NEW!

In 2011
ECU diagnosis
fo� T�ucks

Innovativ� and ��liabl�:

Professional electronic control
unit diagnosis from Bosch

1
 ECU diagnosis
from Bosch

Ñ ESI[tronic] – Workshop software for comprehensive know-how

Ñ KTS 670 – Multimedia-compatible mobile testing system
Ñ KTS 570 – Convenient wireless solution with best-in-class measuring technology for all
ECU diagnosis requirements
Ñ KTS 540 – Wireless add-on for FSA, BEA, standard PCs or laptops
Ñ KTS 530 – Entry level access to comprehensive ECU diagnosis
Ñ KTS 515 – Entry level access to onboard diagnostics (OBD)
Ñ KTS 800 Truck – Complete mobile solution for truck, bus, and trailer diagnostics
Ñ KTS Truck – Radio module for comprehensive truck, bus, and trailer diagnostics
Ñ KTS 340 – Mobile all-round solution for complete vehicle diagnostics
Ñ KTS 200 – Entry level access to mobile ECU diagnosis

ECU reprogramming according to Euro 5 standard

In the future these technical model approval requirements will apply all over
the EU. Accordingly the Euro 5 standard requires automobile manufacturers
to make technical repair information available through their online portals and to permit
reprogrammining of ECUs. Only testers that are already Euro 5-compatible can be used.
This only includes devices in which a „Passthru Interface“* is already integrated. Bosch
offers several models for this purpose. If required, the testers can install the
latest software version from the online portal of the manufacturer in the control unit
of the vehicle. The vehicle manufacturer charges fees for downloading information
and reprogramming.

* The Pass-Thru standard defines a communications driver that is used to reprogram control units.

2
P�of�ssional t�st �quipm�nt
for modern vehicle electronics

The KTS series from Bosch: 20 years of success in workshop-compatible test equipment for ECU diagnosis

The digital revolution in the automotive industry New possibilities for turnover with
modern diesel technology
has not bypassed the workshop. Increasingly
A good example is the triumphant progress of the diesel
more complicated vehicle components and their engine: High pressure systems, such as common rail or
networking to systems are turning vehicles into unit injectors from Bosch make vehicle diagnosis essen-
“mobile computers”. This results in professional tial. The KTS series, in combination with the specially
designed ESI[tronic] software, provide you with optimal
repairs and maintenance requiring qualified
opportunities to check these systems in the vehicle.
diagnosis.
As an extension of the testing opportunities, professional
Continued success in service:
test parameters, such as basic settings, volume compa-
With powerful ECU diagnosis from Bosch
rison, compression test, idling speed comparison and
The increasing amount of electronics in vehicles makes
adaptation functions are available. These enable trouble-
ECU diagnosis standard practice in the workshop. This
shooting and repairs to carried out in shorter time and
also applies to simple maintenance work on modern
profitably. Not only with Bosch systems, but also for
cars, or resetting the service interval display. With its
systems of other manufacturers! The renewal of high
22 years of experience, the KTS series from Bosch is
quality components thereby provides
the test equipment with the highest, and continuously
additional means of
growing, market coverage. Regular updates of the dia-
gaining profit.
gnosis data in the integrated ESI[tronic] software from
Bosch ensure that the workshop always has up-to-date
information at its disposal. It currently covers around
80 different types of electronic system from more than
150 vehicle manufacturers. Reliability per subscription:
Bosch provides the workshop with around 350 new ECU
diagnosis programs per quarter.

The KTS series guarantees transparency in

ECU diagnosis. Awards regularly underscore
the high acceptance in the global market.

3
 ESI[t�onic]-Softwa��: The basis of info�mation
for diagnosis, technology, repair and service

The complete ESI[tronic] software, new with data from ZF Services ESI[tronic] software with guided troubleshooting
for rapid and simple diagnosis

ESI[tronic] – perfectly geared for SD (ECU diagnosis software)

diagnosis, technology, maintenance and service Links Bosch test equipment or the workshop
It is only with professional diagnostics and information PC with information from the control unit
systems that a workshop will be able in future to offer all
services for innovative vehicles. ESI[tronic] is perfectly SIS (Service Information System)
tuned to the Bosch test equipment, which permits intro- SIS troubleshooting instructions
duction to ECU diagnosis if a workshop PC is available. can be used on any standard PC
The large number of software modules can be adapted
to the specific workshop requirements. They are activated ESI[tronic]-M: Mechanical work procedures
individually depending on requirements. Updates for the and functions throughout the vehicle
subscription data mean that the information is always at Technical data for gasoline and diesel vehicles,
the latest stage of development. e.g. wheel settings, maintenance schedules,
data and information on changing toothed belts.
ESI[tronic]-A: Access to the full range
of Bosch automotive equipment ESI[tronic]-P: Wiring diagrams for all im-
Additional benefit through comparison of Bosch codes portant areas of comfort and convenience
with order numbers of vehicle manufacturers. electronics
Most comprehensive selection of vehicle
New supplementary service for ESI[tronic] customers convenience wiring diagrams, covering all manufacturers,
Parts catalog and installation instructions from ZF Services under a single user interface.
integrated in Bosch workshop software ESI[tronic].
ESI[tronic] TSB:
ESI[tronic]-C: Modular system for ECU diagnosis Technical Service Information
and SIS troubleshooting instructions As an ideal supplement to SIS instructions,
Professional software for ECU diagnosis via CAS[plus] TSB opens up rapid access to well-known
linked with troubleshooting instructions (SIS) for repair- vehicle faults and offers assignment according to sym-
ing engine management systems (gasoline and diesel), ptom and system group (ABS, airbag, engine, etc.). This
car brake, safety and convenience systems. is combined with a clear description of causes, supple-
mented by tested repair tips with visual support.

4
Simpl�, tim�saving and �ffici�nt
vehicle diagnosis with CAS[plus]

CAS[plus] creates connection for practical diagnosis Bosch download server: Software updates for KTS 340 and KTS 200

CAS[plus] simply speeds up diagnosis KTS 340 and KTS 200 updates – now online
The actual values from the ECU diagnosis are auto- In addition to the KTS 200, the software updates can also
matically compared with the target values in the SIS fault be downloaded and installed manually or automatically
finding instructions, color-coded and logged in line with from the Bosch download server for the KTS 340.
customer needs. Without changing over, all additional
information for fault rectification and the measured URI KTS 670, KTS 570/540 wireless, KTS 530,
values of the multimeter function are immediately KTS 340 and KTS 200: Diagnostic professionals –
available. powered by ESI[tronic]
Bosch‘s new KTS diagnosis equipment, together with
All ESI[tronic] information on DVD the ESI[tronic] software presents the perfect combination
This software on DVD is activated individually depending of hardware and software for efficient faultanalysis on
on the workshop requirements – e.g. the ESI[tronic]-C the vehicle and professional repairs.
for modern vehicle repair including ECU diagnosis.
The ESI[tronic] subscription provides regular updates
to insure your information is always up to date.

