Series 1, 2, & 3 Pumps Clamp-on or bolt-on available

• Positive Displacement Rotary Vane Pump • Stainless Steel, Brass and Low
• Flow ranging from 15 to 140 gallons per Lead Brass (0.20% Max Lead)
hour at discharge up to 250 psi • Patented Relief Valve Configuration
• Self Priming • Models compatible with 48YZ
• Maintenance Free Frame and 56C Frame Motors
• Low Vibration and Pulsation (Adapter and Coupling required for 56C Frame Mounting)
Characteristics
T YPIC AL
S P E CIFIC AT ION S APPL IC AT IO N S
Body Material Type 303 stainless steel or brass • Carbonation
Capacity 15 to 125 GPH
• Espresso/Coffee
Nominal Speed 1725 RPM
• Welding
Typical Horsepower Required .25 to .50 HP
Maximum Discharge Pressure 250 PSI
• Cold Carb Circulation
Rotation (viewed from nameplate end) Clockwise • Reverse Osmosis
Dry Weight Approximately 2.5 lbs. • Beer Chillers
Dimensions 3.56” x 3.49” x 3.86” • Pesticide Systems
Self Priming (water) 6 ft. Maximum Lift • Solar Applications
Port Size 3/8 NPT Inlet and Outlet

www.proconpump.com
“QUALITY PRODUCTS – DELIVERED ON TIME”
 SERIES 1, 2 & 3 Nominal Volume at 1725 RPM (See note on Series 6)
GALLONS PER HOUR BRAKE HORSEPOWER
FLOW RATE
(GPH) PRESSURE (PSI) PRESSURE (PSI)
50 100 150 200 250 50 100 150 200 250
140 143 141 139 137 135 .17 .28 .40 .52 .63
125 128 126 124 122 120 .16 .26 .36 .47 .57
110 111 109 107 105 103 .15 .25 .34 .44 .54
100 102 100 98 96 94 .13 .20 .28 .35 .42
80 82 80 78 76 74 .12 .18 .25 .32 .39
70 72 70 68 66 64 .11 .17 .24 .30 .37
60 62 60 58 56 54 .10 .16 .23 .29 .35
50 52 50 48 46 44 .09 .15 .21 .27 .33
35 37 35 33 31 29 .08 .14 .19 .24 .29
25 27 25 23 21 19 .07 .12 .17 .22 .27
15 17 15 13 11 - .06 .10 .15 .19 -
ROCON PRODUCTS
 P
Series 1 - 6 Rotary Vane pumps - Model Number Matrix

