Scribd
Upload
39 views4 pages

Subject: Computer Application 3rd Level: Northern Technical University Technical Engineering College/mosul

This document discusses how to insert 2D and 3D screws using Autodesk Mechanical Desktop 2009 (MDT) software. It provides step-by-step instructions for inserting screws in different views, including specifying insertion points, rotation angles, diameters, and lengths. Commands are given for inserting screws in the front, side, top views in 2D as well as using concentric, cylinder, or two edge options for 3D screw insertion. Definitions are also provided for some of the command line options. The overall objective is to use this mechanical design software to insert various mechanical parts for mechanical design analysis and calculations.

Uploaded by

Ahmad Abd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views4 pages

Subject: Computer Application 3rd Level: Northern Technical University Technical Engineering College/mosul

This document discusses how to insert 2D and 3D screws using Autodesk Mechanical Desktop 2009 (MDT) software. It provides step-by-step instructions for inserting screws in different views, including specifying insertion points, rotation angles, diameters, and lengths. Commands are given for inserting screws in the front, side, top views in 2D as well as using concentric, cylinder, or two edge options for 3D screw insertion. Definitions are also provided for some of the command line options. The overall objective is to use this mechanical design software to insert various mechanical parts for mechanical design analysis and calculations.

Uploaded by

Ahmad Abd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Computer Application 3rd level/ MDT Dep.

(Technical Engineering of Power Mechanics) 2020/2021

Northern Technical University


Technical Engineering college/Mosul
Department : Technical engineering of power mechanics
Third Level

Subject: Computer Application 3rd level

Autodesk Mechanical Desktop 2009 (MDT)

Lecturer
Dr. Thamir Aun Al Deen Mohammed
2020/2021

Dr Thamir Aun Al Deen Mohammed Sheet (thamir_own@yahoo.com - thamir_own@ntu.edu.iq ) Page 1


Computer Application 3rd level/ MDT Dep. (Technical Engineering of Power Mechanics) 2020/2021

Autodesk Mechanical Desktop 2009 (MDT)

AutoCAD Mechanical software extends the capabilities of


AutoCAD so that you can quickly create and manage mechanical
drawings.

Autodesk Mechanical Desktop 2009 (MDT) software includes all


the functionality of AutoCAD, plus libraries of standards-based
parts and tools to help accelerate mechanical CAD.

The objective of using Mechanical Desktop design software


package is to insert 2D or 3D mechanical parts (screws, washers,
nuts, shafts, keys, bearings, springs, …etc.). This software is used
in mechanical design analysis and calculations were made after
applying forces on the mechanical parts and inserting the data
needed to perform the calculations.

Dr Thamir Aun Al Deen Mohammed Sheet (thamir_own@yahoo.com - thamir_own@ntu.edu.iq ) Page 2


Computer Application 3rd level/ MDT Dep. (Technical Engineering of Power Mechanics) 2020/2021

Screws
How to draw a 2D or 3D Screw by using Mechanical Desktop?
1- Menu content2D or 3D Fasteners Screws

2- In the command line write AMSCREW2D or AMSCREW3D

After a Screw dialog box appear, select a type of screw and view to insert.

Depending on the selected view there are differences in the insertion process.

Command line options for 2D Screw


Front View/Side View

Specify insertion point: Click a point to specify an insertion point.

Dr Thamir Aun Al Deen Mohammed Sheet (thamir_own@yahoo.com - thamir_own@ntu.edu.iq ) Page 3


Computer Application 3rd level/ MDT Dep. (Technical Engineering of Power Mechanics) 2020/2021

Specify rotation angle <0>: Specify the rotation angle using the pointing device, or
enter a value.

In the Nominal Diameter dialog box, select the size.

Drag size: Specify the length using the pointing device, or enter a value.

Top View

Specify insertion point: Click a point to specify an insertion point.

Specify rotation angle <0>: Specify the rotation angle using the pointing device, or
enter a value.

In the Nominal Diameter dialog box, select the size.

In the Length Selection dialog box, select a length.

Command line options for 3D Screw


Select first point [Concentric/cYlinder/two Edges]: Select a first point or

select the option you want to use to insert the 3D part.

Select second point [Concentric/cYlinder/two Edges]: Select a second point. A dialog


box named for the standard you selected is displayed in which you can select the
nominal diameter for the standard part.

Drag Size [Dialog]: Drag the size by moving the cursor in insertion direction. If you
select Dialog, you choose the part from a table.

Command line definitions


Concentric

Select circular or elliptical edge: Click the edge of


the area where you want to insert the standard part. (1).

Enter an option [Next/Accept] <Accept>: Press ENTER.

Dr Thamir Aun Al Deen Mohammed Sheet (thamir_own@yahoo.com - thamir_own@ntu.edu.iq ) Page 4

You might also like