2015 CE CATALOG.

indd 1 11/21/14 9:37 PM

 TABLE OF CONTENTS

A-arm kit 11 Fuel cells and mounts 24

Aluminum kits, ladder bar and four link 30 Ladder bars and suspension kits 3-4
Angle finders 15 Linkage, door latch 26
Anti roll bars 9 Master cylinders 29
Axles, Bearings and studs 38-39 Motor plates, mid plates and mounts 22
Battery mounts 29 Nitrous bottle mounts 24
Body mounts 25-26 Parachutes, mounts and accessories 19, 27
Brake kits 28 Pedals and components 28
Brake plumbing 28-29 Rack and pinions and mounts 20
Brake system components 38 Rear end housings and components 34
Cages and components 14 Rear ends complete 35
Chassis kits 12 Rod ends 41
Chassis tuning manuals, computer programs 46 Roll bars and components 14-15
Chromoly tubing and plate 41 Shifter mount 23
Clevis, weld-in 41 Shocks, tools and accessories 16-18
Cooling system components 25 Springs, coil over 18
Dashboards 31 Steering components 20-21
Diagonal links 8 Struts, mounts and accessories 10
Door hinge kits 26 Swing out door kits 15
Door panels 31 Tabs and hardware 42-45
Drive shafts and yokes 37 Third members 36
Driveshaft loops 18 Transmission mounts 23
Panel fasteners, plates and accessories 33 Tube adaptors 41
Electrical 29 Tubing 41
Gauge panels 29 Wheelie bars and components 9
Housing ends 34 Window nets and mounts 19
Four link kits and suspension kits 6-7 Window frame mounts 26
Frame rails 13 Wing kits 32
Frame connectors 13 Wishbone locator 8
Front end mounts 25 Wheel tubs 32

1500 Avenue R, Riviera Beach, FL 33404

Copyright ©, CHASSIS ENGINEERING, All rights reserved 2015-2016
Prices subject to change

2 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 2 11/21/14 9:37 PM

 LADDER BARS

7 Good Reasons Why Chassis Engineering Pro Bars

Belong On Your Car...
1. Lifetime Limited Warranty
2. Bottom Mount Adjuster Link
3. Complete With Safety Brackets
# 3607 shown
4. Heavy Duty 1.0” x .156” Wall Dom Steel Tubing
5. 1/4” Precision Laser Cut Brackets
6. Spherical Front Rod Ends
7. Bracket Boxing Strips

32” Double Adjustable PRO 1 Ladder Bars

If you’re looking for a race quality traction device–look no further than the proven
Chassis Engineering Pro 1 Ladder Bars. Ladder bar rear suspensions are simple,
effective and economical.
Bracket Boxing Strips Optional shock mounts brackets
Easily installed and tuned for maximum traction, ladder bars can be installed
on virtually any car with tremendous results. As with most of our suspension
components, our ladder bars carry the Chassis Engineering lifetime limited
warranty!
PART# DESCRIPTION
3607 32” Double Adjustable Pro 1 Ladder Bar $299.95 pr
3605 32” Double Adjustable Ladder Bar With Coil Over Mounts & 360º Brackets (Shown) $319.95 pr
3721 Adjustable Mount Kit For 3609 $ 34.95 pr

“Triple” Adjustable Ladder Bars

The Outlaw triple adjustable ladder bar adds adjustment
capabilities for the racer that needs every tuning advantage
and extra strength for the heavy, high horsepower racecar. The
Outlaw allows adjustment of the I.C. height, pinion angle and
overall leverage. The frame brackets allow 5 instant center
Shown with optional
height adjustments. The Lower holes in the housing brackets shock mounts brackets
allow for lower bar angle adjustment and the upper holes create
the leverage produced by the system.

Features:
• 1-3/8” x .095” Moly Upper and Lower Bars
• 3/4” X 3/4” Moly Rod Ends, Front Mounts
• 3/4” x 5/8” Solid Rod Eyes, Rear Mounts
• 1/4” Laser Cut Housing
• Integral Shock Mount Holes
• Bracket Boxing Strips

Available in kit form to make the install length up to 36” long. The front of the
upper and lower bars are factory jig welded. You weld the rear tube adapters
in once the correct length has been determined for your application.

PART# DESCRIPTION
3606 Outlaw Adjustable Ladder Bar $499.95 pr
3606A 36” Outlaw Adjustable Ladder Bar Weld-up Kit $474.95 pr
3721 Shock Mount Brackets For 3606 $ 34.95 pr

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 3

2015 CE CATALOG.indd 3 11/21/14 9:37 PM

 LADDER BAR PACKAGES

1-3/4” round cross member (specify 45” or 60”)

STAGE I Ladder Bar Kit or 2” x 3” x .083 or .120 wall box cross member

Available for standard 3”, 3 1/4” and

Chassis Engineering has the right package 3 1/2” axle tubes
to meet your needs and application. We’ve
grouped our most popular suspension
components to create suspension packages
matched in performance and value. From
daily drivers to all out race cars we’ve got a
package that’s perfect for your project and
your budget.

Kit Includes:
• Adjustable Pro 1 Ladder Bars
• Ladder Bar Cross Member and Brackets
• Diagonal Link
• Housing Brackets, 1/4” thick
• Bracket Boxing Strips
• Hardware and Detailed Instructions

PART# DESCRIPTION
3627 Stage l Ladder Bar Suspension with 1-3/4” round cross member (pictured) $442.40
3635 Stage l Ladder Bar Suspension with 2” x 3” box cross member $477.90
Add $20.00 for panhard bar
Add $20.00 for 360º brackets with shock mounts
Optional shock mounts brackets

STAGE II Ladder Bar Suspension With Shocks and Springs

Kit Includes:
• Adjustable Pro 1 Ladder Bars
• Ladder Bar Cross Member and Brackets
(Specify 45” or 60”)
• Diagonal Link
• Housing Brackets, 1/4” thick
• Bracket Boxing Strips
• Shocks
• Springs
• Upper Shock
Cross Member
• Lower Adjustable
Shock Mounts
• Hardware and
Detailed Instructions

Shown with optional 360

brackets with shock mounts

PART# DESCRIPTION
3634 Stage II Ladder Bar Suspension with Strange Aluminum Coil Overs $947.30
3633 Stage II Ladder Bar Suspension with Coil Spring Mounts
(C/E 5076), Springs & Shocks (See pg. 17 ) $734.85
Add $35.45 for 2” x 3” cross member, specify wall thickness (.083 or .120)
Add $20.00 for 360º Brackets with Shock Mounts (Pictured)
(Orders must specify spring rate)

4 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 4 11/21/14 9:37 PM

 SUBFRAME KITS

Take the guess work out of chassis setup

with performance matched Subframe and
Suspension Kits!
STAGE III Ladder Bar Suspension
and Subframe
NOTE: Installation of
This top of the line ladder bar subframe and a sub-frame requires
suspension package has been available from us the use of a roll bar or
for years! It’s hard to beat the adjustable design that roll cage to maintain
allows for even the largest of tires. Stage III is available chassis rigidity.
in kit form or fully welded to fit your application. Chassis
Engineering also has the wheel tubs, fuel cells, dual battery
mounts as well as the rest of the components to finish off
Sub-Frame Installation
your back half for complete success!
DVD
Kit Includes: PART# 9001 $19.95
• Mandrel Bent 2 x 3 x .083 or .120 Frame Rails
• Adjustable Pro Ladder Bars
• 2 x 3 Ladder Bar Cross Member and Brackets PART# DESCRIPTION
• Diagonal Link 3628 Complete Ladder Bar Sub-Frame with
• Housing Brackets Strange All Aluminum Coil Overs (unwelded) $1,296.90
• Bracket Boxing Strips 3630 Complete Ladder Bar Sub-Frame with
Coil Spring (C/E 5076), Springs & Shocks (unwelded) $1,049.95
• Shocks 3728 Sub-Frame For Compact Cars $1,234.50
• Springs See Page 7 Related Components
• Upper Shock Cross Member 9001 Sub-Frame Installation DVD, (Included with the purchase of kit) $ 19.95
• Lower Adjustable Shock Mounts
• Hardware and Detailed Instructions

Housing floaters...take the bind out of leaf

Ladder Bar
spring suspensions.
Adjusters You’ll absolutely need a set of housing floaters if your car has a
Build your own ladder
leaf spring rear suspension and you are installing ladder bars or
bars or convert your old
a 4-link. Chassis Engineering “Floaters” allow the ladder bars or
LOWER ADJUSTER LINK non-adjusting ladder bars
(Standard) 4-link and springs to work together. Floaters also allow 4” of ride
to adjustable by simply
height adjustment.
adding our adjuster kit.
Contains two adjusters with # 3740 PART# DESCRIPTION
3/4” thread, jam nuts and 3740 Housing Floaters (pair) $84.95
wrench flats.
Ladder Bar Crossmembers
Ladder bar crossmembers not only provide
Ladder Bar Safety the front ladder bar mounting point they also
Brackets serve as a driveshaft safety
Some kind of front retaining loop and significantly add to # 3718
device is required on ladder chassis stiffness. Our profiled,
bars by all sanctioning five hole front brackets provide
ROD END SAFETY BRACKETS bodies. Our simple kit will
(Standard)
the adjustability you need to dial in the
make you legal and give you correct ladder bar angle. Round tube cross
peace of mind. Kit includes members are made from 1-3/4” x .134” wall
all necessary brackets and mild steel and rectangular cross
hardware to add safety members are made from 2” x # 3819
retainers to any ladder bar. 3” x .083” and 2” x 3” x .120” Ladder Bar Cross
mild steel.
Member Bolt Kit
PART# DESCRIPTION
PART# DESCRIPTION 3718 Ladder Bar Cross member, round 45” $62.50
3610 Ladder Bar Adjusters $27.50 3719 Ladder Bar Cross member, round 60” $62.50
3612 Ladder Bar Safety Brackets $29.50 3819 Ladder Bar Cross member, 2” x 3” x .083”, 60” $97.95
3636 Front Ladder Bar Bolt Kit $ 7.75 3818 Ladder Bar Cross member, 2” x 3” x .120”, 60” $97.95 3636 $7.75

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 5

2015 CE CATALOG.indd 5 11/21/14 9:37 PM

 FOUR-LINKS

Chassis Engineering Has the Four-Link for you...

# 3315

# 3514 # 3515

Top Gun XTR Series

Introducing the Top Gun “XTR” series four-link. Based
on the extremely popular Top Gun four-link, the XTR
Heavy Duty Pro Four Link Kits Top Gun Four-Link Kits series goes to the next level of performance and
Designed to handle even the toughest style of racing, Chassis Engineering’s Top Gun four-link is top of the adjustability. By utilizing 1/2” holes in the frame and
the Heavy Duty Pro system is the most economical line and ideal for all high horsepower applications housing brackets, the chassis can be tuned in even
of the four-links. Constructed from 1/4” thick from Super Classes to Sportsman. Constructed finer increments. Three distinct levels of the XTR series
steel plate with provisions for lateral support tube from 1/4” thick steel plate (chromoly optional) with makes selecting the right combination for your car a
and 3/4” rod ends, this system is tough. Housing provisions for lateral support tube, strength is not an snap.
brackets are available with or without adjustable issue. Housing brackets are available with or without • 1/4” thick mild steel or chromoly laser cut
shock mount bracket holes. Four-link tubes are adjustable shock mount bracket holes. Designed frame & housing brackets
thick wall and directly threaded. for 5/8” rod ends allows for tighter hole spacing that • 1/2” four-link holes - finer adjustments
offers more I.C. points. Four-Link tubes are chromoly • Fixed shock mounts - greater strength
• 1” x .156” wall directly threaded 4-link tubes
with weld in chromoly tube adapters. • Chromoly upper and lower four-link tubes
• Laser cut 1/4” thick frame & housing brackets
• 3/4” x 1/2” hole Chromoly rod ends
• Housing bracket boxing strips • Laser cut 1/4” mild steel or chromoly frame &
• 1/2” Bolts, nuts and washers
• 1-3/8” housing bracket lateral support tube housing brackets
• 1-3/8” housing bracket lateral support tube
• Built-In wrench flats for easy adjustments • 1-1/4” x .095” chromoly upper tubes
• Bracket boxing strips
• 1-3/8” x .095” chromoly lower tubes
PART# DESCRIPTION • Chromoly tube adapters 3314 Mild steel brackets, 1” DOM threaded upper &
3513 Heavy-Duty Pro Four-Link Kit w/o Shock Mounts
• Housing bracket boxing strips lower four-link tubes, heat treated rod ends
3/4” Holes $299.95
• 1-3/8” housing bracket lateral support tube $569.95
3514 Heavy-Duty Pro Four-Link Kit with Shock Mounts • Built-In wrench flats for easy adjustments
3315 Mild steel brackets, chromoly upper &
3/4” Holes $324.95
3505 Top Gun Four-Link Kit w/o shock Mt Bkts lower four-link tubes, chromoly tube adapters,
(Less Rod Ends) $405.50 chromoly rod ends, N.A.S. hardware
3721 Adjustable Shock Mount Kit for Four-Link Heavy
Tube size: 1 1/4 x 1 3/8 $835.95
Duty Pro $34.95
3515 Top Gun Four-Link Kit w/shock Mt Bkts
*Rod ends must be purchased separately (Less Rod Ends) $419.95 3316 Chromoly brackets, chromoly upper &
*Available in 3”, 3 1/4” and 3 1/2” axle tubes lower four-link tubes, chromoly tube adapters,
3516 Top Gun Four-Link With Chromoly Brackets (Less chromoly rod ends, N.A.S. hardware
Rod Ends) $549.95 Tube size: 1 1/4 x 1 3/8 $999.95

3721 Adjustable Shock Mt. Kit for Top Gun Four-Link *Rod ends must be purchased separately
$34.95 *Available in 3”, 3 1/4” and 3 1/2” axle tubes

*Rod ends must be purchased separately N.A.S. Bolt Kit

*Available in 3”, 3 1/4” and 3 1/2” axle tubes Superior strength is offered
3311 Top Gun Four-Link Bar Kit,1-1/4 with the extra-long shoulder.
and 1-3/8 Bars $141.50 1/2” Thread only – 8 Bolts, 8
3312 XTR Cromoly Four-Link Bar Kit, 1-3/8 Nuts and 16 Washers.
and 1-1/2 Bars $169.50 PART# DESCRIPTION
Rod ends must be purchased separately 3310 135.76

Four-Link Rod End Kits PART# DESCRIPTION

Consists of four left hand and four right hand 3501 Mild steel rod end kit $132.00
rod ends with jam nuts. 3502 Four mild steel and four 4130 Chromoly rod end kit $177.00
3503 4130 Chromoly three-piece rod end kit, 3/4” x 3/4” $412.00
3504 Teflon-lined street rod end kit $166.00
3506 3/4” x 5/8” Chromoly rod end kit (4 lft & 4 rt rod ends & jam nuts) $434.00
3507 4130 Chromoly two-piece rod end kit $222.00

6 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 6 11/21/14 9:37 PM

 FOUR-LINKS

“Ultimate II” Double Adjustable Four-Link

The best has been made even better! Based on the original Ultimate four-link this
new design makes adjustments easier and finer. This new design allows an incredible
amount of adjustments allowing for finer tuning for track conditions and tire size
changes. This fine tuning is made possible by removing the top, bottom or even both
frame brackets and flipping them over. Complete chromoly construction and tig welded
brackets make this system ultra strong.
• Laser cut – 1/4” chromoly brackets
• Large diameter upper & lower chromoly tubes
• Chromoly tube adapters
• Chromoly rod ends – 3/4” thread x 1/2” hole
• Chromoly bracket boxing strips PART# DESCRIPTION
• N.A.S. style– 1/2” bolts, nuts and washers 3317 Ultimate II Double Adjustable Four-Link $1,524.95

Four-Link Packages
Available for almost any application, these four-link packages are individually matched to
take the guesswork out of proper component selection. Pick the four
link of your choice – and we’ll deliver the proper rod ends, locator, Jerry Bickel’s
shocks and adjustable shock mounts! One great package at one Chassis Book
great price! Call the experts at Chassis Engineering! PART# 7501
$79.00
Kits Include:
• Four-link kit of your choice Sub-Frame
• 4130 chromoly rod ends Installation
• Upper shock cross member DVD
• Strange Engineering shocks PART# 9001
• Springs $19.95
• Bolt-on diagonal link
# 3512
• All hardware
• Adjustable shock mounts
• Bracket boxing strips

PART# DESCRIPTION Upgrade Options:

3511 Four-Link Kit with #3514 HEAVY-DUTY “PRO” FOUR-LINK $1,109.95 Double Adjustable Coil Overs add $253.00
3512 Four-Link Kit with #3515 TOP GUN FOUR-LINK (pictured) $1,488.80 Wishbone Locator Instead of Diagonal Link add $ 80.00
Panhard Bar Instead of Diagonal Link add $ 20.00

Four-Link Suspension and Subframe Kits

(Square & Round Tube)
Kit Includes:
• Mandrel bent 2” X 3” frame rails, .083” or .120”
• 1-3/4” x .134” round tube rails
• Four-link of your choice
• 1-3/4” or 1-5/8” x .083” chromoly rails
• 4130 chromoly rod ends # 3625
# 3626
• Drive shaft loop
• Bolt-On diagonal link
• Upper shock cross member NOTE: Installation of a sub-frame requires the use
• Adjustable lower shock mounts of a roll bar or roll cage to maintain chassis rigidity.
• Strange Engineering aluminum coil overs with springs Rear end housing not included

PART# DESCRIPTION Related Components:

3625 #3514 PRO Four-Link and 2” x 3”Sub-Frame with Fully Welded Sub-Frame add $150.00
Aluminum Single Adjustable Coil Overs (unwelded) $1,484.95 3761 Anti-roll bar (unwelded) add $329.95
3626 #3514 PRO Four-Link and Round Tube Sub-Frame with 3761 Anti-roll bar (welded) add $554.95
Aluminum Single Adjustable Coil Overs (unwelded) $1,390.50* Suspension Brackets Welded to 9” Ford (mild steel) add $390.00
3726 #3515 TOP Gun 2” x 3” Sub Frame (unwelded) $1,801.40 Suspension Brackets Welded to 9” Ford (Chromoly) add $520.00
3727 #3515 Top Gun Round Tube Sub Frame (unwelded) $1,729.95 * Suspension Brackets Welded to Dana 60 add $230.00
Chromoly kits available Double Adjustable Shocks add $253.00
Wishbone Locator (instead of diagonal link) add $ 80.00

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 7

2015 CE CATALOG.indd 7 11/21/14 9:37 PM

 LINKS AND BARS
Bolt-on Diagonal Link
Diagonal Links Our most popular and economical diagonal link. Made from 3/4” x .156” mild steel and is 35”
in length. Included are 1/2” misalignment spherical rod ends, complete mounting hardware and
Diagonal links eliminate the side to side instructions. Easily shortened to fit any application.
movement of the rear end by connecting
the lower front pivot of the ladder bar
or 4-link to the opposite side’s lower
rear pivot. Easily installed and threaded # 3748
left and right for precise alignment
adjustments. Recommended for coil
PART# DESCRIPTION
spring street and racing applications. 3748 Diagonal Link (5/8”-3/4” mounting holes / Ladder Bars) $79.95
3750 Diagonal Link (3/4”-3/4” mounting holes / Four-Link) $79.95

Heavy-duty Diagonal Link (weld on)

Extra strong for positively locating your housing in heavier, big power
applications. Made from 1.0” x .156” mild steel, 30” in length, includes
3/4” mild steel rod ends, mounting brackets, hardware and instructions.
PART# DESCRIPTION
3749 Heavy Duty Diagonal Link $94.95

Top Gun Diagonal Link

Our strongest and lightest diagonal link. Made from 1” x .065” x 36” Chromoly steel
with weld in Chromoly tube adapters. Comes complete with hardware including
1/2” misalignment Chromoly rod ends. The Top Gun is perfect for high horsepower
tube chassis applications.
PART# DESCRIPTION
3745 “Top Gun” Diagonal Link (5/8” x 5/8” mounting hole) $149.95

