Multi-band Bidirectional Antenna 824 – 960/1710 –2170

Vertical Polarization V
Half-power Beam Width 65°

VPol BiDir 824–960/1710–2170 65° 5dBi

Type No. 738 446

Input 1 x N female
Frequency range 824 – 960 MHz, 1710 – 2170 MHz
VSWR < 1.5
Gain 824 – 960 MHz: 5 dBi
1710 – 1880 MHz: 5.5 dBi
1880 – 2170 MHz: 6.5 dBi

372 mm

400 mm
Impedance 50 Ω
Polarization Vertical
Max. power (total) 200 W (at 50 °C ambient temperature)
Weight 0.8 kg
Wind load Frontal: 25 N (at 150 km/h)
Lateral: 65 N (at 150 km/h)
Rearside: 35 N (at 150 km/h)
Max. wind velocity 200 km/h
Packing size 422 x 212 x 95 mm
Height/width/depth 310 / 55 / 190 mm

8.5 mm
Material: Radiator: Tin plated copper.
Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Wall mounting: No additional mounting kit

needed.
For pipe mast mounting use clamps listed on the
datasheet (order separately).

Ice protection: The radiating system is protected by the radome.

Due to its very sturdy construction, the antenna
remains operational even under icy conditions.

Grounding: All metal parts of the antenna as well as the

inner conductor are DC grounded.

10
dB

Typical Horizontal Pattern

140
 Indoor Multi-band Omni Antenna 876 – 960 1710 –2500
Vertical Polarization V

● The antennas need no additional groundplane.

VPol Indoor 876–960/1710–2500 360° 2dBi

∅ 210 mm
Type No. CS7216901
Frequency range 876 – 960 MHz
1710 – 2500 MHz
Polarization Vertical
Gain 2 dBi
Impedance 50 Ω
VSWR 876 – 890 MHz: < 1.8
890 – 960 MHz: < 1.6
1710 – 2170 MHz: < 1.6
2170 – 2500 MHz: < 2.0
Max. power (per band) 50 W (at 50 °C ambient temperature)
Input 1 x N female
Weight 300 g
Diameter 210 mm
Height 78 mm (without connector)

Material: Base: Aluminum.

Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.

Mounting: Three holes in the base enable a mounting on

the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.

Grounding: All metal parts including the inner conductor

are DC grounded.

Available accessories: Broadband power splitters and tappers

(800 – 2500 MHz).
Subject to alteration. P5004 - 80010137

min. dia. 35 mm

N connector, female
dia. 160 mm
3 holes dia. 5 mm
936.2254

Clip the protective housing into position after

the antenna has been mounted with the help
13 mm of the three supplied screws.

Made for Nokia by Kathrein.

 Indoor Multi-band Direct. Antenna 806 – 960 1710 –2500
Vertical Polarization V V
Half-power Beam Width 90° 90°
Integrated Combiner C

VVPol Indoor 806–960/1710–2500 90° 7dBi

Type No. CS7216801
Frequency range 806 – 960 MHz / 1710 – 2500 MHz
Polarization Vertical
Gain ≈ 7 dBi
Half-power beam width Horizontal: ≈ 90°
Impedance 50 Ω
VSWR 806 – 960 MHz: < 2.0
1710 – 2200 MHz: < 2.0
2200 – 2400 MHz: < 2.5
2400 – 2500 MHz: < 2.0
Max. power 50 W (at 50 °C ambient temperature)
Input Cable RG 223/CU of 1m length, white, 806 – 960 1710 – 2500
with N female connector VPol VPol
Protection class IP 30
C
Weight 500 g
Packing size 363 x 152 x 62 mm N
Height/width/depth 231 / 140 / 50 mm

Material: Reflector: Aluminum.

Radome: High impact polystyrol, colour: White.
90°
Additional painting is possible.
Mounting plates: Stainless steel.

Mounting: Two holes of 6 mm diameter in the mounting

10
plate. Screws are not supplied.
Avoid to stress the cable.
dB

Grounding: All metal parts inclusive the inner conductor are 0

DC grounded. Horizontal Pattern

Available accessories: Broadband power splitters and tappers

Subject to alteration. - 80010248 / JUN2006

(800 – 2500 MHz).

Mounting:
936.2525

Mount the attachment plate to the wall Align the antenna over the attachment Pull the antenna to the stop.
using two screws of 4 mm diameter plate.
in the position as indicated.

Made for Nokia by Kathrein.