Shirts

Fusing Machines Nowadays the decision to purchase a folded dress shirt is primarily taken due to visual
criteria. Fusing and finishing are very important steps in making a shirt look good.
These days, customers can find a wide range of different types of shirts. Going from very
casual to very formal, every shirt type requires its individual fusing and pressing rules.
VEIT KANNEGIESSER helps you to maintain highest fusing and finishing standards. In
­order to cover all aspects of modern technology, we offer you alternatives for various
operations in the shirt manufacturing process.

Continuous Fusing Machines

AX 450 BH 600 BX 600/1000 EX/EXT 1000

Small fusing machine with a total Working width 600 mm (23.6 inch), Working width 600 mm (23.6 inch) or “A must-have.” Working width 1000 
working width of 450 mm (17.7 inch). for one operator. Ideal for medium- 1000 mm (39.4 inch), ideal for all mm (39.4 inch), the ultimate fusing
Ideal for sample rooms and small sized production facilities for collars kinds of shirts from casual to dress machine. Modular feeding, heating
production facilities. and cuffs. shirts. Multi purpose use, thanks to and pressure system, ideal for all
different pressure systems. Available ­types of shirts. Used in large pro­
from soft to hard. duction facilities.
Advantages: Advantages: Advantages: Advantages:
• Top and bottom heat zone • Separately controlled top and • Separately controlled top and • Separately controlled top and
• Mechanical pressure system, bottom heat zone bottom heat zone bottom heat zone
no air required • Active cooling system • High productivity because of long • High productivity because of long
• One phase power supply only • Requires only one operator for heat zone heat zone
loading and unloading • Pressure systems available from • Single and double pressure
soft to hard ­systems available
• Good for up to 3 operators • Good for up to 5 operators
­loading ­loading

Discontinuous Hydraulic Presses VEIT Power Management

• Insulation of complete machine re-
HKH 5,6/7 Fusing Press duces heat loss and saves energy
Very well known in the industry for • Stand-by mode saves energy
decades. The ultimate fusing ­during idle times
­machine, ideal for formal and dress • Integrated timer to cool down the
shirts. belts after use
Advantages: • Minimized power peaks during
• Hydraulic pressure system for warm-up of the machine
­extra high pressure
• Heat and pressure at the same For more detailed information about
time our product range please see our
• Ideal for collars and cuffs brochure “Fusing Machines”
• High output
2
Armhole and Side Seam Pressing
ASP – Armhole Seam Press
Some formal shirts require a re­ Advantages:
inforcement tape within the armhole • A uniquely designed buck shape
seam. This tape usually has to be adapts to various armhole styles
fused in. Precise pressure and for maximum flexibility
­temperature is a must for this • Separately controlled heat zones
­operation to avoid any delamination guarantee even temperature
during washing. transfer by digital temperature
regulators all over the buck
• Even pressure supply by air
­cushion
• Vacuum function for fast and
simple preparation and quick cool
down after fusing
• Timer-controlled
• Reliable safety system

SSP – Side Seam Press

SSP is designed to press and fuse Advantages:
side seams in one operation. Both • Pressing of both side seams at
side seams of a shirt will be ­processed the same time
at the same time. Even pressure and • Separately controlled heat zones
temperature all over guarantee even temperature
the buck shape is important for a transfer by digital temperature
­homogenous and reliable pressing regulators
and fusing result. • Reliable pressure supply by air
cushion
• Vacuum function for fast and
simple preparation and quick cool
down after fusing
• Timer-controlled
• Reliable safety system