Panhard Bar # 3747

A panhard bar is a great locator for the street when good
cornering characteristics are your priority. Includes mild
steel rod ends. Made from a 1.0 x .156 x 30” DOM. Includes
all brackets, hardware and instructions.
PART# DESCRIPTION
3747 Panhard Bar $99.95
3747-1 Panhard Bar Bracket $21.50 # 3747-1

Wishbone Rear Axle Locator Kit

# 3746
Wishbone locators are the most popular with pro racers for high horsepower
applications. A wishbone locator will positively locate the rear end housing and
eliminate binding – with little or no change in geometry through the full range of rear
end travel. Made from 1.0” x .065” wall chrome moly tubing. Includes all rod ends,
hardware, brackets and instructions to fabricate a wish bone on virtually any car. # 3347
PART# DESCRIPTION
3746 Wishbone Locator Kit $159.95
Factory welded (Spec sheet must be supplied) Add $150.00
3347 Wishbone Housing Mount for 1/2” Hole Rod End $ 42.95

XTR Wishbone Rear Axle Locator Kit

Designed for extreme duty. Made from 1-1/4” X .095” Moly main tubes. Precision ground 1-1/4”
slide, pre-welded sleeve, 3/4 x 1/2 Moly rod ends, moly frame tabs and housing mount.
PART# DESCRIPTION
3346 XTR Wishbone Locator Kit $394.95

# 3346

8 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 8 11/21/14 9:37 PM

 WHEELIE BARS AND ANTI-ROLL BARS

Sportsman Adjustable Anti-Roll Bar

Designed to help control body roll. Our SPORTSMAN anti roll bar helps equalize traction # 3755 shown
by keeping the car level from side to side improving 60 ft. times. Perfect for bracket cars
where body roll can be a problem. Includes 24” mounting tube, 28” cold drawn steel
anti-roll bar, billet aluminum arms, adjustable links, rod ends, complete hardware and
instructions. (Not recommended for any car over 2600 lbs or car faster than 10:00.)
PART# DESCRIPTION
3755 Anti-Roll Bar $239.95

Top Gun Anti-Roll Bar Kits Bracket Boxing Strips

Our strongest and best anti-roll bar kits for the racer who needs complete suspension
control. These kits feature all Moly construction for the absolutely strongest anti-roll bar
system available. Sold in kit form, this kit has a maximum width of 24” but can be shortened
to any length during installation. Includes two link mounting locations for fine tuning, all
necessary hardware, rod ends and instructions. Sold in kit form, welding required. # 3761 shown

PART# DESCRIPTION
3761 Top Gun Anti-Roll Bar Kit $329.95
3762 Top Gun Heavy Weight Anti-Roll Bar Kit (For cars over 2500 lbs.) $339.95
Factory welded (Spec sheet must be supplied) Add $260.00

Chromoly Wheelie Bars

from 50” to 90” in Length
50” Wheelie Bars (shown)
An excellent choice for most applications, these 50”Chromoly bars weigh
# 3619
only 18 lbs. and provide proper control of front end lift. Perfect for controlling Lite Standard
wheel stands, prevents parts damage and improves performance. Wheel Wheel

Pro Wheelie Bar Kits

Our unwelded kits are perfect for the builder or professional and amateur alike.
Unwelded kits allow you to custom build the bars for the specific application, roadster,
pro stock or pro street. Chassis Engineering has the wheelie bars for your car! # 3621

PART# DESCRIPTION
3621 50” Wheelie Bars Black Powder Coated (1” x .058 Tubing) $389.95
3623 84” Top Gun Wheelie Bar Kit (unwelded) 1-1/8” x .083 Tubing $459.95
(Wheels Sold Separately)
3323 90” XTR Wheelie Bar Kit (unwelded) 1-1/2” x .065 Tubing $699.95
(Wheels Sold Separately)
3324 Wheelie Bar Support Kit $39.95
3619 Roller Bearing Wheel $ 31.50 ea
WEZ 1001 3/8” Hole “Orange” Wheelie Bar Wheels $154.00 pr
WEZ 1002 1/2” Hole “Orange” Wheelie Bar Wheels $139.00 pr
WEZ 1003 3/8” Hole “Orange Lite” Wheelie Bar Wheels $154.00 pr
WEZ 1004 1/2” Hole “Orange Lite” Wheelie Bar Wheels $139.00 pr # 3623

Carbon Fiber Wheelie Bars

MVM bars are completely ready to bolt on, includes 2 wheels,
4ps sis pit pins. Wheelie Bar Wrenches –Aluminum
MVM bars are completely ready to bolt on, includes
PART# DESCRIPTION
Mvm1000 72in double 1.625 round upper and lower $4820
2 wheels, 4ps sis pit pins.
Mvm1002 82in double 1.625 round upper and lower $5050 PART# DESCRIPTION
Mvm1003 72in double elliptical lower $5350 1005 3/4” x 6 1/2” $39.95
Mvm1004 82in double elliptical lower $5650 1006 15/16” x 6 1/2” $39.95
1007 1” x 6 1/2” $39.95
1008 3/4” x 10 1/2” $46.95
1009 15/16” x 10 1/2” $46.95
1010 1” x 10 1/2” $46.95

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 9

2015 CE CATALOG.indd 9 11/21/14 9:37 PM

 FRONT STRUTS AND ACCESSORIES

Strut Front Sub-Frame

Adding our strut front sub frame and suspension to your race car will significantly reduce
front end weight, (by as much as 400lbs.), dramatically improve tuneability and increase the
working room in your engine compartment for steering and headers. An easily tuned front
suspension is essential for consistent, straight launches on any track surface.
Includes:
• Front Frame Rails (unwelded) • Rack Mount Kit
• Strange Struts with Springs • Tie Rod Tube Kit
• Strange Disc Brakes • All hardware, Rod Ends
• Chrome Moly Lower Control Arms and Instructions
• Rack and Pinion Steering
PART# DESCRIPTION
5410 Strut Sub Frame with M.D. Brakes (2”x3” rails) $2,546.50
5415 Strut Sub Frame with H.D. Brakes (2”x3” rails) $2,599.95
5415C Strut Sub Frame with H.D. Brakes (1-5/8” Chromoly rails) $2,750.45
5415R Strut Sub Frame with H.D. Brakes (1-5/8” mild steel rails) $2,572.50
6020 Strut Sub Frame Kit Only $ 428.95
6020-2 Front Lower Strut Tab $ 5.00
6020-2C Front Lower Strut Tab (Chromoly) $ 8.00

Strange McPherson Struts

Features:
• Forged aluminum bodies with pressed 4130 spindle
• External damping adjustments
• Includes Hypercoil springs rated for your application
• 11.250” slotted forged steel rotors PSS125
• Chromoly lower control arm kit
• Billet aluminum hubs scalloped for reduced rotating weight
• Includes spring seat bearings

PART# DESCRIPTION
STR PSS 105 Lightweight, stud mount, externally adjustable struts, lower control arm kit,
spindle mount, lightweight brake kit, Hypercoil springs and spring seat bearing kit $1,720.50
PSS105DBL Double adjustable kit $2,120.56
STR PSS 115 Medium duty, stud mount, externally adjustable struts, lower control arm kit,
medium duty brakes Hypercoil springs and spring seat bearing kit $1,805.55
PSS115DBL Double adjustable kit $2,205.56
STR PSS 125 Heavy duty, stud mount, externally adjustable struts, lower control arm kit,
heavy duty 4 piston brakes, Hypercoil springs and spring seat bearing kit $1,859.00
PSS125DBL Double adjustable kit $2,259.07
Note: Specify 4 1/2 or 4 3/4 Bolt Pattern

Strange ULTRA Strut Strange GT Strut

The next level in Strut applications Designed for cars that need the extra length
(springs not included)
• Choice of 2.50 or 3.63 Stroke
• Moly Control Arm Kit • 6.5” Stroke
• Brakes, Bearings and Seals • Brakes, Bearings and Seals
• HyperCoil Spring • Control Arm Kit
PART# DESCRIPTION
PART# DESCRIPTION PSS 305 Spindle Mount $2419.00
PSS 200 Standard Brakes $2660.69 PSS 305DBL Spindle Mount $2869.00
PSS 205DBL Standard Brakes $3502.27 PSS 325 4-Piston Brakes $2557.50 PSS325
PSS 210 Carbon Brakes $4385.69 PSS 325DBL 4-Piston Brakes $3007.50
PSS 215DBL Carbon Brakes $5227.28

PSS210

10 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 10 11/21/14 9:37 PM

 A-ARM SUBFRAME KIT

Tubular A-Arm Front Suspension Up to 300 lbs. lighter

Chassis Engineering’s completely re-designed a-arm front end is virtually strong enough than OEM front
suspensions.
for any high performance application yet, remains extremely lightweight. The product of
years of drag racing and high performance experience has come together to produce a
kit that provides a positive way to tie lighter weight components to an existing chassis.

Kit Includes:
• 2” x 3” x .120” wall mandrel bent square tubing • Mustang II Spindles
• Jig welded A-arm mounts, Rack K-member and • Adjustable aluminum Coil-overs
K-member Mounts with Springs
• Rod End mounted Upper and Lower Tubular A-arms • Roll Cage Support Struts and
• Pinto Rack and Pinion with Billet Rack Mount Motor Plate Mounts
• Jig welded Drop-out Rack K-member • Hub-to-hub widths from 49-1/2 to
• Tie Rod Tube Kit 58-1/2 Inches in 1” increments
PART# DESCRIPTION
9120 Complete A-Arm Front Suspension System $2,689.95

Strut Mount Brackets Strut Installation Jig

Designed to mount the top of stud mount struts to the chassis, these Properly mounting a set of McPherson struts can be difficult
brackets are available pre-bent or flat for custom installations. to do correctly without some kind of jig to hold everything in
place. Our Strut Mount Jig will allow you to properly position
and hold your struts in place
while you install your mounting
brackets for a perfect fit.

PART# DESCRIPTION
# 6020-1P # 6020-1D 6025 Strut installation jig $94.95 ea.
# 6020-1 # 6020-1C

PART# DESCRIPTION Upper Strut Nut Socket

6020-1D Driver’s side strut mount bracket, pre-formed $17.95 This tool is designed to properly install and
6020-1P Passenger’s side strut mount bracket, pre-formed $17.95
remove the upper mount nut on struts.
6020-1 Strut mount bracket, un-formed $11.05
6020-1C Strut mount bracket, un-formed, chrome moly $16.75 PART# DESCRIPTION
6020-2 Front Lower Strut Tab – Mild Steel $5.00 1002 Upper Strut Nut Socket $65.00
6020-2C Front Lower Strut Tab –Chromoly $8.00

Racecar in a box
Chassis Engineering has the answer to budget building a solid competitive car.
Introducing the Race Car In A Box.

This unique kit offers 4 combinations:

• 4-Link/Strut
• 4-Link/A-Arm
• Ladder Bar/Strut
• Ladder Bar/A-Arm

You pick the combination and we add the extra’s needed depending on budget and/or E.T.(as low as 7.50).
Basic Kits start at $5121.00 up to $5626.20.

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 11

2015 CE CATALOG.indd 11 11/21/14 9:37 PM

 CHASSIS KITS

For the racer who wants the ultimate in round

tube chassis design, Chassis Engineering’s
Eliminator X chassis has the race proven
features it takes to run fast and consistently.
Designed for the sportsman or Pro racer, the
Eliminator X chassis kit is competitive in a
variety of classes including NHRA Super
Classes, Fastest Street Cars plus other
sportsman and pro classes.

Sold in kit form and engineered for the Chassis

pro builder or skilled do-it-yourselfer,
the Eliminator X chassis can be accurately
constructed on any flat, level surface. Mild Features & Specifications
steel kits can be certified for E.T.’s as quick as • Funny Car Cage included • Wheelbase: 98” to 120”
7.50. Chromoly kits can be certified to 25.1C
• Detailed instructions with illustrations • Approx. Weight: 395lbs. Mild Steel, 295lbs. Chromoly
and E for 7.49 and quicker. Other certifications
are available upon request. Specify make and • Mild Steel: 1-5/8” x .134” Wall • Designed for strut front end and four-link rear suspension
model. Final fitting of tubing is necessary. • Chromoly: 1-5/8” x .083” Wall

PART# DESCRIPTION
5000 Eliminator X Chassis 1-5/8” x .134” Mild Steel (Funny Car Cage Included) $1,399.95
5010 Eliminator X Chassis 1-5/8” x .083” Chromoly (Funny Car Cage Included) $2,299.95
5120 Eliminator X Pick-Up Chassis 1-5/8” x .134” Mild Steel (Funny Car Cage Included) $1,399.95
5130 Eliminator X Pick-Up Chassis 1-5/8” x .083 Chromoly (Funny Car Cage Included) $2,299.95

Super Class Suspension Kits

We’ve selected the most popular suspension components for our Chassis kits
and grouped them together in packages that will save you time.

These packages include everything you need to complete the front end and rear
end suspension on your chassis with the same high quality components used in
our own chassis shop.
Kit Includes:
• Strange Struts With Brakes And Control Arms
• Upper And Lower Strut Mounting Brackets With Hardware
• Rack and Pinion With Mount
• Tubular Tie Rod Ends
• Steering Column With Aircraft U-joint
• XTR Four Link With Moly Rod Ends and NAS Style Bolts
• Wishbone Kit
• Top Gun Anti Roll Bar Kit
• Upper Shock Mounts With Hardware
• Strange Double Adjustable 7” Stroke Shocks With Springs

PART# DESCRIPTION
5006 Complete Suspension Kit, Mild Steel with Heavy Duty Strange Front Brakes $4527.49
5015 Complete Suspension Kit, Chromoly Spindle Mount Struts with LightweightBrakes $4661.99
5016 Complete Suspension Kit, Chromoly with Heavy Duty Strange Front Brakes $4800.49

12 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 12 11/21/14 9:37 PM

 RAILS AND CONNECTORS

Chassis Engineering Rear PART# DESCRIPTION

3662 Ladder Bar Rails, no brackets included, 2” x 3” x .120” $209.95 pr
Frame Rails 3672 Ladder Bar Rails, no brackets included, 2” x 3” x .083” $209.95 pr
To run a big tire car you’ll need a set of 3663 Ladder Bar Rails, w/Factory Welded Brackets, 2” x 3” x .120” $264.95 pr
our ladder bar or four-link frame rails. 3673 Ladder Bar Rails, w/Factory Welded Brackets, 2” x 3” x .083” $264.95 pr
Our frame rails can be easily modified 3665 Four-Link, no brackets included, 2” x 3” x .120” $209.95 pr
3675 Four-Link Rails, no brackets included, 2” x 3” x .083” $209.95 pr
if needed to fit virtually any application.
3666 Four-Link, w/Factory Welded Brackets, 2” x 3” x .120” $264.95 pr
Chassis Engineering rails are computer- 3676 Four-Link Rails, w/Factory Welded Brackets, 2” x 3” x .083” $264.95 pr
controlled mandrel bent from: 3677 Ladder Bar Rails, for Compact Cars No brackets included, 2” x 3” x .083” $209.95 pr
• 2” x 3” x .083 or .120 mild steel tubing 6125 79-93 Mustang or Import Frame Rail, w/Factory Welded Brackets, 2” x 3” x .083” $264.95 pr
• 1-3/4” x .134 round tube. 3670 Four-Link Rails, w/Factory Welded “Top Gun” Brackets, 2” x 3” x .083” $264.95 pr
• (1-5/8” Chromoly available by request) 3679 Round Tube Standard four Link Rails, mild steel, 1-3/4” x .134” $264.95 pr
3680 Round Tube Top Gun four Link Rails, mild steel, 1-3/4” x .134” $264.95 pr

Ladder bar rail with brackets

NOTE: Removal of the rear floor pan is
Four-link rail with brackets
necessary for proper installation.

Upper Shock Cross Member Weld in Subframe Connectors

Our shock crossmember welds between the frame rails to increase chassis rigidity If you race a uni-body car, the use of subframe connectors is
while providing a secure mount for the top of the shocks. Includes crossmember absolutely essential. Uni-body chassis’ can suffer severe flex and
1-3/8” x .095” x 40”, weld on gusseted shock mount tabs, 1/2” bolts and nuts, and twist when launched. Our connectors are made from mild steel and
misalignment bushings. precision formed to fit without modifications to the floor or other
factory components while increasing the chassis stiffness necessary
for a consistent working suspension. Installation can be done in half
the time of other connectors.

Available for most american built uni-body cars

PART# DESCRIPTION Connectors $99.50 pr

3716 Shock Crossmember (unassembled) $42.95 3640 shown

Dropped Cross Members

Chassis Engineering offers several dropped cross members. Square tube
cross members are available in 2” x 3” x 60” x .083” or .120” wall. Round
tube cross members are available in 1-3/4” x .134” mild steel or 1-3/4”
chromoly and are available in 45” or 60” lengths. Both square and
round tube cross members feature a 3-1/2” drop. PART# DESCRIPTION
3640 67-69 Camaro/Firebird
3641 70-81 Camaro/Firebird
3642 62-67 Chevy II
3643 75-79 Nova
3644 64 1/2-73 Mustang
3645 70-77 Maverick
3646 68-74 Nova
3647 79-93 Mustang
3648 82-92 Camaro/Firebird
3650 A-Body Mopar 108” W.B.
3651 68-76 B-Body
PART# DESCRIPTION 3652 A-Body Mopar 110” W.B.
3638 2” x 3” x .083” Dropped Cross Member $59.95 ea 3653 E-Body Challenger
3637 2” x 3” x .120” Dropped Cross Member $59.95 ea 3654 E-Body Cuda 70-74
3718-2 1-3/4” x .134” x 45” Mild Steel Round - Drop Cross Member $27.50 ea 3655 62-67 B-Body Mopar
3719-1 1-3/4” x .134” x 60” Mild Steel Round - Drop Cross Member $33.75 ea 3656 94-99 Mustang
3719-1C 1-3/4” x .083” x 45” Chromoly Round - Drop Cross Member $53.75 ea 3657 93-02 Camaro/Firebird
3719-2C 1-5/8” x .083” x 60” Chromoly Round – Drop Cross Member $53.75 ea

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 13

2015 CE CATALOG.indd 13 11/21/14 9:37 PM

 ROLL BARS & CAGES

All roll bars, except 4 point, 4-Point Roll Bars

manufactured by CHASSIS Show bars are not NHRA legal.
ENGINEERING are guaranteed to
pass tech by NHRA and many PART# DESCRIPTION
other racing associations in the 0300 4-Pt. Roll Bar, 1-3/4” x .134” Mild Steel $130.15
appropriate classes. Manufactured on
state-of-the-art computer operated 6-Point Roll Bars
benders...our roll bars and cages
feature smooth round bends without Required for cars running from 11.00 (7.00) to 11.49 (7.35) and
deflection in the tubing size or shape. convertible running 11.00 (7.00) to 13.49 (8.25). Call for your
application.
Each roll bar or cage is bent PART# DESCRIPTION
specifically for your application 0400 6-Pt. Roll Bar, 1-3/4” x .134” Mild Steel $174.95
insuring a quality bar that provides B400 6-Pt. Roll Bar, 1-3/4” x .083” Chromoly $374.95
the best possible protection. We don’t
just send out a pile of bent tubes, all 8-Point Roll Bars
Chassis Engineering roll bar kits are
delivered with extra length needed for Required for cars running from 11.00 (7.00) to 11.49 (7.35) and
a closer fit. convertible running 11.00 (7.00) to 13.49 (8.25). Call for your application.

