SERIES GU CONTROL VALVES

GLOBE-SINGLE SEATED, TOP GUIDED

Metso's Neles series GU single seated, top guided
globe valves are economical high-performance
control valves designed to provide the best possible
control accuracy and wide rangeability with all the
inherent benefits of linear control valves. Standard
units are equipped with spring diaphragm actuators
and NDX® intelligent valve controllers for precise
flow control, extended operational life and
performance monitoring on-line.

Construction
□ Compact and lightweight construction
□ Wide variety of trims with different Cv and characteris-
tics
□ Both metal and soft seats are available depending on
the application
□ Optional bellows seal for toxic or other applications
where no stem seal leakage is allowed
□ Wide material selection for different applications
□ Many end connection styles available for different
applications
□ Extension bonnet design for wide temperature range

Accurate control Safety and quality

□ NDX digital valve controller for auto-calibration and □ Rugged one piece body to minimizes the leak paths
accurate control and makes the valve less prone to pipe stress
□ Accurate and sensitive diaphragm and piston actuators □ Strictly tested to ensure specified performance with
quality assurance systems in accordance to ISO 9001
□ Certified ISO 15848 fugitive emissions
Wide range of applications □ Certified CE/PED & ATEX, TSG & EAC (GOST-R)
□ Suitable for gas, liquid and steam
□ Temperature limits -29 ... +260 °C (-20 ... +500 °F) with Easy maintenance
general bonnet construction. Over +260 °C (+500 °F) □ Quick change trim and top entry construction for easy
and under -29 °C (-20 °F) with extended bonnets. in-line maintenance
□ Tendril multi-hole trim for high pressure drop and cavi- □ Self guided components makes for easy valve assembly
tation applications □ Flow characteristics can be easily changed with inter-
□ Micro trim for small flow and/or to get rid of the stabil- changable trim components
ity problems in high pressure drop application □ NDX digital valve controller with online diagnostics
□ Inherently characterized trims offered in equal percent- enables performance follow up and predictive mainte-
age, linear and quick open nance
□ Efficient asset management with Metso FieldCare
open architecture software and excellent networking
capabilities
4 GV 21 EN • 1/2019
 METSO 4 GV 21 EN

Different trim designs

Contoured trim Tendril (multi-hole) trim

Quick change, general contoured trim Tendril trim

Quick change, general contoured plug offers a smooth flow pro- The trim design presented a multi-hole trim. There is Tendril 1
file. The trim is most suited to low pressure drop application and design in standard depending on pressure drop and
is used in the majority of control applications. potential for cavitation.
The pressure drop is divided by multi-holes so that the pressure
progressively reduces as it passes through the trim. This gives
excellent resistance to cavitation on high pressure drop applica-
tions.
Contoured soft seat trim
Micro trim

Soft seat trim

Micro trim
An alteration of the standard contoured trim is the soft seated
option. The seat ring is manufactured with a clamped on shroud The micro trim design is seat guided construction, capable of
which locks the soft seated ring in position. When the soft face handling high pressure drops, without instability problems. This
contacts the seating point it deforms the softer ring ensuring a trim design has an inherent characteristic of linear, and has excel-
high degree of closure. The soft seated trim is used on applica- lent rangeability. It is an ideal selection for the control of very low
tions where bubble tight shut off is required. flow rates. Please contact Metso for micro trim applications.

2 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

Components & materials

9B 14

9A
18

69

21

67
8
5

13 19

17 19A
65
6

10

1
63

Body material: Carbon steel or alloy steel Body material: Stainless steel
Part no. Description Material Material Spare
1 BODY A216 WCB / ALLOY STEEL AVAILABLE A351 CF8M
2 PLUG SET 410 SS / 630 SS 316 SS / 316 SS Cat 3
3* PLUG 410 STAINLESS STEEL 316 STAINLESS STEEL Cat 3
4 GUIDE BUSHING 440C STAINLESS STEEL 316 + COBALT BASED ALLOY
5* STEM 630 STAINLESS STEEL + HCr 316 STAINLESS STEEL + HCr Cat 3
6* PLUG PIN 316 STAINLESS STEEL 316 STAINLESS STEEL Cat 3
7 SEAT RING 410 STAINLESS STEEL 316 STAINLESS STEEL Cat 3
8 BONNET A216 WCB / ALLOY STAINLESS STEEL A351 CF8M
9A GLAND 304 STAINLESS STEEL 304 STAINLESS STEEL
9B GLAND FLANGE A351 CF8 A351 CF8
10 RETAINER 630 STAINLESS STEEL A351 CF8M Cat 3
13 STUD A193 Gr.B7 A193 Gr.B8(M)
14 STUD A193 Gr.B8 A193 Gr.B8
17 HEXAGON NUT A194 Gr.2H A194 Gr.8(M)
18 HEXAGON NUT A194 Gr.8 A194 Gr.8
19 IDENTIFICATION PLATE 304 STAINLESS STEEL 304 STAINLESS STEEL
19A RIVET 304 STAINLESS STEEL 304 STAINLESS STEEL
21 LANTERN RING 304 STAINLESS STEEL 304 STAINLESS STEEL
63 SEAT GASKET S/W GASKET, 316L SS + GRAPHITE S/W GASKET, 316L SS + GRAPHITE Cat 1
65 BODY GASKET S/W GASKET, 316L SS + GRAPHITE S/W GASKET, 316L SS + GRAPHITE Cat 1
67 PACKING SPACER 304 STAINLESS STEEL 304 STAINLESS STEEL
69 PACKING RING PTFE + CARBON FIBER PTFE + CARBON FIBER Cat 1
Note. Note.
1. Plug/Seat Hard Facing(Cobalt based alloy) & Soft Seat are available. 1. Plug/Seat Hard Facing(Cobalt based alloy) & Soft Seat are available
2. Materials description 2. Materials description
316 SS : ASTM A276 TP316 or JIS 316 St. Steel 316 SS : ASTM A276 TP316 or JIS 316 St. Steel
440C SS : ASTM A276 TP440C ot JIS 440C St. Steel 3. Above standard materials to be applicable depending on specific service
410 SS : ASTM A276 TP410 or JIS 410 St. Steel conditions, other optional materials to consult Metso
3. Above standard materials to be applicable depending on specific service 4. Cryogenic application : ASTM A320 B8M & 8M for Studs(13) and Nuts(17)
conditions, other optional materials to consult Metso 5. Optional materials to meet to requirements of NACE MR 01-75 are available
4. Optional materials to meet to requirements of NACE MR 01-75 are available 6. The materials are subject to change as equivalent depending on detail design
5. The materials are subject to change as equivalent depending on detail design 7. The part no.3* , 5* , 6* are delivered as a set with no.2
6. The part no.3* , 5* , *6 are delivered as a set with no.2 8. The body name plate is attached to the body when only the bare shaft is required
7. The body name plate is attached to the body when only the bare shaft is required and attached to the actuator when whole assembly (It means to assemble valve
and attached to the actuator when whole assembly (It means to assemble valve and actuator) is required.
and actuator) is required.

