700206725 | MGS400-262
GigaSPEED XL® MGS400 Series Category 6 U/UTP Information
Outlet, white
Electrical performance guaranteed to meet or exceed the channel specifications to ISO
/IEC 11801 Class E and ANSI/TIA-568-C.2 Category 6
Patented crossing of straddling pair contacts enables efficient alien crosstalk reduction in
the channel
Snaps into standard M-series faceplates, surface-mount boxes, consolidation point boxes
and modular panels
Mountable either at 90 degrees (straight) or 45 degrees (angled) in M-series faceplate
Universal design and label supports both T568 A & B wiring
IDC connector terminations on rear of base allow quick and easy installation of 22 to 24
AWG cable
Support network line speeds up to at least 10 gigabits per second
Low-profile rear protective strain relief cap, protects against contamination and secures
the connection
Product Classification
Regional Availability Asia | Australia/New Zealand | EMEA | Latin
America | North America
Portfolio SYSTIMAX®
Product Type Modular jack
Product Brand GigaSPEED XL®
General Specifications
ANSI/TIA Category 6
Cable Type Unshielded
Color White
Conductor Type Solid | Stranded
Mounting Note Color matches with M-series White Faceplates and Surface
Mount Boxes
Termination Type IDC
Wiring T568A | T568B
Dimensions
Height 20.32 mm | 0.8 in
Width 20.32 mm | 0.8 in
30.48 mm | 1.2 in Page 1 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 1, 2020
700206725 | MGS400-262
Depth 30.48 mm | 1.2 in
Compatible Conductor Gauge, solid 22 AWG | 24 AWG
Compatible Conductor Gauge, stranded 22 AWG | 24 AWG
Electrical Specifications
Contact Resistance Variation, maximum 20 mOhm
Contact Resistance, maximum 100 mOhm
Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz
Dielectric Withstand Voltage, RMS, contact-to-contact 1,000 Vac @ 60 Hz
Insulation Resistance, minimum 500 MOhm
Remote Powering Fully supports the safe delivery of power over LAN cabling
described by IEEE 802.3bt (Type 4) and complies with the
unmating under electrical load requirements prescribed by IEC
60512-99-002
Material Specifications
Contact Plating Material Precious metals
Material Type Copper alloy | High-impact, flame retardant, thermoplastic
Termination Contact Plating Nickel
Mechanical Specifications
Plug Insertion Life, minimum 750 times
Plug Insertion Life, test plug IEC 60603-7 compliant plug
Plug Retention Force, minimum 133 N | 29.9 lbf
Environmental Specifications
Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F)
Storage Temperature -40 °C to +70 °C (-40 °F to +158 °F)
Relative Humidity Up to 95%, non-condensing
Flammability Rating UL 94 V-0
Safety Standard UL | cUL
Packaging and Weights
Packaging quantity 1
Page 2 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 1, 2020
700206725 | MGS400-262
Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
Page 3 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 1, 2020