1 Easy connection of the KTS tester with ESI[tronic] software

and operation at the vehicle is particularly simple and fast.

PC / laptop connectivity
Ñ R adio connection with K TS 570/540 wireless
Ñ U SB connection with K TS 570, K TS 540, K TS 530

Connection to the diagnosis socket

2 OBD diagnostics cable (directly or via adapter concept “Easy
Connect” or via the Uni 4 adapter and the existing adapter concept)
Multimeter and oscilloscope connection via measuring cable

1 Bluetooth USB adapter 2 Measurement cables, 2-core Exchange adapter integrated in housing (KTS 570/540/530))
3
5
 KTS 670 for efficient diagnosis
and complex measurements

Mobile diagnostics with the KTS 670 KTS 670: Core element of a professional diagnostic system

More and more workshops are using the KTS Ñ 2-channel multimeter with higher input resistance for
simplified troubleshooting and 2-channel execution
series from Bosch to make diagnosis of complex
of voltage, resistance, and current measurements
vehicle systems efficient. A decision that pays off Ñ In ECU diagnosis, parallel to each test step, the
and provides a head start in competence and signals of the diagnosis cable such as K and L line,
dependable service business. CAN, and J1850 can be tested using the diagnostics
oscilloscope
Modular concept Ñ The high-performance module (KTS 570) from the
Ñ The KTS 670 is portable thanks to a lithium-ion KTS program is integrated in the housing; OBD
rechargeable battery, e.g. for use during road tests exchange adapter (controlled by ESI[tronic])
Ñ Keeping the KTS 670 in the charging station insures Ñ Simple adaptations to future protocol changes by
the rechargeable battery is constantly charged replacing the new internal OBD exchange adapter
Ñ The KTS 670 is ideal for use in the workshop when and by means of a new vehicle adapter connection
mounted on the trolley concept (Easy Connect)

Full range of equipment for Workshop-compatible equipment for everyday use

complicated measurements Ñ Effective protection against impact and water splashes
Ñ The KTS 670 comes with a convenient 2-channel Ñ High mobility by means of practical carrying handle
oscilloscope. Advantage: The mechanic can view and and power supply from vehicle battery or recharge-
evaluate, for example, both lambda sensors on one able batteries during road testing
screen.
Ñ Better signal evaluation thanks to a far higher
scan rate, increased image refresh rate and higher-
resolution x-deflection

6
KTS 670: Top model
with full set of equipment and features

KTS 670: Modular from handheld to trolley

Ñ Together with ESI[tronic], the KTS 670 is the Technical Data KTS 670
professional diagnostic system for vehicles in your PC board Operating system Windows XP, 1 GB
workshop and during road tests main memory, 80 GB hard drive capacity
Ñ Screen with ideal resolution for a brilliant display, Display 12,1" TFT color display with touchscreen,
industrial standard, resulting in
even where light conditions are poor (high brightness
outstanding, brilliance and wide angle
and large angle of view, and a touchscreen) view; resolution SVGA 800 x 600 dpi
Ñ Switch on and off and call up a virtual keyboard via Equipment Multimedia, built-in speaker and headset
a touch-sensitive key connection, installed LAN network card
(10/100 Mbit), PCMCIA standard
Ñ Universal application for passenger cars and
connection enables WLAN connection
commercial vehicles by means of universal OBD con-
Status indicator Via 4 LEDs: On/Off, mains operation,
nector, for 14 V and 28 V vehicle electrical systems battery charge status, hard-drive access
Ñ Simulation mode can be adjusted individually Operation Touchscreen, 2 touch-sensitive keys;
On/Off button, special menu key
(backlighting control, virtual keyboard, etc)
Convincing advantages for the workshop
Lithium-ion battery Service life depending upon charge status
Ñ New adapter concept “Easy Connect” is supported
and application approx. 1 to 2 hours
by the KTS 670
Housing Stable plastic housing, integrated impact
Ñ Automatic recognition of the control unit and reading Protection
of faultmessages Operating 0 to 40 °C
Ñ All newer passenger car and commercial vehicle temperature
models can be tested – even with CAN protocols Weight approx. 4 kg
outside of the OBD CAN standard Connections O
BD diagnostics cable, adapter concept
“Easy Connect”, Uni 4 adapter and existing
Ñ Guided test and repair instructions from the
adapter concept, Multimeter: Channel 1:
workshop software ESI[tronic] Socket yellow (+), blue (-), channel 2: Red
(+) and black (ground), 2 x USB 2.0, LAN
connection, port jacks for contacts for
stationary charger, PS/2 for pointing device
or keyboard, VGA for external monitor,
PCMCIA 2 x type 2 or 1 x type 3, micro-in,
line-out, headset
Dimensions 400 x 300 x 125 mm (W x H x D)

7
 KTS 570 / 540 / 530:
Safe, convenient and quick

KTS 570 wireless: Top-of-the-range model of the new series and KTS 540 wireless: Mobile workshop deployment for fast workflows
workshop all-rounder

Rapid troubleshooting with reliable results is Ñ OBD-exchange adapter integrated in device, for simple
replacement later with an updated version
and will continue to be required for all vehicles
Ñ Simple fastening and releasing by means of a module
brought to the workshop today and in the future. mounting bracket
With KTS technology, you are well equipped to Ñ Visual and acoustic status identification/monitoring of
meet the demands placed on workshops today the wireless connection
Ñ Simulation mode can be adjusted individually via DDC/
by modern vehicle technology.
demonstration possible without vehicle
The easier way to test complex electronics Ñ Resistance measurement with enhanced ranges
Ñ Intelligent and with a secure future due to internal Ñ Continuity tester for locating faults
OBD-exchange adapter Ñ Diode measurement for testing in components
Ñ Software-controlled by ESI[tronic] Ñ Voltage measurement with enhanced measurement functions
Ñ Simple connection of the KTS series to vehicles Ñ Current measurement with additional adaptation option
Ñ Clear communication via multiplexer and cable adap- of FSA current clamps
ter recognition: K and L line, SAE and CAN can be con- Ñ Universal application for passenger cars and commercial
nected to all possible terminals on the OBD connector vehicles by means of universal OBD connector, for 14 V
Ñ Intelligent adapter cable guarantees for the future: and 28 V vehicle electrical systems
– Reliable control of the multiplexer
– Automatic ECU search function