TECHNICAL BULLETIN 1/19 3

 METSO 4 GV 21 EN

GU, Application guide

GU, Temperature range and seat leakage class with Temperature range with different body and
different bonnet and seat application stud/nut materials
Seat leakage class Temp.
Temperature range (°C) Body, Bonnet Material Stud Bolt , Nut material Sign
Valve Size ASME Seat (ANSI B 16.104) range, (°C)
DN / Inch rating type General Extension ASTM A193-B7 STUD
Standard Optional Carbon steel (WCB, A105) -29 ~ +425 A
bonnet bonnet ASTM A194-2H NUT

Metal ASTM A193-B7 STUD

-29 ~ +260 -109 ~ +593 IV V -46 ~ +538 A
Seat Stainless steel ASTM A194-2H NUT
15/0.5~ 150 ~
100/4 600 (CF3, CF8,CF3M, CF8M) ASTM A193(320)-B8(M) STUD
Soft
Seat
-29 ~ +232 -109 ~ +232 VI ASTM A194(320)-8(M) NUT -196 ~ +538 B

15/0.5~ 900 ~ Metal Cr.Mo. Steel ASTM A193-B16 STUD

-29 ~ +260 -109 ~ +593 IV V -29 ~ +593 *
80/3 2500 Seat (WC6, F11, WC9, F22,C12A, F91) ASTM A194-4 NUT
*Please contact Metso

Trim materials
GU, Trim
Temperature range (°C) Sign
Plug Stem Seat Retainer
410 SS 630 SS + HCr 410 SS 630 SS -29 ~ +425 P1XBCS1R1X
316 SS 316 SS + HCr 316 SS 316 SS -196 ~ +315 T6XTCS1T6X
316 SS + Cobalt based alloy 316 SS + HCr 316 SS + Cobalt based alloy 316 SS -196 ~ +425 T6ATCS1T6A
420 J2 630 SS + HCr 420 J2 420 J2 -10 ~ +540 *
316 SS 316 SS + HCr 316 SS + PTFE 316 SS -196 ~ +232 *
630 SS 630 SS + HCr 410 SS 410 SS -29 ~ +425 *
Inconel 718 Inconel 718 F91 F91 -29 ~ +593 *
Inconel 625, 718, 750 -196 ~ +645 *
*Please contact Metso

Gasket applications Flow direction

Body, Bonnet Temp. Fluid Media Flow to Open Flow to Close
Gasket material Sign
material range (°C)
Liquid o *
Carbon steel S/W (Spiral Wound) -29 ~ +425
S Steam
WCB, A105 316SS + Graphite o *
Gas
S/W (Spiral Wound)
Stainless steel 316L SS + Graphite -196 ~ +425 S *Please contact Metso
CF8, CF8M, CF3,
CF3M S/W (Spiral Wound) -196 ~ +232 L Cv Ratio 50: 1
316SS + PTFE
S/W (Spiral Wound)
316L SS + Graphite (Aramid) H Flow Characteristics Equal percentage, linear and quick
Cr.Mo. Steel
WC6, WC9, F22, S/W (Spiral Wound) 316L SSm+ -29 ~ +593 open
C12A, F91 Graphite + Mica *
(special Hi-Temp. max 950)

*Please contact Metso

Packing applications
Packing material Temp (°C) Pr. Class Sign
PTFE + Carbon Fiber (Braided TEF + -196 ~ +260 Up to CL900 G
Graphite), standard
PTFE V-Ring - 49 ~ +232 Up to CL600 T
Graphite (with Mold + Braided) -196 ~ +400 Up to CL2500 F
Hi-Graphite (with Mold + Braided) -49 ~ +593 Up to CL2500 H
RTFE V-Ring + Metal - 40 ~ +350 Up to CL600 M

GU, Ratings & end connetions

GU, ASME Ratings
Valve size
Class 150 - 600 Class 900 - 2500
DN / Inch"
RF RTJ SW BW RF RTJ SW BW
25 / 1 O O O O O O
40 / 1-1/2 O O O O O O
50 / 2 O O O O O O O
80 / 3 O O O
100 / 4 O O O
*Note 1. RF: Raised Face Flange, RTJ: Ring Joint, SW: Socket Weld, BW: Butt Weld

4 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

Packing constructions

18

14
9A Gland
9B
9B Gland Flange
9A
12
69 12 Disk Spring Ass'y

21 14 Stud
18 Hexagon Nut
67
21 Lantern Ring
67 Packing Spacer
69 Packing Ring

Standard construction Low Emission with

Live Load Spring

TECHNICAL BULLETIN 1/19 5

 METSO 4 GV 21 EN

Rated Cv and trim table(Globe single seat, unbalanced type, series GU)
20. 21. 22. RATED Cv
TRIM TRIM
Description Body size and stroke
Sign TYPE Sign CHARACTERISTIC Sign
0.5" Str. 0.75" Str. 1" Str. 1.5" Str. 2" Str. 3" Str. 4" Str. 6" Str.
A General plug L Linear FC General / Full capacity 7 (20) 9 (20) 13.5 (20) 28 (20) 49 (20) 100 (40) 190 (40) 295 (60)
E Equal % 1A General / 1-Step reduction 4 (20) 5.5 (20) 8.5 (20) 16 (20) 28 (20) 70 (40) 120 (40) 165 (60)
2A General / 2-Step reduction 2.3 (20) 3 (20) 5.4 (20) 10.5 (20) 17 (20) 42 (40) 72 (40) 85 (60)
3A General / 3-Step reduction 1.5 (20) 2 (20) 3.1 (20) 6 (20) 10 (20) 25 (40) 42 (40) 50 (60)
4A General / 4-Step reduction 0.8 (20) 1.2 (20) 2 (20) 4 (20)
5A General / 5-Step reduction 0.5 (20) 0.7 (20) 1.2 (20) 2.2 (20)
6A General / 6-Step reduction 0.3 (20) 0.4 (20) 0.8 (20) 1.2 (20)
FT Tendril / Full capacity 7 (20) 9 (20) 13.5 (20) 28 (20) 49 (20) 100 (40) 190 (40) IQI (60)
1T Tendril / 1-Step reduction 4 (20) 5.5 (20) 8.5 (20) 16 (20) 28 (20) 70 (40) 120 (40) IQI (60)
2T Tendril / 2-Step reduction 2.3 (20) 3 (20) 5.4 (20) 10.5 (20) 17 (20) 42 (40) 72 (40) IQI (60)
3T Tendril / 3-Step reduction 1.5 (20) 2 (20) 3.1 (20) 6 (20) 10 (20) 25 (40) 42 (40) IQI (60)
4T Tendril / 4-Step reduction 0.8 (20) 1.2 (20) 2 (20) 4 (20)
5T Tendril / 5-Step reduction 0.5 (20) 0.7 (20) 1.2 (20) 2.2 (20)
6T Tendril / 6-Step reduction 0.3 (20) 0.4 (20) 0.8 (20) 1.2 (20)
C Micro plug L Linear FC General / Full capacity 0.1 (20) 0.1 (20) 0.1 (20)
1A General / 1-Step reduction 0.06 (20) 0.06 (20) 0.06 (20)
2A General / 2-Step reduction 0.03 (20) 0.03 (20) 0.03 (20)
3A General / 3-Step reduction 0.01 (20) 0.01 (20) 0.01 (20)
4A General / 4-Step reduction 0.006 (20) 0.006 (20) 0.006 (20)
5A General / 5-Step reduction 0.003 (20) 0.003 (20) 0.003 (20)
Y Special Y Special YY Special Contact Metso for Cv details
- Rated Cv is different depending on trim type and characteristic.
- Str. : valve stroke length(mm). It should be matched with actuator stroke length.

