Scribd
Upload
275 views1 page

Material Number 1.4370 - X15Crnimn18-8: Composition in %

Material number 1.4370 is an X15CrNiMn18-8 stainless steel with the following key composition ranges: 17.20-19.80% chromium, 7.60-9.40% nickel, and up to 0.95% manganese. It is commonly used as a filler metal for stainless steel and is heat treated with solution annealing between 1020-1120°C followed by a water quench.

Uploaded by

sn200709
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
275 views1 page

Material Number 1.4370 - X15Crnimn18-8: Composition in %

Material number 1.4370 is an X15CrNiMn18-8 stainless steel with the following key composition ranges: 17.20-19.80% chromium, 7.60-9.40% nickel, and up to 0.95% manganese. It is commonly used as a filler metal for stainless steel and is heat treated with solution annealing between 1020-1120°C followed by a water quench.

Uploaded by

sn200709
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Material number 1.

4370     -     X15CrNiMn18-8
 
Composition in % :

Si Mn P S Cr Mo Ni
C
17,20 -
max. 0,19 max. 0,95 5,60 - 7,90 max. 0,035 max. 0,020   7,60 - 9,40
19,80

W Ti Cu Al Nb B N
V
               

Range of application and heat treatment :

Stainless steel : filler metal 


Solution annealing : 1020 - 1120 °C (water) 
General and distinctive features :

 
 
Material selection Analyses selection Pictures

http://www.metallograf.de/start-eng.htm

You might also like