The KTS series from Bosch: KTS 570 / 540 / 530 Secure future through integrated exchange adapter Radio communications technology:
8 Flexible at the vehicle
KTS 570 / 540 wi��l�ss and KTS 530:
Diagnostics experts for the latest technology
Technical Data
Equipment KTS 570: 2-channel multimeter and oscillo-
scope KTS 540, 530: 1-channel multimeter
Weight approx 500 g
Connections OBD diagnostics cable, USB, mains adapter,
operation display
Wireless connection Bluetooth

Mobile communications connection fully in view

Ñ During installation and operation, the status of the
wireless connection is constantly indicated in the task
bar on the screen
Ñ If the wireless connection is lost, an acoustic signal sounds

Communication No communication Connection ok ... not ok

Data exchange by radio: From KTS 570/540 wireless to PC

KTS 570 / 540 wireless: Convenient and mobile Simplified adapter concept “Easy Connect”
thanks to wireless Bluetooth data transfer For reliable recognition of manufacturer-specific
Ñ Bluetooth Standard Class 1 with a range of up to 100 m diagnostic connections, Bosch now introduces the new
Ñ Bluetooth USB adapter from Bosch included in scope of simplified adapter concept “Easy Connect”. Now, all that
delivery for convenient and simple initial installation needs to be done for reliable control unit diagnostics is
Ñ Control and activation of the installation by means of the to join the manufacturer-specific adapter cable and the
integral DDC (Diagnostics Device Configuration) software OBD diagnostics cable to make a direct connection.
Ñ Automatic KTS module search
KTS 570 / 540 / 530
Ñ Wireless connection test by the integrated transducer
Ñ Operating system supported: MS Windows XP, Vista
Ñ Test program for testing the wireless connection
Home Premium, Vista Business, Windows 7 32 bit
KTS 530 without radio module, otherwise same functions Ñ The USB interface means that the KTS 570, KTS 540
as KTS 540 and KTS 530 can be connected to all common
laptops / PCs
Ñ Mounting bracket included

Oscilloscope measurement parallel to diagnosis 2-channel oscilloscope for Component signal and
optimum troubleshootinge actual value at a glance 9
 Data Exchang� Platfo�m DXP for even more
economical processes in the workshop
ECU Diagnosis
KTS

Engine System DXP ne Emission

or k twor
Testing FSA etw k Analysis BEA
XPn
D

Wheel
Alignment
Brake Testing FWA
BSA
DX PC/
P ne
two Server
rk

New! Data Exchange Platform DXP – the efficient Benefits to the workshop
workshop software from Bosch
Ñ Networking of all diagnostic devices Ñ More efficient due to simplified processes and
Ñ Fast, simple, reliable data exchange between all short setup times
PC-based testers in the workshop Ñ No duplicated work thanks to one-time vehicle
Ñ Direct activation of the ECU diagnosis (KTS) from identification
every DXP-networked test system. Ñ Easier subsequent identification saves time
Ñ Central storage of identification data and result Ñ Central access to ECU diagnosis from every
records and exchange with the Workshop Manage- test system
ment System (WMS) Ñ Customer-friendly through rapid processing of
order data and results
Once recorded – accessible at any time, Ñ Transparent and service-oriented, standardized
and everywhere test records
DXP from Bosch transfers all vehicle data recorded by a Ñ A database for the entire vehicle history with
system to all other diagnostic systems integrated in the all test results
DXP network. Once identified, input of the license plate
number or VIN (vehicle identification number) is suffici-
ent to call up the vehicle data at all workstations.
This saves time. All testers from Bosch, Beissbarth and
Sicam have networking-capability.

The technical requirements Minimum requirements for PC or notebook

Any modern PC can be used as a server. Bosch recom- The software can be inst alled on every PC in the
mends the use of a separate preconfigured server. workshop.
An interface makes connection to many Workshop Ñ Dual Core processor
Management Systems possible. Ñ At least 2 GB main memory
Ñ At least 150 GB hard-disk memory

10
KTS 515: Entry level access to mobile OBD
and reprogramming in line with Euro 5

KTS 515 für die On-Board-Diagnose

With OBD (On Board Diagnostics), a Europe- Malfunction display

(MI Malfunction Indicator)
wide standard for emission values and their
The malfunction indicator is a yellow
correct testing was introduced. Simple, fast and indicator lamp with the symbol of an engine.
workshop-oriented testing of emission values in
accordance with the OBD standard: The KTS 515 Technical data KTS 515

is the perfect entry level solution for this task, Weight 0.33 kg
Printout on commercial-type printer (via PC)
providing connection to an existing PC or laptop.
Connections OBD diagnostics cable, USB,
Bluetooth, power supply unit,
KTS 515: The ideal OBD solution for the diagnosis operating display
of exhaustgas-related systems Dimensions 170 x 120 x 35 mm (W x H x D)
Ñ Reads out OBD modes 1–9
(current range of functions of the OBD standard)
Equipment supply
Ñ Display of standardized P0 codes
Module, OBD diagnostics cable, PC module connecting
Ñ Supports all four communication protocols
cable (USB), USB Bluetooth adapter, software exhaust
Ñ OBD module for retrofitting Bosch exhaust-gas testers
test OBD with KTS 515 PC program, power supply unit,
Ñ The usual, straightforward operator guidance
case.
Ñ Software update option with extension of the OBD
standard
Accessories
Ñ Reprogramming of electronic control unit, in
Ñ Longer PC connecting cables
accordance with Euro 5
– USB 2 m 1 684 465 507
Ñ Pass-Thru capability: Complete OBD diagnosis for all
– Adapter cable 5 m 1 684 465 567
vehicle brands
Ñ Load reduction on workshop diagnostic devices for For operation of the KTS 515, a PC or notebook with the following
control unit reprogramming features is necessary: CD drive, Win XP, minimum 128 MB main
memory, a free USB or serial interface and at least 600 MB hard
General: Only testers that are already Euro 5-compatible can be disk capacity for the software installation.
used for ECU reprogramming. This only includes devices in which a
"Pass-Thru Interface" is already integrated. At Bosch, the KTS 670,
570, 540, 530, 515, and 340 can be used for this.

11
 KTS 800 T�uck: The professional solution
for commercial vehicles

Complete system for commercial vehicles KTS 800 Truck: DCU 130 and KTS Truck Modul

With the KTS 800 Truck and the software package Testers in line with workshop needs
Ñ Easy handling of the DCU 130 with integrated hand
ESI[tronic] for Truck, the commercial vehicle work-
grip on the back of the device
shop gets the complete solution for the diagnosis of Ñ Sturdy housing with 13.3" touchscreen monitor
light commercial vehicles, trucks, buses, and trailers. Ñ Recessed USB connection to enable protected
connection of a dongle
Mobile complete system Ñ Conspicuous features of the vehicle can be documented
Ñ New! KTS 800 Truck: Diagnostic for immediate use with the integrated camera and the required spare
Control Unit (DCU 130) and mobile KTS Truck module parts can be photographed.
Ñ Two lithium-ion batteries enable mobile deployment
of the DCU 130 everywhere in the workshop or even Modular concept with the Diagnostic Control Unit
during a test drive. Ñ Especially for deployment in the workshop, the sturdy
DCU 130 controls all testing and diagnostic systems
Mobile work over long periods from Bosch, for example the new FSA 500.
Ñ Inclusion of two identical lithium-ion batteries
Ñ One battery is sufficient to continue operation in
the workshop
Ñ If required, the batteries can be replaced without inter -
ruption during regular operation (hot swap function).

