CCTTC - SK95 Datasheet, Chemical Composition

Carbon tool steel SK95 Mechanical properties, Physical

properties, Mechanical properties, Heat treatment, SK95
Supplier

Carbon tool steel SK95 steel chemical information,mechanical properties, physical properties,
mechanical properties, heat treatment, and Micro structure, We can produce round bars, forged
rings, forged cakes, flat bars, tubes, sheets, plates, steel wires, steel strips, steel coils, etc. The
size can be customized, the maximum order quantity is 100Kg. It also contains the use of
SK95,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other
materials application.

Data Table for Materials Special Alloy Carbon tool steel SK95

SK95 Standard Number

ITEM Standard Number Descriptions

SK95 Chemical composition(mass fraction)(wt.%)

Chemical Min.(%) Max.(%)

C Si Mn P S Cr Ni Mo V Ta
0.90-1.0 0.15-0.3 0.15-0.5 Max Max
0 5 0 0.030 0.030

W N Cu Co Pb B Nb Al Ti Other

SK95 Physical Properties

Tensile strength 115-234 σb/MPa

Yield Strength 23 σ 0.2 ≥/MPa

Elongation 65 δ5≥ (%)

ψ - ψ≥ (%)

Akv - Akv≥/J

HBS 123-321 -

HRC 30 -

SK95 Mechanical Properties

+86-1388-0247-006 Email: sales@ccttc.com https://ccttc.com/ Page 1 / 3

 CCTTC - SK95 Datasheet, Chemical Composition
Carbon tool steel SK95 Mechanical properties, Physical
properties, Mechanical properties, Heat treatment, SK95
Supplier

Tensile strength 231-231 σb/MPa

Yield Strength 154 σ 0.2 ≥/MPa

Elongation 56 δ5≥(%)

ψ - ψ≥(%)

Akv - Akv≥/J

HBS 235-268 -

HRC 30 -

SK95 Heat Treatment Regime

Annealing Quenching Tempering Normalizing Q&T

√ √ √ √ √

SK95 Range of products

Product type Products Dimension Processes Deliver Status

Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling Annealed, Solution
and cold rolling and Aging, Q+T,
ACID-WASHED, Shot
Blasting

Steel Bar Round Bar, Flat Bar, Φ8-1200mm*L Forging, hot rolling Black, Rough
Square Bar and cold rolling, Turning, Shot
Cast Blasting,

Coil / Strip Steel Coil /Steel 0.03-16.0x1200mm Cold-Rolled & Hot- Annealed, Solution
Strip Rolled and Aging, Q+T,
ACID-WASHED, Shot
Blasting

Pipes / Tubes Seamless OD:6-219mm x Hot extrusion, Cold Annealed, Solution

Pipes/Tubes, Welded WT:0.5-20.0mm Drawn, Welded and Aging, Q+T,
Pipes/Tubes ACID-WASHED

We can produce Special Alloy the specifications

follows:
Note:
(1) listed in the table apex diameter (d), to steel thickness (a) multiples said.

+86-1388-0247-006 Email: sales@ccttc.com https://ccttc.com/ Page 2 / 3

 CCTTC - SK95 Datasheet, Chemical Composition
Carbon tool steel SK95 Mechanical properties, Physical
properties, Mechanical properties, Heat treatment, SK95
Supplier

(2) in the ASTM A6 standard specified scope can meet any additional conditions.
(3) from the standard for 50 mm (2 in).
Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d’elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Round bar:
Diameter : 1mm-2000mm
Square bar:
Size: 50mm * 50mm-600mm *600mm
Plate steel/flat bar:
Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe:
Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching +
tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on
the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable
electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's
requirement.
UTS according to SEP 1921 C/c,D/d,E/e;A388 or GB/T 6402
Excellent service for all kinds of industries, with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

+86-1388-0247-006 Email: sales@ccttc.com https://ccttc.com/ Page 3 / 3

Powered by TCPDF (www.tcpdf.org)