3
Collar and Cuff Pressing
TrioStar Premium
Advantages:
• Perfectly even pressure supply
• Electrically heated
• Separate pressure cylinders for
both the cuffs and the collar
• Adjustable cuff bucks, according
to length of vent facing, no matter
For pressing of collar and cuffs if school shirts, dress shirts or
blouses are pressed
This machine has been designed for • Separate program for short-sleeved
shirts (infants and adults) and shirts
­blouses. A new concept to provide • Integrated vacuum-function
ultimate quality, at high flexibility. • Control unit for temperature,
The cuff buck is adjustable in three ­timing, counter and vacuum
steps, in order to meet the special
requirements of different cuff ­designs. 1 1 Automatic adjustment of heat mat
The flexible top heat mat ­always for the lower buck for totally even
meets the contour of the ­bottom pressure on the whole surface.
buck.
As the pressure is supplied to both 2 Radius with 3 different adjust-
sides of the collar and cuffs, pressure 2 ments for long and short sleeve vent
is equally spread all over the gar- facings.
ment.

VEIT 8905 Basic

Advantages:
• Electrically heated buck shapes
• Also available as steam heated
version
• Suitable for pre-washed or
­moisturized shirts
• Control unit for temperature and
For pressing of collar and cuffs pressing time
• Integrated vacuum-function
• Even pressure supply
Electrically heated collar and cuff • Economical price / performance
press with pneumatically working top ratio
buck. Adjustable temperature and
pressing time. Central pressure
­supply.

4
Pressing Equipment for Fronts and Sleeves
FPD – Front Placket Device
This all-purpose machine can be
used either for fusing or for finishing
front plackets.
• The design of the heating plate is
arranged to avoid temperature
­fluctuations, thus guaranteeing a
­stable temperature
For processing front plackets • Different materials can be pro­
cessed due to the precisely adjust­
able pressure
• Suction makes it easier to position
the garment exactly before ­pressing
and guarantees an optimal cooling
down after pressing
• A clamp for bulk production at the
front of the machine can hold a
number of front plackets in order to
work according to the water fall
principle. It also helps to improve
the workplace design

SFD – Sleeve Finishing Device

This machine provides a good
­pressing result for all kinds of sleeves
due to its variable adjustment
­possibilities.
• Different materials can be pro­cess­
ed due to the precisely adjust­able
pressure
For processing sleeves • The lower pressing buck can be
moved sideways and oscillated.
This guarantees ideal pressing of
all kinds of sleeves without re­
positioning
• A laser pointer shows the exact
­position of the sleeve
• Suction makes it easier to position
the garment exactly before ­pressing
and guarantees an optimal cooling
down after pressing

5
Shirt Finisher / Universal Finisher
VEIT 8319 Basic
The big advantage of this machine is
its universal usability. It is made for
shirts and blouses but can also be
used for finishing sports jackets and
coats.

The pneumatic sleeve tensioners for

For finishing the complete shirt short and long sleeve shirts finish the
sleeves without marks. The powerful
hot air fan provides enough power to
finish shirts very efficiently with good
quality. With the exchangeable lapel
clamps the finisher can be adapted to
your individual needs.

Side vent fixing Advantages:

The automatic side vent fixing device • Optimal forming due to 3-D
is not only used on side vents, but is ­movable tensioning elements
generally used for holding the shirt or • Automatic adjustment of width
smock seams. from XS to XXXL
• Belt drive for a smooth and gentle
movement of the hem clamp
• Precise re-stretching during the
finishing process
• Prevents damage through over­
Automatic height adjustment stretching
Exact height adjustment of the • Integrated re-stretching function
­tensioning unit by Belt-Drive-System prevents wrinkles
controlled by photocell.

The control unit

The control unit is clearly arranged
and easy to handle for controlling the
individual finishing steps. The hand
finisher for touch up is positioned to
allow fast ergonomic access.

6
Shirt Finisher
VEIT 8346 Classic
This high-power finisher is the
­favourite machine for casual shirts
and for shirts with a textured surface
that cannot be pressed. It can also be
used for classic shirts. The spring-
loaded pneumatic sleeve tensioners
for long and short-sleeved shirts
For finishing the complete shirt ­finish the cuffs without leaving marks.
Various garments of different sizes,
shapes and materials can be finished
on this machine efficiently and to the
highest quality standard. An excellent
price/performance ratio results in a
fast amortisation of the VEIT 8346
Shirt Finisher.

