WINNER
of the 2011 Best of
Bath Gold Award
Kitchen & Bath Industry
Show (KBIS), Las Vegas
Easy to maintain
Effortless to install
lustrolite.com Luxurious and elegant finish
The award winning Lustrolite
Panel brings life to any home
Lustrolite® is an advanced multi-layer acrylic sheet
that looks just like glass. Lustrolite applications include
shower walls, wash rooms, kitchens, bedrooms - any
interior vertical surface for the home.
Weighing less than a quarter of a traditional glass sheet,
Lustrolite is also stronger than equivalent glass panels.
The colour is permanently fused to the clear layer and it
is highly resistant to harsh chemicals, like bleaches and
solvents, because it has a unique hard coated surface.
Lustrolite is the ultimate experience - luxurious, lustrous
and the pinnacle of home interiors, and perfect for wall
and ceiling applications.
Effortless to Install
Lustrolite is easy to work with and can be
installed rapidly over new or existing wall finishes.
• Can be cut and drilled on site with normal
wood working tools
• Typical panel install takes about a third of the
time of ceramic tiles
• Joints can be sealed with neutral cure
transparent or colour matched silicone
Easy to Maintain
Lustrolite is easy to clean using warm water
and a soft micro fibre cloth or chamois.
Strong chemicals are not required.
• No grouting and less joints
• Non-stick surface will not promote mould,
bacteria, soap or calcium build up
• Highly resistant to typical shower and
glass cleaners
Luxurious and Elegant Finish
Each Lustrolite polymer panel is meticulously
finished, perfectly smooth, and looks just
like glass.
• High gloss lustrous surface
• Glass like depth of colour
• Will transform and add colour to any home
SHEET SIZES Perfect in the bathroom around fittings.
1000 1250
mm mm
2070mm
2070mm
2070mm (81”) x 1000mm 2070mm (81”) x 1250mm
(39”) x 4mm thick (5/32”) (49”) x 4mm thick (5/32”)
1000
mm
Great for larger walls
2440mm
or even ceilings.
2440mm (96”) x 1000mm (39”) x 4mm thick (5/32”)
Perfect for your kitchen splashbacks and
around bench space.
2700mm 760mm
760mm (30”) x 2700mm (106”) x 4mm thick (5/32”)
THE ENVIRONMENT
Lustrolite is formulated to have as minimal
impact on the environment as possible.
and LUSTROLITE Lustrolite consists only of Carbon, Hydrogen
and Oxygen. No VOC’s or harmful emissions
were created in manufacturing.
Lustrolite is wholly manufactured under the EGR
Environmental Management System, which has
been independently accredited to ISO14001.
Lustrolite is hygienic and does not promote
bacterial or mould growth or transmission
making it a safe and healthy choice for your
home.
INSTALLATION
INSTRUCTIONS
Lustrolite is so easy and quick
to install into any kitchen or Tools & Materials: Power saw, Area Preparation: Ensure the walls
jigsaw, drill, sandpaper, protective are smooth, clean and dry. All substrate
bathroom area - adding great equipment, silcone and a spatula. For wall linings must be sealed at the joints
a more detailed list of the equipment with silicone or waterproofing compound.
value and style. needed, please consult the install guide.
Measuring: Measure each wall area Marking Out: Mark all holes and cut Cutting: Using a circular saw will deliver
and decide on suitable panel size. lines on the film using a felt tip pen, do a straight and accurate cut. Best results
not use metal scribes. will be achieved by cutting through the
Lustrolite and into the sacrificial support
timber board.
Cutting: Jigsaws can be used for Edge Finishing: All Sawn edges must Panel Installation: Scuff the rear
cutting short distances such as power be sanded or planed prior to installation of surface with coarse scouring pad or 240
point openings. Cut with the colour side of Lustrolite panels. Edges can be sanded grit sandpaper.
Lustrolite facing UPWARDS with a jigsaw. using a sanding block or an electric planer.