6 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

GU Series Cv vs Travel (General Contoured)

ANSI Class: 150# ~ 1500#
Size: 1/2" ~ 6" Flow Characteristic: LINEAR
Valve Travel [%] 10 20 30 40 50 60 70 80 90 100
FL 0.93 0.93 0.92 0.92 0.91 0.91 0.91 0.90 0.90 0.90
Valve Size Orifice Dia. Travel
Rated Cv
Inch mm Sign Inch mm Inch mm
FC 0.6 15.7 0.53 1.27 1.95 2.66 3.38 4.09 4.76 5.51 6.67 7.0
1A 0.4 11.0 0.36 0.74 1.23 1.61 1.99 2.37 2.72 3.05 3.41 4.0
2A 0.3 8.0 0.28 0.53 0.79 1.07 1.32 1.52 1.71 1.88 2.03 2.3
1/2" 15 3A 0.3 6.4 0.8 20 0.19 0.36 0.52 0.67 0.82 0.97 1.15 1.28 1.38 1.5
4A 0.3 6.4 0.09 0.17 0.25 0.32 0.40 0.47 0.54 0.61 0.68 0.8
5A 0.3 6.4 0.06 0.11 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.5
6A 0.3 6.4 0.04 0.07 0.10 0.12 0.15 0.18 0.21 0.24 0.27 0.3
FC 0.7 17.2 0.85 1.68 2.57 3.31 4.04 4.74 5.43 6.18 7.61 9.0
1A 0.5 13.0 0.35 0.82 1.40 2.17 2.78 3.39 3.98 4.53 5.03 5.5
2A 0.4 9.0 0.29 0.74 1.08 1.40 1.73 2.13 2.37 2.60 2.80 3.0
3/4" 20 3A 0.3 7.2 0.8 20 0.24 0.44 0.63 0.81 0.99 1.16 1.32 1.47 1.62 2.0
4A 0.3 6.4 0.13 0.24 0.36 0.48 0.60 0.72 0.84 0.96 1.08 1.2
5A 0.3 6.4 0.08 0.15 0.22 0.28 0.35 0.42 0.49 0.56 0.63 0.7
6A 0.3 6.4 0.05 0.09 0.13 0.17 0.21 0.25 0.28 0.32 0.36 0.4
FC 0.9 22.3 1.29 2.62 4.02 5.42 6.83 8.13 8.90 10.25 11.93 13.5
1A 0.6 15.0 0.77 1.54 2.31 3.15 3.92 4.68 5.42 6.12 7.00 8.5
2A 0.5 11.5 0.46 0.94 1.43 1.94 2.46 3.02 3.52 4.00 4.44 5.4
1" 25 3A 0.4 9.0 0.8 20 0.28 0.56 0.86 1.16 1.47 1.77 2.07 2.36 2.66 3.1
4A 0.3 7.2 0.18 0.37 0.57 0.78 0.99 1.20 1.41 1.61 1.79 2.0
5A 0.3 6.4 0.11 0.23 0.35 0.47 0.59 0.71 0.83 0.95 1.07 1.2
6A 0.3 6.4 0.07 0.14 0.21 0.28 0.34 0.41 0.48 0.55 0.62 0.8
FC 1.2 30.0 2.64 5.38 8.46 11.77 15.22 18.77 21.56 24.09 26.50 28.0
1A 0.8 21.5 1.63 3.16 4.70 6.25 7.90 9.52 11.12 12.68 14.18 16.0
2A 0.6 16.0 0.95 1.89 2.86 3.86 4.88 5.88 6.90 7.92 8.86 10.5
1-1/2" 40 3A 0.5 12.5 0.8 20 0.57 1.13 1.72 2.33 2.96 3.58 4.19 4.78 5.33 6.0
4A 0.4 10.0 0.37 0.74 1.14 1.54 1.96 2.38 2.79 3.18 3.55 4.0
5A 0.3 7.0 0.19 0.38 0.57 0.78 0.99 1.19 1.40 1.60 1.78 2.2
6A 0.3 6.4 0.12 0.24 0.36 0.47 0.59 0.71 0.83 0.95 1.06 1.2
FC 1.7 43.9 4.13 9.24 14.48 19.71 25.09 30.56 35.97 40.01 44.64 49.0
1A 1.3 33.4 2.27 4.97 7.88 10.94 13.72 16.51 19.28 22.03 24.97 28.0
2" 50 0.8 20
2A 0.8 21.5 1.26 2.76 4.37 6.05 7.77 9.53 11.23 12.73 14.32 17.0
3A 0.6 16.0 0.82 1.78 2.80 3.86 4.93 5.98 7.01 7.98 8.89 10.0
FC 2.8 72.0 9.96 21.06 32.40 42.65 52.98 63.70 76.67 86.07 91.15 100.0
1A 1.9 47.0 5.35 11.64 18.74 26.58 33.66 40.46 47.18 53.74 60.34 70.0
3" 80 1.5 40
2A 1.3 34.0 3.47 7.21 11.20 15.38 19.69 24.06 28.45 31.99 35.66 42.0
3A 1.0 25.0 2.17 4.47 6.86 9.32 11.81 14.29 16.73 19.08 21.29 25.0
FC 3.6 91.5 12.67 27.12 47.27 66.04 85.99 106.88 127.85 147.47 167.93 190.0
1A 2.4 60.0 7.32 15.77 25.33 36.43 51.05 63.30 75.78 88.32 103.94 120.0
4" 100 1.5 40
2A 1.7 43.0 7.02 13.84 20.64 27.41 34.07 43.44 50.85 57.09 63.09 72.0
3A 1.3 32.0 4.03 8.16 12.45 16.82 21.18 25.44 29.51 33.31 37.67 42.0
FC 4.5 115.0 28.43 57.15 86.05 112.26 136.07 159.16 181.59 212.57 263.12 295.0
1A 3.0 75.0 16.09 32.01 47.67 63.09 78.18 93.11 105.76 117.42 137.91 165.0
6" 150 2.4 60
2A 1.8 46.5 8.78 17.43 25.90 34.15 42.13 49.78 57.07 63.94 71.49 85.0
3A 1.4 35.5 4.32 9.07 14.14 19.45 24.88 30.32 35.64 40.72 45.42 50.0