The unloading station improves pro-

ductivity and is optionally available.
Up to 100 shirts/h can be finished,
depending on shirts and fabric.
The control unit The adjustable re-stretching function
A clearly arranged display panel ­removes even heavy wrinkles from
shows all the important functions at a the shirts.
glance. Individual steps can be
viewed by push-button. An integrated
counter provides constant ­information Advantages:
about the current output. • The high-performance steam
system of the VEIT 8346 Shirt
Flexible sleeve clamps ­Finisher provides excellent and
Universal use: The Shirt Finisher can reliable results even with short
be switched from short to long sleeve steam phases
tensioning by simply pressing a • The powerful hot-air fan reduces
­button. fixing and drying time and thus
increases productivity
• High-quality components ensure
trouble-free operation and a long
Side vent fixing Retractable lapel clamp life time
The automatic side vent fixing device This construction reduces the height • All parameters can be adjusted
is not only used on side vents, but is of the finisher, making loading and un- exactly to the second on the
generally used for finishing the shirt´s loading of the garments much easier. ­control panel
side seam. This in turn increases productivity and • Easy operation: fast training of
– together with the special form bust operators
with integrated vacuum – guarantees • The productivity can be increased
a consistently high finishing quality. by tandem operation

7
Shirt Body Press / Shirt Finisher
VEIT 8900 Classic
Some manufacturers insist on body
pressing as this part of the shirt is
exposed to the consumer after pack-
ing. As the sleeves are often folded
for bagging, only a finish effect is
necessary to remove the wrinkles.
Veit 8900 is a combination of a shirt
For finishing the complete shirt finisher and a shirt press. Whilst the
body is pressed by two pressing
plates, the sleeves are finished by
steam.

For better access whilst loading and

unloading the shirt onto the dummy,
the front plate moves aside on a rail.
By a collar clamp and a built-in
­vacuum system, the shirt is fixed on
the dummy. Adjustable sleeve clamps
provide an accurate position of the
shirt sleeves, in order to avoid any
impressions after finishing.
The time for pressing as well as the
time for steaming is adjustable on an
easy-to-use touch screen panel. The
length of the shirt is detected auto-
matically.

Advantages:
• Complete finish and pressing of
body and sleeves
• High output of shirts
• Easy to program
• Steam-heated pressing plates

8
Shirt Pressing
TwinStar HP-V3 Body Press Premium
HP-V3 is equipped with two ­dummies.
While one shirt is pressed, the other
one can be loaded by the operator.
Due to an almost fully overlapping
workcycle, efficiency is unbeatable.

The TwinStar HP-V3 Body Press

For pressing the shirt body and TwinStar System
Shirt pressing is a must for all formal
and dress shirts. Customers choice
depends on the right presentation of
a shirt, and this includes the proper
pressing of the body.
The HP-V3 has been a legend ever
since it was built for the first time: a
milestone in shirt body pressing. Due
to high temperature and pressure,
the fabric appears smooth and
­wrinkle-free all over the shirt body.

Touch Screen Programmer

All pressing parameters like pressure,
temperature and time can be set on
the touch screen.
Programs can be saved and activated
at any time.
A piece counter is also included.

600 mm TwinStar Dummy Sizes

550 mm 480 mm
(23.6 inch) (21.6 inch) (18.9 inch) Three different dummies are avail­
able, with which the HP-V3 can be
equipped, depending on size, shape
and fashion of the shirts to be
pressed.

Special Dummy

440 mm 440 mm 350 mm

NEW for Slimline Shirts
also available!
(17.3 inch) (17.3 inch) (13.8 inch)

Please ask your VEIT-Group

Dummy 4.4 Wide Shoulder Dummy 4.4 Standard Shoulder Dummy 3.5 Medium Shoulder re­presentative for details.