Integrated hand grip Recessed USB connection Hot swap function

12
 KTS T�uck: The modular solution
for commercial vehicles

KTS Truck module Modular concept with Bluetooth connection

KTS Truck is the ideal entry-level solution for Technical data DCU 130

commercial vehicle workshops that already have PC board Intel Merom 1.06 GHz DualCore processor,
Operating system Windows 7, 2 GB main
a PC. memory, 250 GB hard disk capacity
Display 13.3" WXGA color display with resistive
Optimized and mobile diagnostics solution 5-wire touchscreen, resolution
1280 x 800 dpi
Ñ KTS Truck module for light commercial vehicles,
Equipment Multimedia, integrated camera min.
trucks, trailers, and buses
2 megapixels, Bluetooth class 1 and 2,
Ñ Can be connected to DCU 130, PC or laptop WLAN 802.11 a / b / g / n. Ethernet 10 / 100 Mbit
Ñ Integrated Bluetooth connection with large range, Status indicator Via 4 LEDs: On / Off, hard-drive access,
up to 100 m WLAN, Bluetooth
Ñ Bluetooth USB adapter included in equipment supply Interfaces 2 USB 2.0
Ñ Sturdy housing 1 USB 2.0 integrated as recessed
1 RJ45 10 / 100 Mbit
1 MIC IN
KTS Truck 1 connection for headset
Ñ The following operating systems are supported: Lithium-ion battery 2 lithium-ion batteries 14.4 V, 32 Wh.
MS Windows XP, Windows Vista and Windows 7 Batteries with charge status indicator

Ñ The USB interface means KTS Truck can be connected Housing Sturdy housing, IP 54 (IP 65 at front)

to all common laptops / PCs Operating temperature 0 to 40 °C

Dimensions 355 x 262 x 42 mm (W x H x D without handle)

Integrated digital camera Status LED display USB Bluetooth

13
 ESI[t�onic] fo� T�uck: All information
and functions for commercial vehicles

Vehicle information

Everything at one stop

Alongside control unit diagnosis, the ESI[tronic] for Truck
software also contains technical information such as wiring
diagrams, service instructions as well as system information.
ECU diagnosis
Also available are Bosch spare parts catalogs, including the
catalog data of the Bosch cooperation partner ZF Services,
also with service information and installation instructions
for products of the Sachs, Lemförder, Boge, and ZF Parts
brands. ESI[tronic] for Truck provides all the necessary infor-
mation for the execution of reliable diagnosis, complete main-
tenance, and efficient repair.The software package features
high market coverage for light commercial vehicles, trucks,
trailers, and buses common on the European market.

Vehicle information
Alongside control unit diagnosis, the ESI[tronic] for Truck
Technical data (test values)
software also contains technical information such as wiring
diagrams, service and repair instructions. Basic information
regarding commercial vehicles that is also included in the
software such as model series, power output, engine des-
ignation as well as axle configuration forms the basis for a
sound diagnosis in the commercial vehicle workshop.

System information

14
 Wiring diagrams

Diagnosis
Important functions for the commercial vehicle workshop
are included: Reading and deleting faultcodes, selecting
actual values, activating actuators, resetting service inter-
Maintenance
vals, and adjusting components.

Technical data
ESI[tronic] for Truck provides comprehensive support in
troubleshooting: through test values and system information
with specified, output voltage, characteristic curves, etc.

Wiring diagrams
The intuitive operation with dynamic component description
makes operation simple and fast.

Maintenance
Spare parts catalog
The semi-annual and annual inspections with additional
control items can be called up at any time.

Spare parts catalog

Always accessible: the complete spare parts catalog
from Bosch and ZF Services
Ñ Manual and automatic transmissions
Ñ Suspension
Ñ Steering
Ñ Clutch

Installation instructions

15
 KTS 340: Easy to use.
Hard to beat.

KTS 340: Compact, complete, mobile – the new diagnostics tester from Bosch

A tester for all purposes High benefits for the workshop

Many workshops want a multifunctional tester. The KTS Ñ Test professional with full range: ECU diagnosis,
340 fulfills this desire. All “tools” necessary for trouble- troubleshooting, repair and maintenance
shooting are available in the tester. It is ideally suitable Ñ New intuitive operating concept covering all information
for independent workshops and fast fitters, or as a Ñ Fast and easy to operate via the touchscreen –
secondary device for mobile use. with a standardized screen concept
Ñ Can be switched over immediately: From control unit
ESI[tronic] software makes it easy diagnosis to troubleshooting (component repair) and
The KTS 340 can be operated easily thanks to the clearly vice versa
arranged and structured software. This starts with the Ñ Ideal in service – speeds up the work steps that make
standardized, optimized vehicle identification. The work- money for the workshop
shop easily manages all types of information for trouble Ñ Easy to handle, mobile everywhere in the workshop
shooting: Whether from the system overview direct to and can be used in or on the vehicle
diagnosis and troubleshooting, from troubleshooting and
the maintenance schedule direct to diagnosis, or from Modern test equipment
diagnosis direct to component repair. Ñ 2-channel multimeter: CAS[plus] also makes the
multimeter function available directly on the trouble-
Information and measuring technology shooting interface: Resistance, current and voltage
The new KTS 340 provides all necessary information values with automatic target-actual comparison. The
and the measuring technology for ECU diagnosis, guided measured values can also be displayed as curves
troubleshooting, repair, maintenance and service. Ñ Can perform all workshop tasks: Integrated measu-
ring technology and integrated WLAN (in preparation)
Workshop-compatible for modern systems Ñ Mobile power supply through rechargeable batteries
The tester is tailored to repairs with ECU diagnosis soft-
ware, fault-finding instructions, maintenance
information and integrated multimeters. And everything
is guided by new, practical menu navigation tuned to
work sequences in the workshop.

