Scribd
Upload
69 views5 pages

Cbb21 Metallized Polypropylene Film Capacitor Outline Drawing

1. This document provides specifications for a CBB21 metallized polypropylene film capacitor made by Hanway Technology including dimensions, part numbering format, ratings, test procedures, and performance specifications. 2. Key specifications include a rated voltage range of 100-1200V, a capacitance range of 0.01μF to 1μF, tolerances of ±1%, ±5%, and ±10%, and environmental ratings of -40 to +85°C and 40/085/21. 3. The capacitor is tested according to various procedures to ensure compliance with insulation resistance, dielectric strength, solderability, mechanical strength, and environmental reliability specifications.

Uploaded by

Ossama Bohamd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views5 pages

Cbb21 Metallized Polypropylene Film Capacitor Outline Drawing

1. This document provides specifications for a CBB21 metallized polypropylene film capacitor made by Hanway Technology including dimensions, part numbering format, ratings, test procedures, and performance specifications. 2. Key specifications include a rated voltage range of 100-1200V, a capacitance range of 0.01μF to 1μF, tolerances of ±1%, ±5%, and ±10%, and environmental ratings of -40 to +85°C and 40/085/21. 3. The capacitor is tested according to various procedures to ensure compliance with insulation resistance, dielectric strength, solderability, mechanical strength, and environmental reliability specifications.

Uploaded by

Ossama Bohamd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

CBB21 METALLIZED POLYPROPYLENE FILM CAPACITOR

— Outline Drawing

W T

P d

— Dimensions
Size(mm)
No. Type
W±1 H±1 T±1 P±1 d
1 MET-333-400JP10 12 8 5 10 0.6

— Hanway Technology (H.K.) Ltd. ordering part-number:

MET-333-400JP10

MET: Capacitor Type ( MET for Metallized Capacitor)

333: Capacitor Value

400: Capacitor Voltage

J: Tolrence (J= +/-5%)


P10: Pitch Size P=10mm

Remarks: This part-number are only applicable for ordering this item from Hanway.

1、Model/type：Only for “CBB21” Metalized Polypropylene Film


Capacitor
(*CBB21 is a material type, defined by factory)
2、Climate category：40/085/21
3、Rated Voltage：100V、250V、400V、630V 、1200V
4、Capacitance Range：0.01μF～1μF
Code Capacitance
103 = 10,000pf = 0.01μF
104 = 100,000pf = 0.1μF
105 = 1,000,000pf = 1μF
223 = 22,000pf = 0.022μF
474 = 470,000pf = 0.47μF
5、Symbols of Capacitance Tolerance：
F=+1% J=+5%
G=+2% K=+10%
H=+3% M=+20%
6、Printing：
1、 Capacitance Tolerance 400V 473 J
2、 Rated Value
3、 Rated Voltage 3 2 1
7 ． Specification

No. Test Test condition Specifications


1 Temperature -40 － +85
2 Rated Voltage 100V － 1200V
3 Capacitance range 0.01µF － 1µF
Capacitance Frequency： 1KHZ +0.1KHZ ， Tested
4 +5% （ J ）， +10% （ K ）
Tolerance Voltage ：≤1Vrms
Frequency： 1KHZ +0.1KHZ ， Tested CR≤1μF ≤0.002
5 Loss angle
Voltage ： ≤1Vrms CR ＞ 1μF ≤0.003
Tested Voltage： 100V
Insulation Temperature ： 20℃+5℃ C≤0.33µF ≥ 25000 MΩ
6
Resistance Duration ： 60+5sec
C＞ 0.33µF≥7500MΩ·µF
Dielectric
7 Tested Voltage ： 1.6UR ， Duration ： 1 － 5sec No Damage
Stremgth

Melting solder ： 235+5℃


8 Solderability Duration ： 2.0+0.5sec No Damage
Materials ： 60 ／ 40(Tin ／ Lead)
Solder ： 25 ／ 75(Resin ／ Alcohol)

Pull: 1.5Kg
Duration： 10sec
9 Lead Pull Test
No Damage

attaching a load of 1.5Kg to the end of the lead and


then rotating the capacitor 90 degree from the
10 Lead Bend Test
direction of lead degrees then 180 degree to opposite No Damage
direction

Immersed C／ C≤3 ％
11 Solder Test Melting solder:260+5℃ Δtgδ≤0.004
Duration ： 10+1 sec No Damage
Temperature： θ Ａ＝－ 40℃ ， θB ＝ +85℃ No Damage
12 Thermal Stability Duration ： 30min △C ／ C≤3 ％
Cycles ： 5 cycles Δtgδ≤0.004
Frequency ： 10 － 500HZ No Damage
13 Libration Libration ： 0.75mm △C／ C≤3 ％
△tgδ≤0.004
Collision Times:4000 times No Damage
14 Collision Test Acceletation Speed:390m/s, △C／ C≤3 ％
Duration:6ms △tgδ≤0.004
Temperature ： 40+2℃ No Damage
Humidity ： 90 － 95 ％ △C ／ C≤5 ％
No Test Test Condition Specification
Heat +85 , Duration ： 16h
Testing Db, level b, circular one
Humidity
Cold -40 , Duration ： 2h.
Temperature:15 -35 , Barometric :8.5kPa,
Duration ： 10min., after the test, UR 1mins. No Damage
Terp Barometric
erat
16
ure Testing Db, level b, all circular ended, add on
Test Circular UR1 minutes. No Damage
steaming
No Damage
Last △C ／ C≤5 ％
Test △tgδ≤0.005
RI≥ Initial*50 ％
No Damage
Load-life +85 , RV x 125%, Duration ： 1000h △C ／ C≤5 ％
17
continuous △tgδ≤0.004
RI≥ Initial*50 ％
Duration:10000cycles
C／ C≤5 ％
Charge and Charging Duration:0.5s
18 △tgδ≤0.005
discharge Test Discharge Duration:0.5s
RI≥ Initial*50 ％

You might also like