Scribd
Upload
261 views31 pages

DUW Commissioning

Use RBB12_1A for 2 carriers and RBB22_1A for 3 carriers. Follow the provided script for IP, VLAN, subnet, and router configuration for RAN traffic and OAM. Configure the primary and secondary NTP servers after insertion of the primary hub position and reboot. Finally, ping the OSS IP 10.230.32.228 to confirm configuration is complete.

Uploaded by

Ova Døse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
261 views31 pages

DUW Commissioning

Use RBB12_1A for 2 carriers and RBB22_1A for 3 carriers. Follow the provided script for IP, VLAN, subnet, and router configuration for RAN traffic and OAM. Configure the primary and secondary NTP servers after insertion of the primary hub position and reboot. Finally, ping the OSS IP 10.230.32.228 to confirm configuration is complete.

Uploaded by

Ova Døse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 31

USE RBB12_1A for 2

Carrier and

RBB22_1A for 3
USE TCU IP/OAM as
carriers
default Router

USE B1(master port)


USE ex4 LTE should be A7
OPEN the IP plan
Site Equipment

Follow RAN traffic for the IP,


VLAN, Subnet and router

Follow the OAM IP, subnet,


VLAN and router
USE the Script Given

Follow plan for NTP


srver

Note: Carrier
allocation should be
flexible for 3 carrier
DUW should be B1
Insert the primaryhub position
and secondary NTP
server
OAM Part
Wait till it reboot and
reconnect

Then Log-in Again set create CV AFTER_CONFIGURATION


Configuration Finish, Now try to ping OSS 10.230.32.228

You might also like