16
Mod��n t�st �quipm�nt:
Robust, light and fast

Comprehensive basic equipment supplied with a sturdy case Energy supply guaranteed: The new variable charging tray

Adapter: Equipped for the future

Ñ The current adapter is integrated in the housing. Fast All-in-one solution for diagnosis, troubleshooting,
updating is possible at any time following changes to repair and maintenance
vehicle interfaces Good management of vehicle information
Ñ Future-proof: Integrated OBD adapter. Higher-order information, such as details on
the vehicle, which systems are installed, or
where the diagnostics socket is located in the
Wireless and mobile vehicle
About WLAN (in preparation), e.g. protocols and
Use of ECU diagnosis
maintenance plans can be printed out wirelessly via PC. Direct access to the ECU diagnosis:
Tester functions “Read fault memory”, “
Delete fault memory”, actual values,
setpoint values and actuator test

All functions quickly under control

SIS/CAS[plus] offers vehicle- and system-
specific information on the selected vehicle
system
Technical Data KTS 340
PC board Operating system Linux, 8 GB SD Card Maintenance
Display 8.4“ TFT color display with touchscreen Here you will find a clearly arranged and
Resolution SVGA 800 x 600 dpi systematic presentation of all information
required for maintenance
Equipment 2-channel multimeter and WLAN integrated
Status indicator Via 2 LEDs: On/Off, mains operation,
battery charge status TSB Technical Service Information
Battery Service life depending on charge status Ideal supplement to SIS instructions for
and application approx. 1 to 2 hours,, rapid access to well-known vehicle faults and
8 x AA cells, rechargeable offers assignment according to symptom and
system group (ABS, airbag, engine, etc.)
Housing Stable plastic housing, integrated impact
protection Precise and fast measuring technology
Operating 0 to 40 °C Comprehensive multimeter capabilities for
temperature resistance measurement, diode measure-
Weight approx. 2 kg ment, voltage measurement and current
measurement
Dimensions 290 x 214 x 67 mm (W x H x D)

17
 Achi�v� you� goal fast��: ECU diagnosis
SD and troubleshooting instructions SIS

New flexibility: Can jump at any time from ECU

diagnosis to troubleshooting or component repair

Clearly arranged information presentation: Up to 8

actual values can be displayed at the same time

Selection of the possibly defective vehicle system

ECU diagnosis: More than simply fault codes

After “Read out fault memory”, the software already links
the fault codes to the fault-finding instructions (component
repair).

Troubleshooting made easy

SIS troubleshooting instructions show the way to success-
“Networked” troubleshooting: Troubleshooting instruc-
tions with detailed fault description can be called up
ful repair. Further information is also available, such as
hydraulic, pneumatic and electric connection diagrams.

CAS[plus] links the troubleshooting instructions to

diagnostics
ESI[tronic] with CAS[plus] guides the mechanic through all
test steps and always provides the information and diagnos-
tics functions necessary for repair. Actual values supplied
by the diagnostics are compared with the setpoint values
from the instructions.

All important information readily available: E.g. wiring diagrams

18
Wh�n, what and wh���:
Vehicle information and maintenance M

Vehicle information: All higher-order information on

the vehicle: Details, systems and diagnostics socket

Maintenance illustrations: All information at a glance

Vehicle information:
All important information quickly available
All higher-order information on the vehicle, such as details,
installed systems and the position of the diagnostics socket
New: The simple switch from the equipment system directly
to diagnostics and troubleshooting.

Comparable at all times: All test values can be

Maintenance: Well organized according to a schedule displayed at the interface
The central starting point for maintenance is the main-
tenance schedule, which also permits direct access to
diagnostics and test values. All information necessary for
performing maintenance is available, e.g. maintenance illus-
trations, toothed belt information,
tire pressures, etc.

TSB Technical Service Information

As an ideal supplement to the SIS instructions, TSB permits
rapid access to well-known vehicle faults. This is combined
with a clear description of causes, supplemented by tested
repair tips with visual support.
All information on toothed belt change
19
 KTS 200: Perfectly suited
to the workshop

The workshop pro KTS 200: Compact, fast and tough

KTS 200 from Bosch: The right testing device Powered by ESI[tronic]-Software
for every workshop The KTS 200 is supplied with the preinstalled, specially
Today’s daily workshop operation is impossible without further developed ESI[tronic] software. This makes
an efficient and easily handled testing device. The KTS operation of the KTS 200 particularly simple and fast.
200 is light, robust and compact and, at the same time, Key functions are displayed on the screen. For each of
provides complete ECU diagnosis. Its strength lies in fast the service package, all essential information about the
and reliable testing of modern vehicle technology. control units and special functions, e.g. engine/brake
systems, are available.
Particularly practical: The KTS 200 can be connected
directly at the vehicle. This facilitates and accelerates
Perfectly tailored to your service profile
the vehicle receiving inspection. This type of mobility
For systematic service and cost-effective repair, whether
alone makes it an ideal secondary device for every work-
in tire service or mechanical operation, every workshop
shop. For workshops with tight work processes, in
needs important information from the vehicle‘s control
particular, such as immediate service, oil service, light
units.
service, tire services, etc., it proves to be perfect test
equipment.

20
 Comp��h�nsiv� softwa�� packag�s
for individual workshop requirements

Precise adjustment of the automatic headlamp leveling control Without ECU diagnosis, the modern workshop would come to a standstill.

Professional package Technical data KTS 200

The ideal package for allrounders with the complete Computer Embedded System
scope and range of ECU diagnosis.Including the daily Display 3.5“ color LCD display
activities relevant to the workshop: ¼ VGA with 320 x 240 pixels
Ñ Service interval reset Operation Keyboard with 5 selection keys
Ñ Oil change duplicated for left/right operation,
2 function keys
Ñ Tire change
Housing Plastic housing with rubber coating
Ñ Headlight service
Weight 600 g
Ñ Air conditioning service
Connections OBD diagnostics cable, USB,
Ñ Brake service supply voltage
Ñ Initializing sensors after chassis examination Dimensions 220 x 140 x 40 mm (W x H x D)
Ñ Installation of accessories (trailer hitch, radio,
navigation systems, luggage racks, etc.)

21
 KTS functions
at a glance

KTS functions KTS 800 KTS 670 KTS 570 KTS 540 KTS 530 KTS 515 KTS Truck KTS 340 KTS 200

