UD 80 D FREIGHT CARRIER
H11
www.udtrucks.co.za www.facebook.com/udtrucks @udtruckssa info.support@udtrucks.co.za
VEHICLE UD 80 D
Model H11
Model Description Freight Carrier
MASS
Tare mass chassis / cab 4 470 kg
Tare mass on front axle 2 620 kg
Tare mass on rear axle/bogie 1 850 kg
Legal body and payload allowance 9 530 kg
Manufacturer’s gross front axle massload (GA) 5 000 kg
Manufacturer’s gross rear axle / unit massload (GA/GAU) 9 200 kg
Manufacturer’s gross vehicle mass (GVM) 14 000 kg
Manufacturer’s gross combination mass (GCM) 18 000 kg
Max permissible front axle massload (A) 5 000 kg
Max permissible rear axle / unit massload (A/AU) 9 000 kg
Max permissible vehicle mass (V) 14 000 kg
Max permissible drawing vehicle mass (D/T) 18 000 kg
ENGINE
Type FE 6TC
Configuration and number of cylinders Direct injection, turbocharged intercooled in-line 6 cylinder diesel
Displacement 6 925 CM3
Maximum power output 184 kW @ 2 800 r/min
Maximum torque 674 Nm @ 1 800 r/min
Governor type RED electronic (all speed)
CLUTCH
Type Borg & Beck CL 740 350mm single dry plate
Operation Boosted hydraulic with automatic adjustment
Disc diameter 350 mm
Friction area 1 099 cm2
TRANSMISSION
Make UD Trucks MLS 62B
Type 6-speed synchromesh with overdrive top gear
BRAKES
Service brakes Dual circuit air assisted hydraulic drum brakes all-round
Emergency / Parking brake Spring brakes on rear axle
Engine brake Remote mounted exhaust brake with lever switch on steering column
Total brake lining area 4 544 cm2
ABS Standard (on all models produced from Nov 2014)
WHEELS AND TYRES
Rims 7.5x22.5 – 162
Tyres 11R22.5 Regional all round
Spare wheel Slung from a winch type carrier under rear of chassis
FRONT AXLE
Type FA50 drop forged “I” beam with reverse “Elliot” steering knuckles
Suspension Semi-elliptic steel leaf springs with dual acting telescopic shock absorbers
REAR AXLE
Type RS90 single reduction hypoid differential
Suspension Semi-elliptic steel leaf springs with dual acting telescopic shock absorbers
CHASSIS
Type Parallel ladder frame with riveted cross members
Frame section 250 x 80 x 8 mm
STEERING
Type Recirculating ball and screw integral power steering
Ratio 22,42 : 1
Number of turns lock to lock 5.5
November 2014
DIMENSIONS
Wheelbase (WB) 5 300 mm
Overall length (OL) 8 930 mm
Overall width (OW) 2 375 mm
Overall height (OH) 2 715 mm
Frame height unladen - front 970 mm
Frame height unladen - rear 1 080 mm
Ground clearance 240 mm
Track front (FT) 1 935 mm
Track rear 1 800 mm
Overhang front (FO) 1 280 mm
Overhang rear (ROF) (to end of frame) 2 350 mm
Centre of front axle to rear of cab 845 mm
Centre of rear axle to rear of cab (CA) 4 455 mm
Chassis width 860 mm
Cab tilt angle 45 degrees
Turning circle 18 m
Fuel tank capacity 200 litres
ELECTRICAL EQUIPMENT
Alternator Bosch 28 V, 50 A
Starter motor 24 V, 4 kW
Batteries 2 x 12 V, 65 Ah, Code 656
CLEAN AIR SYSTEM
Air cleaner type Donaldson cyclonic with dry paper safety and primary elements, restriction indicator
Air cleaner 330 mm in diameter
CAB
• “Wide” steel/composite forward control suspension tilt cab
• Three windscreen wipers, two speeds plus intermittent setting
• Four external rearview mirrors mounted on cab doors
• Fully adjustable driver’s seat
• Fixed assistant’s and centre seat
• Heater/demister with 4 speed blower
• Steering column adjustable for height and rake
• Cigarette lighter
• Column mounted controls for lights, indicators, windscreen wipers/washers, exhaust brake and horn
• Safety belts: 3 point driver & passenger, lap belt for centre seat
INSTRUMENTS
• Speedometer/ odometer/ tripmeter, rev. counter, fuel gauge, engine temperature gauge, air pressure gauge
• Audio and visual warning devices
MISCELLANEOUS EQUIPMENT
Toolkit, jack, warning triangle, owner’s handbook/service booklet, electric windows, fog lamps.
Air conditioner optional.
PERFORMANCE DATA
Final drive ratio 6.166 : 1
ROAD SPEED @ MAX R/ ROAD SPEED @ MAX GRADEABILITY @ GRADEABILITY @
GEAR GEAR RATIO :1
MIN (KM/H) TORQUE (KM/H) V% D/T %
1 6.718 14 8 38.71 30.11
2 4.031 23 14 23.23 18.07
3 2.303 41 24 13.27 10.32
4 1.433 65 39 8.26 6.42
5 1.000 94 56 5.76 4.48
6 0.740 127 76 4.26 3.32
REVERSE 6.121 15 9 35.27 27.43
Front view Side view CA
UD80DSPEC
OH
FT FO WB ROF
OW OL
Specifications and options may differ depending on each country due to regulations or special requirements.
Dimensions and devices may be changed without prior notice. Please contact your nearest UD Trucks dealer for further details.
UD Trucks South East Africa
