Name of Work - Exterior Façade Treament & Interior Renovation for Reception for SIDBI Tower ,15 ,

Ashok Marg, Lucknow

COST SUMMARY OF MAJOR CIVIL, INTERIOR FITMENTS AND ELECTRICAL WORKS

Sl. No. Amount in Rs.
Description
AS PER SOR AS PER DSR AS PER MR TOTAL AMOUNT
A CIVIL WORK
1 EARTH WORK 30842.50 0.00 0.00 30842.50
2 CONCRETE WORK 17171.34 0.00 0.00 17171.34
3 REINFORCEMENT CONCRETE WORK 231282.00 314414.92 0.00 545696.92
4 GRC JALI 0.00 0.00 2063959.83 2063959.83
5 BRICK WORK 734836.42 15154.49 0.00 749990.91
6 STRUCTURAL GLAZING WORK 0.00 10765030.22 1614050.75 12379080.97
7 WOOD & PVC WORK 0.00 2675975.06 0.00 2675975.06
8 STEEL WORK 1374882.80 7846.45 93984.00 1476713.24
9 WATER PROOFING 0.00 31111.13 0.00 31111.13
10 FINISHING (Plaster, paint etc) 3499.79 1260832.30 0.00 1264332.09
11
TILES, STONE WORK & STAMP CONCRETE 0.00 2853133.03 28245451.19 31098584.22
12 FALSE CEILING 0.00 494565.44 0.00 494565.44
13 DISMANTLING 0.00 382261.21 2727272.30 3109533.51
14 MISCELLANEOUS WORK & FURNITURE 0.00 0.00 1556773.80 1556773.80
15 HORTICULTURE & LANDSCAPING 0.00 0.00 643129.88 643129.88
16 PLUMBING WORKS 0.00 231862.46 401352.54 633215.00
17 ELECTRICAL WORKS 189712.00 715258.64 1033786.00 1938756.64
TOTAL (A) 2582226.84 19747445.35 38379760.28 60709432.48

PERCENTAGE QUOTED

GRAND TOTAL (IN FIGURES)

GRAND TOTAL (IN WORDS)

Note - All the amount is exclusive of GST

 Name of Work - Exterior Façade Treament & Interior Renovation for Reception for SIDBI Tower ,15 , Ashok Marg, Lucknow
BOQ SIDBI TOWER As per PWD 2018 and DSR 2016
SIDBI TOWER
AS PER SOR AS PER DSR AS PER MR
DESCRIPTION OF ITEM OF WORK
PWD/D Item No. AMOUNT RATE AMOUNT AMOUNT
S.N. QTY UNIT RATE (Rs) RATE (Rs)
SR NBO (Rs) (Rs) (Rs) (Rs)

EARTH WORK
EXCAVATION in foundation in ordinary Soil ( Loam clay or sand )
including lift upto 1.5m lead upto 30.0 m & including filling watering
and ramming of excavated earth into the space between the building &
1 251 PWD LKO sides of foundation trenches or into the plinth and removal & disposal
surplus earth as directed by the engineer I/C within a lead of 30
m.from foundation trenches.
104.25 CUM. 110.00 11467.50

Filling of available excavated earth in trenches, plinth, sides of

foundation etc. inlayers not exceeding 20 cms in depth, consolidating
2 255 PWD LKO
each deposited layer by ramming and watering including lead upto 50m
& lift upto 1.50m. 0.00 CUM. 75.00 0.00

Providing and injecting chemical emulsion for preconstructional

antitermite treatment and creating a chemical barrier under and alround
the coloumn pitswall tench basement excavation top surface if plinth
filling junction of wall and floor along the external perimer of binding
expansion joints,surrounding of pipes and conduits etc.complete(plinth
area of the building at ground floor only shall be measured as per
I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other
approved material such as hepthachlor or chlordance will be used.The
3 PWD LKO rate of application of chemical emulsion shall be as follows:- (1)
treatment for masonary & foundation 5 litres per sq.m. (2) back fill in
immediate contract with foundation 7.5 litre per sq.m (3)treatment of
top surface of plinth filling 5 liters per sq.m. (4) treatment of soil
along external parameter of building 7.50 lire per sq.m.

77.50 CUM. 250.00 19375.00

SUB TOTAL 30842.50 0.00 0.00

CONCRETE

SIDBI Tower
Repair Renovation
Civil Interior works Page 1
 Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8
graded stone ballast 40 mm. nominal size) including supply of all
materials, labour and T&P etc. required for proper completion of the
4 281 PWD LKO work and curing complete, also including cost of formwork in
foundation.
3.17 CUM. 5410.00 17171.34

SUB TOTAL 17171.34 0.00 0.00

REINFORCED CEMENT CONCRETE

Providing and laying in position ready mixed M-25 grade concrete for
reinforced cement concrete work, using cement content as per approved
design mix, manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified
grade for reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the cost of
centering, shuttering finishing and reinforcement, including cost of
5 5.33 DSR admixtures in recommended proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability without impairing
strength and durability as per direction of the Engineer-in-charge. (Note
:- Cement content considered in this item is @ 330 kg/cum.Excess/less
cement used as per design mix is payable/recoverable separately).

5.33.1 All works upto plinth level 10.56 CUM. 6489.33 68514.35

SIDBI Tower
Repair Renovation
Civil Interior works Page 2
 Providing and laying in position ready mixed M-25 grade concrete for
reinforced cement concrete work, using cement content as per approved
design mix, manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified
grade for reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the cost of
centering, shuttering finishing and reinforcement, including cost of
6 5.33 DSR admixtures in recommended proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve workability without impairing
strength and durability as per direction of the Engineer-in-charge. (Note
:- Cement content considered in this item is @ 330 kg/cum.Excess/less
cement used as per design mix is payable/recoverable separately).

5.33.2 A All works above plinth level upto floor V level 22.00 CUM. 7298.28 160551.96

Mild steel or iron in plain work such as in reinforced concreted or

reinforced brick work (when not included in overall rates) wrought to
required shape as necessary including bending for proper completion of
7 504 PWD LKO
the work and including supply of steel its wastage. Bend hooks and
authorized overlapping shall be measured.
42.83 QTL 5400.00 231282.00

Centering and shuttering including strutting, propping etc. and removal

8 5.9 DSR
of form for :
Foundations, footings, bases of columns, etc. for mass concrete 46.76 SQM 195.24
5.9.1
9129.43
5.9.3 Suspended floors, roofs, landings, balconies and access platform 121.50 SQM 425.11 51648.96
5.9.4 Shelves (Cast in situ) 0.00 SQM 425.11 0.00
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers 42.69 SQM 345.18 14736.53
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 20.88 SQM 470.96 9833.69
5.9.8 Spiral staircases (including landing) 0.00 SQM 383.94 0.00
5.9.10 Extra for Arches, Domes, Vaults exceeding 6 m span 0.00 SQM 454.81 0.00
5.9.17 Cornices and mouldings 0.00 SQM 568.86 0.00
5.9.19 Weather shade, Chajjas, corbels etc., including edges 0.00 SQM 525.22 0.00
Suspended floors, roofs, landings, balconies and access platform. with 0.00 SQM 500.76
5.9.20
water proof ply 12 mm thick 0.00
Extra for shuttering in circular work (20% of respective centering and SQM
5.9.14
shuttering items)
For Columns 0.00 SQM 94.19 0.00
For Beams 0.00 SQM 69.04 0.00

SUB TOTAL 231282.00 314414.92 0.00

SIDBI Tower
Repair Renovation
Civil Interior works Page 3
 GRC JALI WORK

Providing & fixing GRC panel (60mm thick) on external walls as per
the architectural drawing. Fixing to be done on external wall including
the necessary SS clamps, scaffoldings required etc. complete by
9 MR specilised vendor in strict supervision of manufacturer as per direction
of Engineer-in-Charge. 60 MM THICK
381.37 SQM 5412.00 2063959.83

SUB TOTAL 0.00 0.00 2063959.83

BRICK WORK
Class-150 brick work in 1:6 cement and COARSE sand mortar in
303+ foundation and plinth including supply of all materials, labour tools and
10 PWD LKO
307-306 plants, etc. Required for proper completetion of the work.
3.72 CUM 3650.00 13560.95

303+30 Class-150 brick work in 1:6 cement and COARSE sand mortar in
7-306+ SUPERSTRUCTURE including supply of all materials, labour tools
11 PWD LKO
309 and plants, etc. Required for proper completetion of the work
+310
A GROUND FLOOR 44.35 CUM 4265.00 189140.11
B 1ST FL. 12.63 CUM 4307.65 54403.40
C 2ND FL. 9.30 CUM 4350.30 40450.10
D 3rd FL. 9.30 CUM 4392.95 40846.67
E 4rth FL. 9.30 CUM 4435.60 41243.24
F 5th FL. 9.30 CUM 4478.25 41639.81
G 6th FL. 9.30 CUM 4520.90 42036.38
H 7th FL. 12.06 CUM 4563.55 55028.35
I 8th FL. 6.40 CUM 4606.20 29480.75
J TERRACE 7.93 CUM 4648.85 36865.10

