 0.5 0.8 1.2 2 3
DRN. BY shailesh MVE 9000/1 Approx Weight:
Surface finish Symbols
CHD. BY CHIRAG
~
730.2 Kg
it should not be copide CHIRAG
DRG. NO. REVISION:-
Raw Fine Hardness APP. BY
or communicated to any OLI MOTOR R0 Sheet No.:-
Roughness Smoothness Finishing Ground
Smooth unmachined Finishing &Ground
1/1
For roughness values see IS:11505 person without the written DATE 11-Aug-2017

approval of the proprietors SCALE NTS


Untill and unless specified, All Dimensions are in MM Z:\MOTOR\OLI MOTOR\

You might also like