Scribd
Upload
32 views1 page

2003 Faceting Challenge Design

The document provides details on the stone design for the 2003 North American Faceting Challenge, including that the stone is to be cut from clear or colored synthetic spinel, with a width of 10mm within a 0.1mm margin, and a girdle thickness of 0.3mm within 0.1mm without deduction.

Uploaded by

tristan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

2003 Faceting Challenge Design

The document provides details on the stone design for the 2003 North American Faceting Challenge, including that the stone is to be cut from clear or colored synthetic spinel, with a width of 10mm within a 0.1mm margin, and a girdle thickness of 0.3mm within 0.1mm without deduction.

Uploaded by

tristan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

U.S.F.G. Newsletter Vol. 11 No.

3 September, 2001

SECTION A STONE DESIGN FOR 2003 NORTH AMERICAN FACETING CHALLENGE


The stone is to be cut in SYNTHETIC SPINEL, clear or any color.

STONE WIDTH to be 10mm. There will be an allowed margin of 0.1mm + or - without deduction. Three 100% errors will be deducted
if the width is outside of the margin.

GIRDLE THICKNESS to be 0.3mm + or - 0.1mm without deduction.

Girdle will be polished and judged under the same categories on the score sheet as all other facets. Two other categories are specifically
designated for the girdle alone. They are GIRDLE THICKNESS and GIRDLE UNIFORM. §

25

You might also like