1 1 1 A 100 F 1 1 A A 180
PRESSURE SETTING (RELIEF VALVE) (SEE NOTE 5)
PRODUCT CLASSIFICATION PRESSURE SETTING IN PSI (POUNDS PER SQ. IN.)
1 - ROTARY VANE PUMP
PRESSURE RANGE (RELIEF VALVE SPRING)
AGENCY APPROVALS A - 151 TO 250 PSI - DEFAULT SETTING 170 PSI (SEE NOTE 4)
0 - NON-FOOD GRADE (1.5% Max. Lead)- NO AGENCY APPROVAL 10 to 17 BAR - DEFAULT SETTING 14 BAR
1 - NSF STD. 169 LISTED (1.5% Max Lead) - (SEE NOTE 1) B - 100 TO 150 PSI - DEFAULT SETTING 130 PSI
2 - WRC 7 TO 10 BAR - DEFAULT SETTING 10 BAR
3 - FOOD GRADE - (1.5% Max. Lead) NO AGENCY LISTING C - 60 TO 99 PSI - DEFAULT SETTING 99 PSI
P- SPARE PARTS KIT 4 TO 7 BAR - DEFAULT SETTING 7 BAR
Z - NON-FOOD GRADE (.20% Max. Lead)- NO AGENCY APPROVAL D - 30 TO 59 PSI - DEFAULT SETTING 50 PSI (SEE NOTE 6)
4 - NSF STD. 169 LISTED (.20% Max. Lead) - (SEE NOTE 1) 2 TO 4 BAR - DEFAULT SETTING 3.5 BAR
Y - NON-FOOD GRADE (.10% Max. Lead)- NO AGENCY APPROVAL X - NO SETTING
5 - NSF STD. 169 LISTED (.10% Max. Lead) - (SEE NOTE 1)
W - 254 SMO (316 S/S) - NO AGENCY APPROVAL VALVE TYPE AND CONFIGURATION
A - PLASTIC, HI TEMP-BYPASS
SERIES B - PLASTIC, HI TEMP-SOLID
1 - SERIES 1 BRASS - INTEGRAL STRAINER C - PLASTIC, HI TEMP BALANCED BYPASS
2 - SERIES 2 BRASS D - PLASTIC, HI TEMP BALANCED SOLID
3 - SERIES 3 STAINLESS STEEL F - PLASTIC, HI TEMP-EXTERNAL ADJUST BYPASS
4 - SERIES 4 BRASS G - PLASTIC, HI TEMP-EXTERNAL ADJUST SOLID
5 - SERIES 5 STAINLESS STEEL P - BRASS, HI TEMP-SOLID
6 - SERIES 6 STAINLESS STEEL R - STAINLESS STEEL, HI TEMP-SOLID
7 - SERIES 7 BRASS MINI PRO 1 - PLASTIC, LOW TEMP-BYPASS
8 - SERIES 8 STAINLESS STEEL - INTEGRAL STRAINER 2 - PLASTIC, LOW TEMP-SOLID
9 - SERIES 9 BRASS SHORT PUMP 3 - PLASTIC, LOW TEMP BALANCED BYPASS
4 - PLASTIC, LOW TEMP BALANCED SOLID
MOUNTING AND DRIVE CONFIGURATION 5 - PLASTIC, LOW TEMP-EXTERNAL ADJUST BYPASS
A - CLAMP ON WITH .188" DOUBLE FLAT DRIVE 6 - PLASTIC, LOW TEMP-EXTERNAL ADJUST SOLID
B - CLAMP ON WITH 1143 BRONZE COUPLING X - NO RELIEF VALVE
C - CLAMP ON WITH 1143-2 PLASTIC COUPLING
D - CLAMP ON WITH SLOTTED SHAFT ONLY - NO COUPLING CLEARANCES
E - BOLT ON WITH SINGLE FLAT DRIVE (SERIES 1-5 ONLY) 1 - STANDARD CLEARANCE
J - BOLT ON WITH .25 DOUBLE FLAT DRIVE (SEE NOTE 2) 2 - SPCL CLEARANCE (1x) LINER & BRGS
K - BOLT ON WITH 3018 BRONZE COUPLING 3 - SPECIAL CLEARANCE (2x) LINER & (1x) BRGS.
L - BOLT ON WITH 3018-1 OVERSIZE BRONZE COUPLING 4 - STANDARD CLEARANCE WITH SEAL CIRCULATION
M - BOLT ON WITH SLOTTED SHAFT ONLY 5 - SPCL CLEARANCE (1x) LINER AND (1x) SEAL CIRC. BRGS.
N - BOLT ON WITH KEY SLOT DRIVE (SERIES 6 ONLY) 6 - SPCL CLEARANCE (1x) LINER AND (2x) SEAL CIRC. BRGS.
P - CLAMP ON WITH 1143-3 OVERSIZE BRONZE COUPLING
R - LONG CLAMP ON WITH DOUBLE FLAT DRIVE ( SEE NOTE 11) ROTATION / SLINGER / PASSIVATION / STRAINER
S - CLAMP ON WITH SINGLE FLAT DRIVE 1 - CLOCKWISE
T - BOLT ON WITH FAEMA STYLE MOUNT 2 - COUNTERCLOCKWISE
3 - CLOCKWISE / SLINGER
FLOWRATE (SEE NOTE 10) 4 - COUNTERCLOCKWISE / SLINGER
SERIES 1, 2 AND 3 7 - CLOCKWISE / COARSE STRAINER
015 - 15 GPH (45 LPH) 8 - CLOCKWISE / SLINGER / COARSE STRAINER
025 - 25 GPH (75 LPH)
035 - 35 GPH (100 LPH) ELASTOMER
050 - 50 GPH (150 LPH) F - FDA GRADE NITRILE - TYPE 21 OR TYPE 2106
060 - 60 GPH (180 LPH) USED INTERCHANGEABLY
070 - 70 GPH (210 LPH) G - ETHYLENE PROPYLENE - TYPE 21 SEAL (SEE NOTE 8)
080 - 80 GPH (240 LPH) R- -FLUOROCARBON - TYPE 21 SEAL
100 - 100 GPH (300 LPH) S - NEOPRENE - TYPE 21 SEAL (SEE NOTE 9)
110 - 110 GPH (HIGH FLOW) (330 LPH) W - ETHYLENE PROPYLENE - TYPE 21 SEAL -
125 - 125 GPH (HIGH FLOW) (375 LPH) WRC APPROVED COMPOUND
140 - 140 GPH (HIGH FLOW) (425 LPH)
NOTES:
SERIES 4 AND 5 1. Brass pumps are NSF listed for potable water only. Stainless steel pumps are NSF
115 - 115 GPH (350 LPH) listed for potable and carbonated water. (Nitrile elastomer only.)
140 - 140 GPH (425 LPH) 2. Bolt on model with .25" double flat drive for use in Japan only. ( No NSF available.)
165 - 165 GPH (500 LPH) 3. Counterclockwise rotation not available for Series 1 pumps.
190 - 190 GPH (575 LPH) 4. For the Beverage Industry - the default relief valve pressure setting is 250 PSI.
215 - 215 GPH (650 LPH) 5. The relief valve pressure setting is not part of the model matrix number. It is for
240 - 240 GPH (725 LPH) customer reference only.
265 - 265 GPH (800 LPH) 6. This pressure range is not available in valve configurations C, D, K or L.
330 - 330 GPH (HIGH FLOW) - NO RELIEF VALVE (1000 LPH) 7. Passivation is defined as a passivated housing only. No other parts are passivated.
8. The EP elastomer is no longer available for Series 6 pumps.
SERIES 6 9. Neoprene elastomer not available for the following relief valve configurations:
300 - 300 GPH - NO RELIEF VALVE (900 LPH) C, D, F, 3, 4, 5, and 6.
360 - 360 GPH - NO RELIEF VALVE (1080 LPH) 10. GPH rating at 60HZ (1750 RPM) - LPH rating at 50HZ (1400 RPM).
420 - 420 GPH - NO RELIEF VALVE (1260 LPH) 11. Long clamp on pumps are series 1 and 4 only
480 - 480 GPH - NO RELIEF VALVE (1440 LPH)
540 - 540 GPH - NO RELIEF VALVE (1620 LPH)
600 - 600 GPH - NO RELIEF VALVE (1800 LPH) Dwg #2033 Rev EE MEA 9-1-09
660 - 660 GPH - NO RELIEF VALVE (2000 LPH)