PART# DESCRIPTION
Call our technical advisors today for
0500 8-Pt. Roll bar, 1-3/4” x .134” Mild steel $189.95
the best combination for your car. B500 8-Pt. Roll bar, 1-3/4” x .083” Chromoly $409.50
Custom roll bars are readily bent to
your specifications. Typically no extra
charge.
Moly or Mild 10-Point and 12-Point Roll Cages
Required by most racing associations for cars running 10.99 (6.99) or
NOTE: quicker or any car exceeding 135 mph. All cages include a rear X-brace
6-Pt. Roll bar mandatory when at no additional cost. Available in either mild steel or 4130 chromoly.
running 11:00 to 11:99.
10-Point & 12-Point Roll Cages
Roll cage mandatory when running
10:99 or quicker. PART# DESCRIPTION
0600 10-Pt. Roll Cage, 1-3/4” x .134” Mild Steel $344.95
Cars 8.50 and quicker require A600 10-Pt. Roll Cage, 1-5/8” x .134” Mild Steel $344.95
funny car cage additions and C600 10-Pt. Roll Cage, 1-5/8” x .083” Chromoly $589.95
secondary door bar 0700 12-PT. Roll Cage, 1-3/4” x .134” Mild Steel $389.95
A700 12-Pt. Roll Cage, 1-5/8” x .134” Mild Steel $389.95
C700 12-Pt. Roll Cage, 1-5/8” x .083” Chromoly $669.95

Mild or Moly We’ve Got Your Roll Bar to Roll Cage Conversion
Upgrade your roll bar to a cage with
our cage conversion kits. Chassis 10-Point Conversions
Engineering offers the necessary
Mild or moly, our kits contain the necessary pieces to upgrade your
pieces to upgrade your 6-point or
roll bar to a full 10-point roll cage.
8-point roll bar to full cage
protection. All the pieces in our PART# DESCRIPTION
upgrade kits are made from the 0800 10-Point Addition 1-3/4” x .134” Mild Steel $174.95
same materials as our complete roll A800 10-Point Addition 1-5/8” x .134” Mild Steel $174.95
bar and cages, and are pre-bent for C800 10-Point Addition 1-5/8” x .083” Chromoly $299.95
easy assembly.

25.5 Tubing Kits 12-Point Conversions

Tubing to assist in Certifying Cages to 25.5. This kit contains all of the same pieces as in our 10-point addition plus
the additional pieces necessary to upgrade to a full 12-point roll cage.
PART# DESCRIPTION
3201 Mild Steel $283.55 PART# DESCRIPTION
3202 Chromoly $337.83 0900 12-Point Addition 1-3/4” x .134” Mild Steel $219.95
A900 12-Point Addition 1-5/8” x .134” Mild Steel $219.95
C900 12-Point Addition 1-5/8” x .083” Chromoly $379.95
Custom dimensions are welcome. Spec sheet available on line or call
our tech department.

14 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 14 11/21/14 9:37 PM

 ROLL BARS AND CAGES

Funny Car Cage Conversion

Door X Brace
Convert your roll cage to include a funny
car cage. Our kit includes all the pre-bent This X-brace kit has to be added to
tubes you need to install a funny car cage in any cage in cars running quicker
virtually any chassis, chromoly or mild steel. than 8.50. Available in 1 1/4” x
Tubes are extra long so they can be fit to your .120” mild steel and 1 1/4” x .065”
application. Chromoly
PART# DESCRIPTION
4024 Funny Car Cage Addition 1-5/8” x .134” Mild Steel $149.95 PART# DESCRIPTION
4023 Funny Car Cage Addition 1-5/8” x .083” Chromoly $249.95 3210 Mild Steel Door Bar X-Brace $54.95
5200 Helmet Bar Kit $ 44.95 3210C Chromoly Door Bar X-Brace $58.95

Package Tray Strut Bars Cage Gussets

Perfect for those who want to The ideal way to add increased strength and
retain their back seat. These rear roll bar security to your roll bar at all tubing joints.
struts are designed to go through the # 3212 Made from .090” steel and are 2” x 2”.
package tray or speaker panel behind PART# DESCRIPTION
the rear seat and then bend down to 3768 Cage Gussets $17.95 (25 per package)
attach to the frame or shock mount.
PART# DESCRIPTION Helmet Hook
3212 Package Tray Strut Bars (1-3/4” x .134 Mild Steel) $59.95 pr Attaches to your roll bar and protects your helmet,
made from lightweight billet aluminum.
Pro Street Door Bars PART#
5350
DESCRIPTION
Weld-On Helmet Hook $ 3.95
Pre-bent street only door bars
for easier entry and exit. Perfect
Pro Street Door Bar Roll Bar Angle Finder
for street cars, but not legal for Never make a wrong bend again. Adjust to the desired angle and transfer to
competition use. Increase the safety the tubing for bending.
of your street ride and provide the
necessary support to the main hoop. # 3213
Sold in pairs and made from 1-3/4”
PART# DESCRIPTION
x .134” wall tubing.
9600 Roll Bar Angle Finder $49.95
PART# DESCRIPTION
3213 Pro Street Door Bar Kit $58.50 pr
SFI Roll Bar Padding
Designed to meet SFI Spec 45.1, this professional
Swing out Side Bar Kit quality roll bar padding is required by sanctioning
bodies where the driver’s helmet may
If you’re tired of climbing over the door bar of
# 3214
contact the cage. Easily attached with
your racecar...struggle no more. Pull the quick
the provided adhesive strips.
release pin and the Chassis Engineering door
PART# DESCRIPTION
bar swings out on it’s lower
CAR 1020 Professional Roll Bar Padding $30.95 ea
bracket, swing it shut once One 3ft. section, black only
you’re in the seat. It’s the
easy answer for easy entry Carbon Fiber Tube Protectors
and exit of both racing PART# DESCRIPTION
and street vehicles while CF1250 1 1/4” - 1 1/2” $50.00
retaining the cage’s legality CF1251 1 5/8” - 2” $50.00
us for racing.
e. Roof Mount Tow Kit
The best and easiest way to tow your race car. Our removable, roof
mounted tow hook is simple and easy
5 to install and eliminates the possibility
PART# DESCRIPTION
5 of front end damage caused by frame
5 3214 Swing-Out Side Bar Kit $44.50
mounted tow hooks. powdercoat finish.
PART# DESCRIPTION
4617 Roof Mount Tow Hook $59.95

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 15

2015 CE CATALOG.indd 15 11/21/14 9:37 PM

 COIL OVER AND SHOCKS

Single and Double adjustable Double Adjustable: external compression and extension (bump and rebound) setting are easily
accessible. Adjustment is simply altered by turning the numerically marked knob to “lock-in” the

shocks take the guesswork desired setting.

Single Adjustable: extension is easily modified by turning a conveniently located external knob that
out of suspension tuning! provides 10 precise adjustments.
Strange shock packages include heat treated high mis-alignment bearings, spring seats, jam nuts,
inspection serial numbers and coil springs to specification.
PART# EXTENDED SUGGESTED RECOMMENDED PRICE
LENGTH SPRING LENGTH RIDE HEIGHT
Double Adjustable
S-5007 A 19.52” 14” 15.250”-16.000” $660.00 pr
S-5006 A 17.52” 12” 13.875”-14.500” $660.00 pr
Single Adjustable
S-5207 19.52” 14” 15.250”-16.000” $407.00 pr
S-5205 15.76” 12” 12.625”-13.250” $407.00 pr
S-5203 13.23” 7-8” 11.000”-11.375” $407.00 pr
S-5206 17.52” 12” 13.875”-14.500” $407.00 pr
Springs included

Afco Shocks PART# EXTENDED

LENGTH
SUGGESTED
SPRING LENGTH
RECOMMENDED
RIDE HEIGHT
PRICE

Double Adjustable
AFCO single adjustable shocks give you the 3830 12.90” 7” 10.75” – 11.25” $679.98 pr.
ability to adjust the rebound dampening control 3840 14.90” 7”-8” 12.25” – 13.25” $679.98 pr.
without affecting the compression dampening 3850 16.90” 10”-12” 13.75” - 14.75” $679.98 pr.
3870 20.90” 14” 15.50” – 18.50” $679.98 pr.
characteristics of the shock.
Single Adjustable
3835 12.90” 7” 10.75” – 11.25” $502.90 pr.
AFCO Double Adjustable “Eliminator” shocks 3845 14.90” 7”-8” 12.25” – 13.25” $502.90 pr.
allow independent adjustments of both the 3855 16.90” 10”-12” 13.75” - 14.75” $502.90 pr.
compression and rebound dampening. 3875 20.90” 14” 15.00” – 18.00” $502.90 pr.
Springs extra

Penske Shocks
• Independent Adjusters, 40 clicks of compression, 18 clicks of rebound
• Custom built lenghts, tailored to car and driver feel
• Hardware included with coil-over

PART# DESCRIPTION
PS-83001 Remote Canister Double Adjustable $795.00 ea
PS-75CODA-19.7-S 7500 Coil over Double Adjustable $550.00 ea
Springs extra

JRI Shocks Spanner Wrench

Sportsman Series Double Pro Series - Double Designed specifically for the adjustment of the
Adjustable Shock Adjustable Shock springs on coil over shocks, this handy tool
makes spring adjustment easy. A must in every
• Rebound and Bump Adjustable racer’s tool box.
• Rebound Adjustable at shaft end
• Bump Adjustable at body end at shaft end
• Mono Tube Design • Mono Tube Design
• Gas Pressurized • Gas Pressurized
• 6” Stroke – 19.5 extended and • 4”, 5”, 6”, 7”, 8” Strokes available
13.5 compressed
• (5” and 7” Strokes – coming soon)
PART# DESCRIPTION
PART# PART# 1000 Coil Over Spring wrench $19.95
400-150 $325.00 ea 400-126 $912.95 ea
Springs extra Springs extra

16 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 16 11/21/14 9:37 PM

 SPRINGS AND SHOCKS

Economy Spring Over Shock Mock-Shock Mount Jig

Here’s a low cost alternative to the more This handy item makes the proper installation of coil
expensive coil-over systems. These coil spring over shocks a snap. Designed to bolt in the place of your
mounts provide many of the same benefits at a # 5076 shocks while installing the rear suspension, these jigs hold
fraction of the cost. Kit uses the same 12” x 2.50” your shock mount brackets at the correct distance (14”
ID springs as the Strange, or other coil overs. An eye-to-eye) ensuring your car sits at the proper ride
OEM style shock is mounted inside the spring and height when finished.
ride height is adjustable up to 6” of suspension travel
for street or strip use. These kits are ideal for street # 3716-3
rods and Pro Streeters. Delivered complete with upper
mounts, adjustable lower mounts, shocks, springs, PART# DESCRIPTION
3716-3 Shock Mount Jig $17.50 ea
hardware and complete instructions. Adjustable lower shock mount not included
PART# DESCRIPTION
5076 Coil Spring and Shock Mounts $269.95 pr
Coil Spring Adjustment Bearings
If you’ve ever adjusted the springs on a pair of coil overs
Adjustable Lower Shock Mount you’ll really appreciate these thrust bearings. They
fit between the lower spring seat and the bottom
An adjustable shock mount is essential on any coil over
of the spring providing a roller bearing surface
equipped car. Chassis Engineering
# 3714 between the seat and the spring allowing you to
adjustable lower mounts are the
turn the seat with pressure on the spring. Makes
ideal way to mount the bottom end
adjusting ride height much easier. Sold in pairs.
of any coil over. Our mounts are
designed to be super strong, take PART# DESCRIPTION spring adjuster
up as little room as possible on the rear 1001 Coil Over Thrust Bearings $49.95 pr bearings
housing and offer up to 6” of ride height
adjustment with the removal of just two
bolts per side. Kit includes two housing brackets, four gold zinc
plated “L” brackets that bolt to the housing brackets, 1/2” bolts Rear End Shock Mount Kit
and nuts with mis alignment bushings and instructions. Made from 3/16” mild steel with a 3” radius to fit
all popular rear end housings. Includes 1/2”
PART# DESCRIPTION hardware, alignment bushings. Kit
3714 Lower Rear Shock Mounts $54.95 pr mounts one pair of shocks.
3720 Lower Rear Shock Mounts Notched for Back Brace $54.95 pr
3721 Lower Shock Mount Kit with Hardware minus Housing Brackets $34.95 pr

# 3717
Shock Bearings
These spherical bearings accept a 1/2” bolt and fit all standard coil over shocks PART# DESCRIPTION
with a 1” bore. They feature a built-in shoulder on both sides eliminating the 3717 Shock Mount Tabs $22.50 pr
need for misalignment bushings and provides the required clearance between
shocks and mounting brackets for bind-free suspension travel. A must for the
proper mounting of any coil over shock.
Shock Mount Spud
These 1/2” shock mount spuds are
used to secure the top or bottom of any
coil over style shock. Easily welds to a
crossmember or rear end bracket.

# 3723
PART# DESCRIPTION
R/E 1000 1.00” Wide Spherical Shock Bearings (set of four) $59.50 PART# DESCRIPTION
R/E 1500 1.50” Wide Spherical Shock Bearings (set of four) $59.50 3723 Shock mount studs. $37.50 pr

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 17

2015 CE CATALOG.indd 17 11/21/14 9:37 PM

 COIL OVER AND SHOCKS

Coil Over Kits

Installing a set of coil over shocks and springs on your race car or street rod is the quickest
way to reduce the unsprung weight in your suspension system while gaining
adjustability in damping characteristics and ride height. We’ve combined the Strange
Engineering all aluminum, externally adjustable coil overs with our most popular mounts and
accessories to create a coil over package that includes everything needed to install and adjust
them at a price that’s better than the individual price of these components.

Kit Includes:
• Strange Engineering coil overs with your choice of springs
• Adjustable lower shock mount
• Upper shock crossmember
• Coil over adjuster wrench
• Coil over thrust bearings
PART# DESCRIPTION
5060 Coil Over Kit $564.00
For Double Adjustable Strange Coil Overs, add $253.00

Every spring we sell is guaranteed within 2% of the Driveshaft Safety Loops

Some kind of driveshaft loop is required by all
stated rate! sanctioning bodies to contain the driveshaft in
We stock one of the largest inventories of popular the event of U-joint or driveshaft failure. Chassis
drag racing coil over springs in the country! Made Engineering has more different loops for more
from the highest quality chrome silicon steel, these applications than anyone. From bolt on universal types
springs are guaranteed to be within two percent of to round tube, weld together loops for tube chassis
stated rate and length! Our tech advisors have years cars. All loops guaranteed to pass tech.
# 4037
of experience in recommending the proper spring
rate for drag racing applications. All springs use a
black protective coating for long lasting good looks
and are individually marked for length and rate.
# 4035
PART# DESCRIPTION
3982 12” x 2.5” ID springs $81.00 pr
STR-SP-8 $120.00 pr
STR-SP-12 $120.00 pr
STR-SP-14 $120.00 pr
PART# DESCRIPTION
Coil Over Spring Mounts 4034 4” Driveshaft loop kit with sleeves and pins $25.00
4035 4” Driveshaft loop & crossmember kit $54.95
Our coil spring mounts are designed to replace the factory
4035-1 4” Driveshaft loop only $15.75
springs on most common IMPORT front struts with a 4036 4” 360 Driveshaft loop & crossmember kit $54.95
smaller diameter spring for additional tire clearance and 4036-1 4” 360 Driveshaft loop only $25.00
adjustability. Adjusting ride height and suspension tuning 4037 4” 360 Driveshaft loop with sleeves and pins $32.95
of your IMPORT is now easy by switching spring rates 4038 4” 360 DDriveshaft loop, moly with sleeves & pins $39.95
and adjusting spring height to suit track conditions. All 4038-1 4” Driveshaft loop only, moly $24.95
aluminum sleeve measures 2-1/16” ID and are available 4042 6” 360 Driveshaft loop, moly with sleeves & pins $39.95
4042-1 6” Driveshaft loop only, moly $15.50
in 10” lengths to fit most common struts and include 4042-2 6” 360 Driveshaft loop only, moly $13.25
adjustable aluminum bottom and top seats. (springs sold separately) 4044 6” 360 Driveshaft loop with sleeves & pins m.s. $33.50
PART# DESCRIPTION 4044-1 6” Driveshaft loop only, mild steel $12.86
5080 Coil Over Spring Mounts $109.95 pr 4044-2 6” 360 Driveshaft loop only, mild steel $18.25

Drive Shaft Enclosures Drive Shaft Tunnel Kits

Designed to save the driver from injury in the event of a driveshaft or u-joint
failure. These tunnels are made out of .050 chromoly and will fit inside any
driveshaft loop with an inside diameter of 6 inches. They are
now mandated in Pro-Mod, Pro-Stock and Top
Sportsman. Sold in pairs.
PART# DESCRIPTION
PART# DESCRIPTION 4050 12” Tunnel w/ One Loop Kit (moly) $189.95
4015 12” long $150.00 pr 4051 18” Tunnel w/ Two Loop Kits (moly) $244.90
4016 18” long $165.00 pr 4052 24” Tunnel w/ Two Loop Kits (moly) $259.90
4017 24” long $180.00 pr (Kits are not welded)

18 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 18 11/21/14 9:37 PM

 SAFETY

Window Nets Funny Car Window Nets Custom Double Buckle FC Nets
Designed to contain arms and hands inside the car Designed to fit cars equipped with Customer must supply pattern when ordering
in the event of crash or rollover these diagonal cut Funny Car Style Roll 10.75”
nets closely follows the shape of the roll bar for Cages.
improved safety especially in cars with fiberglass
doors. Available in black only,
22”
our S.F.I. approved 22”
19”
and tagged window
nets are accepted

18”
by all sanctioning
25”

bodies.

23.5” # 4032
# 4030

PART# DESCRIPTION PART# DESCRIPTION PART# DESCRIPTION

19” X 25.5” X 23” Diagonal Window Net 4030 10-3/4” x 22” x 19” Black only $39.95 ea 4029 Double buckle FC net $109.00 ea
4032BK Black $39.95 ea

Window Net Mount Kit RJS Seatbelts

Getting a net? You’ll definitely need one of our
great window net mount kits. Everything you 5 point seat belts have 3” lap and
need to safely install a window net in a roll shoulder straps with 2” crotch strap.
cage equipped car or truck. Belts can be bolt-on or wrap around.

PART# DESCRIPTION
4033 Window Net Mount Kit $79.95
4031 Funny Car Net Mount $79.95 # 4033
4028 Double Buckle Net Mount $47.95

Seat Belt Mounting Kit

Includes the necessary weld-on tabs and grade 8
hardware to properly mount a 5 pt. harness in most
any application.
PART# DESCRIPTION
2905 Chromoly Seat Belt Installation Kit $18.95
3905 Mild Steel Seat Belt Installation Kit $14.95

Rear Driveshaft Cans

Chassis Engineering’s Driveshaft cans are designed to bolt directly to Ford 9”
center sections including the Strange Ultra Case. Made entirely of chromoly and
designed for complete encasement, the driveshaft is contained and shrapnel
cannot project outward, offering greater protection. Standard case
PART# DESCRIPTION
4020 Standard Case $250.00
4020 U Ultra Case $265.00
Custom Tubular Designs Available
Ultra case

SFI Roll Bar Padding

Designed to meet SFI Spec 45.1, this professional quality roll bar
padding is required by sanctioning bodies where the driver’s helmet
PART# DESCRIPTION
may contact the cage. Easily attached with the provided adhesive strips. RJS 2981906UNI RJS Cam Lock Harness
Black $149.95
PART# DESCRIPTION
CAR 1020 Professional Roll Bar Padding
RJS5021906UNI RJS Latch Harness
One 3ft. section, black only $30.95
Black $76.99

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 19

2015 CE CATALOG.indd 19 11/21/14 9:37 PM

 STEERING

Complete Steering Column Kit

One of the most complete steering column kits available. Designed to mount
easily in virtually any chassis, these kits include: column tube, self-lubricating
bushings, weld-on u-joint, Pinto splined adapter and braces to securely mount
the column. The kits also include one of our 3-bolt quick disconnect steering
hubs (not SFI approved) at no extra charge.

