Professional Series

SRX712M 12" Two-Way Stage Monitor/

Utility Speaker

Key Features:

Compact and low-profile for minimal
obstruction of audience sight-lines

90° x 50° nominal coverage

Bi-amplified or full-range passive
operation

Dual-angle pole socket for
applications requiring tripod
mounting

Optional yoke available for truss-
mounted or suspended applications

Neodymium magnet Differential
Drive® woofer for high-power
capacity and very light-weight

3" (diaphragm) neodymium magnet
compression driver Shown with SRX718S
subwoofer and SS4-BK
Applications pole.

Live performance stage monitoring

Speech reinforcement The enclosure is constructed of top quality birch plywood and coated in

Reinforcement of vocal and acoustic JBL’s rugged DuraFlex™ finish. The attractive CNC-machined, 16-gauge steel
music grille wraps around the sides of the enclosure so there are no protruding lips

High-performance satellite speaker on the front of the box to create acoustical interference. The grilles are
for use with subwoofers internally lined with acoustically transparent foam to provide additional driver
protection and give a very professional appearance.
The SRX712M is a world-class,
professional stage monitor. The
Specifications:
SRX712M uses a JBL 2262H 305 mm System Type: 12", two-way, bass-reflex, stage-monitor / utility
(12 in) patented* Differential Drive® Frequency Range (-10 dB): 70 Hz – 20 kHz
Frequency Response (±3 dB): 83 Hz – 18 kHz
woofer and a 2431H 75 mm (3 in)
Coverage Pattern: 50° x 90° nominal (Monitor position)
voice-coil, neodymium compression Crossover Modes: Bi-amp / passive, externally switchable
driver for 800 watts (continuous) Crossover Frequency: 1.2 kHz
power capacity from a monitor with a Power Rating Passive: 800 W / 1600 W / 3200 W
profile that is only 12 inches above the (Continuous1 / Program / Peak): Bi-amp LF: 800 W / 1600 W / 3200 W
stage. A 50° x 90° aluminum horn Bi-amp HF: 75 W / 150 W / 300 W
provides smooth, even coverage Maximum SPL2: 131 dB SPL peak
whether the performer is standing right System Sensitivity (1w @ 1m): 96 dB SPL (passive mode)
on the speaker or moving upstage. LF Driver: 1 x JBL 2262H 305 mm (12 in) Differential Drive
woofer
Bi-amp or full-range passive HF Driver: 1 x JBL 2431H 75 mm (3 in) voice coil, neodymium
operation may be selected by a compression driver
recessed, high-current switch mounted Nominal Impedance: Passive: 8 ohms
in the handle cup. NL4 connectors are Bi-amp LF: 8 ohms
provided on both ends of the speaker Bi-amp HF: 8 ohms
Active Tunings: dbx DriveRack, all models. Settings available at
to keep cable runs tidy on stage. www.jblpro.com
The SRX712M can also do double Enclosure: Symmetrical stage monitor, 15 mm, 11-ply birch
duty as a utility speaker. For use on a plywood.
tripod or over a subwoofer, JBL's dual Suspension / Mounting: Dual-angle (0° or -10°), 35 mm pole socket
2 x M10 fittings for optional SRX712M-YK yoke
angle pole mount is included. This
Transport: Integrated handle / input cup
feature allows the speaker to be Finish: Black DuraFlex finish
mounted in a vertical position or with Grille: Powder coated, black, 16-gauge perforated steel with
a 10° down tilt for optimum audience acoustical transparent charcoal foam backing.
coverage. If suspension or truss Removable JBL badge and punched JBL logo.
mounting is a requirement, add the Input Connectors: Neutrik® Speakon® NL-4 (x2), one on each end
optional SRX712M-YK yoke bracket. Dimensions (H x W x D): 349 mm x 546 mm x 260 mm
This accessory provides attachment (13.75 in x 21.5 in x 10.25 in)
points for a wide range of suspension Net Weight: 15 kg (33 lb)
and truss mounting hardware. Optional Accessories: SRX712M-CVR: Pull-over padded cover
SRX712M-YK: Suspension / mounting yoke
*U.S. Patent 5,748,760; other U.S. and foreign patents IEC filtered noise with 6 dB crest factor.
1

pending. Calculated based on power rating and sensitivity.

2

JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design specifications unless otherwise stated.

SRX712M 12" Two-Way Stage Monitor/Utility Speaker
Block Diagram Frequency Response
-
1+ HPF HIGH
NL4 1- FREQ
INPUT 2+ +
2-

PASSIVE
MODE
+
1+ LPF LOW

SRX700 NL4 1-
INPUT 2+
2-
-
FREQ

Serial No. BI-AMP PASSIVE

±1 LF: 8 Ω ±1 IN: 8 Ω
±2 HF: 8 Ω ±2 N/C 1+
SRX712M NL4 1- +
INPUT 2+
HIGH
PASSIVE
BI-AMP

2- FREQ
-
BI-AMP
MODE
JBL PROFESSIONAL
Northridge, CA USA
+
Made in USA
1+ LOW
NL4 1- FREQ
INPUT 2+ -
2-

Beamwidth Directivity Index

Graphs represent performance with passive crossover network

Dimensions 260 mm
(10.2 in)
160 mm
(6.3 in) 115 mm 108 mm
(4.5 in) (4.3 in)
30° 546 mm
(21.5 in)

349 mm 127 mm
(13.7 in) (5.0 in)

305 mm
(12.0 in)

JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A. SS SRX712M
CRP 5M
A Harman International Company 08/04
© Copyright 2004 JBL Professional