0% found this document useful (0 votes)
89 views2 pages

Additol VXW 6393: Technical Datasheet Liquid Coating Resins and Additives

Uploaded by

Hiba Naser
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
89 views2 pages

Additol VXW 6393: Technical Datasheet Liquid Coating Resins and Additives

Uploaded by

Hiba Naser
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATASHEET Liquid Coating Resins and Additives

ADDITOL VXW 6393


®

TYPE
Defoamer based on mineral spirits to prevent foam, without silicone addition

FORM OF DELIVERY (f.o.d.)


Active substance
approx.100 %

PRODUCT DATA SPECIAL PROPERTIES AND USE


Additol VXW 6393 was designed to destroy foam generated in emulsion
Determined per batch: wall-paints, based on PVAC, PVC, acrylics and their mixed polymers.

Prior to using Additol VXW 6393 it should be thoroughly agitated since it is


Dynamic Viscosity DIN EN ISO 3219 prone to sediment fall out. When examining its rheology it is necessary to
dynamic viscosity [mPa.s] < 250 wait an additional 5 minutes.
(100 1/s; 23 °C)
Additol VXW 6393 can be easily emulsified and worked into the designated
Not continually determined: product.

Colour / Appearance VLN 250


colour whitish PROCESSING
appearance cloudy The foam retarder is generally added undiluted directly to the grind mix. In
some cases it may be an advantage to add 2/3 of the total quantity to the
Density (Liquids) DIN EN ISO 2811-2
grind mix and 1/3 to the emulsion.
density [g/cm³] 0,85
approx. The total recommended dosage is generally 0.1 - 0.5 % on total formulated
(20 °C) solids. In some cases, where especially strong foam generation is observed, a
Flash Point (Pensky-Martens) DIN EN ISO 2719 higher dosage may be necessary; it should, however, not exceed 1 %. The
flash point [°C] > 100 optimum dosage may vary from formulation to formulation.

STORAGE
At temperatures up to 25 °C storage stability packed in original containers
amounts to at least 365 days.
Phase separation may develop, which can easily be remedied by shaking or
agitation.
The product does not freeze at subzero temperatures; it becomes more
viscous. Its effectiveness is not affected.

DISTINGUISHING FEATURES
Additol VXW 6393 is milder in smell as Additol VXW 6392 and has an
advantage in hazard qualification.

www.allnex.com
5.0/17.07.2013 ( replaces all previous versions )
• Worldwide Contact Info: www.allnex.com •
Disclaimer: Allnex Group companies (“Allnex”) decline any liability with respect to the use made by anyone of the information contained herein. The Notice: Trademarks indicated with the ®, ™ or * are
information contained herein represents Allnex's best knowledge thereon without constituting any express or implied guarantee or warranty of any registered, unregistered or pending trademarks of
kind (including, but not limited to, regarding the accuracy, the completeness or relevance of the data set out herein). Nothing contained herein shall be Allnex Belgium SA or its directly or indirectly affiliated
construed as conferring any license or right under any patent or other intellectual property rights of Allnex or of any third party. The information Allnex Group companies.
relating to the products is given for information purposes only. No guarantee or warranty is provided that the product and/or information is adapted for
any specific use, performance or result and that product and/or information do not infringe any Allnex and/or third party intellectual property rights.
The user should perform its own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as
well as the investigation of any possible violation of intellectual property rights of Allnex and/or third parties remains the sole responsibility of the user.
© 2013 Allnex Belgium SA. All Rights Reserved

You might also like