TECHNICAL BULLETIN 1/19 7

 METSO 4 GV 21 EN

ANSI Class: 150# ~ 1500#

Size: 1/2" ~ 6" Flow Characteristic: EQ%
Valve Travel [%] 10 20 30 40 50 60 70 80 90 100
FL 0.93 0.93 0.93 0.93 0.93 0.92 0.92 0.91 0.91 0.90
Valve Size Orifice Dia. Travel
Rated Cv
Inch mm Sign Inch mm Inch mm
FC 0.6 15.7 0.16 0.36 0.56 0.89 1.38 2.16 3.42 4.84 6.44 7.0
1A 0.4 11.0 0.06 0.16 0.31 0.49 0.78 1.46 2.17 2.88 3.53 4.0
2A 0.3 8.0 0.08 0.16 0.23 0.34 0.59 0.94 1.37 1.70 2.01 2.3
1/2" 15 3A 0.3 6.4 0.8 20 0.05 0.09 0.14 0.20 0.35 0.56 0.82 1.11 1.33 1.5
4A 0.3 6.4 0.02 0.04 0.06 0.08 0.16 0.28 0.41 0.54 0.66 0.8
5A 0.3 6.4 0.01 0.02 0.04 0.05 0.10 0.17 0.25 0.33 0.41 0.5
6A 0.3 6.4 0.01 0.01 0.02 0.03 0.06 0.11 0.15 0.20 0.25 0.3
FC 0.7 17.2 0.24 0.45 0.67 1.07 1.85 2.93 4.02 5.23 7.13 9.0
1A 0.5 13.0 0.06 0.20 0.40 0.67 1.11 1.79 2.79 3.71 4.74 5.5
2A 0.4 9.0 0.05 0.17 0.28 0.45 0.78 1.20 1.80 2.35 2.72 3.0
3/4" 20 3A 0.3 7.2 0.8 20 0.04 0.09 0.15 0.21 0.41 0.68 1.00 1.30 1.67 2.0
4A 0.3 6.4 0.03 0.06 0.09 0.13 0.25 0.42 0.62 0.82 1.01 1.2
5A 0.3 6.4 0.01 0.03 0.05 0.08 0.14 0.23 0.34 0.45 0.58 0.7
6A 0.3 6.4 0.01 0.02 0.03 0.04 0.08 0.14 0.21 0.27 0.33 0.4
FC 0.9 22.3 0.27 0.57 0.91 1.55 2.75 4.66 7.08 9.49 11.63 13.5
1A 0.6 15.0 0.12 0.29 0.51 0.83 1.56 2.70 4.14 5.61 7.03 8.5
2A 0.5 11.5 0.07 0.19 0.33 0.53 0.97 1.67 2.65 3.59 4.37 5.4
1" 25 3A 0.4 9.0 0.8 20 0.03 0.09 0.19 0.32 0.58 1.00 1.52 2.05 2.54 3.1
4A 0.3 7.2 0.03 0.08 0.13 0.22 0.40 0.67 1.00 1.35 1.70 2.0
5A 0.3 6.4 0.03 0.05 0.08 0.13 0.25 0.43 0.64 0.85 1.06 1.2
6A 0.3 6.4 0.01 0.03 0.04 0.07 0.14 0.24 0.35 0.46 0.59 0.8
FC 1.2 30.0 0.45 1.12 2.00 3.07 5.91 10.57 16.18 21.57 25.66 28.0
1A 0.8 21.5 0.23 0.58 1.06 1.69 3.16 5.36 7.97 10.69 13.44 16.0
2A 0.6 16.0 0.20 0.44 0.71 1.02 1.88 3.25 4.93 6.71 8.59 10.5
1-1/2" 40 3A 0.5 12.5 0.8 20 0.09 0.22 0.40 0.62 1.13 2.02 3.17 4.26 5.21 6.0
4A 0.4 10.0 0.05 0.14 0.26 0.41 0.79 1.36 2.08 2.83 3.45 4.0
5A 0.3 7.0 0.03 0.08 0.13 0.21 0.39 0.69 1.07 1.43 1.74 2.2
6A 0.3 6.4 0.03 0.06 0.09 0.13 0.23 0.40 0.59 0.78 0.98 1.2
FC 1.7 43.9 1.21 2.46 3.31 5.12 9.42 16.83 26.55 36.59 44.52 49.0
1A 1.3 33.4 0.32 0.82 1.51 2.87 5.48 9.31 13.77 18.31 23.17 28.0
2" 50 0.8 20
2A 0.8 21.5 0.17 0.47 0.88 1.63 3.18 5.47 8.21 11.09 13.68 17.0
3A 0.6 16.0 0.15 0.37 0.66 1.02 1.89 3.29 5.01 6.71 8.41 10.0
FC 2.8 72.0 2.01 4.47 7.37 12.28 22.52 38.62 62.02 79.57 90.09 100.0
1A 1.9 47.0 1.00 2.51 4.50 6.96 12.95 23.65 36.15 47.82 58.70 70.0
3" 80 1.5 40
2A 1.3 34.0 0.73 1.61 2.64 3.95 7.53 13.57 21.26 28.97 34.99 42.0
3A 1.0 25.0 0.36 0.89 1.59 2.46 4.51 8.08 12.55 16.82 20.78 25.0
FC 3.6 91.5 2.90 6.72 11.48 17.16 29.35 56.26 86.65 120.90 153.84 190.0
1A 2.4 60.0 1.56 3.77 6.63 10.11 18.42 32.83 55.27 77.53 98.63 120.0
4" 100 1.5 40
2A 1.7 43.0 1.45 3.05 4.82 8.10 14.86 24.20 35.22 49.81 61.14 72.0
3A 1.3 32.0 0.88 1.82 2.84 4.44 8.42 14.38 21.12 27.79 34.17 42.0
FC 4.5 115.0 4.23 9.72 16.43 25.73 49.58 89.69 140.01 195.77 256.78 295.0
1A 3.0 75.0 2.83 6.73 11.68 17.72 31.53 53.90 883.75 113.11 140.55 165.0
6" 150 2.4 60
2A 1.8 46.5 1.36 3.61 6.68 10.62 17.82 28.66 42.88 57.38 71.53 85.0
3A 1.4 35.5 0.91 1.90 2.95 4.26 7.77 13.68 21.42 29.72 37.96 50.0
NOTE
cv: Valve flow coefficient
FL: Liquid pressure recovery factor
FC: Full Capacity 1A: 1-Step reduction 2A: 2-Step reduction
3A: 3-Step reduction 4A: 4-Step reduction 5A: 5-Step reduction
6A: 6-Step reduction"

8 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

Contoured Trim (with Tendril 1)