Truck

Diagnostics programs, passenger cars – ✔ ✔ ✔ ✔ – ✔ ✔ ✔

- ISO systems for EU vehicles
- ISO 9141-2, K / L lines, blink code
- SAE systems for American and
Japanese vehicles
- SAE J 1850 VPW (Ford)
corresponds to ISO 11 519-4
- SAE J 1850 PWM (GM,...)
corresponds to ISO 11 519-4
- OBD CAN protocols
- CAN ISO 11898 ISO 15765-4 OBD
- High-speed
- High-speed, middle-speed,
Low-speed and single-wire CAN
Diagnostics programs for commercial vehicles ✔ – – – – – ✔ – –
- SAE J 1939
Mobile communications connection to the PC ✔ – ✔ ✔ ✔ ✔ ✔ ✔ –
- Bluetooth ✔ – ✔ ✔ ✔ ✔ ✔ – –
- WLAN ✔ – – – – – – ✔ –
USB interface ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
AWN capability ✔ ✔ ✔ ✔ ✔ – – – –
Integration into company-internal networks ✔ ✔ – – – – – – –
Measuring techniques – ✔ ✔ ✔ ✔ ✔ – – –
Accuracy: 1% of measured value
Voltage: Min. resolution 0.1 mV;
max. measurement range 200 V
Resistance: Min. resolution 100 mOhm;
max. measurement range 1mOhm
Current: Min. resolution 0.1 mA;
max. measurement range 1000 A
(special accessory)
- 1-channel multimeter – – – ✔ ✔ – – – –
- 2-channel multimeter – ✔ ✔ – – – – ✔ –
- 2-channel oscilloscope – ✔ ✔ – – – – – –
Input resistance: 1 mOhm
Trigger: Various sources
Memory: 50 signal curve each with 2 channels
Channel 1: No voltage
Channel 2: No voltage
1-channel operation: 10 megasamples / sec
2-channel operation: 2x5 megasamples / sec
Display 13.3" 12.1" – – – – – 8.4" 3.5"
Operation ✔ ✔ – – – – – ✔ ✔
- Touchscreen ✔ ✔ – – – – – ✔ –
- Buttons ✔ ✔ – – – – – ✔ ✔
OBD-exchange adapter, controlled by software
ESI[tronic]
- Interchangeable – ✔ ✔ ✔ ✔ ✔ – ✔ –
- Multiplex system – ✔ ✔ ✔ ✔ ✔ – ✔ ✔

Model Order number Model Order number Model Order number

KTS 800 Truck 0 684 400 800 KTS 540 0 684 400 540 KTS Truck 0 684 400 512
KTS 670 0 684 400 670 KTS 530 0 684 400 530 KTS 340 0 684 400 340
KTS 570 0 684 400 570 KTS 515 0 684 400 515 KTS 200 0 684 400 200

22
KTS functions
at a glance

1 1 1 1 1 1 1 1 1
KTS 800 KTS 670 KTS 570 KTS 540 KTS 530 KTS 515 KTS Truck KTS 340 KTS 200
Truck

KTS functions
Connection option
- DVD drive ✔ ✔ – – – – – – –
- Keyboard / mouse ✔ ✔ – – – – – – –
- Printer connection ✔ ✔ – – – – – ✔ –
Equipment in line with workshop needs
- Effective impact protection ✔ ✔ – – – – – ✔ ✔
- Splash protected ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
- Functional temperature range 0 to 40 °C ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Power supply
- Via vehicle battery (diagnostic plug) – ✔ ✔ ✔ ✔ ✔ – ✔ ✔
- Via internal battery ✔ ✔ – – – – – ✔ –
- Via cigarette lighter ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
- Via mains adapter ✔ ✔ ✔ ✔ ✔ ✔ – ✔ ✔
Adapter concept "Easy Connect" – ✔ ✔ ✔ ✔ – – – ✔
Possible ESI[tronic] information
- Catalog and parts information ✔ ✔ ✔ ✔ ✔ – ✔ – –
- Order processing and calculation ✔ ✔ – – – – – – –
- Diagnostics and repair at the vehicle ✔ ✔ ✔ ✔ ✔ – ✔ ✔ –
- Diagnostics and repair at the product ✔ ✔ ✔ ✔ ✔ – – – –
- Diagnostics ✔ ✔ ✔ ✔ ✔ – ✔ ✔ ✔
- OBD diagnostics ✔ 3 ✔ ✔ ✔ ✔ ✔ ✔ 3 ✔ ✔
Equipment supply
Mains adapter (15 V / 1 A) – – ✔ ✔ ✔ ✔ – – ✔
Mains adapter (15 V / 4 A) – ✔ – – – – – ✔ –
Mains adapter (20 V / 3.5 A) ✔ – – – – – – – –
Mains connection cable ✔ ✔ ✔ ✔ ✔ ✔ – ✔ ✔
OBD exchange adapter, interchangeable ✔ ✔ ✔ ✔ – ✔ –
OBD diagnosis cable 1.5 m ✔ 2 – ✔ ✔ – ✔ ✔ 2 – ✔
OBD diagnosis cable 3.0 m ✔ – – ✔ – ✔ –
Uni-4 adapter – ✔ ✔ ✔ ✔ – – ✔ –
Universal adapter set ✔ – – – – – ✔ – –
Measurement cable, 2-wire (red, black) 3 m – ✔ ✔ – – – – – –
Measurement cable, 2-wire (blue, yellow) 3 m – ✔ ✔ – – – – – –
Measurement cable, blue / yellow – – – ✔ ✔ – – ✔ –
Measurement cable, black – ✔ ✔ ✔ ✔ – – ✔ –
Test probe, red – 2x 2x ✔ ✔ – – 2x –
Connection terminal, black – ✔ ✔ ✔ ✔ – – ✔ –
DVD drive ✔ ✔ – – – – – – –
USB connecting line 1 m ✔ ✔ – – – ✔ ✔ – ✔
USB connecting line 3 m – – ✔ ✔ ✔ – – ✔ –
Bluetooth USB adapter ✔ – ✔ ✔ – ✔ ✔ – –
Touchpen ✔ ✔ – – – – – ✔ –
Carrying case ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Mounting (KTS 530 / 540 / 570) – – ✔ ✔ ✔ – – – –
8x battery AA cells for KTS 340 – – – – – – – ✔ –
2x lithium-ion batteries for DCU 130 ✔ – – – – – – – –

1 Device only operative with ESI[tronic] enabling / licensing 2 OBD diagnosis cable Truck 0.9 m 3 In preparation 23
 Scop� of d�liv��y
of the KTS series

Scope of delivery KTS 670 Accessory kit included with the KTS 570

KTS 670: The complete diagnostics device for the KTS 570: The convenient wireless solution with top
workshop and on test drives measuring technology for even more diagnosis
Ñ Mobile test system The control unit diagnostics device with 2-channel
Ñ Optimized interplay of hardware and software measuring technology for multimeter/oscilloscope
Ñ Short access times for rapid diagnoses Ñ Complete ECU diagnosis
Ñ Brilliant, bright display with large read-off angle Ñ 2-channel oscilloscopefs
Ñ User friendly in every way Ñ 2-channel multimeter
Ñ Improved measuring technology of the KTS 570 Ñ Diagnostics oscilloscope
integrated Ñ Other ESI[tronic] info types possible
Ñ Optimized measuring technology for complex Ñ Adapter concept “Easy Connect”,
troubleshooting can be connected directly
Ñ Adapter concept “Easy Connect”, can be connected directly
Ñ ESI[tronic] info type A, C and M preinstalled

Comprehensive basic equipment for KTS 340 supplied Accessory kit included with the KTS 200

