MANUAL DESCRIPTION
CONTENTS
The first page of this manual contains a table of contents which lists the name of vehicle models and groups
within each model.
TEXT
The vehicles to which the information in the text pertains are generally designated according to their body
classification. In some cases, other limiting designations such as model name, type of drive system, etc., are
given. If there are no such limiting designations, the information can be assumed to cover all models.
PAGE NUMBERS
All pages are numbered consecutively within each model. The page number can be found on the upper left or
right of each page.
SECTION TITLES
The group titles and section titles can be found at the upper center of each page.
Page number Group title
Group number Section title
1-8 BODY CONSTRUCTION
BODY CONSTRUCTION CHARACTERISTICS
BODY CONSTRUCTION CHARACTERISTICS
FRONT BODY
M4010010001608
HEADLIGHT SUPPORT • The bolt-on headlight support panel upper is
• The crush box structure, which has an octagonal used to improve maintainability.
cross-section at the front end of the front side-
member, has been adopted. This structure can
effectively absorb energy upon frontal impact and
reduces the vehicle repair cost caused by a light
collision.
9.0 ± 2.0 N·m
80 ± 17 in-lb
3
2
3
5 4
A 7
5
9.0 ± 2.0 N·m 1
80 ± 17 in-lb 6
8
9 10
20 ± 5 N·m 9 8 7
15 ± 3 ft-lb
AB900381AB
1. Front bumper reinforcement
A Crush box
2. Headlight support panel upper
3. Front end crossmember gusset
4. Front end crossmember upper
5. Radiator bracket lower A
6. Front end crossmember bulkhead
7. Radiator bracket lower B
8. Shipping hook front
9. Shipping reinforcement front
10. Front end crossmember lower
AB900384AB
The crush box structure has been changed to
straight type with an octagon cross-section so that
the structure can effectively absorb energy from the
impact at the time of collision.
TSB Revision