ANSI Class: 150# ~ 1500#
Valve Travel [%] 10 20 30 40 50 60 70 80 90 100
FL 0,95 0,95 0,95 0,94 0,94 0,94 0,93 0,93 0,91 0,91
Valve Size Orifice Dia. Travel
Rated Cv
Inch mm Sign Inch mm Inch mm
FT 0.6 15.7 0.53 1.27 1.95 2.66 3.38 4.09 4.76 5.51 6.67 7.0
1T 0.4 11.0 0.36 0.74 1.23 1.61 1.99 2.37 2.72 3.05 3.41 4.0
2T 0.3 8.0 0.28 0.53 0.79 1.07 1.32 1.52 1.71 1.88 2.03 2.3
1/2" 15 3T 0.3 6.4 0.8 20 0.19 0.36 0.52 0.67 0.82 0.97 1.15 1.28 1.38 1.5
4T 0.3 6.4 0.09 0.17 0.25 0.32 0.40 0.47 0.54 0.61 0.68 0.8
5T 0.3 6.4 0.06 0.11 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.5
6T 0.3 6.4 0.04 0.07 0.10 0.12 0.15 0.18 0.21 0.24 0.27 0.3
FT 0.7 17.2 0.85 1.68 2.57 3.31 4.04 4.74 5.43 6.18 7.61 9.0
1T 0.5 13.0 0.35 0.82 1.40 2.17 2.78 3.39 3.98 4.53 5.03 5.5
2T 0.4 9.0 0.29 0.74 1.08 1.40 1.73 2.13 2.37 2.60 2.80 3.0
3/4" 20 3T 0.3 7.2 0.8 20 0.24 0.44 0.63 0.81 0.99 1.16 1.32 1.47 1.62 2.0
4T 0.3 6.4 0.13 0.24 0.36 0.48 0.60 0.72 0.84 0.96 1.08 1.2
5T 0.3 6.4 0.08 0.15 0.22 0.28 0.35 0.42 0.49 0.56 0.63 0.7
6T 0.3 6.4 0.05 0.09 0.13 0.17 0.21 0.25 0.28 0.32 0.36 0.4
FT 0.9 22.3 1.29 2.62 4.02 5.42 6.83 8.13 8.90 10.25 11.93 13.5
1T 0.6 15.0 0.77 1.54 2.31 3.15 3.92 4.68 5.42 6.12 7.00 8.5
2T 0.5 11.5 0.46 0.94 1.43 1.94 2.46 3.02 3.52 4.00 4.44 5.4
1" 25 3T 0.4 9.0 0.8 20 0.28 0.56 0.86 1.16 1.47 1.77 2.07 2.36 2.66 3.1
4T 0.3 7.2 0.18 0.37 0.57 0.78 0.99 1.20 1.41 1.61 1.79 2.0
5T 0.3 6.4 0.11 0.23 0.35 0.47 0.59 0.71 0.83 0.95 1.07 1.2
6T 0.3 6.4 0.07 0.14 0.21 0.28 0.34 0.41 0.48 0.55 0.62 0.8
FT 1.2 30.0 2.64 5.38 8.46 11.77 15.22 18.77 21.56 24.09 26.50 28.0
1T 0.8 21.5 1.63 3.16 4.70 6.25 7.90 9.52 11.12 12.68 14.18 16.0
2T 0.6 16.0 0.95 1.89 2.86 3.86 4.88 5.88 6.90 7.92 8.86 10.5
1-1/2" 40 3T 0.5 12.5 0.8 20 0.57 1.13 1.72 2.33 2.96 3.58 4.19 4.78 5.33 6.0
4T 0.4 10.0 0.37 0.74 1.14 1.54 1.96 2.38 2.79 3.18 3.55 4.0
5T 0.3 7.0 0.19 0.38 0.57 0.78 0.99 1.19 1.40 1.60 1.78 2.2
6T 0.3 6.4 0.12 0.24 0.36 0.47 0.59 0.71 0.83 0.95 1.06 1.2
FT 1.7 43.9 4.13 9.24 14.48 19.71 25.09 30.56 35.97 40.01 44.64 49.0
1T 1.3 33.4 2.27 4.97 7.88 10.94 13.72 16.51 19.28 22.03 24.97 28.0
2" 50 0.8 20
2T 0.8 21.5 1.26 2.76 4.37 6.05 7.77 9.53 11.23 12.73 14.32 17.0
3T 0.6 16.0 0.82 1.78 2.80 3.86 4.93 5.98 7.01 7.98 8.89 10.0
FT 2.8 72.0 9.96 21.06 32.40 42.65 52.98 63.70 76.67 86.07 91.15 100.0
1T 1.9 47.0 5.35 11.64 18.74 26.58 33.66 40.46 47.18 53.74 60.34 70.0
3" 80 1.5 40
2T 1.3 34.0 3.47 7.21 11.20 15.38 19.69 24.06 28.45 31.99 35.66 42.0
3T 1.0 25.0 2.17 4.47 6.86 9.32 11.81 14.29 16.73 19.08 21.29 25.0
FT 3.6 91.5 12.67 27.12 47.27 66.04 85.99 106.88 127.85 147.47 167.93 190.0
1T 2.4 60.0 7.32 15.77 25.33 36.43 51.05 63.30 75.78 88.32 103.94 120.0
4" 100 1.5 40
2T 1.7 43.0 7.02 13.84 20.64 27.41 34.07 43.44 50.85 57.09 63.09 72.0
3T 1.3 32.0 4.03 8.16 12.45 16.82 21.18 25.44 29.51 33.31 37.67 42.0
NOTE
cv: Valve flow coefficient
FL: Liquid pressure recovery factor
FT: Full Capacity 1T:1-Step reduction
2T: 2-Step reduction 3T:3-Step reduction
4T: 4-Step reduction 5T:5-Step reduction
6T: 6-Step reduction

TECHNICAL BULLETIN 1/19 9

 METSO 4 GV 21 EN

GU, Valve dimensions and weights

DRILLING
Dia. Of Hole = F

D
Pitch Circle Dia. = G
No of Hole = H

c
C
neles
SIZE-RATING
ØE

MATERIAL
HEAT NO.

B
A EXT & CRY

150 #/ 300 #/ 600 #

Dimension Weight (kg)
(mm) A B C D E F G H (Approximte)
Size
(mm) 150# 300# 600# 150# 300# 600# STD EXT CRY COMMON 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600#
15 184 190 203 44.5 47.5 47.5 142 250 400 110 90 95 95 15.9 15.9 15.9 60.3 66.7 66.7 4 4 4 14 15 23
20 184 194 206 49 57.5 57.5 142 250 400 110 100 115 115 15.9 19.1 19.1 69.9 82.6 82.6 4 4 4 14 15 23
25 184 197 210 55 63 63 142 250 400 110 110 125 125 15.9 19.1 19.1 79.4 88.9 88.9 4 4 4 14 15 23
40 222 235 251 65 78 78 161 269 419 110 125 155 155 15.9 22.2 22.2 98.4 114.3 114.3 4 4 4 22 23 27
50 254 267 286 83 83 83 178 333 458 110 150 165 165 19.1 19.1 19.1 120.7 127 127 4 8 8 25 27 32
80 298 318 337 109 109 120 222 395 545 115 190 210 210 19.1 22.2 22.2 152.4 168.3 168.3 4 8 8 55 57 62
100 352 368 394 135 135 135 248 402 552 140 230 255 275 19.1 22.2 25.4 190.5 200 215.9 8 8 8 80 83 92
Dimension A B C D E F G H Weight (lbs)
(inch) (Approximte)
Size
150# 300# 600# 150# 300# 600# STD EXT CRY COMMON 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600# 150# 300# 600#
(inch)
1/2" 7.24 7.48 7.99 1.75 1.87 1.87 5.59 9.84 15.74 4.33 3.54 3.74 3.74 0.63 0.63 0.63 2.37 2.63 2.63 4 4 4 31 33 51
3/4" 7.24 7.64 8.11 1.93 2.26 2.26 5.59 9.84 15.74 4.33 3.94 4.53 4.53 0.63 0.75 0.75 2.75 3.25 3.25 4 4 4 31 33 51
1" 7.24 7.76 8.27 2.17 2.48 2.48 5.59 9.84 15.74 4.33 4.33 4.92 4.92 0.63 0.75 0.75 3.13 3.5 3.5 4 4 4 31 33 51
1-1/2" 8.74 9.25 9.88 2.56 3.07 3.07 6.34 10.59 16.49 4.33 4.92 6.1 6.1 0.63 0.87 0.87 3.87 4.5 4.5 4 4 4 49 51 60
2" 10 10.51 11.26 3.27 3.27 3.27 7.01 13.11 18.03 4.33 5.91 6.5 6.5 0.75 0.75 0.75 4.75 5 5 4 8 8 55 60 71
3" 11.73 12.52 13.27 4.29 4.29 4.72 8.74 15.55 21.45 4.53 7.48 8.27 8.27 0.75 0.87 0.87 6 6.63 6.63 4 8 8 121 126 137
4" 13.86 14.49 15.51 5.31 5.31 5.31 9.76 15.82 21.73 5.51 9.06 10.04 10.83 0.75 0.87 1 7.5 7.87 8.5 8 8 8 176 183 203
NOTE
P.C.D = Pitch Circle Diameter

