Britacel Silicones Ltd.
SEBACEL 540
MICRO AMINO SILICONES
CHARACTERISTICS BENEFITS
micro amino silicone with amino groups Makes the fabric smooth and soft & is
present on siloxane backbone specially designed for cotton and their
blends.
Small particle size with ability to cross-link Gives very good elasticity to the fabric.
with fibres
Due to the higher concentration it can be
High concentration work in lesser dosages and give good
smooth and soft feel to the fabric
PROPERTIES
Ionic nature: Nonionic
Physical Appearance: Clear to pale yellow liquid
Specific Gravity at 25ºC: 0.99 - 1.05
pH (10% aq.) 4.5 - 7
Compatibility: Compatible with most cationic and nonionic products used
in textile finishing
Solubility in water at 25ºC: Readily soluble
Storage stability: SEBACEL 540 is stable for 6 months when properly stored
in closed containers at 25ºC
Ecology/Toxicology: The usual hygiene and safety rules for handling chemicals
should be observed in handling, storage and use of the
product. The product must not be swallowed.
Technical Data Sheet: SEBACEL 540 Page 1 of 2
Britacel silicones Ltd.
F-18, F Block Road, MIDC Marol, Andheri (East), Mumbai – 400093
Tel: 0091 22 4009 4000, Fax: 0091 22 4009 4003
E-mail: britacel@vsnl.com or brisil@vsnl.com Website: www.britacelsilicones.com
Britacel Silicones Ltd.
APPLICATION
It is recommended to apply the product by padding method and for garments in drum
washer.
Padding application
10 –20 g/l SEBACEL 540
Is recommended in the padding bath depending on the type of fabric and softness
desired followed by drying at 160-180ºC for 45 secs.
NOTES
It is not recommended to be used on jet machines or other machines with very high
shear action as it can cause emulsion breakage
If exposed to atmospheric air for a prolonged duration product becomes hazy and hence
it should be kept all the times in closed containers away from direct sunlight
ATTENTION
The information given above is in line with our present state of knowledge and
experience and is without any guarantee. Users must thoroughly test any application
before any commercialization. We are not liable for damages due to improper application
of our products.
Technical Data Sheet: SEBACEL 540 Page 2 of 2
Britacel silicones Ltd.
F-18, F Block Road, MIDC Marol, Andheri (East), Mumbai – 400093
Tel: 0091 22 4009 4000, Fax: 0091 22 4009 4003
E-mail: britacel@vsnl.com or brisil@vsnl.com Website: www.britacelsilicones.com