www.mrfixitdiy.

com
aaron@mrfixitdiy.com

www.mrfixitdiy.com
aaron@mrfixitdiy.com

DIY SLIDING BARN DOOR

INITIAL RELEASE
DESCRIPTION
PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: COVER SHEET

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
SCAN CODE TO WATCH
PROJECT VIDEO

MP
BY
REV DATE
5/5/18
MATERIALS

Reproduction of this document without the written authorization of

ITEM QTY COST *
2"X6" 8' 3 7.50 Amassed Media Group, LLC and it's
1"X6" 8' 1 8.07 affiliates are not responsible for any
TOUNGE AND GROOVE 3 21.36 damages that may come to persons
1"X4" 8' 1 2.49 or properties involved during the
BAR STOCK, 2"X72" 1/8" THICK 1 15.00 creation or use of this project or
DIRECTIONS BAR STOCK, 2"X12" 1/8" THICK 2 7.50 plans. The use of these plans and
ANGLE, 2"X2" 1/8 THICK, 12" LONG 1 5.60 construction of this projects is

1. CUT ALL MATERIALS FOR DOOR WHEEL 2 7.50 acknowledgement that you as the
fabricator assume all liability for
2. ASSEMBLE DOOR WITH GLUE
1/4" WASHER 6 1.18 proper construction and safe use of
1/4" LAG, 6" LONG 6 4.38 the project through all stages.
3. CUT HANGING STRIP, HANGING BAR, TRACK, 3/8" WASHER 6 1.38
TRACK STOPS, & SPACERS 3/8" NUT 6 2.70 Drawings By: Woodshop Mike, LLC
4. PAINT METAL HARDWARE 3/8" CARRIAGE BOLT, 2-1/2" LONG 6 2.76 DWN BY:
5. MOUNT HANGING STRIP MP
6. INSTALL SPACERS, TRACK, & TRACK STOPS SCALE:
7. ATTACH HARDWARE TO DOOR TOTAL 67.52
SHT. NO:
8. HANG DOOR * MATERIALS WERE SOURCED THROUGH LOCAL MARKET IN 2018 C-1.00
ITEMNO DESCRIPTION QTY LENGTH
1 STILES, 1-1/2" X 5-1/2" 2 84"
2 RAILS, 1-1/2" X 5-1/2" 2 27"
3 CROSS RAIL, 1-1/2" X 5-1/2" 1 27"
4 TOUNGE AND GROOVE, 1" X 6" 21 35-1/2" 2
5 DECORATIVE SILES, 1" X 6" 2 42"
www.mrfixitdiy.com
aaron@mrfixitdiy.com

TOLERANCES UNLESS
OTHERWISE SPECIFIED

LINEAR
1/16"
ANGULAR
1

INITIAL RELEASE
DESCRIPTION
PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: BENCH ASSEMBLY

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
MP
BY
REV DATE
5/5/18
3

Reproduction of this document without the written authorization of

Amassed Media Group, LLC and it's
affiliates are not responsible for any
damages that may come to persons
or properties involved during the
creation or use of this project or
plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
fabricator assume all liability for
4 proper construction and safe use of
the project through all stages.

Drawings By: Woodshop Mike, LLC

5 DWN BY:
MP
SCALE: 1:10
SHT. NO:
P-1.00
 www.mrfixitdiy.com
aaron@mrfixitdiy.com

TOLERANCES UNLESS
36" OTHERWISE SPECIFIED

LINEAR
1/16"
ANGULAR
1

33-3/4"

INITIAL RELEASE
DESCRIPTION
PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: DOOR ASSEMBLY STEPS

84"

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
33-3/4"

MP
BY
REV DATE
A 5/5/18

Reproduction of this document without the written authorization of

Amassed Media Group, LLC and it's
STEP 1 STEP 2 STEP 3 STEP 4 affiliates are not responsible for any
damages that may come to persons
or properties involved during the
creation or use of this project or
plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
fabricator assume all liability for
proper construction and safe use of
the project through all stages.

Drawings By: Woodshop Mike, LLC

DWN BY:
MP
SCALE: 1:20
SHT. NO:
P-1.01
 2X 1"
5-1/2"

www.mrfixitdiy.com
2X 4-1/2" aaron@mrfixitdiy.com

TOLERANCES UNLESS
OTHERWISE SPECIFIED

LINEAR
1/16"
ANGULAR
1
84"
1"
3/4"

INITIAL RELEASE
DESCRIPTION
RAILS

PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: DOOR PARTS

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
2X 1" 2X 1"

MP
BY
REV DATE
5/5/18
2X 3-1/2"

Reproduction of this document without the written authorization of

3/4"
Amassed Media Group, LLC and it's
1" affiliates are not responsible for any
damages that may come to persons
or properties involved during the
creation or use of this project or
plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
fabricator assume all liability for
proper construction and safe use of
the project through all stages.