PART# DESCRIPTION
2710 A Steering Column Kit $174.95
2710 Steering Column Kit with Aircraft U-Joint $195.95
2728 Steering Column Kit Chrome Moly $224.95
STRQ 1200 SFI Hub $115.50

Racer’s Choice Rack and Pinion

Our rack and pinions are used in all forms of motorsports. They’re lightweight, Rack Mounts
easy to mount, plus the wide variety of adapters and U-joints available, make Everything you need to mount your Pinto
this rack the racer’s choice. Our racks offer a precise, solid steering feel and rack and pinion to your cross member.
control that’s just not available with other steering systems. All racks are new,
not remanufactured, and include factory tie rods. # 2702

# 2704

# 2701
# 2705

PART# DESCRIPTION
2701 71-72 Pinto Billet Rack Mounts $59.95
2703 Pro Rack Mount Kit $49.95
# 2709 2708 Alum. Mounting Bushings, ‘73 - Up Mustang II $54.95 pr
2702 Lightweight Rack Mount $28.95

PART# DESCRIPTION
2704 Pro Rack and Pinion $289.95 Steering Shaft Support
2705 ‘71 - ‘72 Pinto Rack & Pinion $200.00 Our lightweight and simple steering shaft support is designed to stabilize any
2705-1 5” Narrower Rack $222.00
3/4”O.D. race car steering shaft using two U-joints. Features a self lubricating
2709 ‘73 - Up Mustang II $200.00
Narrowed Racks (36.5” - 44.5”) $335.64 Delrin bushing for reduced friction and includes a weld on support.
(Call for application)

Tie Rod Tubes

Designed to easily adapt
rack and pinion to a
variety of applications. This
simple kit slips over and
welds to the stock rods
and can be trimmed to fit
virtually any chassis. Kit
includes two tubes, two
spherical rod ends with
alignment bushing
and instructions.

PART # DESCRIPTION PART# DESCRIPTION

1900 Tie Rod Tube Kit w/7/16” Rod Ends $72.50 pr 2730 Steering Shaft Support $27.75
2700 Tie Rod Tube Kit w/1/2” Rod Ends $72.50 pr

20 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 20 11/21/14 9:37 PM

 STEERING

Steering U-Joints Front End Travel Limiters

These small, high quality U-joints # 2718 # 2717 Travel limiters are one of the easiest tuning devices to install and can make
are just what you need when a dramatic difference in the performance of any race car. Limiting front end
routing steering shafts around travel is one of the most common ways to tune out unwanted chassis twist and
headers, engine and frame. They control excessive wheelstanding. Our travel limiters can be installed on virtually
are bored 3/4” on both ends or any type of front suspension and are completely adjustable for tuning.
with one end splined for a Pinto
rack, and are secured with a set
screw. These little jewels will get you around the tight
spots. We also have high quality aircraft joints. # 2727

PART# DESCRIPTION
2720 Weld-On Universal 3/4” x 3/4” Bore $60.50
2712 3/4” x 9/16” x 26 Spline, Mustang, Pinto Man. $63.00
2713 3/4” x 3/4” x 36 Spline $63.00
2715 3/4” x 5/8” x 36 Spline, Vega $72.50
2727 3/4” x 3/4” Bore Aircraft Joint with Boot $86.75
PART# DESCRIPTION
2717 Splined Female Adapter 9/16” x 26 Spline $14.18
4109 Front End travel Limiters $49.95
2718 Splined Male Adapter 9/16” x 26 Spline $14.18

Quick Release Steering Hubs 67-69 Camaro Steering Arms

Quick release steering hubs are required in most These heavy duty steel steering arms for 67-69 Camaros, 67-74 Firebird, 64-72
tube frame cars and are a great addition to any Chevelle, Cutlass, GTO and Skylark, 68-74 Nova are far superior in strength to
racing vehicle. Being able to quickly remove the aluminum arms currently available. Converts from rear steer to front steer
the steering wheel offers a number of obvious for rack and pinion conversions and allows for greater bump steer adjustability.
safety and convenience benefits. Our steering
hubs release with the push of a button,
accepts most popular steering wheels
and and works with any 3/4” tubular
column.

PART# DESCRIPTION
WIL 270-2016 Quick Disconnect Wilwood Steering Hub $ 29.90
STR Q-1200 Strange Eng. Steering Hub SFI Approved $115.50

Must use 2700

Tie Rod Kit
Five Bolt Steering Wheel Adapter
Adapts a 5-hole steering wheel mount to a 3-hole quick
disconnect assembly. PART# DESCRIPTION
5900 Steering arms pr $169.95
2700 Tie Rod Tube Kit w/1/2” Rod Ends $ 72.50 pr
PART# DESCRIPTION
4705 Steering wheel adapter $9.95

Grant, Competition Steering Wheel

This Top Marker wheel features a combination of
Diamond Vinyl/Smooth Vinyl Grip for a “Sure Grip”
feel. It also has two holes pre-drilled and ready to
mount 11/16” sized switches. The holes are shipped
with plastic plugs just in case you only need a one
button set up. Wheel is 13” in diameter and has 5
bolt mounting pattern.

PART# DESCRIPTION
Car 1013 Grant steering wheel $102.00

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 21

2015 CE CATALOG.indd 21 11/21/14 9:37 PM

 MOTOR PLATES

Aluminum Front Motor Plates Steel Mid-Mount Plates

A must for tube chassis cars and a great addition to any Mid-mount plates are designed to securely mount
race only vehicle. Motor plates are 36” wide and 12” tall to the rear of the engine to the chassis. A mid plate will
fit any chassis – 1/4” plate thickness helps stiffen chassis minimize block twist, prevent transmission damage and
and eliminates engine movement. All plates are computer improve clutch disengagement. Made from .090” mild # 3535 Mustang .090 Steel
machined from of 6061-T6 aircraft premium aluminum. steel and computer machined for a perfect fit in any
chassis. Unlike thicker plates made from aluminum, steel
plates permit installation without changing or modifying
the input shaft or throw out bearing, or converter. The No.
3705 mounting kit consists of 1/8” steel frame tabs and
grade 5 bolts to make your installation a snap.
# 3700 Small Block Chevy PART# DESCRIPTION
3699 Small Block Ford Steel $75.95 # 3706 Chevy .090 Steel
3709 460 Big Block Ford Mid Plate $75.95
3706 Big and Small Block Chevy Steel $42.95
3704 Small Block Mopar $75.95
3707 Big Block Mopar $75.95
3705 Installation Kit for Mid-Mount Plate $11.50
# 3701 Big Block Chevy 3689 Pro Stock Mid Plate Mounts $42.95
3535 ‘79-’04 Mustang Mid Plate $42.95
3537 ‘79-’04 Mustang Mid Plate Mount $26.95

# 3707 Mopar Big Blk .090 Steel

# 3702 Big Block Mopar

Chevy Mid Plate For Dragster or Altered

Made from 1/4” thick aircraft quality aluminum and
measures 24” x 24”, this mid plate is thicker than the door
car mid plate for additional stiffness of the chassis necessary
# 3692 Big Block Chevy on these cars. Pre drilled for crankshaft, starter, bellhousing
bolts and fits either big block or small block Chevys.

PART# DESCRIPTION
3696 Chevy Mid Plate, Dragster or Altered $174.95

# 3708 Ford 460

# 3696 Chevy Mid Plate

Chevy Mid Plate For Door Cars

Specifically designed for door cars, this 3/16” aircraft quality
# 3697 Ford 289, 302, 351 aluminum plate is predrilled for crankshaft, starter and
bellhousing bolts for either big or small block Chevys. It
measures 20” tall x 30”, easily trimmed to fit your particular
application.

PART# DESCRIPTION
# 3531 Mustang 1/4” Aluminum 3694 Chevy mid Plate, Door Car, cut $175.50
3695 Chevy mid Plate, Door Car $174.95 # 3695 Chevy Mid Plate
PART# DESCRIPTION
3700 Small Block Chevy $119.95
3701 Big Block Chevy $119.95
3702 Big Block Mopar $133.95
3703 Small Block Mopar $133.95
3708 Ford 460 $126.50
3691 Small Block Chevy Cut Motor Plate $149.95
3692 Big Block Chevy Cut Motor Plate $149.95
3697 Ford 289-302, 351 Windsor $126.50
3705 Motor Plates Install Kit $ 11.50
3690 Tube Chassis Mounts w/Rests $ 29.95
3530 ’79-’04 Mustang, 302-351W $145.95
3531 ’79-’04 Mustang, 302-351W 3694 3692
With Danny B or Jesel Belt Drive $154.95
3698 Ford 351 Cleveland $126.50

22 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 22 11/21/14 9:37 PM

 MOUNTS AND LIMITERS

Motor Plate Mount Kit Lenco/Liberty Transmission Mount

Designed for tube chassis cars, our motor plate Installing, maintaining or removing your Lenco/Liberty transmission is now
mount kit contains brackets with flats allowing you easier with our ‘slide-in’ transmission mount kit. Made from 4130 chrome
to slide the motor into place correctly aligning with moly steel for light weight and strength. Kit includes everything needed to
mounting holes for quick changes. Kit includes fabricate a quick change trans mount.
mounting brackets, spacers and Grade 8 hardware. PART# DESCRIPTION # 5105
5105 Lenco Transmission Mount $74.95
5106 Liberty Transmission Mount $74.95
5107 Bruno Mount $74.95

Engine Torque Limiters and Travel Limiter

Prevents forward or rearward movement of the engine and the
transmission in it’s mount. A travel limiter can also
improve shift quality while improving reaction time. # 5050
Includes: chassis brackets, engine mounts, rod ends,
hardware and instructions.
PART# DESCRIPTION
5050 Engine Torque Limiter $39.95
PART# DESCRIPTION
5052 Engine Travel Limiter (Universal) (pictured) $59.95
3690 Motor Plate Mount Kit w /Rests $29.95 pr
5053 Chevy Travel Limiter $64.95
# 5052

‘PRO’ Mid Plate Mount

Designed for tube chassis cars, these mounts
securely mount the mid plate to the chassis and Removable Transmission Cross Members and Mount
help eliminate forward or backward movement of Designed to allow for quick and easy transmission removal, these cross members can be used with
the drivetrain under extreme acceleration loads. either round or box tube applications. Complete with trans mount, frame tabs and hardware available
in standard or dropped.

# 5100

PART# DESCRIPTION
5100 40” Transmission Cross member $59.95
5102 3.5” Drop Transmission Cross member $69.95 # 31108G
31108G Polyureathane Mount $31.25

PART# DESCRIPTION
3689 PRO Mid Plate Mount $42.95 pr Quick Removal Flanges
Our flanges provide a method for making most any tubular part of your car like a transmission
crossmember removable by simply removing the mounting bolts on either end. Each flange is laser cut for
Shifter Mounts the size tubing being used and features four 3/8” grade eight nuts and bolts. Accepted by NHRA.
Our shifter mount kit includes the parts required PART# DESCRIPTION
to fabricate a sturdy, lightweight and removable 8240 1 1/4” flanges, four $22.95
platform for mounting any popular shifter 8241 1 3/8” flanges, four $22.95
8242 1 1/2” flanges, four $22.95
8243 1 5/8” flanges, four $22.95
8244 1 3/4” flanges, four $22.95

# 5800 *For Chromoly flanges add “C” to end of part number $31.95

Flush Mount Flanges

Flush mount flanges are perfect for transmission crossmembers that are
close to the floor or the floor lays on the crossmember. The flange is only
3/16” above the tube.
PART# DESCRIPTION PART# DESCRIPTION
5800 Shifter Mount $49.95 8245 1 5/8” Flush mount flange, four $22.95
*For Chromoly flanges add “C” to end of part number $31.95

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 23

2015 CE CATALOG.indd 23 11/21/14 9:37 PM

 BOTTLE MOUNTS / FUEL TANKS

NOS Bottle Mounts Racing Fuel Tanks

Our NEW lightweight steel bottle mounts are the pro’s choice for Chassis Engineering fuel tanks
mounting any nitrous bottle securely and professionally in any race manufactured by Jaz redefined
car. Available in several different styles to fit any application, they are “standard-of-the industry”. Designed
shipped unfinished and ready for plating or painting after permanently to be superior in both materials and
welded or workmanship our tanks may cost
# 4498
bolted in place a little more but the added quality
with built-in and safety are well worth it. Made
mounting tabs. The # 5501 # 5500 from black polyurethane that is both # 4499
new bottle mounts thicker and stronger, our tanks resist
are up to a pound the flexing and sagging common to
lighter then the old other tanks. The tanks include a 2” # 4501
ones. They feature sump with AN-8 aircraft fittings and
rubber on all surfaces aircraft filler with vent. All of our tanks
that touch the sides of the bottle along with aluminum include an AN-8 vent with a positive
# 4503
mounting rods and easy grip hold down knobs. ball type check valve to prevent
Designed for 10 pound bottles. spilling in the event of a rollover.
15 pound bottle mounts Chassis Engineering fuel tanks are
are also available. available in a variety of sizes to fit your
application. # 4509

Attention: Foam must be removed

when using alcohol
# 5503 # 5502

PART# DESCRIPTION L x W x D
4498 2.0 Gallon Front Mount Cell $324.95
4499 3.0 Gallon Front Mount Cell $339.95
PART# DESCRIPTION 4501 4.0 Gallon Tank 9” x 10” x 17” $148.95
5500 Dual Nitrous Bottle Mount, Stand Up $152.95 4503 5.0 Gallon Tank 13” x 13” x 8” $140.95
5501 Single Nitrous Bottle Mount, Stand Up $104.95 4505 8.0 Gallon Tank 20” x 15” x 7.5” $151.95
5502 Dual Nitrous Bottle Mount, Lay Down $152.95 4507 12 Gallon Tank 17.5” x 16” x 10” $167.95
5503 Single Nitrous Bottle Mount, Lay Down $104.95 4509 16 Gallon Tank 25” x 17” x 9” $218.95
5520 Ball Valve Mounting Bracket $2.00 # 5520 Fuel Tank Mounting Kits $ 32.50

Front Mount Fuel Tank Mounts Fuel Tank Sump Kit Radiator Overflow Bottle
These front mount round tube fuel cell mounts Never designed for competition, most stock Made by Jazz Products, these
are engineered to be used with either the 2gal. fuel tanks have the fuel pick-up located at the injection molded poly tanks have
or 3gal. Pro Stock style tanks mounted in front of front. Your stock sump can go dry under hard a full pint capacity. 1/4” threaded
the engine. Includes 1 1/4” x .065” 4130 moly acceleration while racing causing your car to inserts for easy mounting and a drain
surround pipe, slip fit chassis receiver tubes, stumble. Our kit moves the pick-up to the rear valve. Its light color allows you to see
mounting tubes and strap. of the tank and provides a good constant supply how much fluid has been collected.
Does not include fuel cell. of fuel to the line. Made of mild steel for easy Meets all sanctioning organizations
welding and has 3 pre-welded 1/2” NPT bungs requirements for a 1 quart overflow.
to assure adequate fuel flow under severe PART# DESCRIPTION
conditions. Includes instruction and template for 3403 Radiator Overflow Bottle $20.95
simple installation. 3405 Aluminum Overflow Bottle $79.00
# 4512
Fuel Door Kit

PART# DESCRIPTION
4512 2 gal. front fuel cell mount. $169.95 PART# DESCRIPTION PART# DESCRIPTION
4513 3 gal front fuel cell mount $169.95 8077 Fuel Tank Sump Kit $74.95 4492 Fuel Door Kit 6” X 6” $59.95

24 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 24 11/21/14 9:37 PM

 COOLING / BODY HARDWARE

Front End Mounting Kit

Pro All Aluminum Radiators Contains all the necessary 3/8” x .058” DOM tubing, panel fasteners tabs,
buttons, springs and a bending fixture to fabricate bracketry required to mount a
• All aluminum construction, including side tanks fiberglass or steel front end at the “a-pillar” behind the front wheel.
• 21.5” x 13” high, 2 1/4” thick
• Built-in mounting locations for easy mounting
• Left and right hand available to fit Ford, Chevy, & Mopar
• Top inlet is 1-1/2” O.D. , bottom outlet is 1-3/4” O.D.

PART# DESCRIPTION
3401R All Aluminum Right Hand Pro Radiator $314.95
3401L All Aluminum Left Hand Pro Radiator $314.95
3404 Radiator Shroud w/Fan $216.19

PART# DESCRIPTION
4112 Front End Panel fasteners Kit $119.95

Front End Mount

Designed to mount one-piece front ends on either factory or tube chassis.
These kits contain the necessary tubing and hardware to mount any
fiberglass front end on any chassis. The sportsman kit is made from mild steel
for easy fabrication and welding and has a slip together tube design to hold
the front end to the chassis. The
PRO kit is made of chromoly steel to
# 3401R be as light as possible. The PRO kit
has a C-style frame mount to hold the
front end to the
chassis. # 4115

# 4110

PART# DESCRIPTION
4110 Sportsman Front End Mount Kit $129.95
4115 Light Weight ‘Pro’ Front End Mount Kit - Moly $139.95

12” Radiator Fan Body Mount Kit

This kit includes enough small diameter tubing, 8
# 3404 glass-in mounting plates and weld tabs to
PART# DESCRIPTION properly attach either a glass or steel
CAR 1012 Electric Fan $ 61.00 body to you’re tube steel chassis.

Radiator Mounting Kit

Features mounting posts and quick pins for fast easy radiator removal. Fits
Chassis Engineering radiators.

PART# DESCRIPTION
4111 Radiator Mounting Kit $ 34.95
PART# DESCRIPTION
4118 Glass-in Body Mount Kit $109.95

Hood Scoop to Carb Mount Kit

This simple kit makes mounting your hood scoop to the carb very easy when
you want the scoop seperate from the hood.
Fender Rings
Protect the fender opening when
5.875”

5.0”

using fender exit headers. Call for 5.0” 5.0”

custom sizes.
PART# DESCRIPTION
PART# DESCRIPTION
8205 Oval $17.50 ea
Custom Sizes Available 4116 Hood Scoop to Carb Mount Kit $26.95
8206 Round $17.50 ea

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 25

2015 CE CATALOG.indd 25 11/21/14 9:38 PM

 BODY HARDWARE

Door Hinge Kit Flush Mount Windshield Kit

Our one piece steel and two piece Chromoly pro door hinge kits are Designed for mounting lexan windshields and back glass. Kit includes 15 ft.
substantially lighter than factory hinges and allow for quick removal of of either 1/4” or 3/8” thick rubber to give you a flush, wind cheating finish.
fiberglass doors.The #4122 over the fender door hinges are for cars like the Kit includes 15 ft. of rubber and 50
63 corvette and 57 Chevy’s to where the front of the door needs to swing out stainless counter sunk allen
and over the fenders and not pivot behind it. heads and ny-lock nuts.

# 4121
# 4120
PART# DESCRIPTION
PART# DESCRIPTION 4912 Window Mounting Kit (1/4”) $44.95
4120 One Piece Sportsman Door Hinge Kit $ 79.95 pr 4913 Window Mounting Kit (3/8”) $44.95
4121 Two Piece Light Weight Pro Hinge Kit - Moly $129.95 pr
4122 Over The Fender Door Hinge $169.95 pr
Door Window Frame Kit
This kit includes everything you need to fabricate frames for lexan door
Door Latch Linkage Kit windows. Rather than being a “universal” shape that may or may not fit
This kit includes the necessary hardware to fabricate a simple, lightweight
your car, this kit includes a great bending jig that allows you to custom
door latch and handle mechanism that is easily installed in virtually any door.
form the frame to fit your car. Kit includes: 22 ft. of 5/16” x .058”
Parts are included for two doors. INCLUDES: 23” Aluminum Rod • Rod Ends •
mild steel tubing, bending
Handles • Hardware
fixture, stainless button
head socket cap screws,
nylock nuts and enough
weld-on tabs for two
windows.