Class-150 reinforced HALF brick work in 1:4 cement and COARSE

305b+3 sand mortar in SUPERSTRUCTURE including supply of all
12 09+310 PWD LKO materials, labour tools and plants, etc.
+310a

A GROUND FLOOR 13.00 CUM 4790.00 62278.16

B 1st FL. 2.12 CUM 4837.90 10242.56
C 2nd FL. 1.82 CUM 4885.80 8888.74
D 3rd FL. 1.82 CUM 4933.70 8975.88
E 4th FL. 1.82 CUM 4981.60 9063.02
F 5th FL. 1.82 CUM 5029.50 9150.17
G 6th FL. 1.82 CUM 5077.40 9237.31
H 7th FL. 1.82 CUM 5125.30 9324.46
I 8th FL. 1.82 CUM 5173.20 9411.60
J TERRACE 2.60 CUM 5221.10 13569.64

SIDBI Tower
Repair Renovation
Civil Interior works Page 4
 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars
13 6.15 DSR at every third course of half brick masonry. 264.81 SQM 57.23 15154.49

SUB TOTAL 734836.42 15154.49 0.00

ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make conforming
to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and
size, including necessary filling up the gaps at junctions, i.e. at top,
bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and
14 21.1 DSR jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing / paneling, C.P. brass / stainless
steel screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing, paneling and dash fasteners
to be paid for separately)

powder coated aluminium (minimum thickness of powder coating 50

21.1.1.2 A
micron) 64.80 KG 387.06 25081.33

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings
wherever required including the cost of EPDM rubber / neoprene gasket
21.1.2.2 B required (Fittings shall be paid for separately) Powder coated
aluminium (minimum thickness of powder coating 50 micron)

70.20 KG 447.86 31439.73

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of
15 21.3.2 DSR engineer-in-charge (Cost of aluminium snap beading shall be paid in
basic item): With float glass panes of 5.50 mm thickness
7.20 SQM 1010.63 7276.52

SIDBI Tower
Repair Renovation
Civil Interior works Page 5
 Providing and fixing 12 mm thick prelaminated particle board flat
pressed three layer or graded wood particle board conforming to IS:
12823 Grade l Type ll, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc.
16 21.2.2 DSR complete as per architectural drawings and directions of engineer-in-
charge Pre-laminated particle board with decorative lamination on both
sides
3.60 SQM 872.36 3140.51

Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS 6315 having brand logo
embossed on the body/plate with double spring mechanism and door
weight upto 125 kg, for doors, including cost of cutting floors,
embedding in floors as required and making good the same matching to
17 21.4 DSR
the existing floor finishing and cover plates with brass pivot and single
piece M.S. sheet outer box with slide palte etc. complete as per the
direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness.

Floor Spring 3.00 NO 2068.07 6204.20

Providing and fixing 12 mm thick frameless toughened glass door

shutter with all hardware of approved brand and manufacture,
including providing and fixing top & bottom pivot & spring type fixing
18 21.18 DSR+ AR arrangement and making necessary holes etc. for fixing required door
fittings, all complete as per direction of Engineer-in-charge

21.75 SQM 7839.51 170509.28

Providing and fixing 12 mm thick toughened glass automatic sensor

based sliding door shutter with all hardware of approved brand and
19 MR manufacture, all complete as per direction of Engineer-in-charge
1.00 SET 131658.00 131658.00

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved
shop drawings , the aluminium quality as per grade 6063 T5 or T6 as
per BS 1474,including super durable powder coating of 60-80 microns
conforming to AAMA 2604 of required colour and shade as approved
20 25.1 DSR by the Engineer-in-Charge. ( The item includes cost of material such as
cleats, sleeves, screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra shall be paid on this account).
for STRUCTURAL GLAZING WORK

6024.32 KG 340.48 2051189.79

SIDBI Tower
Repair Renovation
Civil Interior works Page 6
 Designing, fabricating, testing, protection, installing and fixing in
position semi (grid) unitized system of structural glazing (with open
21 25.2 DSR joints) for linear as well as curvilinear portions of the building for all
heights and all levels, including:

a) Structural analysis & design and preparation of shop drawings for

the specified design loads conforming to IS 875 part III (the system
must passed the proof test at 1.5 times design wind pressure without
any failure), including functional design of the aluminum sections for
fixing glazing panels of various thicknesses, aluminium cleats, sleeves
and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,
structural and weather silicone sealants, flashings, fire stop (barrier)-
cum-smoke seals, microwave cured EPDM gaskets for water tightness,
pressure equalisation & drainage and protection against fire hazard
including:

926.82 SQM 2425.93 2248400.57

Providing, assembling and supplying visionglass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass (double
glazed) vision panel units of size and shape as required and specified,
comprising of an outer heat strengthened float glass 6mm thick, of
approved colour and shade with reflective soft coating on surface # 2 of
approved colour and shade, an inner Heat strengthned clear float glass
6mm thick, spacer tube 12mm wide, dessicants, including primary seal
and secondary seal (structural silicone sealant) etc. all complete for the
required performances, as per the Architectural drawings, as per the
approved shop drawings, as specified and as directed by the Engineer-in-
22 25.3 DSR Charge. The IGUs shall be assembled in the factory/ workshop of the
glass processor. (Payment for fixing of IGU Panels in the curtain
glazing is included in cost of item No.26.2) For payment, only the
actual area of glass on face # 1 of the glass panels (excluding the areas
of the grooves and weather silicone sealant) provided and fixed in
position, shall be measured in sqm

1268.90 SQM 3755.52 4765366.51

SIDBI Tower
Repair Renovation
Civil Interior works Page 7
 Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such as heavy
duty stainless steel friction hinges, min 4 -point cremone locking sets
with stainless steel plates, handles, buffers etc. including necessary
23 25.4 DSR stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete
as per the Architectural drawings, as per the approved shop drawings,
as specified and as directed by the Engineerin- Charge.

46.34 SQM 2961.17 137220.47

Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of
24 21.8 D.S.R. approved quality as per architectural drawings and direction of
Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width 293.50 RMT 62.87 18450.99608

Providing & fixing of 12 mm toughned glass partition with all 344.74 SQM 4300 1482392.75
hardware as per design with edge polish all complete as per
25 MR
drawing, specification and direction of engineer incharge. NSI

Design supply & installation of suspended Spider Glazing system

designed to withstand the wind pressure as per IS 875 (Part-III). The
Suspended System held with Spider Fittings of SS-316 Grade Steel of
approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel Spider
& bolt assembly with laminated glass fins 21 mm thick. The Glass fins
and glass panel assembly shall be connected to
Slab/beams by means of SS- 316 Grade stainless steel brackets &
Anchor bolts and at the bottom using SS channel of 50x25x2mm using
fastener & anchor bolts, non staining weather sealants of approved
make, Teflon/ nylon bushes
26 25.8 DSR and separators to prevent bi-metallic contacts, all complete to perform
as per specification and approved drawings. The complete system to be
designed to accommodate thermal expansion & seismic movements etc.
The joints between
glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of
the assembly to be filled with non staining weather sealant, so as to
make the entire system fully water proof & dust proof.

SIDBI Tower
Repair Renovation
Civil Interior works Page 8
 The rate shall include all design, Engineering and shop drawing 186.50 SQM 6974.64 1300750.314
including approval from structural designer, labour, T&P, scaffolding,
other incidental charges including wastage, enabling temporary services
all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS
channel laminated glass etc. all complete. For the purpose of payment,
actual elevation area of Glazing including thickness of joints and the
portion of Glass panel inside the SS channel shall be measured. (Colour
of glass will be approved by architect)

SUB TOTAL 0.00 10765030.22 1614050.75

DOOR WINDOW WOOD/FRP WORK

Providing and fixing bright finished brass 100 mm mortice latch and
lock with 6 levers and a pair of lever handles of approved quality with
27 9.76 DSR
necessary screws etc. complete.
3.00 NO 560.15 1680.45

Providing and fixing aluminium tower bolts, ISI marked, powder coated
(minimum thickness of powder coating 50 micron) transparent or dyed
28 9.97.2 DSR to required colour or shade, with necessary screws etc. complete :
250x10 mm.