9
Shirt Pressing
The shirt is placed on the dummy by Advantages:
the operator. The collar is turned up • Consistent quality
in order to press the entire shirt body • Much faster than hand ironing
up to the collar band. Button and • Better control on production
­buttonhole placket are pressed • No fabric damages through
­separately. Airbags on both sides are ­overheating
inflated to ensure best contact to the • Easy and fast training of
hot plates all over the shirt body. ­operators
Shoulder airbags stretch the shirt • Only small space required
vertically.

Moulded pressing plates adapt to the The entire shirt body is pressed.
dummies. For best pressing results,
airbags are integrated into the
­dummies, so that the entire shirt body
will be exposed to the adjust­able
temperature of the oil-heated press-
ing plates.

Construction of HP-V3 1 Shirts with box pleats can be pressed

1 Moulded pressing plates properly with an added guide for box
2 Airbags for exact pressing, pleats.
finishing of shoulders 2 2

3 Oil-heated pressing plate

10
The TwinStar System
After the body is pressed, the shirt
has to be buttoned, folded and
bagged. All these operations can be
combined within a relatively small
area. VEIT KANNEGIESSER has all the
accessories for a successful work
flow to avoid touching the shirt too
much to prevent impressions.

Automatic Shirt Unloader VEIT KANNEGIESSER H-EN was Advantages:

H-EN ­designed to increase productivity of • H-EN can save one operator for
the HP-V3. After pressing, the shirt is unloading
unloaded automatically. • Time for the shirt to cool down
The H-EN takes the shirt off the • No finger prints on the shirt
­dummy and places it onto the • Increases productivity by up to
­conveyor system (H-TS). 40%
• Small space required
• Transparent work flow

Shirt Transfer Carousel H-TS

Shirt Folding Table/s VEIT 3580, 3600, 3610 H-TS is a conveyor system on which
H-EN the pressed shirts are loaded by
HP-V3
Tagging /
Bagging

H-EN. H-TS is not only a storage

­carousel, but also used for the button­
ing process and for feeding the fold-
ing tables situated next to the carou-
H-TS Buttoning sel. The length of the carousel can be
Unloading ordered individually to meet the
area number of tables needed.

11
Shirt Folding Stations
Maximum flexibility allows folding of men‘s, ladies‘ and children‘s shirts in various styles,
qualities and fabrics.
The height-adjustable folding station with its adjustable accessories, shelves and left or
right operation provides for an ergonomic working place. Special width of the table top
and a button groove permit easy handling and an efficient placement of the shirt.
The folding template can be easily shifted or adjusted (depends on unit model) for ­different
folding sizes.

VEIT Shirt Folding Tables are all equipped with the special Universal Seamless Collar Former
• Automatically adjusting to a wide
range of shirt collar sizes
• Made in one single piece, it shapes
and gives the final form with
­uniform pressure and heat avoiding
marks and without damage to shirt
label as it is free from heat
• A special long metallic band
­guarantees perfect finishing of the
external part of the collar
• Electrically heated; temperature
can be set adequately to the fabric
on a digital controller
• Changing of collar shape easily
possible: round, oval, long oval,
wide oval

VEIT 3580
Manual Shirt Folding Station
• Automatic universal collar former
• Manual operation for the up and
down folding template
• Template according to the required
folding sizes
• Digital temperature control
• Function by standard pedal

12
Shirt Folding Stations
VEIT 3600
Semi-Automatic Shirt Folding Station
• Automatic universal collar former
• Automatic operation for the up and
down folding template in three
steps for an easy folding procedure
and easy unloading of the shirt
­without damage to the collar
shape
• Template according to the required
folding sizes
• Digital temperature control
• Pedal sequencer
• Piece counter
• Cycle select for polo shirts

