®

Q R N G Series
Model QRNG 350

Parts Manual
Record of Change 104

This manual contains important safety information and must be made

available to all personnel who operate and/or maintain this product.
Carefully read this manual before attempting to operate or perform
maintenance on this compressor.

Fill Out & Return Warranty Registration Card Located Inside

Manual No. 50163-104

August 2010 Edition

 Item 1) the model number, record of change num-
INTRODUCTION ber, & serial number.
This manual provides information for the QRNG Item 2) the exact part number needed. (Do not
Series, Model QRNG 350 natural gas compressor per order by item numbers.)
Record of Change 104.
Item 3) the exact quantity needed.
The Model QRNG 350 natural gas compressor is Item 4) the preferred type of transportation.
an aircooled, two stage, two cylinder, pressure lubri-
cated compressor capable of handling inlet pressures
of -.75 PSIG (15 in. mercury) up to 30 PSIG. A MODEL &
maximum of 400 PSIG discharge pressure can be Record
produced (with proper controls and modifications). It SERIAL NUMBER of
has a 6" low pressure bore, a 3.25" high pressure bore Change No.
x 3.50" stroke and can be run at 400-900 RPM. IDENTIFICATION

TABLE OF CONTENTS
Ordering Replacement Parts ................................ 1
Serial Number Identification ................................. 1
Crankshaft Group .................................................. 2
Crankcase Group ................................................... 3
Bearing Carrier Group ........................................ 4-5 Model & Serial Number
Connecting Rod & Piston Groups Identification Tag
low pressure .................................................... 6-7
high pressure .................................................. 8-9 The serial number identification tag is located on the
handhole plate side of the crankcase. Fill in the
Cylinder & Head Groups ............................... 10-11 numbers from compressor in the corresponding spaces
Head Assemblies ............................................ 12-13 provided here, and reference this page when ordering
replacement parts.
Suction Valve Assembly ..................................... 14
Discharge Valve Assembly ................................. 15
Pneumatic Unloader Assembly .......................... 16
CHANGES
Control Group ...................................................... 17
since previous printing dated February 2009:
Recommended Spare Parts ................................ 18
Gasket Set ............................................................ 18 The compressor sheave was changed from a three-
groove design to a 4-groove design.
Quin-Cip Lubricant .............................................. 18
"O" Ring Kit ......................................................... 18
Decals ................................................................... 18 CAUTION !
Follow all safety precautions outlined in the QRNG Series
Crankcase Lubricant Capacity ........................... 18 instruction manual.

ORDERING WARNING !
REPLACEMENT PARTS Do not operate this compressor without a totally enclosed
belt guard or any other required safety equipment.
All replacement parts are to be ordered through an
authorized Quincy gas application distributor. Insist
on genuine Quincy parts only! Failure to do so
may void warranty.
DANGER !
Air used for breathing or food processing must meet OSHA
1910.134 or FDA 21 CFR 178.3570 regulations. Failure to do
Prompt service can be rendered on repair parts orders so may cause severe injury or death.
if the following information is given:
QRNG 350 Quincy Compressor

50163-104, August 2010 1 3501 Wismann Lane, Quincy IL - 62305-3116

CRANKSHAFT GROUP 110629

Item Part
Number Qty. Number Description
1 1 110221-001 crankshaft assembly
1.1 1 6905-1R crankshaft (N.S.S.; order 110221-001)
1.2 1 2788 bearing cone
1.3 1 40775 bearing cone
1.4 1 110234 orifice, 1/8 npt
1.5 2 2755S pipe plug, 1/4 npt
1.6 1 110705-F17 roll pin, 3/16 x 1.38
2 1 110523X sheave assembly
2.1 1 110523 sheave, 19-1/2", 4G, B sect, CCW (N.S.S.; order 110523X)
2.2 2 110983-N22 hex. screw, 1/2-13 unc x 3.50, grade 8 (@ 90 ft.-lbs.)
2.3 2 116124-N02 square nut, 1/2-13 unc
2.4 2 110428N050 flatwasher, 1/2
3 1 1466 taper key

N.S.S. = Not Sold Separate

@ Indicates torque value (dry threads)
Note: For reversal of compressor rotation refer to QRNG instruction manual.