250x10 mm 9.00 NO 88.69 798.17

200x10 mm 3.00 NO 76.66 229.97

Providing and fixing aluminium handles, ISI marked, powder coated

(minimum thickness of powder coating 50 micron) transparent or dyed
29 9.100.1 DSR to required colour or shade, with necessary screws etc. complete :125
mm.
9.00 NO 51.44 462.96

Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour and shade, with necessary
30 9.101.1 DSR
screws etc. complete. Single rubber stopper

6.00 NO 27.73 166.40

Providing and fixing fly proof stainless steel grade 304 wire gauge, to
windows and clerestory windows using wire gauge with average width
31 9.135.2 DSR
of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete. With 12 mm mild steel U beading 342.08 SQM 1,101.38 376757.09

SIDBI Tower
Repair Renovation
Civil Interior works Page 9
 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness .The laminate shall be moulded with fire
resistant grade unsaturated polyester resin and chopped mat. Door frame
32 9.121 D.S.R. laminate shall be 2 mm thick and shall be filled with suitable wooden block
in all the three legs. The frame shall be covered with fiber glass from all
sides. M.S. stay shall be provided at the bottom to steady] the frame.

45.40 RMT 418.26 18989.18

Providing and fixing to existing door frames 30 mm thick Glass Fibre

Reinforced Plastic (FRP) panelled door shutter of required colour and
approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for
forming hollow rails and styles, with wooden frame and suitable blocks
33 9.122.1 D.S.R. of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to
IS: 14856, including fixing to frames.

12.39 SQM 2201.90 27281.54

SIDBI Tower
Repair Renovation
Civil Interior works Page 10
 Providing and fixing factory made UPVC white colour sliding glazed
door comprising of UPVC multi-chambered frame with in-built roller
track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll forming process of
required length (shape & size according to UPVC profile), appropriate
dimension UPVC extruded glazing beads, UPVC extruded interlock and
UPVC extruded Inline sash adaptor (if required), EPDM gasket, wool
pile, zinc alloy (white powder coated) handle with key on one side of
extreme panels along with zinc plated mild steel multi point locking
having transmission gear with keeps, zinc alloy (white powder coated)
cresent lock (if required), stainless steel (SS 304 grade) body with
adjustable double nylon rollers (weight bearing capacity to be 120 kg),
G.I fasteners 100 x 8 mm size for fixing frame to finished wall and
34 9.147F D.S.R. necessary stainless steel screws etc. Profile of frame & sash shall be
mitred cut and fusion welded at all corners, including drilling of holes
for fixing hardware's and drainage of water etc. After fixing frame the
gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and of
approved quality, all complete as per approved drawing & direction of
Engineer-in- Charge. (Single / double glass panes, wire mesh and
silicon sealent shall be paid separately). Note: For uPVC frame and
sash extruded profiles minus 5% tolerance in dimension i.e. in depth &
width of profile shall be acceptable.

Three track three panels sliding door with fly proof S.S wire mesh
(Two nos. glazed & one no. wire mesh panels) made of (big series)
9.147F. frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of
4 2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
342.08 SQM 6576.31 2249609.30

SUB TOTAL 0.00 2675975.06 0.00

MS/ SS WORK

Mild steel or iron work of small size and sections such as holding down
bolts, hold fast, tie rods, grating etc. wrought to required shape as
necessary for bending etc including supply fo steel and its wastage
including cost of bolts, nuts if required, welding, grinding and making
35 503 PWD holes as required for completion of work in heavy sections such as
trusses, built up gates, record racks, roof work, gates etc. including
riveting or welding where necessary.

23502.27 K.G. 58.50 1374882.80

SIDBI Tower
Repair Renovation
Civil Interior works Page 11
 Providing and fixing chemical anchor fastner 10X160 mm, chemical
36 MR VM- 250 at all height required for fabrication work.
712.00 NO 132.00 93984.00

Providing and fixing stainless steel (Grade 304) railing made of hallow
tubes, chanells, plates etc. including welding grinding buffing, polising
and making corvechare (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing railing with
necessary accessories and stainless steel dash fasteners, stainless steel
bolts etc. of required size on the top of the floor or the side of waist slab
37 10.28 DSR with suitable arrangement as per approval of Engineer in charge.(for
payment purpose only weight of stainless steel members shall be
considered excluding fixing assessories such as nuts, bolts, fasteners
etc.

16.50 KG 475.54 7846.45

SUB TOTAL 1374882.80 7846.45 93984.00

WATER PROOFING
37 Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terracesetc consisting of following operations:(a) Applying a
slurry coat of neat cement using 2.75 kg/sqm of cement admixed with
water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto
300 mm height including cleaning the surface before treatment. (b)
Laying brick bats with mortar using broken bricks/brick bats 25 mm to
115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and
approved by Engineerin- charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-
in-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-
charge..

SIDBI Tower
Repair Renovation
Civil Interior works Page 12
 (d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge
including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement
slurry and making pattern of 300x300 mm square 3 mm deep. SUB
HEAD : 22- WATER PROOFING 1548 (e) The whole terrace so
finished shall be flooded with water for a minimum period of two weeks
for curing and for final test.“All above operations to be done in order
and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as
22.7.1 DSR
65 mm. 20.00 SQM. 1041.53 20829.40

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water
proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/ sqm. This layer will be
allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
38 22.5 DSR proofing cement compound @ 0.126 kg/sqm. This layer will be allowed
to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all
joints, corners, junctions of pipes and masonry with polymer mixed
slurry.
34.24 SQM 300.28 10281.73

SUB TOTAL 0.00 31111.13 0.00

FINISHING
12 mm cement plaster in single coat on smooth side of single or half
brick wall for interior plastering upto floor two level including brick
wall for interior plastering upto floor two level including internal
39 13.4.2 DSR rounded angles chamfers and/or rounded angles not exceeding 80mm in
girth and finished evenand smooth no. extra for mixing and additive.
(iii) 1cement :6 C. sand ON INNER SURFACE
100.27 SQM 169.37 16982.29

15 mm cement plaster in single coat on rough side of single or half

brick wall for interior plastering upto floor two level including internal
40 13.5.2 DSR rounded angles not exceeding 80mm in girth and finished even and
smooth (i) 1 cement: (iii) 1 cement: 6 coarse sand
5184.21 SQM 195.89 1015557.84

SIDBI Tower
Repair Renovation
Civil Interior works Page 13
 41 12 mm cement plaster in single coat on fair side of single or half brick
wall for single or half brick wall for interior plastering upto floor two
level including brick wall for interior plastering upto floor two level
583+58 Item No. including internal rounded angles chamfers and/or rounded angles not
7 NBO exceeding 80mm in girth and finished evenand smooth no. extra for
mixing and additive. (i) 1 cement: 3 course sand in ceiling.

20.00 SQM. 175.00 3499.79

42 13.21 DSR Extra for providing and mixing water proofing material in cement
plaster work in proportion recommended by the manufacturers. 420.00 PER BAG 50.68 21287.67

Wall painting with acrylic emulsion paint of approved brand and

43 13.60.1 DSR manufacture to give an even shade :
Two or more coats on new work
220.53 SQM 85.01 18748.03

44 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
13.46.1 DSR including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

83.94 SQM. 96.69 8116.24

Finishing with Epoxy paint (two or more coats) at all locations

prepared and applied as per manufacturer's specifications including
45 13.52.1 DSR appropriate priming coat, preparation of surface, etc. complete.
948.67 SQM 123.31 116985.56

PProviding and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall
46 13.80 DSR
surface to prepare the surface even and smooth complete.s.
304.48 SQM 87.93 26772.92

Providing and applying plaster of paris putty of 2 mm thickness over

47 13.26 DSR plastered surface to prepare the surface even and smooth complete.
304.48 SQM 119.49 36381.75

SUB TOTAL 3499.79 1260832.30 0.00

TILES AND STONE FLOORING WORK

SIDBI Tower
Repair Renovation
Civil Interior works Page 14
 Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge, in skirting, risers of steps and
48 11.36 DSR dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse
sand) and jointing with grey cement slurry @ 3.3kg per sqm, including
pointing in white cement mixed with pigment of matching shade
complete.
173.24 SQM. 749.75 129886.38

Providing and laying rectified antiskid Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer),
of 1st quality conforming to IS : 15622, of approved make, in all
colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on
49 11.40 DSR 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing
with grey cement slurry @ 3.3 kg/ sqm including pointing the joints
with white cement and matching pigments etc., complete.

41.81 SQM. 907.04 37925.62

Providing and laying Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
50 8.12 DSR cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineerin- Charge :

73.38 SQM 2907.06 213322.92

Providing and laying machine cut, mirror polished, Italian Marble stone
flooring laid in required pattern in linear portion of the building all
complete as per architectural drawings, with 18 mm thick stone slab
laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement :
4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm
51 including pointing with white cement slurry admixed with pigment to
match the marble shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer-in-Charge.

