Conforms to USDOL OSHA 29CFR 1910.

1200 HAZCOM

SAFETY DATA SHEET

Professional Easy-Off Oven and Grill Cleaner

1. Product and company identification

Product name : Professional Easy-Off Oven and Grill Cleaner

Distributed by : Reckitt Benckiser LLC.

Morris Corporate Center IV
399 Interpace Parkway (P.O. Box 225)
Parsippany, New Jersey 07054-0225
+1 973 404 2600

Emergency telephone : 1-800-338-6167

number (Medical)
Emergency telephone : 1-800-424-9300 (U.S. & Canada) CHEMTREC
number (Transport) Outside U.S. and Canada (North America), call Chemtrec:703-527-3887
Website: : http://www.rbnainfo.com

Product use : Oven Cleaner

Professional use
This SDS is designed for workplace employees, emergency personnel and for other conditions and situations
where there is greater potential for large-scale or prolonged exposure, in accordance with the requirements of
USDOL Occupational Safety and Health Administration.

This SDS is not applicable for consumer use of our products. For consumer use, all precautionary and first aid
language is provided on the product label in accordance with the applicable government regulations, and shown
in Section 15 of this SDS.

SDS # : 358467PSDS v4.0

Formulation #: : 1671-159 (358467 v3.0)
UPC Code / Sizes : 62338-80689-1 (64 fl. oz. HDPE Bottle)

2. Hazards identification
Classification of the : CORROSIVE TO METALS - Category 1
substance or mixture SKIN CORROSION/IRRITATION - Category 1
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1

GHS label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : May be corrosive to metals.
Causes severe skin burns and eye damage.

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 1/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

2. Hazards identification
Precautionary statements
General : Read label before use. Keep out of reach of children. If medical advice is needed,
have product container or label at hand.
Prevention : Wear protective gloves. Wear eye or face protection: Recommended: safety glasses
with side-shields. Wear protective clothing. Keep only in original container. Wash
hands thoroughly after handling.
Response : Absorb spillage to prevent material damage. IF INHALED: Remove victim to fresh air
and keep at rest in a position comfortable for breathing. Immediately call a POISON
CENTER or physician. IF SWALLOWED: Immediately call a POISON CENTER or
physician. Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with water or shower. Wash
contaminated clothing before reuse. Immediately call a POISON CENTER or physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Immediately call a POISON CENTER or
physician.
Storage : Store locked up. Store in a corrosion resistant container with a resistant inner liner.
Disposal : Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Supplemental label : None known.
elements
Hazards not otherwise : None known.
classified

3. Composition/information on ingredients
Substance/mixture : Mixture
Ingredient name % CAS number
potassium hydroxide 2.5 - 5 1310-58-3
disodium metasilicate 1 - 2.5 6834-92-0
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.

4. First aid measures

Description of necessary first aid measures
Eye contact : Get medical attention immediately. Call a poison center or physician. Immediately flush
eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and
remove any contact lenses. Continue to rinse for at least 10 minutes. Chemical burns
must be treated promptly by a physician.
Inhalation : Get medical attention immediately. Call a poison center or physician. Remove victim to
fresh air and keep at rest in a position comfortable for breathing. If it is suspected that
fumes are still present, the rescuer should wear an appropriate mask or self-contained
breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest
occurs, provide artificial respiration or oxygen by trained personnel. It may be
dangerous to the person providing aid to give mouth-to-mouth resuscitation. If
unconscious, place in recovery position and get medical attention immediately. Maintain
an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 2/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

4. First aid measures

Skin contact : Get medical attention immediately. Call a poison center or physician. Flush
contaminated skin with plenty of water. Remove contaminated clothing and shoes.
Wash contaminated clothing thoroughly with water before removing it, or wear gloves.
Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a
physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion : Get medical attention immediately. Call a poison center or physician. Wash out mouth
with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a
position comfortable for breathing. If material has been swallowed and the exposed
person is conscious, give small quantities of water to drink. Stop if the exposed person
feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do
so by medical personnel. If vomiting occurs, the head should be kept low so that vomit
does not enter the lungs. Chemical burns must be treated promptly by a physician.
Never give anything by mouth to an unconscious person. If unconscious, place in
recovery position and get medical attention immediately. Maintain an open airway.
Loosen tight clothing such as a collar, tie, belt or waistband.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : May give off gas, vapor or dust that is very irritating or corrosive to the respiratory
system.
Skin contact : Causes severe burns.
Ingestion : May cause burns to mouth, throat and stomach.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water
before removing it, or wear gloves.

See toxicological information (Section 11)

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 3/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

5. Fire-fighting measures
Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
metal oxide/oxides

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Do not breathe vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Absorb spillage to prevent material
damage. Dispose of via a licensed waste disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Absorb spillage to prevent
material damage. Approach release from upwind. Prevent entry into sewers, water
courses, basements or confined areas. Wash spillages into an effluent treatment plant
or proceed as follows. Contain and collect spillage with non-combustible, absorbent
material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for
disposal according to local regulations (see Section 13). Dispose of via a licensed
waste disposal contractor. Contaminated absorbent material may pose the same
hazard as the spilled product. Note: see Section 1 for emergency contact information
and Section 13 for waste disposal.