VEIT 3610
Semi-Automatic Shirt Folding Station with Tuck-In Device
• Automatic universal collar former
• Automatic operation for the up and
down folding template in three
steps for an easy folding procedure
and easy unloading of the shirt
­without damage to the collar
shape
• Easily adjustable template for
­different folding sizes, no storage
of different plates necessary
• Tuck-In Device: to tuck in the shirt’s
tail into the shirt at the end of the
folding process to avoid pins or
clips. This function can be turned
off when not required
• Shoulder system: to block the shirt
Adjustable folding sizes: shoulders in correct position during
Length from 310 mm to 385 mm / the folding process
12.2 up to 15.2 inch • Digital temperature control
Width from 205 mm up to 300 mm / • Pedal sequencer
8.1 to 11.8 inch • Piece counter
• Special cycle for polo shirts
13
Collar & Cuff Pressing
WA – Collar Trimming & Turning Machine KFHP – Blocking Press
Trimming, Turning, Blocking: Collar press for shirts.
With this pneumatically operated Precise pressing of collars at full
­machine it is possible to trim and turn length.
collar points for one and two piece Sharp collar point by using positive
collars. The collar trimming and and negative templates.
­turning machine is a hand-controlled • High productivity
trimming device with pedal-­controlled • Precise pressing result
turning blade.

Special features:
• Optimal collar points after trimming
and turning – important for sharp
collar points
• Suitable for different kinds of ­collars
without knife change
• Also available with additional finger
protection (model WAF with finger
protection)

WAKF – Collar Press with Trimming & Turning Device MFP Cuff Block Press
Trimming, Turning, Blocking: Trimming, Turning, Blocking:
With the collar press, blouse and shirt With this press, different kinds of
collars can be trimmed, turned and cuffs can be pressed to shape, in­
pressed to shape. dependent of sizes.
This is a single head workstation to
Special features: turn and press cuffs to shape. The
• Minimizing of handling time cuff is pressed in two steps: First with
­between trimming, turning and the template, to maintain the shape.
­blocking operations After that without template to avoid
• High flexibility due to quick change impressions. Overlapping operation
of forms between loading and pressing.

Special features:
• Automatic front unloading of
pressed cuffs into a compartment
• Quick change of templates

14
Technical Data
Model Page Length Width Height Weight
mm (inches) mm (inches) mm (inches) kg (Ibs)
Shirt finishers and presses
ASP 3 1180 (46.5) 1310 (51.6) 1580 (62.2) 450 (992)
Armhole Seam Press
SSP 3 1280 (50.4) 1110 (43.3) 1600 (63.0) 450 (992)
Side Seam Press
TrioStar Collar & Cuff Press Premium 4 850 (33.5) 1200 (47.2) 1950 (76.8) 380 (838)
VEIT 8905 4 1100 (43.3) 850 (33.5) 1790 (70.5) – 1890 (74.4) 190 (418.9)
Collar and Cuff Press Basic
FPD 5 1400 (55.1) 1120 (44.1) 1600 (63.0) 420 (926)
Front Placket Device
SFD 5 1350 (53.2) 2540 (100) 1900 (74.8) 460 (1014)
Sleeve Finishing Device
VEIT 8319 Shirt Finisher Basic 6 2150 (84.6) 1530 (60.2) 1720 (67.7) 195 (433)

VEIT 8346 Shirt Finisher Classic 7 2430 (95.7) 1350 (53.1) 2530 (99.6) 290 (639)

VEIT 8900 Shirt Press Classic 8 2200 (86.6) 1441 (56.7) 1820 (71.6) – 1920 (75.6) 630 (1389)