264.74 SQM 5039.40 1334112.99

SIDBI Tower
Repair Renovation
Civil Interior works Page 15
 Providing and fixing machine cut, mirror/ eggshell polished , Marble
stone work for wall lining (veneer work) including dado, skirting, risers
of steps etc., in required design and pattern wherever required, stones of
different finished surface texture, on 12 mm (average) thick cement
mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white
cement slurry @ 3.3 kg/sqm including pointing with white cement
52 8.11 DSR slurry admixed with pigment of matching shade, including rubbing,
curing, polishing etc. all complete as per Architectural drawings, and as
directed by the Engineer-in-Charge.“a. 18 mm thick Italian Marble
stone slab,Perlato, Rosso verona, Fire Red / Red Travertine etc.

163.70 SQM 6691.57 1095429.55

Providing and fixing 18mm thick gang saw cut mirror polished
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size,
approved shade, colour and texture laid over 20mm thick base cement
53 8.2.2 DSR mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc.
complete at all levels.

8.2.2.2 Area of slab over 0.50 sqm. 7.40 SQM 3134.01 23177.88

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss
54 8.3.2 DSR finish etc. complete as per design approved by Engineer-in-Charge.
Granite work.
7.36 RMT 247.33 1820.38

Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
55 8.4 DSR based adhesive, including cleaning etc. complete.

7.36 RMT 268.02 1972.63

Extra for providing opening of required size & shape for wash basin/
kitchen sink in kitchen platform, vanity counter and similar location in
56 8.50 DSR marble/Granite / stone work, including necessary holes for pillar taps
etc. including moulding, rubbing and polishing of cut edges etc.
complete.
5.00 nos. 430.80 2153.98

SIDBI Tower
Repair Renovation
Civil Interior works Page 16
 Providing and laying tactile tile of size 300x300x9.8mm having with
water absorption less than 0.5% and conforming to IS: 15622 of
approved make in all colours and shades in for outdoor floors such as
footpath, court yard, multi modals location etc., laid on 20mm thick
57 16.90 DSR base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes &
patterns including grouting the joints with white cement mixed with
matching pigments etc. complete as per direction of Engineer-in-
Charge.
9.13 SQM 1460.10 13330.70

Supply & Application of a polyacrylate, modified cementations, vertical

stamping system that can be applied over rough plastered wall to
58 AR achieve the appearance stone, wood, tile or brick.

6016.11 SQM 4105.00 24696150.74

Providing and fixing Unistone wall cladding on interior and exterior

59 AR wall of vertical garden
50.00 SQM 1322.34 66116.95

Providing and fixing 10x10x7.50 cm Granite cobble stone blocks hand

cut and chisel dressed on top, for paving in floors, drains etc. laid over
20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints
60 AR 10mm wide filled with same mortar including ruled pointing etc.
complete as per direction of engineer-in-charge.

1605.00 SQM 2170.21 3483183.50

SUB TOTAL 0.00 2853133.03 28245451.19

FALSE CEILING

SIDBI Tower
Repair Renovation
Civil Interior works Page 17
 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm
module which includes providing and fixing ‘C’ wall angle of size
20x30x20 mm made of 0.5 mm thick pre painted steel along the
perimeter of the room with help of nylon sleeves and wooden screws at
300 mm center to centre, suspending the main C carrier of size
10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help
of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C
carrier suspension clip and main carrier bracket at 1000 mm c/c.
Inverted triangle shaped Spring Tee having height of 24 mm and width
61 12.54 DSR of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C
carrier and in direction perpendicular to it at 600 mm centers with help
of suspension brackets. Wherever the main C carrier and spring T have
to join, C carrier and spring T connectors have to be used. All sections
to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip
in tiles into spring ‘T’ with

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of
size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet
having galvanizing of 100 gms/ sqm (both sides inclusive) and electro
12.54.1 statically polyester powder coated of thickness 60 microns (minimum),
including factory painted after bending.

97.73 SQM 1338.49 130808.40

Providing and Fixing 15 mm thick densified tegular edged eco friendly

light weight calcium silicate false ceiling tiles of approved texture of
size 595 x 595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanised steel sections (galvanising @ 120
grams per sqm including both side) consisting of main ‘T’ runner
suitably spaced at joints to get required length and of size 24x38 mm
made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to
centre, and cross “T” of size 24x28 mm made out of 0.33 mm
(Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm
centre to centre to form a grid of 1200x600 mm and secondary cross
62 12.53 ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick
(Minimum) sheet to be inter locked at middle of the 1200x 600 mm
panel to from grid of size 600x600 mm, resting on periphery walls
/partitions on a Perimeter wall angle pre-coated steel
ofsize(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with
the help of rawl plugs at 450 mm centre to centre with 25 mm long dry
wall screws @ 230 mm interval and laying

SIDBI Tower
Repair Renovation
Civil Interior works Page 18
 15 mm thick densified edges calicum silicate ceiling tiles of approved
texture in the grid, including, cutting/ making opening forservices like
diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever
required. Main ‘T’ runners to be suspended from ceiling using G.I.
slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia
and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with
galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200
mm centre to centre along main ‘T’, bottom exposed with 24 mm of all
Tsections shall be pre-painted with polyster baked paint, for all heights,
as per specifications, drawings and as directed by Engineer-in-Charge.

241.24 SQM 1507.86 363757.04

SUB TOTAL 0.00 494565.44 0.00

DISMANTLING

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material
63 15.7 DSR
within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar 28.70 CUM 848.36 24344.19

Dismantling doors, windows and clerestory windows (steel or wood)

64 15.12 DSR shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below 70.14 EACH 158.90 11145.24
15.12.2 Of area beyond 3 sq. metres 324.53 EACH 217.84 70695.00

Dismantling steel work manually/ by mechanical means in built up

sections without dismembering and stacking within 50 metres lead as
65 DSR per direction of Engineer-in-charge.
5630.70 KG 1.61 9069.05

Dismantling stone slab flooring laid in cement mortar including

66 15.25 DSR stacking of serviceable material and disposal of unserviceable material
within 50 metres lead. 385.22 SQM 110.08 42404.01

Dismantling of sand stone/ marble/ granite from wall of internal as well

67 MR as external upto height of 37 m from ground level including stacking 365.84 2313323.00
within 50 metres lead : 6323.32 SQM
Thickness up to 40 mm

SIDBI Tower
Repair Renovation
Civil Interior works Page 19
 Dismantling cement asbestos or other hard board ceiling or partition
walls including stacking of serviceable materials and disposal of
68 15.41 DSR
unserviceable materials within 50 metres lead.
278.80 SQM 24.46 6819.90

Dismantling G.I. pipes (external work) including excavation and

refilling trenches after taking out the pipes, manually/ by mechanical
69 15.44. DSR means including stacking of pipes within 50 metres lead as per direction
of Engineer-in-charge :
15.44.1 15 mm to 40 mm nominal bore 100.00 M 64.07 6407.34
15.44.2 Above 40 mm nominal bore 150.00 M 71.32 10698.19

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

including stacking of useful materials near the site and disposal of
70 15.52 DSR
unserviceable materials
within 50 metres lead. 5.00 NO 393.80 1969.01

Dismantling of C.I. sluice valve including stacking of useful materials

71 15.53.1 DSR within a lead of 50 metres
Up to 150 mm diameter 6.00 NO 142.09 852.53

Shifting of PVC water tank UPTO 10 KL at terrace level from one

72 MR location to another with in 50 m range along with its installation a new
location complete. 3.00 NO 800.00 2400.00

Dismantling old plaster or skirting raking out joints and cleaning the
73 15.56 DSR surface for plaster including disposal of rubbish to the dumping ground
within 50 metres lead. 6323.32 SQM 22.55 142584.52

Removing of aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling The dismantled shall be taken away by the
agency and site will be cleared off from rubbish/malba etc. complete as
74 MR
per direction of Engineer-in-charge. ( The rate include the process of
demolishing work and site clearance)
914.55 SQM 450.00 411549.30

Demolishing R.C.C. work by mechanical means and stockpiling at

designated locations and disposal of dismantled materials up to a lead
75 15.58 DSR
of 1 kilometre, stacking serviceable and unserviceable material
separately including cutting reinforcement bars. 5.00 CUM 1346.30 6731.48

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading,
transporting, unloading to approved municipal dumping ground or as
76 15.6 DSR approved by Engineer-in-charge, beyond 50 m initial lead, for all leads
including all lifts involved.
400.00 CUM 121.35 48540.75

SIDBI Tower
Repair Renovation
Civil Interior works Page 20
 SUB TOTAL 0.00 382261.21 2727272.30