PART# DESCRIPTION
4125 Door Handle and Linkage Kit $69.95 pr
Factory Striker and Latch required
PART# DESCRIPTION
Inside Door Handles 3912 Door Window Frame Kit (For two doors) $154.95
These door handles make the installation 3911 Additional Window Mount Tabs (25 pack) $ 13.75
of new inside door handles easy. Only
requires a small hole and flat mounting Upper Window Latch Kit
surface to install. Comes with long tabs Keeps airflow from pulling window away from the body at high speeds
for the latch to increase handle movement
to keep the door latched.

PART# DESCRIPTION
4126 Door handles $49.95 pr

Door Striker and Mount Kit

These small stainless door strikers are
ideal for race cars and easy to install
in any glass or steel car. They include
mounting hardware and instructions. PART# DESCRIPTION
Requires use of 93-99 Firebird or 1019 Upper Window Latch Kit $189.95 pr
Camaro latches.
PART# DESCRIPTION Door Limit Straps
4119 Door Striker and Mount Kit $64.95 pr These simple devices limit how far your fiberglass door can swing open to
prevent expensive damage from over-centering. Wrap one end around the
Slim Line Door Latches secondary door bar and bolt the other end to the bottom of
These slim line latches are perfect when the door window.
space isn’t an option on thin doors.
PART# DESCRIPTION
4130 Slim Line door Latch $68.95 pr PART# DESCRIPTION
1036 Door Limit Straps $54.95 pr

26 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 26 11/21/14 9:38 PM

 CHUTES AND ACCESSORIES

PART# DESCRIPTION
Parachute Pack Mount Kits 7602 Parachute Pack Mount $25.95
Our simple pack mounts provides a secure place to mount the chute pack far 7603 Pro Round Tube Parachute Single Pack Mount Kit (unwelded) $66.95
enough away from the back of the car to clear a large wing or spoiler. 7605 Pro Round Tube Dual Parachute Pack Mount (unwelded) $106.95
7606 Sportsman Single Parachute Pack Mount Kit $59.95
7607 Sportsman Double Parachute Pack Mount Kit $89.95

# 7602
#7603
# 7605, Shown Assembled # 7603, Shown Assembled Unassembled

Adjustable cable mount, end view

# 7606 # 7607

Parachute Mount Kit Parachutes

A very strong and simple parachute mount for all cars requiring a chute. Includes the necessary Cross form design for all cars up to 200 mph.
tubing, bracket and hardware. (Unwelded) Includes pack and pilot chute.
PART# DESCRIPTION
7601 Parachute Frame Mount Kit, Single $48.95 Typical mounting configuration shown.
7604 Parachute Frame Mount Kit, Dual $84.95 Mount tube not included.

# 7601 PART# DESCRIPTION

SIM 42040 Skyjacker 10 ft. Chute $399.95
RJS800-1022-4 RJS Chute – 10 ft. (4- line, 22 ft.) $364.99
# 7604 RJS800-1015-4 RJS Chute – 10 ft. (4- line, 15 ft.) $359.99

Parachute Release Cable Kit Weight Bar Mount Kit

Our Parachute release and lever kit This kit includes weld-on mounting tabs and 1/2” bolts
includes a high quality, 15 ft. cable with solid required to safely mount our weight bars in any car.
stainless inner cable and all the necessary
hardware. A reliable, smooth operating chute
release mechanism for any car.

PART# DESCRIPTION
PART# DESCRIPTION 3919 Weight Bar Mounting Kit $32.95
7600 Parachute Release Cable Kit $78.95 2919 Chromoly $44.25
7600D Dual Chute Handle Kit w/ Carbon Fiber Handle $139.95

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 27

2015 CE CATALOG.indd 27 11/21/14 9:38 PM

 BRAKES

Pedal Kits
Chassis Engineering pedal kits work as good as they look! All pedal ratios
have been figured to provide correct pedal geometry in order to maintain
proper brake line pressure, without binding or over centering the linkage.
Includes hardware and master cylinder bracket, in brake pedal kit.
PART# DESCRIPTION
3904 Master Cylinder Mount $ 20.95 # 4000 # 3904
4001 Accelerator Pedal Kit w/Hardware $ 58.95 # 4001 Master Cylinder Mount
# 4002/4003
4002 Brake Pedal Kit w/Hardware $104.95
4003 Clutch Pedal Kit w/Hardware $ 59.95
4000 Adjustable Gas Pedal Stop $ 19.95
(prevents over-centering of throttle linkage)
4806 Gas Pedal Toe Loop $ 27.75
# 4806

Pro Pedal Kits

Our all new “PRO” style pedal kits feature ultra light weight design,
state of the art appearance and feature needle bearing pivot points
for the most friction free operation available. This is the same pedal
assembly as found in todays Pro Stock and other Pro classes. # 4804

PART# DESCRIPTION
4000 Adjustable Gas Pedal Stop $19.95
4802 Pro Gas Pedal Kit $ 42.95
4803 Pro Brake Pedal Kit $159.95
4804 Pro Clutch Pedal Kit $ 89.95
New non-skid # 4803
4805 Pro Pedal Kit (includes all 3) $292.95
pedal pads
4806 Gas Pedal Toe Loop $27.75 # 4802

Throttle Linkage Kits

These throttle linkage kits are designed to be used with either gas pedal kit. The standard
linkage kit has a 23”, 3/8” aluminum threaded rod with spherical rod ends and hardware
which can be easily fit to any application. Or PRO kit is made from 1/2” Chromoly tubing
with weld in tube adapters and spherical rod ends and hardware. The PRO kit comes
with a sleeve and pin so the linkage rod can be split on the outside of the # 4004
firewall for easy engine removal without removing it from the gas pedal.
# 4005
PART# DESCRIPTION
4004 Pro Gas Pedal Linkage Kit $52.95
4005 Gas Pedal Linkage Kit $28.25

Brake Plumbing Kits

Brake installation kits take the guesswork out of brake # 4101
plumbing by including everything needed to do the job right.

Front Brake Flex Line Kit

This kit contains stainless steel flex line with factory installed -3 fittings on both
ends plus adapter and bulkhead fittings to convert from factory rubber lines.
Rear Brake Line Kit
This kit contains all the necessary parts to plumb your rear brakes with
-3 braided stainless line from frame to the rear end and both rear calipers. # 4103
PRO Plumbing Kit
This kit contains all the necessary parts to completely plumb any race car from
the master cylinder to each wheel. Includes 25 ft. of 3/16” hard line, braided
stainless lines for each wheel and frame to rear, adapter fittings, weld-on tabs,
bulkheads, line clamps and instructions. Does not include master cylinder fittings. # 4100
PART# DESCRIPTION PART# DESCRIPTION
4100 Front Brake Flex Line Kit $ 54.95 H/F 1910 20” Braided -3 stainless brake lines w/hose ends $13.95 ea
4101 Rear Brake Line Kit $ 94.95 H/F 1900 15” Braided -3 stainless brake lines w/hose ends $11.95 ea
4103 PRO Plumbing Kit $229.95 4105 25’ Roll 3/16” stainless steel brake line $65.95

28 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 28 11/21/14 9:38 PM

 BRAKES ELECTRICS
Master Cylinders Sheet Metal Battery Trays Battery Mount Kit
Chassis Engineering stocks Strange and Wilwood Easy-to-install battery trays for one or two batteries. A simple, easy-to-install battery mount system for
master cylinders that are compatible with These sheet metal battery trays lightweight and will tube chassis or cars that have rear subframe kits.
aftermarket and factory braking systems. accommodate virtually any standard automotive These tubular battery mounts are simple in design,
battery. lightweight and will accommodate virtually any
standard automotive battery.
# 4717

# 260-6764

# 4716
PART# DESCRIPTION
4716 Single Sheet Metal Tray $ 89.95
# 4006 Push
# B 3359 4717 Dual Sheet Metal Tray $104.95
Rod Retainer
PART# DESCRIPTION
Braille Super Sixteen 3712 Battery Mount Kit $49.95
Lithium-Ion Battery & Charger
At under 8 lbs it’s the lightest 16 Volt battery on the Bus Bar
market. The Super 16 Battery is not just lighter, but The correct way to hook up multiple hot leads or
WIL 260-1874 stronger and has grounds when wiring your race car.
the same power
as a 40 pound
WIL 260-1876 plus battery. Group
WIL 260-2220
34 “mini” size
bolts directly into # 1027
PART# DESCRIPTION the most popular
WIL 260-6764 3/4” Bore Master Cylinder $49.99 mounts without
WIL 260-6765 7/8” Bore Master Cylinder $49.99 need for special
WIL 260-6766 1.0” Bore Master Cylinder $49.99 fabrication. Sealed safe lithium packaging design # 1029-2
STRB 3359 Dual Master Cylinder, 1-1/8 Bore $99.50
means no spill, no corrosion and no worries. Safe for
WIL 290-0633 Hi Temp Brake Fluid, 12 oz. $6.65 ea PART# DESCRIPTION
STRP 2356 #3 x 1/2” - 20 Adapter Fitting $8.82 ea
both the environment and your race vehicle. 1027 Bus Bar $18.95
STRP 2357 #3 x 9/16” - 20 Adapter Fitting $8.82 ea Braille Battery & Charger $1895.00 1029-2 Weld On Bus Bar Mount $ 3.89
C/E 4006 Master Cyl. Push Rod Retainer $29.95
WIL 260-2220 Adj. Proportioning Valve $41.94
WIL 260-1874 2-4 lb. Residual Pressure Valve $17.94
Accessories Gauge Panels
WIL 260-1876 8-10 lb. Residual Pressure Valve $17.94 We offer a wide variety of hard to find accessories Made from .050” moly steel, these gauge panels
that make car building easier. Finally a great little are designed to compliment the use of either
kit to put a starter button under the hood. No more fiberglass or aluminum dashes.
Remote Master Switch Linkage hook ups or hassles. Another great accessory is our
This neat linkage kit allows you to mount your ground stud kit. Perfect for creating ground points on
master kill switch inside the body on the frame – your chassis.
then operate the switch with the lever from outside
the vehicle. The aluminum push/pull rod can be
shortened to fit virtually any location. Includes mount
and hardware.

# 4710
# 3713

# 4711
# 1020
# 5610 Gauge Mounting Kit

PART# DESCRIPTION
# 7410 5600 3 hole panel for 2-5/8” gauges $ 9.95
PART# DESCRIPTION 5601 4 hole panel for 2-5/8” gauges $17.95
4710 Ground Studs 5 Per Pack $39.95 5602 5 hole panel for 2-5/8” gauges $17.95
PART# DESCRIPTION 4711 Remote Starter Button $24.95 5603 5 hole panel, Four 2-5/8” and One 3 -3/8” $17.95
3713 Remote Master Switch Linkage $46.50 1020 Charging Lug Kit $48.00 5604 Race Pak Dash $17.95
7410 Master Disconnect Switch $33.50 5610 Dash Mounting Kit $12.95

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 29

2015 CE CATALOG.indd 29 11/21/14 9:38 PM

 INTERIOR SHEET METAL

Fire Wall Kit Transmission Tunnel Kits

Our universal fire wall kit can be used as a replacement for a factory Our universal and Lenco trans tunnel kit can be easily modified to fit most
firewall or with tube chassis cars. This universal firewall kit is 60” wide chassis and transmissions. Includes driver and passenger side tunnel
and 24” tall and includes steel cowl and A-pillar caps. Easily trimmed to halves, for easy access, driveshaft cover and matching floor pieces.
fit most cars.

cowl cap 12” x 60” # 8020

end caps
1/2” lip 12” x 24” 36”
long

widt tunn
h 20 el ht
” . 14” 30”
long
10” tall
# 8080

e
wid
PART# DESCRIPTION

20”
8080 .040 Aluminum Firewall Kit $149.95
8081 .024 Steel Firewall Kit $149.95 14” tall

Fire Wall Flange Kit

Allows for easy tunnel removal for easy access to clutch and transmission.

# 8035

36” wide

24” tall
# CF 8020
14”

20”
PART# DESCRIPTION
8020 .040 Aluminum Transmission Tunnel Kit $169.95
PART# DESCRIPTION 8021 .024 Steel Transmission Tunnel Kit $169.95
8035 Aluminum Flange Kit for Firewall $55.95 CF8020 Carbon Composite Trans Tunnel $799.99

Floor Kits
Available in steel or aluminum our floor kits are 24” x 60” and can be easily trimmed to fit most applications.
# 8025
12”
32”
36”

60”

24”
8”
”
16

PART# DESCRIPTION
8045 Front Floor Kit .040 Aluminum $119.95
8046 Front Floor Kit .024 Steel $119.95 PART# DESCRIPTION
8025 .040 Aluminum Lenco Tunnel Kit $169.95

30 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 30 11/21/14 9:38 PM

 INTERIOR SHEET METAL

Rear Fire Break Kit

Used as an aluminum partition or fire break between trunk mounted
batteries and fuel tank and passenger compartment. Fills the area
between the wheel tubs when the back seat is removed. Easily trimmed to
20” tall
fit most cars.
PART# DESCRIPTION wide
4” 32”
8070 Rear Fire Break .040 Aluminum $60.95 10” x 2
8072 Rear Fire Break .024 Steel $60.95

Rear Floor Kits

All panels are oversized to fit frame rails widths from 20” to 32”. Designed
to work with four-link or ladder bar rear frame kits. These kits contain the
necessary pieces to install the rear floor in most cars from the vertical
section of the frame rails to the rear bumper. All pieces are oversize and
can be easily trimmed for a custom fit.

PART# DESCRIPTION
8040 Ladder Bar Rear Floor Kit, .040 Aluminum $239.95
8041 Four-link Rear Floor Kit, .040 Aluminum $239.95
8050 Ladder Bar Rear Floor Kit, .040 Steel $239.95
8051 Four-link Rear Floor Kit, .040 Steel $239.95 easily trimmed to fit frame rail
widths 20”-32”

Aluminum Door Panel Kit

Suitable for most cars, our oversize door panels measure 22” x 50” and
can be easily trimmed for a custom fit. Pre beaded with a rolled top lip for
a professional fit and finish and made from .040” aluminum for strength.
50”

all
Kit includes two door panels and two quarter panels. wide

”t
22
PART# DESCRIPTION
8060 Aluminum Door Panel Kit $179.95

tall
30”

22”
wide

Aluminum Dash Board

Designed to fit just about any size car this universal dash is made from
.040” aluminum, and a full 60” wide with end caps. Easily trimmed to fit,
our dash will add a professional finish to your car.
PART# DESCRIPTION 60”
8030 Aluminum Dash Board $124.95

Carbon Dash 13-1/2”

6”

3-1/2”

PART# DESCRIPTION
CF2000 Carbon Composite V-net Dash $375.00
CF2001 Fiberglass V-Net Dash $299.99

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 31

2015 CE CATALOG.indd 31 11/21/14 9:38 PM

 SHEET METAL

Wheel Wells
Choose from four different wheel wells that work with virtually any tire size. Specifically
designed for use with 2 x 3 or round tube rear frame rail kits, Chassis Engineering wheel wells
are 23” wide and 40” long. The Pro tubs are 28” X 45” and the intermediate wells are 28” wide
and 40” in length. All wheel wells are shipped unassembled and incorporate a “Pittsburgh”
seam that allows for easy assembly. Call for custom sizes.

PART# DESCRIPTION
3681 23” x 40”-.040” Aluminum Sportsman Wheel Wells $149.95
3682 23” x 40”-.024” Steel Sportsman Wheel Wells $ 94.95
3685 28” x 45”-.040” Aluminum Pro Wheel Wells (not beaded) $209.95
Oversize frieght
3686 28” x 40”-.040” Aluminum Intermediate Wheel Wells (not beaded) $199.95
CF 1700 46” Carbon/Glass Wheel Tubs (pr) $700.00
CF 1701 46” Carbon Composite Wheel Tubs (pr) $1,000.00
Oversize frieght

Adjustable Rear Spoiler Kit with “Wickerbill”

A universal rear spoiler kit that features an adjustable wickerbill, (the
raised lip at the back of a wing or spoiler), for fine tuning of downforce
and wind resistance. Made from .063” aluminum, 16” deep and 60”
wide for trimming and fitting to virtually any car. Includes aluminum
hinges, four chrome moly adjustable strut rods, oversize spill plates and
NACA ducts for positive chute deployment.

PART# DESCRIPTION
8011 Pro Adjustable Rear Spoiler, Pre-Bent Wickerbill $295.95
8016 Additional Strut Rods for Wing (each) $ 45.95 # 8011
(Includes aluminum mounting brackets,
nuts and bolts. Does not include
Quick Release Pins. )
8017 Adjustable Winkerbill Spoiler Kit $295.95
8015 Pro Strut Rod Kit $215.28

Carbon Fiber for 1969 Camaro and Fox Body Mustang

CF2010 Carbon Composite Wing 69 Camaro $552.50
CF2011 Carbon Composite Wing 67-68 Camaro $552.50
CF2012 Carbon Composite Wing 83-93 Mustang $552.50
CF2016 Carbon Composite Universal Wing $500.00
Strut Rod Kits Sold Separately

# 8017

NACA Ducts

# 8015

32 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 32 11/21/14 9:38 PM

 SHEET METAL TOOLS

Panel Fasteners
Chassis Engineering panel fastening components are designed for
quick removal of body panels, front ends and interior panels. We
also have a complete selection of brackets, springs, tools, studs, and # 2815 #2816 # 2875 # 2870 # 2830 # 2835 # 2820 # 2825
buttons for virtually any quick release requirement.
PART# DESCRIPTION
3990 LW Weld-On Panel Fasteners for Large Spring $1.05
3991 LW Weld-On Panel Fasteners for Small Spring $1.05
3999L Bolt On Fastener Bracket, Left $3.88
3999R Bolt On Fastener Bracket, Right $3.88
3998L Weld On Fastener Bracket, Left $1.65 # 2850 # 2865 # 2860
3998R Weld On Fastener Bracket, Right $1.65
# 2855
2860 Small Panel Fastener Spring $ .83 # 2885
2865 Large Panel Fastener Spring $ .83
2815 Wing Style .450 Steel Oval $2.21 # 2880
2814 Wing 5/16” Stud .400 Steel Oval Head $2.21
2816 Stud .450 Steel Oval Head $1.54
2817 5/16” Oval Head Stud .400 $1.54
2818 Stud .400 Steel Oval Head $1.54
2819 Stud .450 Steel Oval Head $1.54

2870 Stud .500 Steel Flush Head-Counter Sunk $1.54

# 3990
2875 Stud .550 Steel Flush Head-Counter Sunk $1.62
2830 Stud .500 Aluminum Flush Head-Counter Sunk $1.72
2835 Stud .550 Aluminum Flush Head-Counter Sunk $1.72
2820 Stud .500 Steel Oval Head $1.54 # 3991
2825 Stud .550 Steel Oval Head $1.62
2828 Stud .400 Aluminum Flush Head $1.72
2829 Stud .450 Aluminum Flush Head $1.72
2868 Stud .400 Steel Flush Head $1.54
2868 Stud .450 Steel Flush Head $1.54

2880 Button .500 Small Flush-Self Ejecting $2.35

2885 Button .550 Small Flush-Self Ejecting $2.39
2850 Button .500 Pro/Stock Flush-Self Ejecting $2.54
# 3998 R # 3998 L
2855 Button .550 Pro/Stock Flush-Self Ejecting $2.56

2842 Spring Adjusting Tool $42.05

2886 Button Removal Driver $21.00
2887 Pocket Button Driver $ 3.95

Cleco And Cleco Pliers

PART # DESCRIPTION
8100 Pliers Only $19.95 # 3999 L # 3999 R
8101 30 pk. of 1/8” Clecos $34.95
8105 30 Clecos and Plier Kit $54.90
8120 Tin Installation Kit $11.50

# 2887 Pocket Button Driver # 2886 Button Removal Driver

# 8105 Cleco & Plier Kit

# 2842 Spring Adjusting Tool
# 8120 Tin Installation Kit

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 33

2015 CE CATALOG.indd 33 11/21/14 9:38 PM

 REAR END HOUSINGS

Fabricated Rear End Housing

Chassis Engineering offers one of the toughest custom fabricated 9” housings available in mild steel
or chromoly. Laser cut, diamond design housing, 3/8” thick multi-layered face plate, internal braces
for the axle tubes and face plate are standard features offering unmatched strength and accuracy.
Housing ends, drain, filler bung, vent and studs
are included with all rear end housings.