TwinStar HP-V3 Body Press Premium 9 2345 (92.3) 1135 (44.7) 1745 (68.7) 1325 (2915)
Trimming, turning, blocking and creasing
WA – Collar 14 700 (27.6) 520 (20.5) 780 (30.7) 30 (66)
Trimming & Turning Machine
KFHP – Blocking Press 14 700 (27.6) 650 (25.6) 1150 (45.3) 137 (302)
WAKF – Collar Press 14 950 (37.4) 820 (32.3) 1350 (53.2) 165 (364)
with Trimming & Turning Device
MFP 12 700 (27.6) 900 (35.4) 1180 (46.5) 128 (282)
Cuff Block Press
AB-50 17 685 (27.0) 650 (25.6) 1220-1520 (48-60) 100 (221)
Sleeve Vent Creaser
TUP-2 17 780 (30.7) 1000 (39.37) 1200 (47.2) 140 (309)
Pocket Press with 2 Stations
VB-860 17 1250 (49.2) 750 (29.5) 1700-1850 (67-73) 220 (485)
Edge Creaser
Shirt folding tables
VEIT 3580 12 1350 (53.1) 650 (24.6) 880 (34.6)-1080 (42.5) * 80 (176)
Manual Shirt Folding Station 1360 (53.5) **
VEIT 3600 13 1350 (53.1) 650 (24.6) 880 (34.6) – 1080 (42.5) * 80 (176)
Semi-Automatic Shirt Folding Station 1360 (53.5) **
VEIT 3610 13 1600 (63.0) 900 (35.4) 880 (34.6) – 1080 (42.5) * 85 (187)
Semi-Automatic Shirt Folding Station 1500 (59.1) **
*) working height
**) total height

Subject to alterations. All specifications have been made to the best of our knowledge.

15
Technical Data
Model Steam Consump- Working Air Pres- Air Consumption Connected Load Productivity (h)
tion kg/h (lbs/h) sure bar (Ibs) in l/h (cub.ft/h) kW/ Volt/ Hz approx.
Shirt finishers and presses
ASP – 5-6 (80-87) 10800 (381) 2.4 / 230 / 50 180 seams
Armhole Seam Press
SSP – 5-6 (80-87) 10800 (381) 3.6 / 230 / 50 180 seams
Side Seam Press
TrioStar Collar & Cuff Press Premium – 6 (87) 10980 (388) 1.5 / 230/ 50 200 collar/cuffs
VEIT 8905 8-10 (17-22) 1) 0.9 / 230 / 50-60 1)
6 (87) 2160 (76.3) 90 collar/cuffs
Collar and Cuff Press Basic - 2) 3.3 / 400 / 50-60 2)
FPD – 6 (87) 11040 (390) 2.65 / 400/ 50 230 shirts
Front Placket Device
SFD – 6 (87) 4800 (170) 10.05 / 400 / 50 100 shirts
Sleeve Finishing Device
VEIT 8319 Shirt Finisher Basic 30 (66) 6 (87) 400 (14.1) 1 / 230 / 50-60 35 shirts

VEIT 8346 Shirt Finisher Classic 30 (66) 6 (87) 600 (21.2) 2.2 / 400 / 50 50 shirts

VEIT 8900 Shirt Press Classic 30 (66) 6 (87) 2880 (102) 3.65 / 400 / 50-60 60 shirts

TwinStar HP-V3 Body Press Premium – 6.5 (92) 7200 (254) 21.5 / 400 / 50 150 – 300 shirts
Trimming, turning, blocking and creasing
WA – Collar – 4 (57) 180 (6.4) – 380 collars
Trimming & Turning Machine
KFHP – Blocking Press – 6 (87) 1800 (63.6) 2,5 / 230 / 50-60 220 collars
WAKF – Collar Press – 6 (87) 2160 (76.3) 2,5 / 230 / 50-60 180 collars
with Trimming & Turning Device
MFP – 6 (87) 1800 (63.6) 1,2 / 230 / 50-60 320 cuffs
Cuff Blcok Press
AB-50 – 6 (87) 660 (23.3) 1,5 / 230 / 50 360 sleeve vents
Sleeve Vent Creaser
TUP-2 – 6 (87) 1080 (38.1) 1.2 / 230 / 50-60 280 pockets
Pocket Press with 2 Stations
VB-860 – 6 (87) 2160 (76.3) 2 / 230 / 50-60 180 front plackets
Edge Creaser
Shirt folding tables
VEIT 3580 – 5-6 (80-87) 60 (2.1) 0.1 / 200-240 / 50-60 60 shirts
Manual Shirt Folding Station
VEIT 3600 – 5-6 (80-87) 60 (2.1) 0.1 / 200-240 / 50-60 70 shirts
Semi-Automatic Shirt Folding Station
VEIT 3610 – 5-6 (80-87) 60 (2.1) 0.1 / 230-110 / 50 85 shirts
Semi-Automatic Shirt Folding Station
1) Steam heated
2) Electrically heated