MISCELLANEOUS WORK
Supply of manually operated roller blinds as per approved shade L1-
S1 Linen of MAC or approved equivalent make HARDWARE TOP
TUBE : Made of extruded aluminium 38 mm Dia. With wall thickness
of 1.2 mm with spline adoptable to accommodate clutch.CLUTCH
MECHANISM : Moulded plastic having antifriction additive with
Glass fibre reinforcement. Should have a minimum lifting capacity of 8
lbs OPERATING CHAIN : #PVC ball chain adoptable to the clutch
pitch for smooth lifting & lowering of blind.LOAD TUBE : 38 mm
Extruded aluminium wall thickness :1.2 mm + / - 5% Bonding ( Fabric
> Tube ) : 15 mm wide double sided adhesive tape of 3M Bottom Bar :
77 MR aluminium extruded box section with powder coatecd finish matching
the roller fabric -Min weight to be 365 gms / Lmr for a perfect fall of
fabric to avoid warpage / floating.Instalattion to be insert type with end
caps. Screens to be with 5% Openness Composition 22% Polyester +
78% PVC Wieght 475 gramsper sq.mtr. Thickness 0.68mm

62.43 Sqm 1660.00 103633.80

NAME PLATE: Providing Name Plate of size 375 X 150 mm in SS -

304 (Stainless steel ) and fixing the same to the required position.
78 MR
Thickness of plate engraved with SS letters shall be 3mm.
4.00 Each 680.00 2720.00

NOTICE BOARD: Providing and Supplying Notice Boards 8 cm deep

made out of BTC T.W framing 8cm X 24mm with 12mm thick Soft
Boardcovered with cloth felt on 6mm Commercial Ply BWP Grade
79 MR back and glass shutters openable on pivot hinges complete with lock
and handle. Size-1.20 m X 60 cm complete as per the drawings, details
& instructions of Architect.
1.00 Each 2500.00 2500.00

Providing and fixing Signage of Corrosion Resistant High Grade AISI

316 Stainless Steel of Size (120 mm x 120 mm x 1.5 mm ) over
80 MR
Wall/Glass/Wood etc wherever required as per Direction of E.I.C of
Kich Make or equiv to Arch,Ozone , Goodrej 8.00 Each 940.00 7520.00

Providing & Placing of Three Seater Sofa as per design,

81 MR specification and direction as approved by the Architect/
Engineer -in-Charge 4.00 NOS 29000.00 116000.00

SIDBI Tower
Repair Renovation
Civil Interior works Page 21
 Providing & Placing of Two Seater Sofa as per design
82 MR approved, specification and direction as approved by the
Architect/ Engineer -in-Charge 12.00 NOS 22700.00 272400.00

Providing & Placing of One Seater Sofa as per design,

83 MR specification and direction as approved by the Architect/
Engineer -in-Charge 4.00 NOS 16500.00 66000.00

Providing & Placing of Center Table 1400x720 mm SS pipe

frame chrome finish top PLPB 30 mm thick lower PLPB 18 mm
84 MR
thick as approved by the Architect/ Engineer -in-Charge
6.00 NOS 11000.00 66000.00

Providing & Placing of Side table 650x650 mm SS pipe frame

chrome finish top PLPB 30 mm thick lower PLPB 18 mm thick
85 MR
as approved by the Architect/ Engineer -in-Charge
12.00 NOS 8000.00 96000.00

Supply and fixing of Reception Table as per approved layout

86 MR
and specification by architect / engineer incharge. 1.00 NOS 100000.00 100000.00

Providing and making of Discussion Table in Round Shape as

per design approved color complete in all arespect.
87 MR
1.00 NOS 75000.00 75000.00

Medium Back Chair, Cushioned Chrome Arm, PP

88 MR Chrome Base, Gas Lift, Leatherite Tapestry.BIFMA accredited
12.00 NOS 14000.00 168000.00

Providing and making of Water Cascadde In Entrance area as

89 MR
per design approved and finla by engineer incharge. 1.00 NOS 400000.00 400000.00

Providing & fixing films with plotter cutting on glasses as per

design . Cristal effect make all complete as per drawing,
90 MR 45 SQM
specification and direction of engineer incharge.
1800.00 81000.00

SIDBI Tower
Repair Renovation
Civil Interior works Page 22
 Supply & Installation of 2-Level Electro Hydraulic Type Car Parking
System with all Mechanical & Electrical Arrangements. Erection and
Commissioning at the site. 1 Year On-Site Warranty for any
manufacturing defect or any other design defect.
Type- Two Post Double Parking Car Lift (Dependent or with shared
Power units). Mode of
Operation- Manual control buttons / Keys/ Automatic
Lifting Height- 1600 & 1800mm (adjustable); 1650 & 2100mm
(adjustable); 1600 & 1840mm (adjustable); Lifting Mode-
Hydraulic Car Platform
Thickness- ≥1.6mm Surface
Treatment- High-grade anti-corrosion spray paint or hot galvanized
91 MR Color- Red, Blue, Grey, Yellow etc. (customized according to user
demand ) Working Voltage-
440V/3Ph (according to user's demand), Motor Power 2.2KW, Rise
Speed 1.7m/min Fall Speed 1.9m/min Mode of Drive Hydraulic +Chain
Car Size (L/W/H)- 4000mm×1850mm×1550mm ( small)
4000mm×1850mm×2050mm (Suvs) Car
Weight ≤2000kg

NOT TO NOT TO
QUOTE NO QUOTE 0.00

SUB TOTAL 0.00 0.00 1556773.80

HORTICULTURE & LANDSCAPING

92 MR Detail of tree with development & 6 month maintenance

Indoor
Areca palm 4' - 5' height 35 NOS. 250 8750.00
Draceana varieties 50 NOS. 250 12500.00
Croton varities 50 NOS. 250 12500.00
Deffenbachia 30 NOS. 350 10500.00
Aglonema 30 NOS. 350 10500.00
Money plant with moss stick 3' height 15 NOS. 500 7500.00
Syngonium with moss stick 3' height 20 NOS. 500 10000.00
Oxycodium with moss stick 3' height 20 NOS. 500 10000.00

SIDBI Tower
Repair Renovation
Civil Interior works Page 23
 93 SHRUS (have several woody item)
Coral Hibiscus 2'-3' ht 5 NOS. 130.00 650.00
Massanda Pink 2'-3' ht 5 NOS. 130.00 650.00
Ixora 2'-3' ht 5 NOS. 130.00 650.00
Hamelia 2'-3' ht 5 NOS. 45.00 225.00

Supplying and fixing Vertical garden ( Wall) along with drip irrigation
system, fixation of frame, planter, manure, fertilizer, soil mixing,
94
supply of plants filling and plantation.
38.61 SQM 8608.00 332354.88

94 Ground edging Plant

Eranthemum 2 RMT 180.00 360.00
Verbena 2 RMT 130.00 260.00
Setcreasea 2 RMT 235.00 470.00
Verbena Mix 2 RMT 130.00 260.00

95 SS planter 18'' dia 250.00 NOS 900 225000.00

0.00 0.00 643129.88

G.TOTAL 2392514.84 18800324.25 36944621.74

581.37 LACS

SIDBI Tower
Repair Renovation
Civil Interior works Page 24
 SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF ELECTRICAL WORKS OF SIDBI TOWER , LUCKNOW (U.P.)

DSR As per SOR 2018 AS PER DSR - 2018 AS PER MARKET RATE
S.NO Ref. No. DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT
SOR Rate RATE (RS.) AMOUNT (RS.)
(RS.) (RS.)
INTERNAL WIRING & LIGHT SYSTEM