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 4/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not get in eyes or
on skin or clothing. Do not breathe vapor or mist. Do not ingest. If during normal use
the material presents a respiratory hazard, use only with adequate ventilation or wear
appropriate respirator. Keep in the original container or an approved alternative made
from a compatible material, kept tightly closed when not in use. Keep away from acids.
Empty containers retain product residue and can be hazardous. Do not reuse container.
Absorb spillage to prevent material damage.

Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected from
including any direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
incompatibilities (see Section 10) and food and drink. Store in a corrosion resistant container with a
resistant inner liner. Store locked up. Separate from acids. Keep container tightly
closed and sealed until ready for use. Containers that have been opened must be
carefully resealed and kept upright to prevent leakage. Do not store in unlabeled
containers. Use appropriate containment to avoid environmental contamination.

8. Exposure controls/personal protection

Control
Occupational exposure limits
Ingredient name Exposure limits
potassium hydroxide ACGIH TLV (United States, 4/2014).
C: 2 mg/m³
OSHA PEL 1989 (United States, 3/1989).
CEIL: 2 mg/m³
NIOSH REL (United States, 10/2013).
TWA: 2 mg/m³ 10 hours.
Appropriate engineering : If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,
controls local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles and/
or face shield. If inhalation hazards exist, a full-face respirator may be required instead.
Recommended: safety glasses with side-shields
Skin protection

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 5/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

8. Exposure controls/personal protection

Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.

9. Physical and chemical properties

Appearance
Physical state : Liquid. [Translucent Viscous liquid.]
Color : Colorless.

Odor : Ether-like.
Odor threshold : Not available.
pH : 14 [Conc. (% w/w): 100%]
Melting point : Not available.
Boiling point : 100°C (212°F)
Flash point : Closed cup: >93.3°C (>199.9°F) [Product does not sustain combustion.]
Evaporation rate : Not available.
Flammability (solid, gas) : Not available.
Lower and upper explosive : Not available.
(flammable) limits
Vapor pressure : Not available.
Vapor density : Not available.
Relative density : 1.05 to 1.08
Solubility : Easily soluble in the following materials: cold water and hot water.
Partition coefficient: n- : Not available.
octanol/water
Auto-ignition temperature : Not available.
Decomposition temperature : Not available.
Viscosity : Dynamic (room temperature): 300 mPa·s (300 cP)
Flow time (ISO 2431) : Not available.
Aerosol product

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 6/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Chemical stability : The product is stable.
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions
Conditions to avoid : Keep away from extreme heat. Protect from moisture.
Incompatible materials : Reactive or incompatible with the following materials:
acids
metals
Do not mix with household chemicals.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
products not be produced.

11. Toxicological information

Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
potassium hydroxide LD50 Oral Rat 273 mg/kg -
disodium metasilicate LD50 Oral Rat 1153 mg/kg -
Conclusion/Summary : Based on available data, the classification criteria are not met.

Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
potassium hydroxide Eyes - Moderate irritant Rabbit - 24 hours 1 -
milligrams
Skin - Severe irritant Guinea pig - 24 hours 50 -
milligrams
Skin - Severe irritant Human - 24 hours 50 -
milligrams
Skin - Severe irritant Rabbit - 24 hours 50 -
milligrams
disodium metasilicate Skin - Moderate irritant Guinea pig - 24 hours 250 -
milligrams
Skin - Severe irritant Human - 24 hours 250 -
milligrams
Skin - Severe irritant Rabbit - 24 hours 250 -
milligrams
Conclusion/Summary
Skin : Extreme pH: Causes burns.
Eyes : Extreme pH: Causes serious eye damage.
Respiratory : Based on available data, the classification criteria are not met.
Sensitization
Not available.
Conclusion/Summary
Skin : Based on available data, the classification criteria are not met.
Respiratory : Based on available data, the classification criteria are not met.
Mutagenicity

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 7/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

11. Toxicological information

Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Carcinogenicity
Not available.

Conclusion/Summary : Based on available data, the classification criteria are not met.
Reproductive toxicity
Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Teratogenicity
Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.

Specific target organ toxicity (single exposure)

Not available.

Specific target organ toxicity (repeated exposure)

Not available.

Aspiration hazard
Not available.

Information on the likely : Not available.

routes of exposure
Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : May give off gas, vapor or dust that is very irritating or corrosive to the respiratory
system.
Skin contact : Causes severe burns.
Ingestion : May cause burns to mouth, throat and stomach.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains

Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 8/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

11. Toxicological information

Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

Numerical measures of toxicity

Acute toxicity estimates
Route ATE value
Oral 4826.3 mg/kg

12. Ecological information

Toxicity
Product/ingredient name Result Species Exposure
potassium hydroxide Acute LC50 80 ppm Fresh water Fish - Gambusia affinis - Adult 96 hours
disodium metasilicate Acute EC50 33.53 mg/l Fresh water Crustaceans - Ceriodaphnia 48 hours
dubia - Neonate
Acute LC50 2320 ppm Fresh water Fish - Gambusia affinis - Adult 96 hours
Chronic NOEC 160 mg/l Fresh water Algae - Pseudokirchneriella 72 hours
subcapitata

Persistence and degradability

Not available.

