# DO NOT EDIT THIS LINE. FILE_TYPE=CONFIGURATION_FILE VERSION=9.1.
##############################################################################
# SERVICIOS BASE ADVA FSP 150CC-GE114Pro Access Port Configuration
#
# Base Configuration to talk to the Network ver GA_22032018
# En caso de errores comunicarse con DL-LATAM.CRUD@Level3.com
#
##############################################################################
# DO NOT EDIT THIS LINE. FILE_TYPE=CONFIGURATION_FILE VERSION=9.1.1
#
#CLI:SUBNETWORK Edit
#
home
configure system
prompt "NID081111"
#
#CLI:MANAGEMENT TUNNEL-1 Delete
#
home
configure communication
delete mgmttnl mgmt_tnl-1
#
#CLI:SYSTEM Edit
#
home
configure system
system-tod-type ntp
http disabled
telnet disabled
security-banner "This is the Level 3 device NID081111\\nThis equipment is the
property of Level 3 Communications. \\nUnauthorized access is strictly prohibited.
Any unauthorized\\naccess or tampering with this equipment will result in
civil\\nand/or criminal prosecution.\\n
\\n"
long-if-alias enabled
ntp-client
primary-server ipv4 10.226.179.1
backup-server ipv4 10.85.34.107
control enabled
back
alarm-attributes access-port sfp-non-qualified nsa nr
alarm-attributes network-port sfp-non-qualified nsa nr
alarm-attributes dcn-port lnkdn sa nr
alarm-attributes system snmp-dg-host-unreachable nsa nr
syslog-server 1
configure ipv4-address 200.55.62.145 514
back
syslog-server 2
configure ipv4-address 200.55.62.184 514
back
audit-log
syslog-control enabled
back
security-log
syslog-control enabled
back
alarm-log
syslog-control enabled
#
#CLI:SECURITY SYSTEM Edit
#
home
configure user-security
security-strength medium
add gfs GfsL3v3l3 GfsL3v3l3 maintenance
add operations OPSL3v3l3 OPSL3v3l3 superuser
config-user root password ChgMeNOW RaizL3v3l3 RaizL3v3l3
delete user
delete netadmin
access-order local
auth-protocol radius
nas-ip-address 99.99.99.99
tacacs-privilege-control disabled
tacacs-user-privilege retrieve
config-rap 1
ip-address 10.85.34.107
port 1645
timeout 10
retries 3
control enabled
secret 4jfg1rdM
back
config-rap 2
ip-address 10.85.88.94
port 1645
timeout 10
retries 3
control enabled
secret 4jfg1rdM
#
#CLI:NE-1 Edit
#
home
network-element ne-1
name "NID081111"
contact "YOYO_COMBEIMA"
location "Metro 2"
#
#CLI:NTE114PRO-1-1-1 Edit
#
home
network-element ne-1
configure nte nte114pro-1-1-1
alias "NID081111"
snmp-dying-gasp enabled
#
#CLI:SYSTEM FEATURE-1 Edit
#
home
admin sw-license
configure feature "EoMPLS" enabled
#
#CLI:SYSTEM FEATURE-2 Edit
#
home
admin sw-license
configure feature IP-Services-and-ACL-Filtering enabled
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
network-element ne-1
configure nte nte114pro-1-1-1
configure network-port network-1-1-1-1
alias "RFS:6000064032"
auto-diagnostic disabled
media fiber 1000-full
qinq-ethertype 8100
efm-oam
oam-control disabled
#
#CLI:MANAGEMENT TUNNEL-1 Create
#
home
configure communication
add mgmttunnel 1 "ADVA" network-1-1-1-1 ethernet vlan-based ipv4-only enabled
505 disabled 64000 768000
configure mgmttnl mgmt_tnl-1
dhcp-control disabled 10.226.179.26 255.255.255.0
dhcp-client-id-control disabled
#
#CLI:IP SYSTEM Edit
#
home
configure communication
configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
#
#CLI:IP SOURCE ADDR CONFIG Edit
#
home
configure communication
configure src-addr sys-ip-addr "ADVA" "ADVA"
#
#CLI:CFM MD-1 Create
#
home
configure cfm
add md 1 no-name 5 none
#
#CLI:CFM MANET-1-1 Create
#
home
configure cfm
configure md md-1
add manet 1 icc-based "CBLM_METRO" 1sec 1,2
#
#CLI:CFM MACOMP-1-1-1 Create
#
home
configure cfm
configure md md-1
configure manet manet-1-1
add macomp 1 network-1-1-1-1 506 defer
add mep 1 down network-1-1-1-1 disable mac-remote-xcon-error enabled 0
configure mep mep-1-1-1
ltm-egress-id "00000080ea7a38d0"
#
#CLI:CFM A2N VID SHAPER-1-1-1-1-1 Edit
#
home
configure cfm
configure cfm-a2n-vid-shaper network-1-1-1-1 cfm_a2n_vid_shaper-1-1-1-1-1
cir 64000
admin-state in-service
#
#CLI:IP SYSTEM Create
#
home
configure communication
add ip-route nexthop 0.0.0.0 0.0.0.0 10.226.179.1 "ADVA" 1 disabled
home
#
#CLI:SNMP COMMUNITY ENTRY Delete
#
home
configure snmp
delete community "private"
#
#CLI:SNMP COMMUNITY ENTRY Delete
#
home
configure snmp
delete community "public"
#
#CLI:SNMP COMMUNITY ENTRY Create
#
home
configure snmp
add community "L3v3l3" readonly
add community "L3v3l32" readonly
# Teoco_NM
add community H3lix_L8a8m readonly
#
#CLI:SNMP TARGETPARAMS ENTRY Create
#
home
configure snmp
add target-params "traphost" snmpv2c snmpv2c "L3v3l3" no-auth
# Teoco_NM
add target-params Helixhost snmpv2c snmpv2c H3lix_L8a8m no-auth
#
#CLI:SNMP TARGETADDR ENTRY Create
#
home
configure snmp
add target-address "primary" "200.55.62.145:161" ipv4 1500 3 "trap" "traphost"
enabled
add target-address "secondary" "201.234.131.38:161" ipv4 1500 3 "trap" "traphost"
enabled
# Teoco_NM
add target-address Helix_agn1 "190.217.66.218:161" ipv4 1500 3 "trap" "traphost"
enabled
home
#
#CLI:ACCESS PORT-1-1-1-3 Edit
#
home
network-element ne-1
configure nte nte114pro-1-1-1
configure access-port access-1-1-1-3
admin-state unassigned
service-type evpl
back
configure access-port access-1-1-1-4
admin-state unassigned
service-type evpl
back
configure access-port access-1-1-1-5
admin-state unassigned
service-type evpl
back
configure access-port access-1-1-1-6
admin-state unassigned
service-type evpl
#end
home