16
Edge and Pocket Creasing
AB-50 – Sleeve Vent Creaser TUP-2 – Pocket Press with two Stations
Creasing and pressing of left and The TUP-2 creases all types of
right sleeves vent. Every sleeve vent ­pockets for shirts, blouses, working
is precisely pressed. clothes and trousers.
Thanks to a laser pointer, stripes and The electro-pneumatic workstation is
checks of various fabrics can be equipped with two loading and
processed accurately. ­creasing stations, each individually
controlled. The machine is therefore
Special features: used for overlapping operation with
• Accurate folding of left and right only one operator.
sleeves vent
• Laser pointer for stripes and Special features:
checks • Handling time is considerably
• Height adjustment of the machine ­reduced and quality is improved
stand compared to sewing pockets with­
out edge creasing and to edge
­creasing with irons
• Two different pocket types can be
pressed in overlapping operation
• Pocket forms can be produced
­according to customer’s require-
ments

VB-860 – Edge Creaser

This machine enables the user to With this machine the front placket of
crease the front placket of a shirt a shirt can be produced in two ways:
1
once or twice in one operation. But 1 front placket creased once

not only front plackets can be 2 front placket creased twice

­creased, also, sleeves of short-­ also suitable for creasing other parts
sleeved shirts, pocket tops, etc. like pocket tops, sleeves, etc.
Creasing and pressing at the same Special features:
time. 2 • Different folding methods
Thanks to a laser pointer, striped or • Recommended for stripes and
checked fabric can be placed checks
­accurately. • Height adjustment of the machine
Different placket widths can be set stand
easily.

17
Pressing for Excellence – Why you can rely on the VEIT-Group

For over 50 years, our customers’ requirements and challenges have been our driving force to press for
­excellence. For decades, world famous brands in the German and international garments industry have
placed confidence in the innovative, high quality products and services offered by the VEIT-Group.

Our experts consult and part-

ner with you in finding the best
­possible solution for your project
needs, whether you require in­
dividual machines or a complete
product line.

Prompt delivery and professional

installation of our machines and
systems go hand in hand with

Subject to alterations. All specifications have been made to the best of our knowledge. Printed in Germany. Info No. 23/0310
premium training, through which
we equip your staff with the skills
necessary to achieve the highest
possible production.

Worldwide 24-Hour Service

Hotline
Our service technicians are al-
ways available, around the world
and around the clock, maximizing
continuous production.
We look forward to serving you!

VEIT GmbH BRISAY-Maschinen GmbH VEIT Garment & Textile

Your local sales agent:
Justus-von-Liebig-Str. 15 Mittelweg 4 Technologies GmbH & Co.
D-86899 Landsberg/Lech D-63762 Grossostheim-Ringheim Valdorfer Str. 100
Germany Germany D-32602 Vlotho · Germany
Tel. +49 (8191) 479-0 Tel. +49 (6026) 997-0 Tel. +49 (5733) 87 13-0
Fax +49 (8191) 479-149 Fax +49 (6026) 997-100 Fax +49 (5733) 87 13-45
E-Mail: info@veit.de E-Mail: info@brisay.de E-Mail: info@veit-kannegiesser.de
www.veit-group.com www.brisay.com www.veit-kannegiesser.com