DSR 1.10.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC
1 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 POINT 120.00 883.9286 1,06,071.43
sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C
(Primary point )
DSR 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point
(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor
2 single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm POINT 25.00 631.25 15,781.25
FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (looping
point )
DSR 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface /recessed medium class PVC conduit, 2 way modular switch,
3 POINT 10.00 943.75 9,437.50
modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
DSR 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box
4 EACH 8.00 28.57143 228.57
excluding modular plate as required.
DSR 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or
5 in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular EACH 30.00 358.0357 10,741.07
switch, connections etc. as required.
DSR 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or
6 in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and EACH 10.00 441.9643 4,419.64
15/16 A modular switch, connections etc. as required.
DSR 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in
7 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, EACH 5.00 570.5357 2,852.68
“C” curve including connections, painting etc. as required.
DSR 1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC
8 insulated copper conductor, single core cable in surface/ recessed medium class PVC
conduit as required
a) 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For 6A Light Circuit Point MTR. 600.00 130.3571 78,214.29
b) 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For 6A UPS & Light Circuit Point MTR. 870.00 149.1071 1,29,723.21
c) 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For 16A Power Circuit Point MTR. 450.00 178.5714 80,357.14
d) 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire For DB Submain wire MTR. 115.00 222.3214 25,566.96
e) 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire For DB Submain wire MTR. 30.00 484.8214 14,544.64
f) 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire For DB Submain wire MTR. 50.00 671.4286 33,571.43
DSR Supplying and making end termination with brass compression gland and aluminium lugs for
9 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
KV grade as required.
a) 9.1.32 4 X 10 sq. mm (25 mm) EACH 10.00 203.00 2,030.00
b) 9.1.33 4 X 16 sq. mm (28mm) EACH 10.00 255.00 2,550.00
c) 9.1.21 3½ X 35 sq. mm (32mm) EACH - 282.00 -
d) 9.1.22 3½ X 50 sq. mm (35mm) EACH - 354.00 -
SOR 501 Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium
conductor armoured cables as per specification in existing trenches, cable trays, ducts over
10 bed of sand, clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts
including connecting testing and commissioning.
SIDBI Tower
Repair and Renovation
Electrical Works 1
 i 4 core 16 sq. mm For HVAC MTR. 100.00 343 34,300.00
l 3.5 core 50 sq. mm For DB Submain wire MTR. 50.00 492 24,600.00
SOR 503 Supplying and fixing of brass nickle plated compression gland for PVC insulated and
armoured served sheathed ,underground cable including rubber ring etc.complete in all
11
respect. The armouring of the cable shall be properly connected with the earth as per
direction of the Engineer -Incharge.
(i) 16.0 sq.mm x 4 core EACH 4.00 87 348.00
(l) 50.0 sq.mm x 3½ core EACH 2.00 178 356.00
SOR 504 Supplying and fixing of plain or pin type copper tin plated cable socket (lug) to the cable
12 leads , insulating with tape and making connection etc. complete in all respect as per
direction of the Engineer -Incharge.
(d) 16.0 sq.mm EACH 16.00 21 336.00
(e) 25 Sq.mm. EACH 2.00 27 54.00
(g) 50.0 sq.mm EACH 6.00 48 288.00

DSR 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral
13
bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as
required. (But without MCB/RCCB/Isolator)
a) 2.4.1 4 way (4 + 12), Double door EACH 1.00 2739 2,739.29
a) 2.4.2 6 way (4 + 18), Double door EACH - 3297 -
b) 2.4.3 8 way (4 + 24), Double door EACH 2.00 4108 8,216.07
DSR 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit
14 breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
a) 2.10.1 Single pole (6/32 Amps) EACH 60.00 178 10,660.71

DSR 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
15 Each 5.00 7 35.71
required.
DSR 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB
16
complete with connections, testing and commissioning etc. as required.
a) 2.13.2 63 amps NOS. 2.00 749 1,498.21
b) 2.13.3 100 amps NOS. 1.00 935 934.82
DSR 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at
17 least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single EACH 3.00 202 605.36
red colour on front side as required.
DSR 4.1 Supplying and installing following size of perforated painted with powder coating M.S. cable
trays with perforation not more than 17.5%, in convenient sections, joined with connectors,
18
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders
etc. as required.
a) 4.1.1 100 mm width X 50 mm depth X 2 mm thickness MTR. 50.00 425 21,250.00
b) 4.1.2 150 mm width X 50 mm depth X 2 mm thickness MTR. 25.00 474 11,852.68
c) 4.1.4 300 mm width X 50 mm depth X 2 mm thickness MTR. 25.00 554 13,861.61

DSR Supplying and fixing of following sizes of medium class PVC conduit along with accessories
19 in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
a) 1.21.1 20mm MTR 100.00 75 7,500.00
b) 1.21.2 25mm MTR 100.00 80.35714 8,035.71
c) 1.21.3 32mm MTR 50.00 82.14286 4,107.14

SIDBI Tower
Repair and Renovation
Electrical Works 2
 DSR Supply, fixing, connecting and testing of Telephone/computer modular sockets modular plate
20 anodised MS box and blanking late in surface/recessed including connectionetc as
required.
a) 1.24.6+1. RJ-11 telephone socket two line with shutter
27.1+1.2 EACH 6.00 425 2,550.00
8.1
DSR Supplying drawing, connecting and testing of 0.61mm dia annealed copper conductor PVC
21 insulated PVC sheathed telephone Wire/cables in Existing PVC conduit or a racks as
required.
a) 1.18.2 2 pair Telephone cable. MTR 400.00 17.85714 7,142.86
b) 1.18.3 4 pair Telephone cable MTR - 25.89286 -
a) 1.53.1 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in theexisting surface/ recessed
MTR 300.00 43.75 13,125.00
Steel/ PVC conduit as required. 1 run of cable
DSR 1.22.1 Supplying and fixing metal box of following sizes (nominal size) on surface or in reces with
22 suitable size of phenolic laminated sheet cover in front including painting etc as required. 75 EACH 2.00 125.00 250.00
mm x 75 mm x 60 mm deep
Providing, fixing connecting and testing of solder less telephone Tag block of following
23 capacity ties as required in suitable size of m.s. hinged lockable cover box duly painted etc.
as required of Krone type.
a) M. R. 10 pair Tele Tag Blk EACH 1.00 3,500.00 3,500.00
b) M. R. 50 pair Tele Tag Blk EACH - 5,500.00 -
DSR Supply, fixing, connecting and testing of RJ-45 face plate( computer line) with shutter DN-
24 460 computer sockets modular plate anodised MS box and blanking late in surface/recessed EACH 6.00 469.00 2,814.00
including connectionetc as required.
DSR 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE
25 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the MTR 150.00 29.46 4,419.64
existing surface/ recessed steel/ PVC conduit as required.
DSR Supply, fixing, connecting and testing of TV modular sockets modular plate anodised MS
26
box and blanking late in surface/recessed including connectionetc as required.
1.24.7+1. TV antenna socket outlet
27.1+1.2 EACH 4.00 425.00 1,700.00
8.1

60,282.00 6,39,388.64 3,500.00

SUB-HEAD II - FANS & LIGHT FIXTURES:

Supply and fixing of recess/ Surface/ Pendent mountinground 15 Watt to 18 watt LED
27 1403 Down Lighter havingPowder coated die cast aluminiumhousing with heat sink, NOS. 60 1870.00 112200.00
diffuser/Reflector and driver set complete in all respect. (CAT-AAA)
Supply and fixingof recess/Surface/Pendent mountinground 10 Watt to 15 watt LED Down
28 1402 Lighter having Powder coated die cast aluminium housingwith heat sink, diffuser/Reflector NOS. 11 1350.00 14850.00
and driver set complete in all respect. (CAT-AAA)
Supply and fixingof recess/Surface/Pendent mountinground 10 Watt to 15 watt LED wall
29 MR NOS. 2 1350.00 2700.00
light set complete in all respect. (CAT-AAA)
Supply and fixingof LED Tube Lightwith batten suitablefor upto 1 X 22 watt LED Ba tten
30 1413 tube light complete includingtube etc on surface complete in all respect. (CAT - AAA) NOS. 2 1190.00 2380.00

Supply and fixingof LED Tube Lightwith batten suitablefor upto 1 X 18 watt tube light as a
31 MR Mirror Light complete includingtube etc on surface complete in all respect. (CAT-AAA) NOS. 6 324.00 1944.00

SIDBI Tower
Repair and Renovation
Electrical Works 3
 Supply & Fixing of Chandeliers 2700 K warm white Light 48 Watt LED 3700 lumen.
32 MR NOS. 2 49437.00 98874.00
Equivalent to Philips Sparkle and Shine Model No. 59083.
33 MR S & F 15 Watt up & down lighter NOS. 0 0.00 0.00
S & F of Warm White 28 Watt LED Cove Light. Equivalent to Philips LED Cove Linea Plus
34 MR NOS. 20 2284.00 45680.00
Model No. 31308
S & F of Floor Lamp along with classic design rings on stem with 23 Watt Max E 27 CFL
35 MR NOS. 5 8629.00 43145.00
lamp. Equivalent to Philips Wood Haritage Model No. 38392
Supply & Fixing of 320 Watt LED Flood Lighting Luminaire with integrated flood optics.
36 MR NOS. 16 46633.00 746128.00
Equivalent to Philips Tango G3 BVP383 LED360/CW 320W 220-240NB IN
Ceiling mount with cone diffuer Signage with 20 mtr. viewing distance with built in LED,
High efficiency L80 LED with 50,000 hour life, Usage: Exit Signage cum Emergency light
with Function Use either as an emergency luminaire or exit sign, with standalone Testing
system, Housing of Polycarbonate, Glow wire test : 850°C, RAL9003, with set of 3 exit
legends (L, R, D), Degree of protection IP42, Lum in case of emergency: 100, Operation
Mode Non -Maintained or Maintained mode selectable, Connection voltage 230V -/+ 5%
37 MR NOS. 4 6236.00 24944.00
[220V-240V] 50-60Hz, Permissible ambient: temperature +5°C to +40°C, compliant with EN
standards, with IEC CB test certificate LED, Built in Battery: Ni-Cd, Duration 3 hours,
Viewing distance 30m, Dimensions in mm: 371 x 170 x 62 including necessary accessories
as per specification, DEKRA certification mandatory, SAFELITE series SL2MNM. Approved
makes: Eaton, Ayzo, Potter

