Page 1 of 54
Test Report issued under the responsibility of:
NCB TÜV SÜD PSB
1 Science Park Drive, 118221 Singapore
Singapore
TEST REPORT
IEC 60598-2-1
Luminaires
Part 2: Particular requirements
Section 1: Fixed general purpose luminaires
Report Number. .............................. : 083-1606104-100
Date of issue ................................... : 2016-03-14
Total number of pages.................... 54 pages
Name of Testing Laboratory TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai
preparing the Report...................... : Branch
Applicant’s name ........................... : Philips Lighting (China) Investment Co., Ltd
Address ........................................... : Building No. 9, Lane 888, Tianlin Road, Minhang District, 200233,
Shanghai, People's Republic of China
Test specification:
Standard .......................................... : IEC 60598-2-1:1979 (First Edition) + A1:1987 used in conjunction
with IEC 60598-1:2014 (Eighth Edition)
Test procedure ............................... : CB Scheme
Non-standard test method ............ : N/A
Test Report Form No. .................... : IEC60598_2_1D
Test Report Form(s) Originator .... : Intertek Semko AB
Master TRF ...................................... : 2014-08
Copyright © 2014 IEC System of Conformity Assessment Schemes for Electrotechnical
Equipment and Components (IECEE System). All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the
IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for
and will not assume liability for damages resulting from the reader's interpretation of the reproduced
material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the
CB Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.
Page 3 of 54 Report No.: 083-1606104-100
SMT/CTF Stage 3 or 4:
Testing location/ address ............................. : N/A
Tested by (name, function, signature) ........ : N/A
Witnessed by (name, function, signature) . : N/A
Approved by (name, function, signature) ... : N/A
Supervised by (name, function, signature) : N/A
TRF No. IEC60598_2_1D
Page 4 of 54 Report No.: 083-1606104-100
List of Attachments (including a total number of pages in each attachment):
083-1606104-100 attachment 1 for the additional requirements of IEC 62471:2006.
083-1606104-100 attachment 2 for the additional requirements of IEC 62493:2009.
Summary of testing:
Determination of the test result includes consideration of measurement uncertainty from the test
equipment and methods.
Representative sample covered by this report has been tested and complies with the applicable
requirements of this standard.
All applicable hazards are covered by the harmonized standard.
Tests performed (name of test and test Testing location:
clause):
TÜV SÜD Certification and Testing (China) Co.,
Complete tests are performed on Ltd. Shanghai Branch
BY698P LED300/NW PSU ENB EN,
BY698P LED200/NW PSD WB EN, No. 1999, Duhui Road, Shanghai, 201108, P. R.
BY698P LED300/CW PSD ENB L3000 EN China
Construction check on other models
Requirement of IEC 62031 have been evaluated
and found to be met by testing.
The test results comply with the requirements
Summary of compliance with National Differences:
List of countries addressed
N/A
TRF No. IEC60598_2_1D
Page 5 of 54 Report No.: 083-1606104-100
Copy of marking plate:
Note 1: Height of letter and numeral not less than 2mm, graphical symbol not less than 5mm, WEEE not
less than 7mm.
Note 2: The labels of other types are similar with the above, just the different model name and
specification.
The above label are drafts of an artwork for marking plate pending approval by National Certification
Bodies and it shall not be affixed to products prior to such an approval.
Test item particulars .................................................. : Fixed general purpose luminaires (LED Highbay)
Classification of installation and use ...................... : Class I
Supply Connection .................................................... : Connecting leads or connector
...................................................................................... :
Possible test case verdicts:
- test case does not apply to the test object .......... : N/A
- test object does meet the requirement ................. : P (Pass)
- test object does not meet the requirement .......... : F (Fail)
Testing ......................................................................... :
Date of receipt of test item ........................................ : 2016-01-08
Date (s) of performance of tests .............................. : 2016-01-08 to 2016-03-14
General remarks:
TRF No. IEC60598_2_1D