900 #/ 1500 #
Dimension Weight (kg)
(mm) A B C D E F G H (Approximte)
Size 900# 1500#
900# 1500# STD EXT COMMON 900# 1500# 900# 1500# 900# 1500# 900# 1500# 900# 1500#
(mm)
15 292 292 78 78 236 330 150 120 120 22.2 22.2 82.6 82.6 4 4 60 60
20 292 292 78 78 236 330 150 130 130 22.2 22.2 88.9 88.9 4 4 60 60
25 292 292 82 82 236 330 150 150 150 25.4 25.4 101.6 101.6 4 4 60 60
40 333 333 100 100 240 380 150 180 180 28.5 28.5 123.8 123.8 4 4 63 63
50 375 375 113 113 240 380 225 215 215 25.4 25.4 165.1 165.1 8 8 67 67
80 441 460 142 142 322 430 225 240 265 25.4 31.7 190.5 203.2 8 8 150 163
Dimension Weight (lbs)
A B C D E F G H
(inch) (Approximte)
Size
900# 1500# 900# 1500# STD EXT COMMON 900# 1500# 900# 1500# 900# 1500# 900# 1500# 900# 1500#
(inch)
1/2" 11.5 11.5 3.07 3.07 9.29 13 5.9 4.72 4.72 0.87 0.87 3.25 3.25 4 4 132 132
3/4" 11.5 11.5 3.07 3.07 9.29 13 5.9 5.12 5.12 0.87 0.87 3.5 3.5 4 4 132 132
1" 11.5 11.5 3.23 3.23 9.29 13 5.9 5.91 5.91 1 1 4 4 4 4 132 132
1-1/2" 13.11 13.11 3.94 3.94 9.45 15 5.9 7.09 7.09 1.12 1.12 4.87 4.87 4 4 139 139
2" 14.76 14.76 4.45 4.45 9.45 15 8.86 8.46 8.46 1 1 6.5 6.5 8 8 148 148
3" 17.36 18.11 5.59 5.59 13.19 17 8.86 9.45 10.43 1 1.25 7.5 8 8 8 331 359
NOTE
P.C.D = Pitch Circle Diameter

10 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

VD Diaphragm actuators
Actuator dimensions

A2 A3
A2
Vent Cap
Vent Cap
Without Vent cap

Without Vent cap

With Vent Cap

With Vent Cap

Bhd
Bd

Bhr
Br

Brh
Bdh
VDD E VDD D VDD VDR
VDR E VDR D Side handwheel(25/29/37)
General spring High spring General spring

Dimension
(mm) Without handwheel With handwheel

Size Weight Weight

(mm) A2 Bd / Bhd Br / Bhr A2 A3 Bdh Brh
(kg) (kg)
VD_25 E 255 348 373 12 255 312 110 170 23
VD_25 D 255 373 395 17
VD_29 E 295 391 416 18 295 312 122 182 29
VD_29 D 295 431 453 26
VD_37 E 375 464 489 28 375 352 131 211 43
VD_37 D 375 514 535 46

Dimension
(inch) Without handwheel With handwheel

Size Weight Weight

A2 Bd / Bhd Br / Bhr A2 A3 Bdh Brh
(inch) (lbs) (lbs)
VD_25 E 10 14 15 26 10 12 4 7 51
VD_25 D 10 15 16 37
VD_29 E 12 15 16 40 12 12 5 7 64
VD_29 D 12 17 18 57
VD_37 E 15 18 19 62 15 14 5 8 95
VD_37 D 15 20 21 101

TECHNICAL BULLETIN 1/19 11

 METSO 4 GV 21 EN

Cdh

Crh
Bdh

Brh
Top side handwheel(VDD48/55) Top side handwheel(VDR48/55)

Dimension
(mm) Without handwheel With handwheel

Size Weight Weight

(mm) A2 Bd / Bhd Br / Bhr Bdh Brh Cdh Crh
(kg) (kg)
VD_48 E 486 652 677 86 896 865 1102 1072 112
VD_48 D 486 702 724 118
VD_55 E 566 695 720 112 940 910 1145 1115 145
VD_55 D 566 745 767 152

Dimension
(inch) Without handwheel With handwheel

Size Weight Weight

(inch) A2 Bd / Bhd Br / Bhr Bdh Brh Cdh Crh
(lbs) (lbs)
VD_48 E 19 26 27 190 35 34 43 42 247
VD_48 D 19 28 29 260
VD_55 E 22 27 28 247 37 36 45 44 320
VD_55 D 22 29 30 335
NOTE
1. "E" refers to Spring range 0.8~2.6
2. "D" refers to Spring range 1.5~3.4
3. "Br / Bhr" refers to reverse acting actuator, VDR E / D
4. "Bd / Bhd" refers to direct acting actuator, VDD E / D
5. "Cdh / Crh" Top side handwheel actuator, VD_48/55