38 MR S & F Heavy Duty Exhaust/ Fresh Air Fan 450 mm Each 3 4725.00 14175.00
Supply and Installation of Air curtain,Ms-powder coated body,width 6
39 MR ",dimention(1800x230x212),single phase,Air throw 21m/s,noise level 50-55db,abs Each 2 26348.00 52696.00
blowers,Maker-Euronics
TOTAL RS. 129430.00 0.00 1030286.00

SUBHEAD - VI : EARTHING

Supply and burying of 600 mm X 600 mm X 6 mm GI Plate vertically for earthing with its
top at least 3 meter below ground level complete with 20mm dia G.I pipe and funnel for
watering and one earthing lead of one No. 8 to 10 SWG GI wire in 15 mm dia G.I pipe and
40 702 GI wire will be extra ) 30 cm square C.I frame with hinged cover masonry housing alternate Each 2 5350.00 10700.00
layers of charcoal/coke/ and salt at least 150 mm thick around etc. as per directions of
Engineer-in-charge complete in all respect s as per Drawings

Supply and burying of 600 mm X 600 mm X 3 mm copper plate vertically for earthing with
its top at least 3 meter below ground level complete with 20mm dia G.I pipe and funnel for
watering and one earthing lead of one No. 8 to 10 SWG GI wire in 15 mm dia G.I pipe and
41 704 GI wire will be extra ) 30 cm square C.I frame with hinged cover masonry housing alternate Each 1 10170.00 10170.00
layers of charcoal/coke/ and salt at least 150 mm thick around etc. as per directions of
Engineer-in-charge complete in all respect s as per Drawings

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as
42 716 Metre 50 90.00 4500.00
required complete in all respect.
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in
43 721 ground or in wall duly concealed including the cost of cement, sand, labour, Metre 50 200.00 10000.00
T&P other material required for proper completion of the work as directed at site
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as
44 718 Metre 25 1110.00 27750.00
required complete in all respect.
SIDBI Tower
Repair and Renovation
Electrical Works 4
 Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm copper strip,
45 711 on G.I. clamps on surface complete in all respects as approved by Engineer-in-charge Metre 25 510.00 12750.00

Total 0.00 75870.00 0.00

G Total 1,89,712.00 7,15,258.64 10,33,786.00

SIDBI Tower
Repair and Renovation
Electrical Works 5
PROPOSED SIDBI

Name of Work : Internal Plumbing Work for Repair Renovation at SIDBI Tower, Lucknow

DETAILED ESTIMATE

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)

SUBHEAD-I (A): SANITARY INSTALLATIONS (As per D.S.R.2016)

1 8.10 Providing & fixing stone slab table rubbed, edges rounded and polished of
size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting
chase of appropriate width with chase cutter and embedding the stone in
chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2
coarse sand : 4 graded stone aggregste 6mm nominal size) as per
Engineer-in-charge and finished smooth

8.10.1 White Agaria Marble Stone sqm 1 2,831.95 2,831.95

2 17.10 Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS: 13983 with CI brackets and stainless steel waste with plug 40mm
including painting of fittings and brackets, cutting and making good the
walls wherever required.
17.10.1 Kitchen sink with drain board
17.10.1.3 510X1040mm bowl depth 200mm. Each 1 3,772.35 3772.35
17.10.2 Sink without drain board
17.10.2.1 610X510 mm bowl depth 200mm. Each 0 2,476.60 0

3 17.32 Providing and fixing mirror of superior glass (of approved quality) and of
required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :
17.32.1 Rectangular shape 453x357 mm Each 3 752.80 2,258.40

4 17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass Each 5 385.35 1,926.75

TOTAL C/F TO SUMMARY 10,789.45

SIDBI Tower
Renovation Work
Plumbing Works Page...2
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)

SUBHEAD-I (B) : SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)

Note : The sanitaryware and CP fittings may change as per internal layout
and architect consent. Out of ROCA/TOTO/Kohler ; we have selected
kohler models for tentative estimate.

5 MR Providing and Fixing of vitreous china single trap syphonic pattern having
back inlet, supporting chair wall hung water closet withflush valve and CP
brass flush bend (European type) Wall Hung water closet with seat and
lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed
to W.C., C.P. brass screwed washers including cutting and making good
the walls and floors wherever required and HDPE wc pan connector
including jointing with white cement coomplete in all respects. (Make -
Roca Model Victoria Cat. No.: Rs346303460 and Seat cover
RE80P397461)

Each 5 10,256.45 51,282.25

6 MR Providing and Fixing of low noise Concealed cistern, mounting module for
brick work with actuation plate with water saving: delayed filling process
saves appr. 0,5 l/flush ; Dual Flush - 3 litre and 6 Litre (Model no . 03 064
00 99 (Concealed cistern ) and 03 068 06 99 (Actualtion plate -Chrome
finish) Make - Schell) Each 5 7,850.98 39,254.90

7 MR Providing and fixing of ABS health spary which can tolerate water
pressure up to 6 bar flow pressure with metal hose and holder in
Polished Chrome ; (Model no. 03 295 06 99 Make - Schell ) Each 5 2,085.80 10,429.00

8 MR Providing and fixing CP Bottle Trap for basin, sink and urinal. (Make -
Roca Model Cat. No.:RF9066A1) Each 7 1,930.51 13,513.57

9 MR Supplying & Fixing of CP soap dish Holder fixed to the wall with PVC
rubber plug with CP brass screws (Make - Roca Model Cat. No.:
RA816070132) or equivalent make Each 5 1,574.30 7,871.50

10 MR Providing and fixing Towel ring (Make: Roca, Model :Cat No-
RA816070172) with brackets fixed to wooden cleats with C.P. brass
screws. Each 3 1,961.50 5,884.50

11 MR Providing and fixing of stainless steel braided flexible hoses with inliner
EPDM Which can bear the maximum pressure of 10 bar and maximum
temperature of 90 degree Celsius with bending radius of 25 r with length
500 mm with Union nut connection of 1/2" (Model no. 10 224 06 99 of
Schell ) Each 21 469.25 9,854.25

12 MR Providing and fixing C.P. brass15mm dia bib cock of approved quality
confirming ( (Make: Roca, Model - RT5A7825CA1) Each 5 1,901.62 9,508.10

13 MR Providing and fixing C.P. brassCold-only wall-mount kitchen & lab sink
faucet in polished chrome(Make:Roca, Model - RT5A7625C00)
Each 1 6,988.25 6,988.25

14 MR Providing and fixing of Regulating Angle valve with Comfort handle, with
extended push rod, push rosette Ø 54 mm ; Material – Brass DIN EN /
Noise Class I ; Connection: 1/2“/DN 15, Outlet: 1/2“/DN 15 ; Chrome /
Weight 0.130 KG per piece ( Model no. 05 217 06 99 Make Schell )
Each 21 551.37 11,578.77

SIDBI Tower
Renovation Work
Plumbing Works Page...3
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)

15 MR Providing and fixing white color vitreous China flat back, Rectangular
under counter wash basin with R.S. or CI bracket and 32 mm dia outlet,
with brass C.P. wall cap and extension pieces, 15 mm dia C.P. brass angle
stop cock with 10mm dia C.P. brass connection pipe etc. CP brass chain,
CP wall flange, rubber adopter for waste connection complete, CP brass
chain CP waste and CP pipe to wall with CP wall flange and rubber
adopter for waste connection complete, with pedestal of matching model
below wash basin, including cutting and making good the walls wherever
required. [Make - Roca, Model RS327115410]
Each 5 7,588.05 37,940.25

16 MR Providing and fixing of self-closing wash basin tap high pressure cold and
pre-mixed water with a plastic cartridge ; manual actuation and
automatic closing action should Comprises: mounting accessories for
single-hole installation and with technical data: as fl ow volume 6,0 l/min
; fl ow pressure: 1 to 5 bar ; fl ow time: approx. 7 s Material: Housing
material: brass DIN EN (Model no. 02 122 06 99 of Schell )
Each 5 6,594.93 32,974.65

17 MR Providing and fixing urinals with siphon and concealed C.I. brackets,
brass C.P. supply and flushing connections with 1 N0. 15 mm Dia. Brass
C.P. angle type stop cock with brass C.P. wall cap, with C.P. waste
coupling with C.P. wall caps brass CP cones at inlet and outlets concealed
lead pipes drains form bottle trap drain pipes in floor. Joining etc
complete. (Make: Roca, RS35945H000)

