8 D 1,5 CS 8Ω Dual Cone

8” | 260 W Code Z004950

1,5” voice coil Kapton former
Dual Cone
CDR Ferrite Magnet Circuit with Copper Demodulating Ring
95.3 dB sensitivity
Frequency Range 65-15000 Hz

+110 500

+105

200
+100

+95 100

d +90
50
B
+85 Ω
S
P
L +80
20

+75
10

+70

General Specifications +65

5

3
Nominal Diameter 208 mm (8") +60
20 50 100 200 500 1k 2k 5k 10k 20k
Hz

Nominal Impedance 8Ω
Frequency Response on 25 Lt @ 65 Hz Vented Box @ 1W, 1m
Rated Power AES (1) 130 W Free Air Impedance

Continuous Program Power (2) 260 W

(3)
Sensitivity @ 1W/1m 95.3 dB
Voice Coil Diameter 38 mm (1,5") Constructive Characteristics
Voice Coil Winding Depth 10 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.10 T Voice Coil Winding Material Copper
Magnet Weight 1100 g Voice Coil Former Material Kapton
Net Weight 3.1 kg Cone Material Paper

Thiele & Small Parameters (4) Cone Treatment No

Re 6.6 Ω Fs 62.0 Hz Surround Material Treated Cloth

Qms 2.21 Qes 0.35 Dust Dome Material Treated Cloth

Qts 0.30 Mms 16.8 g Mounting Information

Cms 392 µm/N Bxl 11.18 Tm Overall Diameter 208 mm
2
Vas 25.5 l Sd 213.8 cm Baffle Cutout Diameter 184 mm
X max(5) +/-2.5 mm X var (6) +/-4.0 mm Mounting Holes 4 holes 5x8 on ø197 mm
η0 1.69 % Le (1kHz) 0.35 mH Total Depth 88.6 mm

(1) Rated Power measured with 2-hour test with pink noise signal, 6dB crest factor, loudspeaker in free air, power calculated on rated Zmin. (2) Power on Continuous Program is defined as 3dB greater than the Rated Power. (3) Calculated
by Thiele & Small parameters, for SPL average in box refer to frequency response. (4) Thiele & Small parameters measured with laser system after preconditioning test. (5) Measured with respect to a THD of 10%. (6) Value corresponding
to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (7) Drawing dimensions: mm.

SICA Altoparlanti s.r.l. - ITALY – website: www.sica.it ; www.sicaspeakers.com - E-mail: lab@sica.it - Tel. +39-071-7958072 - Fax +39-071-7959006 15/03/2017