12 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

Actuator dimensions
VC cylinder actuators without handwheel

A B ØC

ØC

B2
B1

VC, without volume chamber VC, with volume chamber

VC actuators without handwheel

#30 #40 #50 #60 #70 #80
Stroke ØC 370 ØC 460 ØC 560 Stroke ØC 660 ØC 710 ØC 820
(mm) B1 Weight(kg) B1 Weight(kg) B1 Weight(kg) (mm) B1 Weight(kg) B1 Weight(kg) B1 Weight(kg)
B2 A B B2 A B B2 A B B2 A B B2 A B B2 A B
640 810 810 954 955 954
40 92 115 120 148 186 234 100 255 344 322 438 378 519
760 935 935 1199 1203 1207
650 820 820 974 975 974
50 94 118 123 152 189 237 120 262 355 330 450 386 531
790 965 965 1259 1263 1267
660 830 830 994 995 994
60 97 121 126 155 192 242 140 269 365 338 461 394 543
820 995 995 1319 1323 1327
670 840 840 1034 1035 1034
70 100 124 128 159 195 246 180 283 386 354 484 410 567
850 1025 1025 1439 1443 1447
680 850 850 1094 1095 1094
80 103 127 131 162 198 251 240 303 417 377 518 435 604
880 1055 1055 1619 1623 1627
690 860 860 1134
90 106 130 134 166 201 256 280 451 628
910 1085 1085 1747
700 870 870
100 108 133 137 173 203 261
940 1115 1115
720 890 890
120 114 139 142 177 209 270
1000 1175 1175
910 910
140 148 184 215 279
1235 1235
950 950
180 159 198 227 298
1355 1355

VC actuators without handwheel

#30 #40 #50 #60 #70 #80
Stroke ØC 15 ØC 18 ØC 22 Stroke ØC 26 ØC 28 ØC 32
(mm) B1 Weight(lbs) B1 Weight(lbs) B1 Weight(lbs) (mm) B1 Weight(lbs) B1 Weight(lbs) B1 Weight(lbs)
B2 A B B2 A B B2 A B B2 A B B2 A B B2 A B
25 32 32 38 38 37
40 203 254 265 326 410 516 100 562 758 710 966 833 1144
30 37 37 47 47 48
26 32 32 38 38 38
50 207 260 271 335 417 522 120 578 783 728 992 851 1171
31 38 38 50 50 50
26 33 33 39 39 39
60 214 267 278 342 423 534 140 593 805 745 1016 869 1197
32 39 39 52 52 52
26 33 33 41 41 41
70 220 273 282 351 430 542 180 624 851 780 1067 904 1250
33 40 40 57 57 57
27 33 33 43 43 43
80 227 280 289 357 437 553 240 668 919 831 1142 959 1332
35 42 42 64 64 64
27 34 34 45
90 234 287 295 366 443 564 280 994 1385
36 43 43 69
28 34 34
100 238 293 302 381 448 575
37 44 44
28 35 35
120 251 306 313 390 461 595
39 46 46
36 36
140 326 406 474 615
49 49
37 37
180 351 437 500 657
53 53

TECHNICAL BULLETIN 1/19 13

 METSO 4 GV 21 EN

Actuator dimensions
VC cylinder actuators with handwheel

A B ØC
ØC

B2
B1

VC, with optional handwheel VC, with optional handwheel

& volume chamber

VC actuators with handwheel

#30 #40 #50 #60 #70 #80
Stroke ØC 370 ØC 460 ØC 560 Stroke ØC 660 ØC 710 ØC 820
(mm) B1 Weight(kg) B1 Weight(kg) B1 Weight(kg) (mm) B1 Weight(kg) B1 Weight(kg) B1 Weight(kg)
B2 A B B2 A B B2 A B B2 A B B2 A B B2 A B
930 1095 1095 1239 1240 1289
40 134 157 180 208 246 294 100 315 404 368 502 438 579
1055 1220 1220 1484 1488 1542
940 1105 1105 1259 1260 1309
50 137 160 183 212 249 299 120 322 415 376 514 446 591
1085 1250 1250 1544 1548 1602
950 1115 1115 1279 1280 1329
60 139 163 186 215 252 303 140 329 425 384 525 454 603
1115 1280 1280 1604 1608 1662
960 1125 1125 1319 1320 1369
70 142 167 188 219 255 308 180 343 446 400 548 470 627
1145 1310 1310 1724 1728 1782
970 1135 1135 1379 1380 1429
80 144 170 191 222 258 313 240 363 477 423 582 495 664
1175 1340 1340 1904 1908 1962
980 1145 1145 1469
90 147 173 194 226 261 318 280 511 688
1205 1370 1370 2082
990 1155 1155
100 150 176 197 230 263 322
1235 1400 1400
1010 1175 1175
120 155 183 202 237 269 332
1295 1460 1460
1195 1195
140 208 244 275 341
1520 1520
1235 1235
180 219 258 287 360
1640 1640

VC actuators with handwheel

#30 #40 #50 #60 #70 #80
Stroke ØC 15 ØC 18 ØC 22 Stroke ØC 26 ØC 28 ØC 32
(mm) B1 Weight(lbs) B1 Weight(lbs) B1 Weight(lbs) (mm) B1 Weight(lbs) B1 Weight(lbs) B1 Weight(lbs)
B2 A B B2 A B B2 A B B2 A B B2 A B B2 A B
37 43 43 49 49 51
40 295 346 397 459 542 648 100 694 891 811 1107 966 1276
42 48 48 58 58 61
37 44 44 50 50 52
50 302 353 403 467 549 659 120 710 915 829 1133 983 1303
43 49 49 61 61 63
37 44 44 50 50 52
60 306 359 410 474 556 668 140 725 937 847 1157 1001 1329
44 50 50 63 63 65
38 44 44 52 52 54
70 313 368 414 483 562 679 180 756 983 882 1208 1036 1382
45 52 52 68 68 70
38 45 45 54 54 56
80 317 375 421 489 569 690 240 800 1052 933 1283 1091 1464
46 53 53 75 75 77
39 45 45 58
90 324 381 428 498 575 701 280 1127 1517
47 54 54 82
39 45 45
100 331 388 434 507 580 710
49 55 55
40 46 46
120 342 403 445 522 593 732
51 57 57
47 47
140 459 538 606 752
60 60
49 49
180 483 569 633 794
65 65

14 TECHNICAL BULLETIN 1/19

4 GV 21 EN S E R I E S G U C O N T R O L VA LV E S G L O B E - S I N G L E S E AT E D , T O P G U I D E D

HOW TO ORDER
Globe unbalanced, Top guided type, series GU
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
GU 01 C W A J2 B P1 X BC S1 R1 X S G X S A X A E FC

VALVE CONSTRUCTIONS
1. VALVE SERIES 9. PLUG APPLICATION
GU Globe unbalanced, Top guided type X Not applicable
A Cobalt based alloy
2. BODY SIZE
Optional plug material
0H 0.5" / DN 15 3Q 0.75" / DN 20
Y Special
01 1" / DN 25 1H 1-1/2" / DN 40
02 2" / DN 50 03 3" / DN 80 STEM MATERIAL
04 4" / DN 100 10.
Material Description
Optional body size BC 630 SS + HCr General for carbon steel valve
06 6" / DN 150 YY Special TC 316 SS + HCr General for stainless steel valve
Optional stem material
3. PRESSURE RATING FC 316L SS + HCr
C ASME class 150 D ASME class 300 YY Special Special materials
F ASME class 600 K EN PN 16
11. SEAT TYPE
M EN PN 40 S1 Single metal seat
Optional pressure rating T1 Single soft seat
G ASME class 900 H ASME class 1500 Optional seat type
I ASME class 2500 N EN PN 63 YY Special
P EN PN 100 B EN PN 160
E EN PN 250 Y Special SEAT / RETAINER MATERIAL
12.
- K: available for DN50-DN150- M: available for DN50-DN150 Seat Retainer Guide bushing
R1 CA15 / 410 SS CB7Cu-1 / 630 SS AISI 440C
4. END CONNECTION T6 CF8M / 316 SS CF8M / 316 SS AISI 316 + Alloy 6
W Flanged RF, ASME B16.5 V6 Alloy 6 CF8M / 316 SS AISI 316 + Alloy 6
C Flanged RF, EN 1092-1 Optional Seat / Retainer Material
V Socket welding, ASME B16.11 R2 420J2 SS CB7Cu-1 / 630 SS AISI 440C
Q Butt welding, ASME B16.25 V6 316 SS 316 SS AISI 316 + Alloy 6
Optional end connection YY Special Special Special
Z Ring joint flange, ASME B16.5 - AISI 410 is general for carbon steel valve.
- AISI 316 is general for stainless steel valve.
Y Special