Each 2 21,162.62 42,325.24

18 MR Providing and Fixing of low noise Urinal flush valve touch-free infrared
flushing device Mains Operated 230 V / 50 Hz with internal isolating
valve. Which includes roughing in set for electronic actuation and Urinal
Control finishing set. Roughing in set should comprises - plastic
construction casing with cleaning cover ; pre-assembled water path with
isolating valve ; sealing plug ; cleaning cover ; with Flow pressure: 0,8 - 5
bar ; • flush volume: 0,3 l/s ; 230 V 50 Hz power supply unit with mains
plug • fitting connection G 1/2" (DN 15) external thread; Connection: G
1/2" ext. thread/ DN 15, and Urinal Control finishing set should
comprises mounting frame with electronic module ; front panel with
sensor ; cartridge solenoid valve with pre-filer ; diagnostic lamps ;
adjustment range; with technical data as flushing time: 2-15 s
adjustable; vandal-proof design and Material: front cover out of ABS
Plastic ; (Model No. 01 193 00 99 with 02 808 06 99 of Schell )

Each 2 19,204.17 38,408.34

19 MR Providing and fixing Hand dryer with C.P brackets with C.P brass screws
and PVC rawl plugs complete in all respects including cutting and making
good the wall where required. (EH 27NW Hand Dryer, Make: Euronics) -
For Consultant Room Each 3 16,835.87 50,507.61

20 Supply, installation, testing and commissioning of horizontal type storage

hot water heater within-built pressure relief valve, rated for inlet water
pressure upto 6 bar complet in all respects including inlet, oulet
connections, fixing bolts etc. and testing complete. [Make: AO Smith or
Racold]
Capacity 15 litres Each 3 8,950.00 26,850.00

TOTAL C/F TO SUMMARY 3,95,171.18

SIDBI Tower
Renovation Work
Plumbing Works Page...4
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)
SUBHEAD-II(A): INTERNAL DRAINAGE INSTALLATIONS (As per D.S.R.2016)

Providing and fixing cast iron trap of self cleansing design with cast iron
screwed down or hinged grating with or without vent arm complete,
1 17.60.
including cost of cutting and making good the walls and floors.

100 mm inlet and 100 mm outlet Hubless centrifugally cast iron pipes
17.60.1.3 Each 6.00 677.60 4065.60
epoxy coated inside & outside IS : 15905

100 mm inlet and 75 mm outlet Hubless centrifugally cast iron pipes

17.60.2.3 Each 2.00 496.40 992.80
epoxy coated inside & outside IS : 15905

2 17.35 Providing and fixing soil, waste, vent and rain water pipes
100mm dia
Hubless centrifugally cast iron pipes epoxy coated inside & outside IS :
17.35.1.3 metre 55.00 925.55 50905.25
15905

Providing and fixing MS holder bat clamps of approved design to cast iron
(spun) pipe embedded in and Including cement concrete blocks 10 x10
3 17.37 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20mm nominal size) including cost of cutting holes and making good the
walls etc.
17.37.1 For 100mm dia. Pipe Each 4.00 167.35 669.40

Providing and fixing bend of required degree with access door, insertion
4 17.38
rubber washer 3mm thick, bolts and nuts complete.
17.38.1 100mm
Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905
17.38.1.3 Each 6.00 489.45 2936.70

5 17.39 Providing and fixing plain bend of required degree.

17.39.1 100mm dia
Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905
17.39.1.3 Each 14.00 307.10 4299.40

Providing and fixing double equal plain junction of required degree.

6 17.42
17.42.1 100x100x100x100 mm
Hubless centrifugally cast iron pipes epoxy coated inside & outside IS :
17.42.1.3 Each 5.00 645.10 3225.50
15905

Providing and fixing single equal plain junction of required degree :

7 17.44
17.44.1 100X100X100mm
Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905
17.44.1.3 Each 5.00 503.40 2517.00

Providing and fixing single unequal plain junction of required degree

8 17.48
17.48.1 100x 100x75 mm
Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905
17.48.1.3 Each 5.00 482.45 2412.25

Providing and fixing Hubless cast iron offsets epoxy coated inside &
9 17.54.A
outside as per IS : 15905
17.54A.1 130 mm offsets
17.54A.1.1 With 100 mm dia Each 5.00 557.95 2789.75

10 17.56 Providing and fixing terminal guard:

17.56.1 100mm
Hubless centrifugally cast iron epoxy coated inside & outside IS : 15905
17.56.1.3 Each 2.00 355.85 711.70

SIDBI Tower
Renovation Work
Plumbing Works Page...5
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)

Providing and fixing shielded coupling for Hubless centrifugally cast iron
11 17.57A
pipe
17.57A.1 100mm
17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 57.00 360.50 20548.50

12 18.58 Providing and fixing PTMT grating of approved quality and colour
18.58.1 Circular type
18.58.1.2 125 mm nominal dia Each 8.00 45.55 364.40

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10

13 AS PER 19.2 graded stone aggregate 40 mm nominal size) alround CI HUBLESS
including bed concrete as per standard design
Note: This work shall be done all-round PIPE AT ground floor's toilet.

19.2.1 100mm diameter metre 45.00 622.95 28032.75

DSR Item Providing and fixing G.I. pipes complete with GI fittings and clamps
14 18.10 including cutting and making good the walls etc. (internal work)

18.10.5 40 mm dia, nominal bore Rm 11.50 425.65 4894.98

18.10.6 50 mm dia, nominal bore Rm 4.60 472.40 2173.04

DSR Item Painting with synthetic enamel paint of approved drand and manufacture
15
13.61 to give an even shade
13.61.1 Two more coast on new work sqm 11.00 78.40 862.40

16 7760 P/F M.S. cap 100 mm dia Each 2.00 150.00 300.00

TOTAL C/F TO SUMMARY 1,32,701.42

SIDBI Tower
Renovation Work
Plumbing Works Page...6
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)
SUBHEAD-III(A): WATER SUPPLY INSTALLATIONS (As per D.S.R.2016)

1 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling

of approved municipal design. Each 0 38.50 -

2 18.7 Providing and fixing CPVC pipes having thermal stability for hot and cold
water supply including all CPVC plain and brass threaded fittings including
fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of
pipes and fittings with one step CPVC solvent cement and testing of joints
complete as per direction of engineer in charge.

Internal work -Exposed on Wall

18.7.1 15 mm nominal outer dia pipes Rm 11 142.95 1,572.45
18.7.2 20 mm nominal outer dia pipes Rm 20 179.95 3,563.01
18.7.3 25 mm nominal outer dia pipes Rm 45 216.20 9,703.06
18.7.4 32 mm nominal outer dia pipes Rm 40 289.05 11,446.38
18.7.5 40 mm nominal outer dia pipes Rm 33 385.50 12,721.50
18.7.6 50 mm nominal outer dia pipes Rm 22 548.55 12,068.10

3 18.8 Providing and fixing CPVC pipes having thermal stability for hot and cold
water supply including all CPVC plain and brass threaded fittings including
fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of
pipes and fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the wall same including testing of joints
complete as per the direction of engineer incharge

concealed work including cutting chases and making good the wall etc.

18.8.1 15 mm nominal outer dia pipes Rm 110 246.20 27,082.00

18.8.2 20 mm nominal outer dia pipes Rm 11 284.85 3,133.35

5 DSR Item Painting with synthetic enamel paint of approved drand and manufacture
13.61 to give an even shade
13.61.1 Two more coast on new work sqm 15 78.40 1,176.00

SIDBI Tower
Renovation Work
Plumbing Works Page...7
PROPOSED SIDBI

S. NO. (DSR-2016) QTY. RATE AMOUNT

DESCRIPTION UNIT
Item NO Total (in words) (IN RS.)
6 18.17 Providing and fixing of gun metal gate valve with CI wheel of approved
quality (screwed ends)
18.17.1 25mm dia, nominal bore Each 2.00 428.20 856.40
18.17.2 32 mm dia, nominal bore Each 1.00 500.75 500.75
18.17.3 40 mm dia, nominal bore Each 1.00 584.70 584.70
18.17.4 50 mm dia, nominal bore Each 1.00 749.90 749.90

8.0 18.16 Providing and fixing brass stop cock of approved quality
18.16.1 15mm nominal bore Each 2 260.00 520.00
18.16.2 20mm nominal bore Each 6 280.00 1,680.00

9.0 10.2 Structual steel work welded in built up sections, trusses and framed work
including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete. kg 15 67.60 1,014.00

TOTAL C/F TO SUMMARY 88,371.60

SUBHEAD-III (B) : WATER SUPPLY- INTERNAL WORK (NON-SCHEDULED ITEMS)

13 Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat
MR
complete (PN-16). (Make: Zoloto/Giacomini/Sant)
15 mm dia nominal bore Each 2 394.20 788.40
20 mm dia nominal bore Each 4 533.58 2134.32
25 mm dia nominal bore Each 4 814.66 3258.64

TOTAL C/F TO SUMMARY 6,181.36

SIDBI Tower
Renovation Work
Plumbing Works Page...8