PART# DESCRIPTION
Mild Steel – 3” x .250” axle tubes standard
4225 56” wide with housing ends not welded $529.95
4226 Any width with housing ends welded $589.95
4227 Any width with housing ends and back brace welded $729.95

Chromoly – 3-1/2” x .250” moly axle tubes standard

4235 Specified width w/ housing ends not welded $859.95
4236 Any width with housing ends welded $929.95
4237 Any width with housing ends and back brace welded $1199.95

Weld-up Housing Kit

Fabricate you own housing using Chassis Engineering’s weld together kit. Each kit,
moly and mild steel, have all the components to successfully weld a fabricated 9”
center together. Axle tubes are sold separately – allowing you to order the exact length
needed. The Mild steel kit is designed for 3” Mild Steel axle tubes and the Moly is
designed for massive 3-1/2” Moly axle tubes.

PART# DESCRIPTION
4210 Mild Steel Weld-up Kit $134.50
4240 Chromoly Weld-up Kit $210.95
M/E 8999 Replacement housing studs for center, 10 pack $26.54
Axle tubing and housing ends sold separetly

Precision Housing Ends

PART# DESCRIPTION
C/E 4293 Housing End Stud Kit (3/8”) $49.95 STR H-1135* Big Ford Housing Ends $70.00 pr *NOTE: THESE ENDS
STR H-1132 ‘49 to ‘64 Olds Housing Ends $70.00 pr STR H-1137* Big Ford, New Style Housing Ends $70.00 pr WILL NOT WORK WITH
STR H-1133* Dana/Mopar Housing Ends $70.00 pr STR H-1142 Scalloped Olds Ends $93.00 pr O.E.M. BEARINGS
STR H-1134* Small Ford Housing Ends $70.00 pr

# 1142

34 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 34 11/21/14 9:38 PM

 COMPLETE REAR ENDS

Complete 9” Center Sections

Let us build you a state-of-the-art Ford center section using the best components
available from Strange Engineering, Richmond or U.S. Gear. Our assembly staff
has over 20 years of experience assembling center sections for professional and
sportsman racers alike. Call us today, we’ll make sure you don’t leave your rear on
the line!

PART# DESCRIPTION
4150 Complete Ford 9” Center Section with Strange Nodular Iron Case, Spool, Heavy
Duty Pinion Yoke, Your Choice of Pro Gear, Aluminum Pinion Support, Steel Caps
and Adjusters, New Bearings, Shims, Special Machining and Completely Assembled

31, 33, 35 Spline From $1,350.00

40 Spline From $1,450.00
Aluminum Case Add $ 50.00

Dana 60 Assembled and race ready

The Dana 60 is the strongest and
most economical rear you can buy.
Dana 60 from $1,699.00
Chassis starts with a new Strange
case and builds up from there with
new tubes, ends and more. It is
ideal for heavy, high horsepower
applications like bracket racing or
“Fastest Street Car” type racing
where low maintenance and bullet- PART# DESCRIPTION OPTIONS
proof performance is essential. This is 4200 Complete assembled Dana 60 rear, any width, 5/8” Axle Stud and Lug Kit Add $ 58.50
the rear if you want to “install it and any housing ends, Standard gear of your choice, Spicer Positraction Unit Add $ 139.88
forget it”. Strange 35 spline spool, Moser axles, Pro Gear of Your Choice Add $ 71.00
1350 series yoke and 1/2” x 3” axle studs Heavy Duty Wilwood Disc Brake Kit Add $485.95
Strange Pro Race Axles Add $ 65.25
From $1,699.00
NOTE: Axle bearings not pressed on complete rears for brake installation.

Housing Filler Cap

These billet style cap assemblies can be used as a filler neck on water tanks, oil tanks PART# DESCRIPTION
or rear ends. The cap is precision machined from aircraft quality aluminum, 4381 Filler Bung w/Aluminum Cap $26.50
has a knurled edge for easy removal and includes a rubber o-ring for a 4382 2” All Aluminum Filler Cap/Bung $26.50
4383 2 1/2” Aluminum Filler Cap/Steel Bung $39.78
clean, leak proof seal. Measures a full 1.75” across and includes
4384 2 1/2” All Aluminum Filler Cap/Bung $39.78
steel or aluminum bung for welding. #4381

9” Back Brace
Designed to prevent flex and warping under high torque loads our back brace greatly PLEASE SPECIFY WIDTH OF
increases the strength of the Ford 9”. Kits are precut to require minimum fitting. Braces BRACE, TYPE OF HOUSING
are made to your specifications when ordered. Must have spec sheet filled out. AND PINION OFFSET WHEN
ORDERING. ALLOW 3 DAYS
PART# DESCRIPTION
LEAD TIME. ALL BACK
4275 Ford Back Brace $109.95
4239 Moly Back Brace $199.95 BRACES MADE TO ORDER.
Visit our web site for spec sheet

Universal Leaf Spring Perches Tie Down Rings

Adapts most any leaf spring to Our heavy duty weld-on tie down rings
any rear end. are designed to weld onto any chassis
3165 $31.50 pr to provide a secure place to attach a
ratcheting tie down or tow strap to any
race car.
8210 $10.95 pr

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 35

2015 CE CATALOG.indd 35 11/21/14 9:38 PM

 CENTER SECTIONS AND SPOOLS

Strange Nodular Iron And Aluminum Center Sections

Order the latest Strange Engineering nodular iron and aluminum center sections
from Chassis Engineering and let us help tailor your drivetrain needs. Cast from
D-4512 nodular iron or from aircraft quality aluminum these cases are designed
with additional material in critical areas for extra strength. Complete with steel
bearing caps, grade 8 cap screws and solid steel adjusters. Much stronger
than stock center sections these are specifically designed for racing...and are
anything but Strange!

PART# DESCRIPTION
STR N-1905 Strange Case for 9” Ford, 3.062” Bore, Nodular Iron $329.00
STR N-1906 Strange Case for 9” Ford, 3.250” Bore, Nodular Iron $329.00
STR N-1901 Strange Case for 9” Ford, 3.062” Bore, Aluminum $379.00
STR N-1904 Strange Case for 9” Ford, 3.250” Bore, Aluminum $379.00

Strange HD 9” Case Kits

Strange Engineering’s new HD case features through bolt design, new larger
pinion support, Tail bearings, Retainers, shims.
PART# DESCRIPTION
STRP -3203 3.250 HD Through Bolt Case Kit $684.00
STRP-3207 3.812 HD Through Bolt Case Kit $684.00

Spools
Spools are manufactured to exacting specifications on computer controlled lathes by PART# DESCRIPTION
STR D-1548 Dana 60 Lightweight Spool, 35 Spline $219.00
Strange Engineering and are ultra strong yet very light. Strange spools STR D-1558 31 Spline Ford 8.8” $189.50
allow the use of axles up to 40 spline that deliver a tremendous STR D-1560 33 Spline Ford 8.8 $189.50
increase in axle strength, while positively locking both axles to STR D-1553 31 Spline L/W Ford 9” Spool $189.50
assure both tires rotate at the same speed...plus STR D-1554 33 Spline L/W Ford 9” Spool $189.50
help eliminate many rear end problems STR D-1555 35 Spline L/W 9” Spool, 3.250” Case $189.50
caused by the deflection of ring gear STR D-2000 40 Spline Spool Ford 9”, 3.250” Case $279.50
mounting surfaces on stock carriers. STR D-1549 33 Spline L/W Chevy 12-Bolt Spool $189.50
STR D-1551 30 Spline L/W Chevy 12-Bolt Spool $189.50
STR D-1547 35 Spline Dana 60 4:10 & Under $219.00
Spools are not recommended for street use! STR D-1550 57-64 Olds 35 Spline $219.00
STR D-1556 30 Spline Mopar 8-3/4 $189.50
STR D-1557 35 Spline Mopar 8-3/4 $189.50
STR D-1524 GM 8.5 33 Spline Spool $149.50

Spool Bearings Pinion Center Plate

Chassis Engineering spool bearing kits include This handy device positively locates the pinion centerline on Ford
everything necessary for the correct installation of 9”, Dana 60, 8 3/4, Olds and 12
all Strange Engineering lightweight spools. Sold in Bolt housings. Makes it easy
pairs only. to position the housing
correctly in the chassis.
PART# DESCRIPTION
4370 Spool Bearing Set, Dana $69.50 pr PART#
4372 Spool Bearing Set, Chevy 12-Bolt, Ford 8.8 $63.50 pr 4538 $24.95
4377 Spool Bearing Set, Ford 9” w/2.891” Bore Case $63.50 pr
4378 Spool Bearing Set, Ford 9” w/3.062” Bore Case $69.50 pr
4379 Spool Bearing Set, Ford 9” w/3.250” Bore Case $38.00 pr
STR D-1585 GM 8.5 Spool Bearings $36.00

36 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 36 11/21/14 9:38 PM

 DRIVELINE

Ford 9” Pinion Supports

The OEM pinion support is the weak link in an otherwise strong Ford 9” rear end housing. The addition of
Strange Engineering’s heavy duty aluminum front pinion support substantially increases the housing strength
and reliability–and virtually eliminates the possibility of the pinion being driven out the front of the case. Kits
are available for either the standard size or the popular oversize pinion by simply ordering the bearing kit for
your application. No other parts are required–kits include everything you need for an easy bolt-in installation.
PART # DESCRIPTION
STR N-1922 Strange 9” Ford Pinion Support $126.00
STR N-1923 Bearing Kit for Stock Size Pinion. $ 59.50
STR N-1924 Bearing Kit for Oversize Pinion $ 59.50

Pinion Yokes, Transmission Slip Yokes, Couplers & U-Bolt Kits

To simplify the installation of any combination of transmission, driveshaft and rear end, we stock a wide variety of Strange and
Spicer driveline components. All items have been carefully selected to provide a trouble-free reliable driveline.
PART # DESCRIPTION
STR U-1598 Moly Dana 60 Pinion Yoke (Series 1350) $141.35
STR U-1600 Super Duty Dana 60 Pinion Yoke (Series 1350) $ 49.00
STR U-1602 Super Duty 12-Bolt Pinion Yoke (Series 1350) $ 89.50
STR U-1603 Super Duty Ford 9” Pinion Yoke (28 Spline) Stock (Series 1350) $125.00
STR U-1604 Super Duty Ford 9” Pinion Yoke (35 Spline) (Series 1350) $125.00
STR U-1627 Super Duty Pinion Yoke to Adapt Dana 60 to G.M.Driveshaft (Series1310) $ 49.00
STR U-1610 3/8” U-Bolt Kit for U-1598, U-1602, U-1603, U-1604 Yokes $11.00 pr
STR U-1610HD HD Caps for Strange 1350 Rear End Yokes $82.50
STR U-1611 Strap Kit for U-1600 $11.00 pr
STR U-1612 Strap Kit for U-1627 $11.00 pr
STR U-1664 Strange forged yoke for TH-400 $179.00
STR U-1677 Strange forged slip yoke for Pwr Glide, TH-350, T-10 27 spline $189.00
STR U-1677N Strange forged slip yoke for needle bearing Pwr Glide tailshaft $204.00
CE4324 Transmission Slip Yoke-Turbo-350, Pwr Glide & 1st Design Super T-10 $ 75.00
CE4325 Transmission Slip Yoke-Turbo-400, 2nd Design Super T-10 & Doug Nash $ 89.00
CE4327 Transmission Slip Yoke-Turbo-350, Pwr Glide (1350 series) $ 89.00

C-Clip Eliminator Kits

These kits eliminate the under designed factory C-Clip on Chevrolet 12-bolt rear end housings and provide a safety hub with
sealed press-on bearings. This kit is required for use with Strange Engineering axles. Also available for stock factory-type
axles. Approved by all racing associations. Sold in pairs.
PART # DESCRIPTION
STR A-1030 C-Clip Eliminator Kit for Strange Engineering, Axles in 12-Bolt Hgs.(Except Impala) $131.00 pr
STR A-1031 C-Clip Eliminator Kit for Strange Engineering, Axles in 12-Bolt Hgs.(Impala) $165.00 pr
STR A-1032 C-Clip Eliminator Kit for Stock Axles in 12-Bolt, Hgs. (Except Impala) $144.00 pr
STR A-1090 C-Clip Eliminator Kit for Strange Axles in Ford, 8.8” Hgs $130.20 pr
STR A-1092 C-Clip Eliminator Kit for Stock Axles in Ford, 8.8” Hgs $141.25 pr
Replacement Bearings, Gaskets, & Seals
STR A-1032c Bearings for STR A-1032 $ 42.95 ea
C/E 4391 Bearings for STR A-1030 & STR A-1031 $ 36.95 ea
STR A-1030e Gaskets for STR A-1030 & STR A-1032 (No gasket is available for STR A-1031) $ 1.95 ea
STR A-1030c C-clip seals for STR A-1030 & STR A-1032 $ 10.75 ea

Super Duty Universal Joint

Superior strength, race proven these U-joints can be used in conjunction with Chassis Engineering’s pinion yokes.
PART # DESCRIPTION
B STR U-1641 Super Duty (1350) U-Joint for U-1600, U-1602, U-1603, U-1604 Pinion Yokes, $29.00

A 3-5/8” Chromoly Driveshafts

B 1-3/16” Our 4130 chromoly driveshafts are available in several configurations to meet the needs of everything from
Type Super Duty 1350 A
bracket racers to Pro Modified. They feature 3” x .083” seamless moly tubing, 1350 series U-joints, phased
weld ends and are electronically balanced to within .008” run-out. Each shaft is custom built to order and
takes approx one week for delivery. Must have spec sheet filled out.
PART # DESCRIPTION
STRU-1699 Moly driveshaft, 1350 series Spicer HD weld yokes MIG welded
with 1350 Spicer HD u-joints $239.00
STRU-1702 Moly driveshaft, 1350 series Strange forged moly Weld yokes,
TIG welded w/ultra impact solid u-joints $319.00

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 37

2015 CE CATALOG.indd 37 11/21/14 9:38 PM

 AXLES

Strange Engineering Axles and Spools

Strange Engineering axles are manufactured from the finest high nickel alloy steel, heat-treated, one piece forgings
available. This is the same as material used in some military aircraft landing gear and offers a maximum tensile strength
of 240,000 psi while maintaining a high degree of ductility. This combination of characteristics gives Strange Engineering
Axles tremendous impact strength and the ability to transfer exceptionally high torque loads without breakage. All Strange’s
33 spline axles are warrantied against breakage for two years and their 35 and 40 spline axles are warrantied five years.
Chassis Engineering carries axles in a variety of lengths and splines to accommodate most any housing width. Call one of
the Chassis Engineering tech advisors for any of your housing, axle or center section questions.

DESCRIPTION PRICE
30 - 35 Spline Axles $410.25 pr
40 Spline Axles Gun Drilled With 5 Lighting Holes $522.50 pr
*Studs and bearings sold seperately

Street Strip Axles

These axles are suitable for either street or racing applications. They are designed to handle both
the high torque loads of drag racing as well as high cornering loads which makes them ideal for
today’s multi-purpose, high performance applications. Many popular styles are in stock for immediate
shipment, and custom applications can be delivered in one week or less. Special orders must be
prepaid by either credit card or money order.
Features:
• Made from premium quality alloy, induction treated and 100% magnafluxed
• Safe for either street or racing applications
• Replacement guarantee on 33 or more spline
• Contingency sponsor
PART# DESCRIPTION
28 to 35 spline axles $367.00 pr
26 to 33 spline axles, c-clip style $313.80 pr
40 spline axles gun drilled with 5 lightning holes $627.50 pr
Studs and bearings sold seperately
M/E 9000 C-Clip Eliminator Kit for our axles in 10 & 12 bolt, except Impala & trucks $159.50 pr
M/E 9100 C-Clip Eliminator Kit for our axles in Impalas & trucks $159.50 pr
M/E 9200 C-Clip Eliminator Kit for Stock Axles, Except Impala & trucks $159.50 pr
M/E 9300 C-Clip Eliminator Kit for 7.5 & 8.8 Mustang, Capri & Fox Body Fords $159.50 pr

BRAKES
We sell the complete line of Wilwood and Strange brake kits. Call for availability and price.

38 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 38 11/21/14 9:38 PM

 AXLES

Steel Wheel Spacers Pinion Center Plate

This handy device positively locates
These 1/8” and 1/4” steel wheel spacers are stronger than aluminum and
the pinion centerline on Ford 9”,
perfect when you need just a little more room for tire clearance. Multi bolt
Dana 60, 8 3/4, Olds and 12 Bolt
pattern fits most common applications. Fits both 1/2” and 5/8” studs.
housings. Makes it easy to position
the housing correctly in the chassis.

PART#
4538 $24.95

PART# DESCRIPTION Rim Screw Template

5621 1/4” wheel spacers $8.95 ea The quickest and easiest way
5620 1/8” wheel spacers $7.95 ea we know of to properly mark
your wheels for the installation
of rim screws. Just hold up to
Axle Studs
any 15” wheel and mark the rim
Chassis Engineering
in the slots provided for perfectly
offers 3” axle studs in
spaced rim screw installation.
screw-in styles for most
applications. Our studs
PART #
meet or exceed the
8125 $19.95
safety requirements of all
sanctioning bodies and
are sold in sets of 10.
Bolt Circle Template
Determine what bolt circle your using
by simply placing our template over
the axle studs or wheel mount holes.
Includes:
5 on 5 1/2”
5 on 5”
5 on 4 3/4”
5 on 4 1/2”
5 on 4” bolt circles
PART# DESCRIPTION
STR A-1026 1/2-20 X 3” Screw in Studs $22.50 PART #
STR A-1027 5/8” Stud and Lug Kit for Use with Strange or Moser Axles $79.00 8126 $9.95
STRA-1036 5/8” Stud and Lug Kit .775 Shank $79.50
STRA-1037 5/8” Stud and Lug Kit .875 Shank $79.50
STRA-1038 5/8” Stud and Lug Kit .775 Shank $79.50

Axle Bearings And Retainers

Axle Bearings are available for many applications. In the case of the 8 3/4”
Mopar, Dana, and 9” Ford, they also act as approved safety hubs. They are
sold individually, and must be used to install STRANGE or MOSER axles.

PART# DESCRIPTION
4388 Dana/Mopar 8-3/4” Non-Adjustable Axle Bearings (Not for use w/Factory Housing Ends) OD 2.835”-ID 1.562” $36.95 ea
4389 Ford 9” Axle Bearings/ Safety Hub Plates (For Strange Engineering Axles, Small Ford Housing Ends) OD 2.835”-ID 1.562” $42.50 ea
4390 Olds/Big Ford(Old & New) Axle Bearings OD 3.150”-ID 1.562” $36.95 ea
4391 Olds/Big Ford (Old & New) Axle Bearings OD 3.150”-ID1.531” $36.95 ea
4392 Giant Ford Axle Bearings OD 3.150”-ID 1.772” $36.95 ea
4394 Small Ford/Mustang Axle Bearing and Retainers OD 2.835”-ID 1.531” $42.50 ea
STR A-1015 Early Olds Bearing Retainers $31.04 pr
STR A-1016 Big Ford Bearing Retainers $31.04 pr
STR A-1015 & STR A-1016 are not needed with Wilwood/Strange brakes

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 39

2015 CE CATALOG.indd 39 11/21/14 9:38 PM

 ROD ENDS AND HARDWARE

Spherical Rod Ends

We stock a complete line of both spherical and solid rod ends in the most popular sizes. These top quality rod ends
are ideal for the fabrication of all kinds of steering and suspension linkage. Includes jam nuts where required.