Panel Installation: Apply a 6 mm Panel Installation: Seal the joints Panel Installation: After the silicone
bead of translucent neutral cure silicone with neutral cure wet area silicone. Once is applied, remove the outer protective
in a wavy pattern between each tape gap is filled, remove excess silicone film or masking tape in one continuous
strip. Run a bead of silicone on the rear using a soft flexible plastic spatula. movement to achieve the best finish.
of the panel around any holes or cut
outs.
COLOUR RANGE
Glacier Carbon
Mocha Rouge Blue Atoll Arctic
PANEL High Performance
Lustrolite features an integrated colour layer, a thick optical grade clear layer and
PROPERTIES an extra high performance micro hard coat on the outer surface.
• High chemical and stain resistance
• High scratch and wear resistance
• Co-extruded colour layer
• High heat and thermal shock resistance
Note: Lustrolite is for indoor, vertical surfaces only and should NOT be used in contact with direct heat source
above 70°C (158°F).
CHEMICAL • The following chemicals had no effect: Spray & Wipe®, Windex®, Glass
Cleaner, Acetic Acid 5%, Citric Acid, Mineral Turpentine, Bleach or Isopropyl
RESISTANCE Alcohol.
Note: Not suitable for use with strong alkalies.
HARDNESS >6H
COMPARISON 4H
2H
B
LUSTROLITE Laminates Acrylic
LUSTROLITE • L
ITE • US
O L TR
T R OL
LUS
10 YEAR
I TE
• 10
6H
•
0%
warranty
waterproo
E
LU
IT
pencil
OL
dness SS WALLS
TR
G LA
TR
har f
O
LIT
US
LA
M
IN
• L
E •
than
glass
AT
installing
pricewalls
E
3x
S
quicker
tiles
of
LUSTROLITE
The EGR Group founded in 1973, has over 4 decades
of global manufacturing experience and is a leader in
developing breakthrough products for the dynamic building
and industrial markets.
BY EGR
EGR is an Australian multinational Corporation that
employs over 800 people worldwide servicing a portfolio
of international distributors and some 60 multinationals
located in more than 40 countries around the world.
Lustrolite was borne of the EGR pedigree in high technology
plastics manufacturing, and is a world class extruded
decorative sheet that will revolutionise the market.
lustrolite.com
AUSTRALIA
HEAD OFFICE
Tel: +61 7 3718 8100 | Fax: +61 7 3718 8198
Email: Lustrolite-ROW@egrgroup.com
EUROPE
HEAD OFFICE
Tel: +44 (0)1908 264 800 | Fax: +44 (0)1908 265 088
Email: Lustrolite-EUROPE@egrgroup.com
NORTH AMERICA
HEAD OFFICE
To view the latest To view the latest Tel: +1 909 923 7075 | Fax: +1 909 923 9045
Lustrolite Video scan Lustrolite Installation Email: Lustrolite-USA@egrgroup.com
the QR Code with Video scan the QR Code
your smart device with your smart device © Copyright 2013 / Patent Pending
09/13 2/r 00635
1. EGR expressly disclaims any representations or warranties of any kind, whether express or implied, as to the accuracy, currency, completeness and/or the merchantability or fitness
for a particular purpose of any information contained in or provided via this documentation and/or any service or product described or promoted in this document. 2. It is the customer’s
responsibility to thoroughly examine Lustrolite by a qualified person, to determine whether it is suitable for the application it was purchased for. 3. The receiver of our products is fully
responsible to check and to take into account possible third party’s patent rights, as well as the existing laws in the country of installation prior to installing our product. 4. No liability may be
derived from these images or statements nor from our free technical advice. 5. Due to the nature of the printing process, the colours depicted in this brochure may vary compared to the actual
products’ colour. 6. Printed colours and images are to be used as a guide only. 7. EGR reserves the right to change, add or remove colours without notice.