BONNET CONSTRUCTION 13. SEAT APPLICATION

5. X Not applicable
Bonnet type Actuator connection
A General Applicable for VD_25/29/37 A Cobalt based alloy
B General Applicable for VD_48/55 P Insert PTFE
E Extension Applicable for VD_25/29/37 Q Insert PTFE + Cobalt based alloy
F Extension Applicable for VD_48/55 Optional seat application
P Cryogenic Applicable for VD_25/29/37 Y Special
Q Cryogenic Applicable for VD_48/55
OTHERS
Optional bonnet construction
J Bellows seals Applicable for VD_25/29/37 14. PACKING / BELLOWS TYPE
K Bellows seals Applicable for VD_48/55 S General packing
Y Special Special E Low emission, Live loaded
Optional Packing / Bellows Type
6. BODY MATERIAL C Bellows Seal (304 SS, Formed)
J2 A216 gr. WCB Y Special
S6 A351 gr. CF8M
15. PACKING MATERIAL
Optional body material
G PTFE + Carbon fiber
S1 A351 gr. CF3M
F Graphite
YY Special
T PTFE V-Ring
- Bonnet material is equivalent with Body material. Optional packing material
7. MODEL CODE H Hi-Graphite
B Model B Y Special
TRIM CONSTRUCTIONS 16. SEAL RING MATERIAL
PLUG MATERIAL X Not applicable
8.
Material Description
P1 410 SS General for carbon steel valve 17. GASKET MATERIAL
T6 316 SS General for stainless steel valve S S/W gasket type, 316L SS + Graphite for general
VM Alloy 6 Use for small Cv and Micro plug L S/W gasket type, 316L SS + PTFE
Optional plug material Optional gasket material
S1 316L SS H S/W gasket type, 316L SS + Graphite for high temp.
YY Special Special materials Y Special

TECHNICAL BULLETIN 1/19 15

 18. STUD / NUT MATERIAL 19. OPTIONS
A A193 gr. B7 / A194 gr. 2H X Not applicable
B A193 gr. B8 / A194 gr. 8 E Anti-erosion
K A320 gr. B8M cl. 2 / A194 gr. 8M Special options
Optional stud / Nut material L Lub. & Isol. valve
H A193 gr. B16 / A194 gr. 4 W Water seal
Y Special Y Special
* Face to face length according to ISA 75.08
* The body, bonnet, trim materials are subject to change as equivalent depending on detail design.
* Please see 'Neles Globe Typecode Instruction' for further options.

TRIM TYPE & RATED Cv

20. 21. 22. RATED Cv
TRIM BODY SIZE AND STROKE
TRIM TYPE
Sign Sign CHARACTERISTIC Sign DESCRIPTION 1-
1/2" Str. 3/4" Str. 1" Str. Str. 2" Str. 3" Str. 4" Str. 6" Str.
1/2"
A General plug type L Linear FC Full capacity 7 (20) 9 (20) 13.5 (20) 28 (20) 49 (20) 100 (40) 190 (40) 295 (60)
E Equal % 1A 1-Step reduction 4 (20) 5.5 (20) 8.5 (20) 16 (20) 28 (20) 70 (40) 120 (40) 165 (60)
2A 2-Step reduction 2.3 (20) 3 (20) 5.4 (20) 10.5 (20) 17 (20) 42 (40) 72 (40) 85 (60)
3A 3-Step reduction 1.5 (20) 2 (20) 3.1 (20) 6 (20) 10 (20) 25 (40) 42 (40) 50 (60)
4A 4-Step reduction 0.8 (20) 1.2 (20) 2 (20) 4 (20)
5A 5-Step reduction 0.5 (20) 0.7 (20) 1.2 (20) 2.2 (20)
6A 6-Step reduction 0.3 (20) 0.4 (20) 0.8 (20) 1.2 (20)

FT Tendril
1 /
L Linear 7 (20) 9 (20) 13.5 (20) 28 (20) 49 (20) 100 (40) 190 (40)
Full capacity

1T Tendril
1 /
E Equal % 4 (20) 5.5 (20) 8.5 (20) 16 (20) 28 (20) 70 (40) 120 (40)
1-Step reduction

2T Tendril
1 /
2.3 (20) 3 (20) 5.4 (20) 10.5 (20) 17 (20) 42 (40) 72 (40)
2-Step reduction

3T Tendril
1 /
1.5 (20) 2 (20) 3.1 (20) 6 (20) 10 (20) 25 (40) 42 (40)
3-Step reduction
Tendril 1 /
4T 4-Step reduction 0.8 (20) 1.2 (20) 2 (20) 4 (20)

5T Tendril 1 / 0.5 (20) 0.7 (20) 1.2 (20) 2.2 (20)

5-Step reduction
Tendril 1 /
6T 6-Step reduction 0.3 (20) 0.4 (20) 0.8 (20) 1.2 (20)

C Micro plug type L Linear FC Full capacity 0.1 (20) 0.1 (20) 0.1 (20)
1A 1-Step reduction 0.06 (20) 0.06 (20) 0.06 (20)
2A 2-Step reduction 0.03 (20) 0.03 (20) 0.03 (20)
3A 3-Step reduction 0.01 (20) 0.01 (20) 0.01 (20)
4A 4-Step reduction 0.006 (20) 0.006 (15) 0.006 (20)
5A 5-Step reduction 0.003 (20) 0.003 (15) 0.003 (20)
Y Special Y Special YY Special Contact Metso Korea for Cv details
* Rated Cv is separeted depending on the trim type & trim characteristic.
* Optional rated Cv to meet to specific Cv are available.
* (Str) is the valve stroke.
* For trims without the specified Cv values, please contact Metso Korea.

Metso Corporation Subject to change without prior notice. Product names in this
bulletin are all trademarks of Metso Flow Control Inc.
Töölönlahdenkatu 2, PO Box 1220, 00100 Helsinki, Finland
Tel. +358 20 484 100
http://contact.metso.com/

Metso Flow Control Inc.

Vanha Porvoontie 229, P.O. Box 304, FI-01301 Vantaa, Finland.
Tel. +358 20 483 150. Fax +358 20 483 151

www.metso.com/valves