QRNG 350 Quincy Compressor

50163-104, August 2010 2 3501 Wismann Lane, Quincy IL - 62305-3116

 CRANKCASE GROUP 112047-001
Item Part
Number Qty. Number Description
1 1 6904X crankcase assembly
1.1 1 6904R crankcase
1.2 1 3720 bearing cup
2 1 2057 pipe plug, 1/2 npt
3 * 1383 bearing adjustment shim, .005 steel
4 * 1383A bearing adjustment shim, .007 steel
5 * 1383B bearing adjustment shim, .020 steel
6 * 1383D bearing adjustment shim, .002 steel
7 1 112066-001 bearing adjustment plate assembly
7.1 1 112066 adjustment plate
7.2 1 112048 oil seal
8 4 123478-L14 hex. screw, 3/8-16 unc x 1.25, grade 5 (@ 30 ft.-lbs.)
9 2 1315-1 gasket, inspection plate
10 1 1249-1 inspection plate
11 1 6849-2 inspection plate (with oil filler)
12 12 123478-K12 hex. screw, 5/16-18 unc x 1.00, grade 5 (@ 12 ft.-lbs.)
13 1 111876-2 oil gauge
14 1 5783 breather ball
15 1 5932 drive pin
16 12 110428N031 flatwasher, 5/16
17 1 22749-042 "o"ring, 1/16 wide x 3.38 o.d.
18 1 112033-908 "o"ring, 3/32 wide x .82 o.d.

* Quantity as required
@ Indicates torque value in foot pounds (dry threads)

12
Install seal as shown if positive crankcase pressure exists (factory standard installation).
8 Reverse the seal if negative crankcase pressure exists.
10 16

1.1
9

7.1
14
7.2

17

6
5
4
13 3
1.2
Apply pipe sealant
18 to this pin
15
during installation.

16

12

11

QRNG 350 Quincy Compressor

50163-104, August 2010 3 3501 Wismann Lane, Quincy IL - 62305-3116

BEARING CARRIER GROUP 112042-001

1.11

1.12

1.13

1.14

1.15

1.2
1.1 2
1.3

1.4

1.5

1.6 7

8
1.10 5
1.7

6
1.8
9

1.10

11
1.9
10

QRNG 350 Quincy Compressor

50163-104, August 2010 4 3501 Wismann Lane, Quincy IL - 62305-3116

 BEARING CARRIER GROUP 112042-001

Item Part
Number Qty. Number Description
* 1 1 112043-002 bearing carrier assembly (N.S.S.; order 112043G002)
1.1 1 110812 bearing carrier
1.2 1 22749-152 "o"ring, 3/32 wide x 3.44 o.d.
1.3 1 22749-112 "o"ring, 3/32 wide x .69 o.d.
1.4 1 160002-001 bearing carrier driveshaft
1.5 1 160075-001 driveshaft key
1.6 1 160003 pump gerotor
1.7 1 6285 retaining ring
1.8 1 110813-001 housing
1.9 6 123777-J12 hex. screw, 1/4-20 unc x 1.00, grade 5 (@ 6 ft.-lbs.)
§ 1.10 3 2719 pipe plug, 1/4 npt, hex socket
1.11 1 5489 adjustment screw
1.12 1 22749-011 "o"ring, 1/16 wide x .44 o.d.
1.13 1 124369-P02 jamnut, 9/16-18 unf
1.14 1 1160 spring
1.15 1 112857 needle valve
2 1 5502-1 bearing carrier gasket
3 8 123478-L12 hex. screw, 3/8-16 unc x 1.00, grade 5 (@ 30 ft.-lbs.)
§ 4 1 110822 oil pressure gauge
* 5 1 6679-1 gasket, oil inlet bracket
6 1 110659 oil pickup tube
7 2 123115-06C lockwasher, 3/8
8 2 123478-L11 hex. screw, 3/8-16 unc x .88, grade 5 (@ 25 ft.-lbs.)
9 1 110825 stud
10 1 121160 pipe plug, 1/8 npt

Maintenance Parts
11 1 110814-001 oil filter (6 pack)
160079-001 Oil Pump Repair Kit
includes "o"rings, brg. carrier driveshaft, key, gerotor pump & retaining ring
112043G002 Replacement Bearing Carrier Assembly
includes bearing carrier assembly & bearing carrier gasket

N.S.S. = Not Sold Separate

@ Indicates torque value (dry threads). Tighten multiple bolts, capscrews & hex nuts in a criss-cross or alternating pattern. Bring
each fastener to the recommended torque specification in even increments.
§ Install with Teflon® tape

QRNG 350 Quincy Compressor

50163-104, August 2010 5 3501 Wismann Lane, Quincy IL - 62305-3116

CONNECTING ROD & PISTON GROUP 112050-002
(low pressure)

Be sure to stagger ring gaps !