1-1/2" 2X 1" Drawings By: Woodshop Mike, LLC

DWN BY:
2X 3/4"
MP
SCALE: 1:10
STILES CENTER RAIL SHT. NO:
P-1.02
 2X 37.2°

www.mrfixitdiy.com
aaron@mrfixitdiy.com

2X 90.0°
TOLERANCES UNLESS
OTHERWISE SPECIFIED

LINEAR
1/16"
ANGULAR
1
1/4"
3/16" X 45° TYP. 1/4"

INITIAL RELEASE
DESCRIPTION
42"

PROJECT NAME: DIY SLIDING BARN DOOR

35-1/2" 5-1/4"

DRAWING NAME: DOOR PARTS

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
MP
BY
REV DATE
5/5/18
1/4"

Reproduction of this document without the written authorization of

1/4"
Amassed Media Group, LLC and it's
affiliates are not responsible for any
damages that may come to persons
5-1/2" or properties involved during the
creation or use of this project or
plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
DECORATIVE STILES fabricator assume all liability for
TOUNGE AND GROOVE proper construction and safe use of
the project through all stages.

Drawings By: Woodshop Mike, LLC

DWN BY:
MP
SCALE: 1:8
TOUNGE AND GROOVE CAN BE PURCHASED OR MILLED. SHT. NO:
PROFILE IS FOR REFERENCE IF YOU CHOOSE TO MILL YOUR OWN
P-1.03
ITEMNO DESCRIPTION QTY
1 MOUNTING STRIP, 1" X 4" 1
2 SPACER 6
3 TRACK 1
4 TRACK STOP 1
www.mrfixitdiy.com
5 1/4" WASHER 6
aaron@mrfixitdiy.com
6 1/4" LAG X 6" 6
7 3/8" NUT 6
8 3/8" WASHER 6
TOLERANCES UNLESS
9 CARRIAGE BOLT, 3/8" X 2-1/4" 6
10 WHEEL 2 OTHERWISE SPECIFIED
11 HANGING BAR 2
LINEAR
1 1/16"
2 ANGULAR
1

INITIAL RELEASE
DESCRIPTION
4

PROJECT NAME: DIY SLIDING BARN DOOR

3

DRAWING NAME: TRACK ASSEMBLY

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
5 6
10

MP
BY
REV DATE
A 5/5/18

Reproduction of this document without the written authorization of

Amassed Media Group, LLC and it's
affiliates are not responsible for any
damages that may come to persons
or properties involved during the
creation or use of this project or
plans. The use of these plans and
11 construction of this projects is
acknowledgement that you as the
fabricator assume all liability for
proper construction and safe use of
8 8 7 the project through all stages.

Drawings By: Woodshop Mike, LLC

DWN BY:
MP
SCALE: 1:6
SHT. NO:
P-1.04
 75"

www.mrfixitdiy.com
aaron@mrfixitdiy.com
4"
TOLERANCES UNLESS
OTHERWISE SPECIFIED
4X 16" 6X 1-1/4" 1/4"
6X 3/4" LINEAR
1/16"
0"
2-1/2"

8-1/2"

24-1/2"

40-1/2"

56-1/2"

72-1/2"
ANGULAR
1

MOUNTING STRIP

INITIAL RELEASE
DESCRIPTION
PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: TRACK PARTS

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
MP
BY
REV DATE
5/5/18
72"

Reproduction of this document without the written authorization of

5/8"
Amassed Media Group, LLC and it's
2"
affiliates are not responsible for any
damages that may come to persons
or properties involved during the
4X 16" creation or use of this project or
6X 1/4" THRU plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
0"
1"

7"

23"

39"

55"

71"
fabricator assume all liability for
proper construction and safe use of
the project through all stages.

Drawings By: Woodshop Mike, LLC

DWN BY:
MP
TRACK SCALE: 1:8
SHT. NO:
P-1.05
 www.mrfixitdiy.com
aaron@mrfixitdiy.com

TOLERANCES UNLESS
OTHERWISE SPECIFIED

LINEAR
1/16"
ANGULAR
1" 1
1-1/4"
2"
1/4" 1 3/4"
3X 3/8" THRU

INITIAL RELEASE
DESCRIPTION
9-1/2"

PROJECT NAME: DIY SLIDING BARN DOOR

DRAWING NAME: TRACK PARTS

Amassed Media Group, LLC is strictly prohibited Copyright 2018,Amassed Media Group, LLC
12"

MP
BY
1/4" THRU
3-1/2"

REV DATE
5/5/18
1-1/2" 1-3/4"

Reproduction of this document without the written authorization of

Amassed Media Group, LLC and it's
0" 5/8" affiliates are not responsible for any
damages that may come to persons
1" or properties involved during the
creation or use of this project or
plans. The use of these plans and
construction of this projects is
acknowledgement that you as the
fabricator assume all liability for
proper construction and safe use of
the project through all stages.

Drawings By: Woodshop Mike, LLC

DWN BY:
HANGING BAR SPACER TRACK STOP MP
SCALE: 1:4 SCALE: 1:2
SHT. NO:
P-1.06