Bioaccumulative potential
Not available.

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 9/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

12. Ecological information

Other adverse effects : No known significant effects or critical hazards.
Release of large quantities into water may cause a pH-change resulting
in danger for aquatic life.
13. Disposal considerations
Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.

14. Transport information

Regulatory UN number Proper shipping Classes PG* Label Additional
information name information
DOT Classification UN3266 Corrosive liquid, 8 II See DG List.
basic, inorganic, n.o.s.
(potassium hydroxide,
disodium metasilicate)
RQ (potassium
hydroxide)
TDG Classification UN3266 CORROSIVE LIQUID, 8 II See DG List.
BASIC, INORGANIC,
N.O.S. (potassium
hydroxide, disodium
metasilicate)
Mexico UN3266 LIQUIDO 8 II See DG List.
Classification CORROSIVO,
BASICO,
INORGANICO, N.E.P.
(potassium hydroxide,
disodium metasilicate)
IMDG Class UN3266 CORROSIVE LIQUID, 8 II See DG List.
BASIC, INORGANIC,
N.O.S. (potassium
hydroxide, disodium
metasilicate)
IATA-DGR Class UN3266 Corrosive liquid, 8 II See DG List.
basic, inorganic, n.o.s.
(potassium hydroxide,
disodium metasilicate)

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 10/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

14. Transport information

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.

PG* : Packing group

15. Regulatory information

U.S. Federal regulations : TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): Not determined.
Clean Water Act (CWA) 311: potassium hydroxide

Clean Air Act Section 112 : Not listed

(b) Hazardous Air
Pollutants (HAPs)
Clean Air Act Section 602 : Not listed
Class I Substances
Clean Air Act Section 602 : Not listed
Class II Substances
DEA List I Chemicals : Not listed
(Precursor Chemicals)
DEA List II Chemicals : Not listed
(Essential Chemicals)
SARA 302/304
Composition/information on ingredients
No products were found.
SARA 304 RQ : Not applicable.
SARA 311/312
Classification : Reactive
Immediate (acute) health hazard
Composition/information on ingredients
Name % Fire Sudden Reactive Immediate Delayed
hazard release of (acute) (chronic)
pressure health health
hazard hazard
potassium hydroxide 2.5 - 5 No. No. No. Yes. No.
disodium metasilicate 1 - 2.5 No. No. No. Yes. No.

State regulations
Massachusetts : The following components are listed: POTASSIUM HYDROXIDE
New York : The following components are listed: Potassium hydroxide
New Jersey : The following components are listed: POTASSIUM HYDROXIDE; CAUSTIC POTASH
Pennsylvania : The following components are listed: POTASSIUM HYDROXIDE (K(OH))

Canada

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 11/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

15. Regulatory information

WHMIS (Canada) : Class D-1B: Material causing immediate and serious toxic effects (Toxic).
Class E: Corrosive material
Canadian lists
Canadian NPRI : None of the components are listed.
CEPA Toxic substances : None of the components are listed.
Canada inventory : Not determined.

Label elements
Signal word : DANGER: CORROSIVE
Hazard statements : CAUSES EYE AND SKIN BURNS. Harmful if swallowed.
Precautionary measures : Keep out of the reach of children. Contains potassium hydroxide. Do not swallow. Do
not get in eyes or on skin or clothing. Wear protective gloves and eye protection. Avoid
breathing spray. Use only in a well-ventilated area. Do not mix with household
chemicals. Keep from freezing.

16. Other information

Hazardous Material :
Information System (U.S.A.)
Health 3

Flammability 0
Physical hazards 0

Personal protection D

Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
National Fire Protection :
Association (U.S.A.)

0 Flammability
Health 3 0 Instability/Reactivity
COR

Special

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not
the complete and official position of the National Fire Protection Association, on the referenced subject which is
represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be
interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA
49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,
anyone using the 704 systems to classify chemicals does so at their own risk.

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 12/13

(358467PSDS)
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

358467PSDS v4.0

16. Other information

Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations

Date of issue : 16/03/2017

Date of previous issue : 12/05/2015.
Version : 4
Prepared by : Reckitt Benckiser LLC.
Product Safety Department
1 Philips Parkway
Montvale, New Jersey 07646-1810 USA.
FAX: 201-476-7770

Revision comments : Correction on Section 14 (Replaced Limited Quantity label with Corrosive label).
Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.

RB is a member of the CSPA Product Care Product Stewardship Program.

Code # : FF358467 SDS # : 358467PSDS v4.0 Date of issue : 16/03/2017 13/13

(358467PSDS)