QRNG 350 Quincy Compressor

50163-104, August 2010 6 3501 Wismann Lane, Quincy IL - 62305-3116

 CONNECTING ROD & PISTON GROUP 112050-002
(low pressure)
Item Part
Number Qty. Number Description
1 1 112051X1 connecting rod assembly (N.S.S.; see maintenance parts)
1.1 1 112051-002 connecting rod assembly (N.S.S.; see maintenance parts)
1.1.1 1 112232X connecting rod assembly
1.1.1.1 1 112058R connecting rod
1.1.1.2 2 1344 connecting rod bolt, 7/16-20 unc x 3.25
1.1.1.3 2 1319 connecting rod bolt washer
1.1.2 2 112234 needle bearing
1.1.3 1 110801-001 orifice
1.2 2 128203-137 retaining ring
1.3 1 110190-019 piston pin
1.4 1 112052 piston
1.5 1 112749 ring spacer
1.6 2 112748 oil ring rail
1.7 1 9146 piston ring
1.8 2 6994 spring
1.9 2 6992 piston ring
2 2 6656 con-rod insert
3 2 124471-M08 locknut, 7/16-20 unf (@ 40 ft.-lbs.)

Maintenance Parts
1 112052-010 piston (.010 oversize)
1 112052-020 piston (.020 oversize)
1 7527A Piston Ring Set
1 5787-010 Piston Ring Set, LP”includes all rings necessary for installing .010 oversize piston
1 5787-020 Piston Ring Set, LP”includes all rings necessary for installing .020 oversize piston
* 1 6656PR connecting rod inserts (1 pair, standard size)
* 1 6656-010PR connecting rod inserts (1 pair, .010 undersize)
112052G001 Piston Assembly (standard)
includes piston, pin, ring set & retaining rings
112052G010 Piston Assembly (.010 oversize)
includes piston, pin ring set & retaining rings
112052G020 Piston Assembly (.020 oversize)
includes piston, pin, ring set & retaining rings
112053G Replacement Connecting Rod Assembly (standard)
includes connecting rod assembly, inserts (pair) & locknuts
112053G010 Replacement Connecting Rod Assembly (.010 undersize)
includes connecting rod assembly, inserts (pair) & locknuts
N.S.S. = Not Sold Separate
@ Indicates torque value (dry threads). Tighten multiple bolts, capscrews & hex nuts in a criss-cross or alternating pattern. Bring
each fastener to the recommended torque specification in even increments.
* One pair required for each connecting rod assembly.

QRNG 350 Quincy Compressor

50163-104, August 2010 7 3501 Wismann Lane, Quincy IL - 62305-3116

CONNECTING ROD & PISTON GROUP 112055-001
(high pressure)

TOP
GROOVE
10

Be sure to stagger ring gaps !

SECOND
GROOVE

10

1.2
1.2
THIRD
7 GROOVE

1.3

BOTTOM
6
GROOVE

1.5

2
1.1 9
4

1.4 2

QRNG 350 Quincy Compressor

50163-104, August 2010 8 3501 Wismann Lane, Quincy IL - 62305-3116

 CONNECTING ROD & PISTON GROUP 112055-001
(high pressure)
Item Part
Number Qty. Number Description
1 1 112056-001 connecting rod assembly (N.S.S.; see maintenance parts)
1.1 1 112058 connecting rod (N.S.S.; see maintenance parts)
1.2 2 112059 needle bearing
1.3 2 1344 connecting rod bolt, 7/16-20 unc x 3.25
1.4 2 1319 connecting rod bolt washer
1.5 1 110801-001 pipe plug orifice
2 2 8649 retaining ring
3 1 110190-020 piston pin
4 1 112057 piston
5 2 112782 oil ring rail
6 1 112783 piston ring
7 1 6997 piston ring
8 2 124471-M08 locknut, 7/16-20 unf (@ 40 ft.-lbs.)
9 2 6656 connecting rod insert (sold in pairs only; see maintenance parts)
10 2 111845 piston ring