Mild Steel Rod Ends MA = High misalign TEF = Teflon lined Chromoly Rod Ends MA = High misalign TEF = Teflon lined HT= Heat Treated
PART# DESCRIPTION THREAD SIZE HOLE SIZE PRICE PART# DESCRIPTION THREAD SIZE HOLE SIZE PRICE

CM-3 Male-right hand 3/16” 3/16” $ 5.25 AB-6 Male-left hand 3/8” 3/8” $21.25
CM-3-Y Male-right hand 3/16” 10/32 stud $ 5.60 AM-6 Male-right hand 3/8” 3/8” $21.25
CW-3 Female-right hand 3/16” 3/16” $ 4.75 HJMX-7 Male-right hand M-A 7/16” 7/16” $65.55
CM-3-4 Male-right hand 1/4” 3/16” $ 6.60 AB-8 Male-left hand 1/2” 1/2” $29.95
CB-4 Male-left hand 1/4” 1/4” $ 4.50 AB-8-101 Male-left hand M-A 1/2” 1/2” $29.70
CM-4 Male-right hand 1/4” 1/4” $ 4.50 AM-8 Male-right hand 1/2” 1/2” $29.95
CM-4-Y Male-right hand 1/4 1/4”-28 stud $ 5.75 AM-8-101 Male-right hand M-A 1/2” 1/2” $29.70
CW-4 Female-right hand 1/4” 1/4” $ 5.55 AM-8-6 Male-right hand 1/2” 1/2” $29.95
CW-4-3 Female-right hand 1/4” 3/16” $ 5.55 AB-10 Male-left hand 5/8” 5/8” $46.75
CW-5 Female-right hand 5/16” 5/16” $ 5.00 AM-10 Male-right hand 5/8” 5/8” $46.75
MB-5 Male-left hand 5/16” 5/16” $ 9.25 RSBX-8 Male-left hand 5/8” 1/2” $33.00
MM-5 Male-right hand 5/16” 5/16” $ 9.25 RSMX-8 Male-right hand 5/8” 1/2” $33.00
CB-6 Male-left hand 3/8” 3/8” $ 5.55 RSMX-8-6 Male-right hand 5/8” 3/8” $39.29
CM-6 Male-right hand 3/8” 3/8” $ 5.55 RSXM-8-103 Male-right hand M-A 5/8” 1/2” $40.55
CW-6 Female-right hand 3/8” 3/8” $ 5.80 AB-12 Male-left hand 3/4” 3/4” $54.50
MM-6 Male-right hand 3/8” 3/8” $10.95 AM-12 Male-right hand 3/4” 3/4” $54.50
CB-7 Male-left hand 7/16” 7/16” $ 7.65 CBX-12 Male-left hand 3/4” 3/4” $29.25
CM-7 Male-right hand 7/16” 7/16” $ 7.65 CBX-12-8 Male-left hand 3/4” 1/2” $30.30
MB-7 Male-left hand 3-Piece 7/16” 7/16” $ 9.25 CMX-12-8 Male-right hand 3/4” 1/2” $30.30
MM-7 Male-right hand 3-Piece 7/16” 7/16” $ 9.25 CMX-12 Male-right hand 3/4” 3/4” $29.25
CB-8 Male-left hand 1/2” 1/2” $ 9.25 RSXB-10-8 Male-left hand H-T 3/4” 1/2” $73.15
CB-8-101 Male-left hand M-A 1/2” 1/2” $12.40 RSXM-10-8 Male-right hand H-T 3/4” 1/2” $73.15
CM-8 Male-right hand 1/2” 1/2” $ 9.25 RSXB-10 Male-left hand H-T 3/4” 5/8” $57.10
CM-8-6 Male-right hand 1/2” 3/8” $11.95 RSXM-10 Male-right hand H-T 3/4” 5/8” $57.10
CM-8-101 Male-right hand M-A 1/2” 1/2” $12.40 JM-16-T Male-right hand H 1 1/4” 1” $49.95
CW-8 Female-right hand 1/2” 1/2” $10.00 JML-16-T Male-left hand H 1 1/4” 1” $49.95
CB-10 Male-left hand 5/8” 5/8” $14.75 JMX-16-T Male-right hand 1-1/4” 1” $89.95
CM-10 Male-right hand 5/8” 5/8” $14.75 JMXL-16-T Male-left hand 1-1/4” 1” $89.95
CB-12 Male-left hand 3/4” 3/4” $17.50 KMX-16 Male-right hand 1-1/4” 1” $31.00
CB-12T Male-left hand Tef. 3/4” 3/4” $21.85 KMXL-16 Male-left hand 1-1/4” 1” $31.00
CM-12 Male-right hand 3/4” 3/4” $17.50 RSM-8 Male-left hand 5/8” 1/2” $19.08
CM-12-757 Male-right hand 3/4” .757” $18.20 RSB-8 Male-right hand 5/8” 1/2” $19.08
CM-12T Male-right hand Tef. 3/4” 3/4” $21.85 RSB-10 Male-left hand 3/4” 5/8” $31.50
CMR12T-101 Front Ladder Bar Rod End 3/4” 3/4” $22.40 RSM-10 Male-right hand 3/4” 5/8” $31.50
CF-3Y Female Stud 10/32 10/32 $5.60

Four-Link Rod End Kits Chromoly Solid Rod Eyes with Jam Nuts
Consists of four left hand and four right hand rod ends with jam nuts.

PART# DESCRIPTION
3501 Mild steel rod end kit $132.00
3502 Four mild steel and four 4130 Chromoly rod end kit $177.00
3503 4130 Chromoly three-piece rod end kit, 3/4” x 3/4” $412.00
3504 Teflon-lined street rod end kit $166.00
3506 3/4” x 5/8” Chromoly rod end kit (4 lft & 4 rt rod ends & jam nuts) $434.00
3507 4130 Chromoly two-piece rod end kit $222.00

PART# DESCRIPTION
3780 3/4” Thread x 3/4” Hole $15.95
3785 3/4” Thread x 5/8” Hole $12.50

40 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 40 11/21/14 9:38 PM

 ROD ENDS AND HARDWARE

Tubing-Mild Steel Square Tubing-Mild Steel Plate Steel

PART NO SIZE PER FT. Mild Steel Mild Steel 4130 Chromoly
1102 5/16” X .058” WALL $4.32 PART NO. SIZE PER FT. PART NO. SIZE PRICE SQ. FT. PART NO. SIZE PRICE SQ. FT.
1112 3/8” X .058” WALL $4.09
1078 1/2” X 1/2” x .065” ERW $ 2.66 1170 .032” $8.64 Sq. Ft. 1166 .050” $15.84 Sq. Ft.
1101 7/16 X .058” WALL $4.59
1037 1/2” X .083” WALL $2.69 1093 1-1/2” x 1-1/2” x .120” ERW $ 3.57 1172 .050” $10.08 Sq. Ft. 1163 .090” $18.72 Sq. Ft.
1067 1/2” X .120” WALL $5.45 1031 2” x 2” x .083” ERW $ 3.93 1167 .075” $8.64 Sq. Ft. 1164 .250” $47.52 Sq. Ft.
1063 5/8” X .120” WALL $3.75 1056 2” x 3” x .083” ERW $ 5.22 1168 .090” $8.64 Sq. Ft. 1165 .125” $28.80 Sq. Ft.
1065 5/8” X .065” WALL $2.41 1145 2” x 3” x .120” ERW $ 7.80 1160 .125” $8.64 Sq. Ft. 1173 .188” $56.16 Sq. Ft.
1069 3/4” X .058” WALL $7.08 1070 1” x 2” x .120” $5.15 1161 .188” $15.84 Sq. Ft.
1033 3/4” X .156” WALL $5.37
1034 3/4” X .120” WALL $3.01 1162 .250” $17.28 Sq. Ft.
1035 3/4” X .065” WALL $2.80 Weld-In Tube Adapters
1052 3/4” X .095” WALL $2.86
Made from 4130 chromoly, these weld in tube-adapters.
1055 7/8” X .065” WALL $2.71
Available in left and right hand thread. Weld-In Slot Clevises
1043 1” X .058” WALL $5.62
1073 1” X .065” WALL $2.82
Made from 4130 chromoly and can be used in a
1076 1” X .095” WALL $3.85 variety of suspension, steering and other linkages.
1080 1” X .120” WALL $4.01 PART NO TUBE O.D. TUBE WALL SLOT SIZE HOLE SIZE PRICE
1032 1” X .156” WALL $5.96
1150 1” X .281” WALL $17.24
PART NO. THREAD TUBE O.D. X TUBE WALL PRICE 3798 5/16” .058” 5/32” 3/16” $ 6.50
1155 1” SOLID SWAY BAR MATERAL $12.20 3821R 1-1/4” 1-3/4” X .120 $20.00 3799 7/16” .058” 5/32” 3/16” $ 6.76
1215 1-1/4” X .065” WALL $5.26 3821L 1-1/4” 1-3/4” X .120 $20.00 3800 5/8” .058” 1/8” 5/16” $ 8.33
1064 1-1/4” X .083” WALL $5.66 3822R 1-1/4” 2” X .250 $31.00 3803 1/2” .058” 1/8” 1/4” $ 8.33
1068 1-1/4” X .120” WALL $5.91 3822L 1-1/4” 2” X .250 $31.00 3805 3/4” .058” 3/16” 5/16” $ 9.17
1053 1-3/8” X .095” WALL $5.24 3823R 5/8” 1-1/2” X .065 $15.81
3810 7/8” .058” 3/16” 3/8” $ 9.89
1071 1-3/8” X .120” WALL $7.23 3823L 5/8” 1-1/2” X .065 $15.81
3824R 1/4” 1/2” X .058 $4.57
3815 1.0” .058” 3/16” 3/8” $10.49
1074 1-1/2” X .065” WALL $4.61
1127 1-1/2 X .120” WALL $5.62 3824L 1/4” 1/2” X .058 $4.57 3820 1-1/8” .058” 1/4” 3/8” $11.23
1132 1-1/2” X .095” WALL $5.43 3825R 5/16” 5/8” X .058 $6.00 3620-7 1” .058” 1/4” 3/8” $10.79
1181 1-1/2” X .250” WALL $11.96 3825L 5/16” 5/8” X .058 $6.00
1117 1-5/8” X .134” WALL $4.60 3826R 3/8” 5/8” X .058” $5.04
1153 1-5/8” X .120” WALL $8.24 3826L 3/8” 5/8” X .058” $5.04 Detent Pins
1191 1-5/8” X .156” WALL $15.60 3830R 3/8” 3/4” X .058 $6.25
These pins serve the same function as our
1030 1-3/4” X .134” WALL $4.13 3830L 3/8” 3/4” X .058 $6.25
quick pins but at a lower price. They are
1154 1-3/4” X .120” WALL $6.43 3835R 3/8” 7/8” X .058 $6.25
ideal for easy removal and installation of
1125 1-3/4” X .095” WALL $7.10 3835L 3/8” 7/8” X .058 $6.25
components where a locking quick release pin
1192 1-3/4” X .156” WALL $18.71 3840R 7/16” 7/8” X .058 $6.75
is not required.
1124 2” X .095” WALL $5.46 3840L 7/16” 7/8” X .058 $6.75
1182 2” X .120” WALL $7.70 3845R 1/2” 7/8” X .058 $6.75 PART # DIAMETER GRIP PRICE
1180 2” X .250” WALL $13.57 3845L 1/2” 7/8” X .058 $6.75
2070 1/4” 1.0” $1.75
1061 2-1/4” X .120” WALL $6.50 3850R 1/2” 1” X .058 $7.10
3850L 1/2” 1” X .058 $7.10
2075 1/4” 1-1/4” $1.75
1183 2-1/4” X .250” WALL $13.10
1088 2-3/8” X .313” WALL $21.50 3851R 1/2” 1” X .065 $7.10 2085 5/16” 1-1/8” $1.75
1090 2-1/2” X .120” WALL $3.48 3851L 1/2” 1” X .065 $7.10 2095 5/16” 2.0” $1.75
1184 2-1/2” X .250” WALL $13.40 3852 5/8” 1-1/4” X .065 $10.66 2110 3/8” 2.0” $2.10
1091 2-1/2” X .313” WALL $20.60 3852L 5/8” 1-1/4” X .065 $12.80
1075 3” X .250” WALL $26.37 3855R 5/8” 1” X .058 $7.10
3855L 5/8” 1” X .058 $7.10 Quick Release Pins
3856 5/8” 1” X .095 $6.33
Tubing-4130 Chromoly 3857R 1/2” 1-1/8” X .058 $10.70
Ideal in a variety of applications where
the ability to quickly remove or disconnect
PART NO SIZE PER FT. 3857L 1/2” 1-1/8” X .058 $10.70 components on a regular basis is desired;
3859R 1/2” 1-1/8” X .083 $7.70 these positive lock, quick release pins can
1142 1/4” X .049” WALL $7.25 3859L 1/2” 1-1/8” X .083 $7.70 save valuable time while making your job
1146 5/16” X .049” WALL $5.27 3860R 5/8” 1-1/8” X .083 $7.70 easier. They feature a positive locking ball that
1147 7/16” X .049” WALL $6.23 3860L 5/8” 1-1/8” X .083 $7.70 requires the push of a button to release the
1143 3/8” X .049” WALL $4.50 3865R 3/4” 1-1/8” X .083 $7.70 pin so they can’t fall or be pulled out.
1039 1/2” X .058” WALL $4.68 3865L 3/4” 1-1/8” X .083 $7.70
1059 5/8” X .058” WALL $3.79 PART # DIAMETER GRIP PRICE
3866R 3/4” 1-1/4” X .095 $10.66
1040 3/4” X .058” WALL $3.79 3866L 3/4” 1-1/4” X .095 $15.79
2005 3/16” 3/8” $13.75
1195 3/4” X .083” WALL $6.53 3867R 3/4” 1-3/8” X .095 $11.31 2011 1/4” 1 1/4” $16.50
1049 7/8” X .058” WALL $4.09 3867L 3/4” 1-3/8” X .095 $16.90 2029 5/16” 1” $17.50
1149 7/8” X .065” WALL $5.82 3868R 1/2” 1-1/4” X .095 $10.66 2035 3/8” 1-0” $13.75
1041 1” X .058” WALL $3.95 3868L 1/2” 1-1/4” X .095 $12.80 2045 3/8” 2.0” $17.26
1092 1” X .065” WALL $3.96 3869R 3/4” 1-1/2” X .120 $15.81 2055 1/2” 2.0” $24.50
1193 1” X .083” WALL $7.53 3869L 3/4” 1-1/2” X .120 $15.81
1156 1” X .250” WALL $14.07
1042 1-1/8” X .083” WALL $5.40
1044 1-1/8” X .058” WALL $4.48 T-Bolt Clamps
1114 1-1/4” X .058” WALL $4.90 These clamps are made from the highest
1213 1-1/4” X .065” WALL $5.79 stainless steel and use a stainless T-Bolt with
1106 1-1/4” X .095” WALL $6.05
a nylock lock nut for positive clamping that
1190 1-1/4” X .083” WALL $6.21
1157 1-1/4” X .250” WALL $15.04
can’t back off or get loose.
1119 1-3/8” X .058” WALL $5.67 Part#
1107 1-3/8” X .095” WALL $7.24 2152 1.25” to 1.37” Clamp 6.40 each
1121 1-1/2” X .058” WALL $5.14 2155 1.44” to 1.58” Clamp 6.40 each
1211 1-1/2” X .065” WALL $6.11 2157 1.56” to 1.70” Clamp 6.40 each
1194 1-1/2” X .083” WALL $8.10 2173 2.56” to 2.87” Clamp 6.40 each
1141 1-1/2” X .120” WALL $8.62
1060 1-5/8” X .083” WALL $7.04
1140 1-3/4 X .083” WALL $7.70
1079 3-1/2” X .250” WALL $74.88

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 41

2015 CE CATALOG.indd 41 11/21/14 9:38 PM

 BRACKET AND TABS

Four-Link Brackets available with 3”, 3 1/4”, 3 1/2” axle hole Ladder Bar Brackets available with 3”, 3 1/4”, 3
1/2” axle hole
“TOP GUN” Four-Link Heavy Duty Four-Link Housing
Housing Bracket Bracket-W/O Shock Mount 360 Ladder Bar Bracket with Shock Mount
0.4420" 5.1265"

1/4” Mild Steel 3.0300"

1/4” Mild Steel 3.7310"

1/4” Mild Steel

1/2” Holes 3/4” Holes 3.0300"

1-1/8” Hole Spacing 5/8” Holes

3/4” Hole Spacing 5.6605"
3.0300"

3315-1 $42.00 ea 3514-2 $27.75 ea 8” Center to Center (A)

5.3266"

7.6545"
6.5433"
3607-9 $27.25 ea
3.3514"

1/4” Chromoly 0.6495" 1.1250" 8.0000" (A)

0.8650" 1.4000"

1/2” Holes 1.0050" 0.7500"

6.7097"
3/4” Hole Spacing 0.5050"
1.3800"
0.5050" 0.7550"
3315-1M $65.00 ea C/E 3514-2
C/E 3315-1
0.7500"
1.4000"

“TOP GUN” Four-Link Housing Heavy Duty Four-Link 0.6300"

Bracket-With Shock Mounts Housing Bracket-with 0.3750"

Shock Mount 3.0300" 3.7310"

C/E 3607-9
1/4” Mild Steel 3.2348"
4.6216" 1/4” Mild Steel
5/8” Holes
3.2330" 3/4” Holes Ladder Bar Bracket
.875” Hole Spacing
1-1/8” Hole Spacing
3515-1 $35.00 ea 3514-1 $35.00 ea 6.3741" 6.5433"
1/4” Mild Steel
3.0300"
1/4” Chromoly 0.3750"
0.7500"
1.1250"
5’8” Holes
6.3741"
1.4000"
5/8” Holes
0.7500" 7.4045"
0.3800"
8” Center to Center (A) 8.0000" (A)
.875” Hole Spacing 1.4000"
0.6250"
3607-2 $17.25 ea
3515-1M $57.25 ea
0.7550"
0.8750"
C/E 3514-1

C/E 3515-1
Heavy Duty Four-Link 1.4000"

“TOP GUN” Four-Link Chassis Bracket 0.6300"

Housing Bracket w/o 1/4” Mild Steel

Shock Mounts 3.0300" 4.6216" 3/4” Holes
C/E 3607-2

1/4” Mild Steel 1-1/8” Hole Spacing Ladder Bar Housing Bracket with
3500-9 $27.75 ea
5/8” Holes Shock Mount (old style)
16.1793"

.875” Hole Spacing

1/4” Mild Steel
3515-2 $27.25 ea
5/8” Hole with shock mount
7.4045"
7-1/8” Center to Center (A)
1/4” Chromoly 1.1211"

3608-9 $27.25 ea
5/8” Holes 1.4000"
0.8750"
3.1976"

.875” Hole Spacing 0.7550"

3515-2M $41.75 ea 0.6250" C/E 3500-9 (A)

3.0300" 7.1250"
C/E 3515-2
Heavy Duty Four-Link
0.7500"
4.8266"

Tall “TOP GUN” Four-Link Chassis Bracket 0.3800"

Chassis Bracket
1/4” Mild Steel
5/8” holes for use with 3.4” x 5/8” 1/2” Holes
0.6450"

Chromoly rod ends that provide smaller 3/4” Hole Spacing

incremental adjustment. 3315-3 $38.00 ea C/E 3608-9
15.8522" Ladder Bar Housing Bracket W/O Shock
16.2793"
Mount (old style)
1/4” Mild Steel 1/4” Chromoly
1/2” Holes 1/4” Mild Steel
5/8” Holes
3/4” Hole Spacing 5/8” Holes
.875” Hole Spacing
3515-3 $30.75 ea 0.8721" 3315-3M $ 49.95 ea 7-1/8” Center to Center (A)
3.0300"
0.6300"
0.7500" 3600-1 $17.25 ea
(A)
1/4” Chromoly 0.5050"
7.1250"

5/8” Holes C/E 3515-3 C/E 3315-3

.875” Hole Spacing
3515-3M $43.00 ea
0.6450"