KTS 340: Mobile all-round solution for KTS 200: Entry level version for
comprehensive vehicle diagnosis comprehensive ECU diagnosis
Professional tester with complete program: The proven entry into ECU diagnosis with new menu
Ñ Mobile test system guidance for simple and rapid diagnoses
Ñ All-in-one solution for diagnostics, Ñ Complete ECU diagnosis
troubleshooting, repair and maintenance Ñ Adapter concept “Easy Connect”,
Ñ Customer-friendly operating and control concept can be connected directly
Ñ Fault found with only 10 clicks
Ñ Adapter concept “Easy Connect”,
can be connected directly
24
Adapt�� conc�pt
„Easy Connect“

BMW 20-pin Daewoo/GM 12-pin Fiat-Gruppe 3-pin Honda 3- and 5-pin Hyundai/Mitsubishi 12-pin
1 684 463 631 1 684 463 632 1 684 463 613 1 684 463 634 1 684 463 638

Mazda 25-pin KIA 20-pin Nissan 14-pin Peugeot 30-pin (PSA 30) Renault Nfz 12-pin
1 684 463 637 1 684 463 636 1 684 463 639 1 684 465 583 1 684 465 581

Renault Pkw 12-pin Toyota without Pin 1/9 Toyota 17-pin Toyota 23-pin VW/Audi
1 684 465 582 1 684 463 686 1 684 463 642 1 684 463 643 1 684 463 611

Carrying case with vehicle-specifi c

adaptations for simple, rapid connec-
tions with no risk of confusion.
Mercedes Benz Mitsubishi 1 Carrying case for cable set 2
1 684 463 594 1 684 463 741 1 684 011 516/1 684 011 517

Convincing advantages for the workshop Ñ Check of connection and

Ñ Only one direct connection cable matching connection cable
Ñ Automatic recognition of the vehicle-specific Ñ Fewer plug connections
connections Ñ Simplified and intelligent multiplexer control
Ñ Simple, fast and non-interchangable Ñ Software-controlled communication pin selection
adaptation on vehicle

1 Only for KTS 200 2 Country-specifi c version

25
 KTS series�
�������
Data and facts
Special accessory Order number KTS 800 Truck KTS 670 KTS 570 / 530 / 540 KTS Truck KTS 340 KTS 200
Tire valve activator 1 687 200 663 – ✔ ✔ – ✔ ✔
Printer PDR 372 1 1 687 023 508 ✔ ✔ ✔ ✔ ✔ ✔
USB connecting line 1.0 m 1 684 465 491 ✔ ✔ ✔ ✔ ✔ ✔
Touchpen KTS 340 1 683 083 007 – – – – ✔ –
Touchpen KTS 670 (3 units) 1 683 083 004 – ✔ – – – –
Touchpen KTS 800 Truck 1 683 083 008 ✔ – – – – –
Charging tray KTS 340 1 687 023 477 – – – – ✔ –
Charging tray KTS 670 1 687 022 898 – ✔ – – – –
Battery charging station DCU 130 1 687 335 036 ✔ – – – –
Trolley with charging tray 1 688 003 192 – ✔ – – – –
Test shunt 0 to 600 mA 1 684 503 103 – ✔ ✔ – ✔ –
AC / DC current clamp 100 / 600 A 1 687 224 864 – ✔ ✔ – ✔ –
Mounting (KTS 200) 1 681 320 082 – – – – – –
Battery for KTS 340 (order 8 units) 1 687 335 031 – – – – ✔ ✔
Battery for DCU 130 1 687 335 037 ✔ – – – – –
1 Also order USB connecting line

Special accessories Order number KTS 800 Truck KTS Truck

Adapter cables for trucks
Adapter cable Volvo 1 684 463 770 ✔ ✔
Adapter cable Iveco (models with year of manufacture before 96) 3 pin 1 684 463 771 ✔ ✔
Adapter cable MB 14 pin 1 684 463 772 ✔ ✔
Adapter cable Scania (models with year of manufacture before 2004) 1 684 463 793 ✔ ✔
Adapter cable Renault VI 1 684 463 773 ✔ ✔
Adapter cable Iveco (models with year of manufacture after 96) 1 684 463 774 ✔ ✔
Adapter cable MAN TG (circular) 1 684 463 775 ✔ ✔
Adapter cable DAF & SCANIA 1 684 463 776 ✔ ✔
Adapter cable MAN Series 2000 1 684 463 777 ✔ ✔
Adapter cables for trailers
Adapter cable ABS Module 1 687 001 778 ✔ ✔
Adapter cable ABS Module 1 684 463 779 ✔ ✔
Adapter cable Wabco / Knorr Trailer ABS / EBS 1 684 463 780 ✔ ✔
Adapter cable EB+ 1 684 463 781 ✔ ✔
Adapter cable ISO 7638 1 684 463 782 ✔ ✔
Adapter cable for buses
Adapter cable ABS VOLVO Bus 1 684 463 783 ✔ ✔
Adapter cable ECS VOLVO Bus 1 684 463 784 ✔ ✔
Adapter cable ZF 1 684 463 785 ✔ ✔
Adapter cables for light commercial vehicles
Adapter cable Iveco Daily 1 684 463 786 ✔ ✔
Adapter cable VW LT / T4 1 684 463 787 ✔ ✔
Adapter cable Citroen / Peugeot Boxer 1 684 463 788 ✔ ✔
Adapter cables for US trucks
Adapter cable US protocol 6 pin 1 684 463 789 ✔ ✔
Adapter cable US protocol 9 pin 1 684 463 790 ✔ ✔
Cable sets
Cable set for trucks Volvo, Iveco < 96, MB 14 pin, Scania < 2004, Renault, MAN TG circular, 1 687 001 944 ✔ ✔
MAN Series 2000, DAF & Scania circular and including carrying case)

Cable set for trailers (ABS modal, ABS modular, Wabco / Knorr ABS /  EPS trailer, EB+, ISO 7638) 1 687 001 945 ✔ ✔
Cable set for buses (ABS Volvo, EPS Volvo, ZF Adapter) 1 687 001 946 ✔ ✔
Cable set for light commercial vehicles (IVECO Daily, VW LT / T4, Citroen / Peugeot Boxer) 1 687 001 947 ✔ ✔
26
KTS 200  / 340  / 530  / 540  / 570  /  670
Data and facts  