C/E 3600-1

42 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 42 11/21/14 9:38 PM

 BRACKETS AND TABS

Ladder Bar Brackets continued

C/E 3638-3

Ladder Bar Front Profiled Ladder Bar Ladder Bar Front

C/E 3718-1

Bracket Front Bracket R5.2873" Bracket

1.7550" 3.1250"

3.0500"
For use with Chassis Engineering 1.1254"
Precision profiled to fit the For use with 1 3/4” dia round
mandrel bent 2” x 3” contour of Chassis Engineering crossmember. 0.7550"

crossmember. 0.7550"
mandrel bent frame rails. 1.1255"
1/4” Mild Steel 3.8750"
3.0489"
1/4” Mild Steel 3/4” Holes
1/4” Mild Steel 1.1250"
3/4” Holes 3718-1 $14.75 ea
3/4” Holes 0.7550"
3638-3 $14.75 ea
3638-1 $14.75 ea C/E 3638-1
For use with 1 3/4” dia
(A) Adjustable Shock Mount Housing Lower Shock Mount
C/E 3714-5
Chromoly round crossmember.
Bracket FOR FORD 9” BACK BRACE 3718-1M $21.48 ea
Replacement for the Chassis Replacement bracket for the
Fits 3" Tube 1.1000"
Engineering weld-on Ford 9” housing with 2” X 3” 2.0211" 1.6190"
For use with 1 5/8” dia
adjustable shock mount back brace 0.3750" Chromoly round crossmember.
0.3750"
1/4” Mild Steel 1/4” Mild Steel 3718-3M $21.48 ea
3/8” Holes 4.9375"
3/8” Holes 3.7518"

0.7500"
3”Axle Tubes 0.7500"
3/4” Hole Spacing
3/4” Hole Spacing 3714-5 $15.00 ea
3714-4 $15.00 ea
C/E 3893 C/E 3889
Small Universal Tabs C/E 3714-4

1.8” Mild Steel R0.4500" 1/8” Mild Steel R0.5000" Window Mount Tab C/E 3911-2
3/8” Hole 3/8” Hole 0.3800" .070” Mild Steel
Fits 1 1/4” tube 3889 $2.00 ea 3/16” Hole R0.2701"
3893 $1.25 ea 0.5600" 1.0173" 0.1901"
.900” Tall
C/E 3922 3911-2 $.55 ea 0.6299"
1/8” Mild Steel R0.3930"
C/E 4111-1
1.2891"
0.9000"
1/8” Mild Steel
5/16” Hole
1/8” Mild Steel R0.5000" 3/16” Hole
Fits 1 5/8” tube 3911-1 $.60 ea
0.6229" 1/4” Hole
3922 $1.25 ea C/E 3911-3
0.9411" C/E 3920 4111-1 $1.50 ea
Flat Mount Tab
1.0173" 0.8632"
.070” Mild Steel
1/8” Mild Steel R0.2500" R0.1000"
3/16” Holes
3/16” Hole 1.2894" 3911-3 $1.85 ea
Fits 1-1/4” tube 0.6229" C/E 3620-3 1.5000"
3920 $1.25 ea C/E 3901
0.9546"C/E 3921 Crossmember Brace Tab
3/16” Mild Steel R0.4070" Bellcrank Tab 0.3800"
1/8” Mild Steel R0.3125" 5/16” Hole 0.3170" 1/8” Mild Steel
1/4” Hole 3620-3 $1.50 ea 3/8” Hole 0.9375"
0.6670"
Fits 1-1/4” tube 3901 $2.25 ea
3921 $1.25 ea 0.6229" 1/8” Mild Steel 0.4804"
1.4014" 1.0000"
0.9572" 5/16” Hole
3620-4 $1.50 ea
C/E 3923
C/E 3913
Medium Size Universal Tabs
C/E 3895
1/2” Hole 1-1/2” x 1-1/4” Wide 3/16” Mild Steel R0.6250"
R0.6250"
3/16” Mild Steel 5/8” Radius R0.5000" 3/8” Hole
3/8” Hole 3923 $1.50 ea
3913 $1.50 ea
1/8” Mild Steel
1/8” Chromoly 0.9000" 0.9000"
Fits 1-1/4” tube 0.9735"
2913 $2.67 ea 1.4421" 3895 $1.25 ea 1.4421"
C/E 3749-1 .090” Chromoly
2895 $3.65 ea C/E 3892 Gusseted Chassis Tab C/E 3890
Heavy Duty R0.7500"
Diagonal Link Tab Parachute Tab R0.6300" 1/8” Mild Steel R0.5000"
0.7550" 3/8” Hole 0.3800"
0.3800" 3/8” Hole
1/8” Mild Steel Fits 1-1/2” Tube
1/8” Mild Steel
3892 $1.25 ea 3890 $2.30 ea 1.0625"
3/4” Hole 1.2225" 1.1578" 1.5650"
3749-1 $2.00 ea
1.9356" 1/8” Chromoly 1.7382"
2892 $3.05 ea 0.7994"
Fits 1-1/2 Tube

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 43

2015 CE CATALOG.indd 43 11/21/14 9:38 PM

 BRACKET AND TABS
C/E 3907
Misc. Brackets PanHard Rear End
Large Universal Tabs
Bracket
.090” Chromoly Pinto Rack & Pinion Mount 8” Tall
2-3/8” Tall 1/8” Mild Steel 3/16” Mild Steel
2.3900"
No Hole 1-5/8” Tube 3/4” Hole
Fits 1-5/8” tube 7/16”Holes 3747-1 $21.50 ea
3907 $4.35 ea 3903R $6.25 ea
3903L $6.25 ea R
C/E 3908
Fits 1-5/8" Tube Bolt-on Diagonal Link Brackets
1/2” Hole 5/8” & 3/4”
R0.6250"
3/16” Mild Steel Wheelie Bar Bracket 3/16” MIld Steel
Fits 1-5/8” tube
1/4” Mild Steel 0.3800" 0.7490"
2.9513"
1/2” Holes
3908 $1.50 ea 1.2150"
3/8” Hole 5/8” Mount Hole
1/8” Chromoly Fits 3” Tube Fits 3" Tube 3748-1 $8.75 ea
2908 $3.00 ea 9” Center to center on 3/4” Mount Hole
C/E 3900 3748-2 $8.75 ea
mounting holes
3/16” Mild Steel R0.7500" 3620-1 $17.25 ea 6.2171"

1/2” Hole Bolt-on Shock Mount Bracket

No notch Left & Right
3900 $3.10 ea Replacement bolt-on bracket for
2.5000"
Chassis Engineering 3714 Adjustable
1/8” Chromoloy Transmission Crossmember MountC/E 3620-1
shock mounts.
3/4” Hole 1/8” MIld Steel Right
No notch 1-5/8” Radius 3714-2 $10.50 ea
2900 $4.95 ea 2.0925"
7/16” Slot Left
C/E 3902 5100-1A $5.25 ea 3714-3 $10.50 ea L R
3/16” Mild Steel R0.7650"
1/2” Hole Aluminum Door Latch or Parachute Handle Flat Cable Mount
No notch
3/16” Aluminum 1/8” Mild Steel
Fits 1-5/8” Tube 5.4784"

3902 $2.35ea 1.8185" 10” Tall 3/16” Holes

4.3750" C/E 7600-1
3/16” Holes 7600-1 $2.35 ea
1/8” Chromoloy 3910 $6.75 ea 0.1875" 4.0000"
3/4” Hole
2902 $4.88 ea Carbon Fiber Handle C/E 3910
0.3750"
1.0000" 1.3750"
C/E 3897

3/16” Mild Steel R0.7500" 0.2050"

3/4” Hole C/E 3914
CF 1080 $25.00
No notch CF1083C 445.00 Line-Loc Mount
3897 $3.10 ea 2.5000"
2.0000"
.090” Mild Steel
Dual Master Cylinder Mount
3/16” Holes
C/E 3904-1
This Bracket is used to mount Mopar 3914 $3.25 ea
Master Cylinder to
4.1000" 0.1900"
2.0925" 1.5000"
C/E 3705-1 2” x 3” Frame Rails. 0.3300"

Mounting Strips
V-Notch Tab R0.6250" Ideal for fastening items to any race car simply and quickly.
3/16” Mild Steel
0.3800" 3904-1 $10.95 ea 3.2000" Made from .050” steel mounting stripand 70” long, they are
1/8” Mild Steel C/E 3904-2 easily welded, screwed or riveted to any surface. 3/16” holes.
1.3957" C/E 3906
3/8” Hole 3.1039" Master Cylinder 3.9959" 3906 $17.75
3705-1 $4.23 ea Brace 3.8750"
1/2” Hole R0.3125"
3705-2 $3.77 ea 1.4835" 1/8” Mild Steel
0.2000"
4” x 4” 3.7452"
3904-2 7.25 ea 0.3750" 0.7500"
C/E 3717-1

Rear Shock Mount R0.7500"

Bus Bar Mount
0.5050" .090” Mild Steel
3/16” Mild Steel Mopar Master Cylinder Mounting Tab
1/2” Hole 3/16” Holes
2.1013" 4.8481"
Fits 3” Tube 1.5000"
1029-2 3.89 ea C/E 1029-2
1/8” Chromoly 0.3300"
3717-1 $5.00 ea Fits 1-5/8” Tube
5.1902"
0.1900"

Fits 3" Tube 4803-7 $10.95 ea 0.8773"

3.2000"

44 chassisengineering.com • Toll Free Ordering: 800-327-9402

C/E 3904-5 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 44 11/21/14 9:38 PM

 BRACKETS AND TABS
C/E 4031-1
Misc. Brackets continued
C/E 8015-2 0.5300"
Strut Rod Mounting Plate Window Net
Strut Rod
0.1900" .050” Chromoly Mounting Tab
Mounting Tab 8015-1 $2.95 ea
0.1250" 1/8” Mild Steel
0.6350" 2.7500"
0.7500" 1/2” Hole
1/8” Mild Steel
Fits 1-3/4” Tube
3/16” Hole 0.7500"
4031-1 $2.90 ea
8015-2 $1.50 ea 0.1650"
C/E 8210-1 1.3700"
Tie Down Rings C/E 5520
Fits 1-3/4" Tube
Our heavy duty weld- 1.2500"
0.1950"
on tie down rings are NOS Ball Valve
designed to weld onto Engine Limiter Block C/E 8015-1 Mount 1.1250"
2.1788"
any chassis to provide a Plate for Chevy 1/8” Mild Steel 3.8117"
secure place to attach 5520 $2.00 ea
a ratcheting tie down 1/8” Mild Steel
3.8258"
or tow strap to any 3/8” Holes
race car. 5052-2 $6.95 ea
1.9666"
8210 $10.95 pr

Bolt-On Dzus Brackets Weld-On Dzus Brackets Weld-On Dzus Brackets

3999L $3.88 ea R L #3990 #3991

3999R $3.88 ea 3990 $1.05 ea
3998L $1.65 ea
3998R $1.65 ea 3991 $1.05 ea

Take the confusion out of 4-link set-up... Jerry Bickel’s Chassis Book
The ultimate information
The days when source for chassis tuning. This
racers drew 4-Links informative book by noted
combinations on the chassis expert Jerry Bickel
garage floor with contains everything you could
chalk, strung lines, or possibly want to know about
scribed their brackets the proper setting up and tuning
on the bench-top are of chassis and suspension for
over! This program drag racers. Whether you’re a
harnesses the power beginner or have been racing
and convenience of for the last twenty years, this
laptop computing to book is a must!
locate all possible Instant Centers for any 4-Link
PART# DESCRIPTION
equipped car. Regardless of the manufacturer.
7501 Jerry Bickel’s Chassis Book $79.00
This incredibly valuable tool helps racers simply
and efficiently adjust drag car chassis for
optimal performance, handling and consistency. Chassis Logo Apparel
View a listing of all possible intersects and bar T-Shirts
combinations. Zoom in on ICs close to your Call for sizes, black only with color logo.
current settings, and see what other 4-Link bar $15.00
Front
combinations get you in the same neighborhood. Hats
Make small changes to you IC, and ‘sneak up’ on F/W2001 Small/Medium $19.95
your ideal setup. F/W2001 – Large/XL $19.95
PART# DESCRIPTION Visors Back
7505 4-link Wizard $129.00 F/W 2003 $13.50

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 45

2015 CE CATALOG.indd 45 11/21/14 9:38 PM

 ORDERING / CONTACTS

Information & Tech Shipping

Call: (561) 863-2188 UPS: This is our most common method of shipment unless specified otherwise.
Hours: 9:00 a.m. to 5:00 p.m. Eastern It is available in all 50 states and Puerto Rico. You can use the chart below to
Monday thru Friday. Closed Saturday and Sunday. determine your approximate shipping time by surface UPS. Blue Label UPS (Air)
generally requires two days and is available to the shaded areas in the bottom
Fax: (561) 863-1424 chart at an additional charge.
Available 24 hours / 365 Days.
Air Freight: Available anywhere in the world. We must have the name of
Web Sales the nearest airport and your phone number for notification upon arrival. Air
Order online at chassisengineering.com, available 24 hours a day 7 days a
shipments must be prepaid. We use: Federal Express, BAX Globe and UPS.
week

Counter Sales Truck: Available in the continental U.S. and Canada. Roll bars, rear ends and
9:00 a.m. to 5:00 p.m. Monday thru Friday. factory-welded subframes must be shipped by truck. Truck shipments must be
prepaid in full.
Orders
We accept orders during normal business hours by phone, fax or mail. Our Freight Charges: All shipping charges for UPS shipments are paid by you
fax line is open 24 hours to receive your order for next day shipment. We and will be added to the total amount of your order. Freight charges on truck
have multiple dealers and distributors throughout the country and we can shipments are paid by you to the trucking company at the time of delivery.
direct you to a dealer nearest you.

Foreign Orders
We ship anywhere, however you must make your own shipping
arrangements, or provide us with your preferred method of shipment. All
5-8 Days
shipments must be pre-paid in U.S. funds and freight charges are paid by 4 Days
you.

Special Orders
If you have a special request or need for an item not listed in our catalog,
3 Days
check with your salesman or technical advisor to see if it is available. We
are constantly adding new items to our inventory and it is possible that 2 Days
we have what you’re looking for but that it’s not mentioned in our catalog.
Payment in full must accompany all special orders. No exceptions. No 1 Day
returns.

Payment Terms
We accept Visa, Mastercard, Discover and Amex credit cards for all mail
*
orders. We do not have open accounts and do not ship C.O.D. orders.
Custom orders must be prepaid.

When you receive your order

Check your order carefully as soon as you receive it to insure that you have
received what you ordered. Do not use or modify parts in any way before 2-Day Service Available in Shaded Area.
checking them. A part that is modified in any way cannot be accepted for
return regardless of fault. If any parts are back ordered this will show on
your invoice. If we are not notified otherwise, we will ship your order when
available. Failure to accept a back order will result in your account being
charged for the freight. On back orders greater than 60 days we will notify
you at the time of availability and give you the option of accepting the parts.

Have a problem?
Please have your Customer Number and Invoice Number available.
If you receive a defective or wrong part, contact Chassis Engineering
immediately BEFORE returning the part. You will be issued a RMA number
which must be displayed on the outside of the package. This number tells *
the people in our receiving department just what the problem is and will
help process your return without delays. The shipping charges on all returns
MUST be pre-paid, we do not accept COD’s. After inspecting the parts,
a determination will be made and you will be reimbursed for the freight
charges if the fault was with Chassis Engineering.

FAILURE TO OBTAIN AN RMA NUMBER WILL RESULT IN YOUR PARTS

BEING RETURNED TO YOU UNOPENED.

46 chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188

2015 CE CATALOG.indd 46 11/21/14 9:38 PM

 RETURN POLICY

RETURN GUARANTEE

Chassis Engineering has the most liberal return policy of any manufacturer in the industry.
However, we do have certain guidelines that MUST be followed.
WHAT CAN BE RETURNED: Chassis Engineering will accept anything purchased from us except special orders for return or
exchange for any reason within a period of 30 days from the invoice date. You will receive a full credit, for the parts only. We do not credit
shipping charges. After 30 days, we will accept only DEFECTIVE parts for repair or exchange at our option, with the exception of coil
springs which can be exchanged at any time as long as they are returned in sellable condition with no rust or scratches. Items returned
are subject to a 15% reboxing and restocking charge.

WHAT CANNOT BE RETURNED: Chassis Engineering will not accept for return any special order, custom built parts, or any
item built to customer specifications. Items that have been used, modified, altered or allowed to deteriorate to a condition where they
cannot be resold as new, will not be accepted.

EXCHANGES: When returning items to be exchanged, we must have the returned item in our possession before we can send out the
exchange parts without charging you for the item. If you absolutely must have an item before returning another part, we will be glad to
ship the new item to you on a Visa, Mastercard or Discover card and issue you a credit when your return arrives in good condition.

HOW DO I RETURN PARTS?

You must use the following procedures when returning parts:

1. Call us at (561) 863-2188 and get an R.M.A. (Return Materials Authorization) number. This number directs our receiving department
and customer service people to the paper work concerning your return. Please have your invoice handy when talking to our customer
service department.
2. After getting your R.M.A. number, please put this number boldly on the outside of your package or packages where it can easily be
seen.
3. Send your return to the address on your invoice by whatever shipping method is most convenient for you. You must prepay the
shipping charges to us. We will not accept C.O.D. shipments!
4. Upon receipt of your return, the parts will be inspected and exchanged for the correct part or a credit will be issued. If there is a
problem, you will be contacted by a customer service representative.

DISCLAIMER OF WARRANTY

THE PURCHASER IS RESPONSIBLE FOR DETERMINING THE SUITABILITY OF ANY AND ALL
PRODUCTS PURCHASED FROM CHASSIS ENGINEERING
Purchaser understands and recognizes that racing parts, equipment and services provided by, manufactured and/or sold by Chassis
Engineering, Inc., are subject to varied conditions due to the manner in which they are to be installed and used. Purchaser further
recognizes and agrees that suitability of any part sold or manufactured by Chassis Engineering, Inc. for a particular application is the
purchaser’s decision and that the purchaser is not relying on the skill or judgement of Chassis Engineering, Inc. regarding suitability of any
product or service. Chassis Engineering, Inc. makes no warranties whatsoever, expressed or implied, oral or written to purchasers. There
is no warranty of merchantability made to purchasers with regard to racing and racing equipment with the exception of those specific
products covered under our Limited Lifetime Warranty as outlined below.

LIMITED LIFETIME WARRANTY: This Warranty is limited to the specified products manufactured by Chassis Engineering,
Inc. and the original owner only. Proof of purchase will be required. Claims must be shipped to Chassis Engineering prepaid. A copy of the
original invoice and $20.00 (to cover cost of handling and return freight must be included).

Liability is limited to repair or replacement of defective parts to original purchaser. Chassis Engineering, Inc. is not liable for any
consequential damages, expenses or injury arising from the use, misuse, or improper installation of any product manufactured or sold by
Chassis Engineering, Inc. Chassis Engineering reserves the right to make changes in design or add to or improve their product without
incurring any obligation to install the same on any products previously manufactured. This warranty shall not apply to any product that
may be covered under the warranty of another manufacturer or which has been repaired or altered in any way so as in
our judgement to affect its performance; nor which has been subject to misuse, abuse, negligence or any other occurrence beyond the
control of Chassis Engineering, Inc.

chassisengineering.com • Toll Free Ordering: 800-327-9402 • Info & Tech: 561-863-2188 47

2015 CE CATALOG.indd 47 11/21/14 9:38 PM

 Toll Free Ordering: 800-327-9402
Info & Tech: 561-863-2188
Fax: 561-863-1424
Website: chassisengineering.com
Se habla espanol

CHASSIS ENGINEERING
1500 AVENUE R PRESORTED
RIVIERA BEACH, FL 33404 STANDARD
US POSTAGE PAID
BLAINE WA
PERMIT NO 8

2015 CE CATALOG.indd 48 11/21/14 9:38 PM