Special accessory Order number KTS 200 KTS 340 KTS 670 KTS 530 / 540 / 570
Adapter cables "Easy Connect" (new adapter concept)
Adapter cable BMW 20-pin 1 684 463 631 ✔ ✔ ✔ ✔
Adapter cable Daewoo / GM 12-pin 1 684 463 632 ✔ ✔ ✔ ✔
Adapter cable Fiat Group 3-pin 1 684 463 613 ✔ ✔ ✔ ✔
Adapter cable Honda 3-pin and 5-pin 1 684 463 634 ✔ ✔ ✔ ✔
Adapter cable Hyundai / Mitsubishi 12-pin 1 684 463 638 ✔ ✔ ✔ ✔
Adapter cable KIA 20-pin 1 684 463 636 ✔ ✔ ✔ ✔
Adapter cable Mazda 25-pin 1 684 463 637 ✔ ✔ ✔ ✔
Adapter cable Nissan 14-pin 1 684 463 639 ✔ ✔ ✔ ✔
Adapter cable Peugeot 30-pin (PSA 30) 1 684 465 583 ✔ ✔ ✔ ✔
Adapter cable Renault commercial vehicles 12-pin 1 684 465 581 ✔ ✔ ✔ ✔
Adapter cable Renault passenger cars 12-pin 1 684 465 582 ✔ ✔ ✔ ✔
Adapter cable Scania / DAF commercial vehicles 16-pin 1 684 463 644 ✔ ✔ ✔ ✔
Adapter cable Suzuki 6-pin 1 684 463 641 ✔ ✔ ✔ ✔
Adapter cable Toyota (Avensis) without pins 1 & 9 1 684 463 686 ✔ ✔ ✔ ✔
Adapter cable Toyota 17-pin 1 684 463 642 ✔ ✔ ✔ ✔
Adapter cable Toyota 23-pin 1 684 463 643 ✔ ✔ ✔ ✔
Adapter cable VW / Audi 1 684 463 611 ✔ ✔ ✔ ✔
Adapter cables (existing adapter concept)
1
Adapter cable Daewoo 1 684 463 489 ✔ ✔ ✔ ✔
1
Adapter cable Ford 1 684 463 440 ✔ ✔ ✔ ✔
1
Adapter cable Ford EEC4 1 684 463 496 ✔ ✔ ✔ ✔
1
Adapter cable Ford (adaptation PSG-5 pump unit via CAN) 1 684 463 652 ✔ ✔ ✔ ✔
1
Adapter cable MAN 37-pin (EDC, MS 5) 1 684 463 498 ✔ ✔ ✔ ✔
1
Adapter cable MAN 12-pin (EDC, MS 6.1, MS 6.4, CR, EDC7C) 1 684 463 499 ✔ ✔ ✔ ✔
1
Adapter cable Mercedes-Benz 1 684 447 032 ✔ ✔ ✔ ✔
1
Adapter cable Mercedes-Benz (Sprinter, Atego) 1 684 463 494 ✔ ✔ ✔ ✔
1
Adapter cable Opel Multec 1 684 463 410 ✔ ✔ ✔ ✔
1
Adapter cable Opel Vauxhall 1 684 463 464 ✔ ✔ ✔ ✔
1
Adapter cable PSA (+ / - clip) 1 684 460 182 ✔ ✔ ✔ ✔
1
Adapter cable PSA 2-pin 1 684 460 181 ✔ ✔ ✔ ✔
1
Adapter cable Renault 1 684 463 468 ✔ ✔ ✔ ✔
1
Adapter cable Rover 1 684 463 439 ✔ ✔ ✔ ✔
1
Adapter cable Scania 16-pin (R 124, R144) 1 684 463 497 ✔ ✔ ✔ ✔
1
Adapter cable for power supply (connection to cigarette lighter) 1 684 460 202 ✔ ✔ ✔ ✔
Power supply banana connector and power supply socket 2 1 684 460 231 ✔ ✔ ✔ ✔
Uni-4 adapter 1 684 463 539 ✔ – – –
OBD diagnostics cable 1.5 m 1 684 465 555 – ✔ ✔ –
OBD diagnostics cable 3 m 1 684 465 557 ✔ – – ✔
OBD diagnostics cable 5 m 1 684 465 567 ✔ ✔ ✔ ✔
OBD adapter box with OBD connector 1 684 462 514 ✔ ✔ ✔ ✔
Level adaptation 12 V / 5 V 1 684 463 495 ✔ ✔ ✔ ✔
1
Test adapter Mercedes-Benz 38-pin 1 684 485 382 ✔ ✔ ✔ ✔
Test cable set 1 687 011 208 ✔ ✔ ✔ ✔
KTS cable set, consisting of:
For MB, Ford EEC4, Opel Vauxhall, Opel Multec, BMW and VW 1 687 001 855 – ✔ ✔ ✔
KTS cable set, consisting of: Uni line,
Uni connector set and adapter cables for MB, Ford EEC4, Opel Vauxhall, Opel Multec, BMW and VW 1 687 001 875 ✔ – – –
KTS cable set, consisting of:
Adapter cable for PSA, Fiat, Lancia, Alfa, Citroen, Peugeot, Renault, BMW 1 687 001 517 ✔1 ✔ ✔ ✔
KTS cable set, consisting of:
Adapter cable for VW, Audi, Fiat, BMW, MB, Toyota, Peugeot 1 687 001 516 ✔1 ✔ ✔ ✔

1 Only in conjunction with Uni 4 adapter 1 684 463 539 (4-way KTS 200, 340, 530, 540, 570, 670)
2 Nur in Verbindung mit 1 684 460 182 oder 1 684 460 202

Connection to the vehicle depends on the diagnostics socket

Connection possibilities are the OBD diagnostics cable or OBD diagnostics cable plus
„Easy Connect“ or the OBD diagnostics cable plus Uni 4 adapter with vehicle-specific cable.

27
Bosch: Your partner for the
workshop of the future
For over 120 years, innovations from Bosch have kept vehicles
inmotion to ensure that people get from A to B safely and
comfortably.

Bosch Automotive Aftermarket offers the trade and workshops a

worldwide, unique combination of:
Ñ Efficient diagnosis
Ñ Modern workshop equipment
Ñ Quick and reliable delivery service
Ñ The most extensive range of replacement parts in the market
Ñ Workshop concept for all requirements
Ñ Comprehensive range of training courses
Ñ Targeted sales and marketing promotion
Ñ Competent Hotline
Ñ Workshop portal available 24 hours every day
Ñ Favorable leasing offers for workshop equipment and software
Ñ And many other services to guarantee your success

AA-DGP/MKT 1 987 XXX (201009) The right to make changes of a technical nature and to alter the range on offer is reserved.
When this is all combined, not only the parts fit into place but also
the time schedule, organization and the result.

Workshop tip:
Geared to the growing proportion of electronics in vehicles, Bosch
offers workshops suitable test equipment for all workshop sizes
and service concepts.

Diagnostics and parts: you only find both at Bosch.

Robert Bosch GmbH

Automotive Aftermarket
Business Unit Diagnostics
Engine system testing FSA
and emission analysis BEA
73201 Plochingen
Germany
www.bosch-diagnostics.com