Maintenance Parts
1 112057-010 piston (.010 oversize)
1 112057-020 piston (.020 oversize)
1 8168A Ring Set, HP (Standard) No Color Code
includes piston rings, piston rails, piston spring & spacer
1 5788-010 Ring Set, HP (.010 Oversize) (L. Blue)
includes all rings necessary for installing .010 oversize piston
1 5788-020 Ring Set, HP (.020 Oversize) (Yellow)
includes all rings necessary for installing .020 oversize piston
* 1 6656PR connecting rod inserts (1 pair, standard size)
* 1 6656-010PR connecting rod inserts (1 pair, .010 undersize)
112057G001 Piston Assembly (standard)
includes piston, piston pin, ring set & retaining rings
112057G010 Piston Assembly (.010 oversize)
includes piston, piston pin, ring set & retaining rings
112057G020 Piston Assembly (.020 oversize)
includes piston, piston pin, ring set & retaining rings
112058G Replacement Connecting Rod Assembly (standard)
includes connecting rod assembly, inserts & locknuts
112058G010 Replacement Connecting Rod Assembly (.010 undersize)
includes connecting rod assembly, inserts & locknuts

N.S.S. = Not Sold Separate

@ Indicates torque value (dry threads). Tighten multiple bolts, capscrews & hex nuts in a criss-cross or alternating pattern. Bring
each fastener to the recommended torque specification in even increments.
* One pair required for each connecting rod assembly.

QRNG 350 Quincy Compressor

50163-104, August 2010 9 3501 Wismann Lane, Quincy IL - 62305-3116

CYLINDER & HEAD GROUP 115348-003
(plain head)

QRNG 350 Quincy Compressor

50163-104, August 2010 10 3501 Wismann Lane, Quincy IL - 62305-3116

 CYLINDER & HEAD GROUP 115348-011
(head with unlaoders)

QRNG 350 Quincy Compressor

50163-104, August 2010 11 3501 Wismann Lane, Quincy IL - 62305-3116

HEAD ASSEMBLY 115343P-004
(plain head)

QRNG 350 Quincy Compressor

50163-104, August 2010 12 3501 Wismann Lane, Quincy IL - 62305-3116

 HEAD ASSEMBLY 115343UU-005
(head with unloaders)

QRNG 350 Quincy Compressor

50163-104, August 2010 13 3501 Wismann Lane, Quincy IL - 62305-3116

SUCTION VALVE ASSEMBLY 7749X1

QRNG 350 Quincy Compressor

50163-104, August 2010 14 3501 Wismann Lane, Quincy IL - 62305-3116

 DISCHARGE VALVE ASSEMBLY 7750X1

QRNG 350 Quincy Compressor

50163-104, August 2010 15 3501 Wismann Lane, Quincy IL - 62305-3116

PNEUMATIC UNLOADER ASSEMBLY 40055-1

QRNG 350 Quincy Compressor

50163-104, August 2010 16 3501 Wismann Lane, Quincy IL - 62305-3116

 CONTROL GROUP 116269-001

QRNG 350 Quincy Compressor

50163-104, August 2010 17 3501 Wismann Lane, Quincy IL - 62305-3116

 Recommended Spare Parts "O"Ring Kit 110291G
Item Part Item Part
# Qty. Number Description # Qty. Number Description

3 7749X1G replacement suction valve assy. 1 112033-908 "o"ring, 3-1/2 wide x .82 o.d.
3 7750X1G replacement discharge valve assy. 1 112048 oil seal
1 124972-001 differential pressure gauge 1 22749-011 "o"ring, 1/16 wide x .44 o.d.
1 160079-001 oil pump repair kit 1 22749-112 "o"ring, 3/32 wide x .69 o.d.
1 7503G gasket set 1 22749-042 "o"ring, 1/16 wide x 3.38 o.d.
1 22749-152 "o"ring, 3/32 wide x 3.44 o.d.

Gasket Set 7503G

Item
# Qty.
Part
Number Description
DECALS
1 5827-3 gasket, cylinder to crankcase
2 1315-1 gasket, inspection plate
2 7398-1 gasket
3 1383 bearing adj. shim, .005 steel
5 1383A bearing adj. shim, .007 steel
3 1383B bearing adj. shim, .020 steel
2 1383D bearing adj. shim, .002 steel
1 5502-1 gasket, bearing carrier
1 7403-1 gasket
6 2024-001 valve gasket
1 6679-1 oil inlet bracket gasket 2
2 2025-1 valve cover gasket
3
1

QUIN-CIP® LUBRICANT Decals for QRNG 350 Basic Compressor

Refer to the chart below to order QUIN-CIP compres- Item Part
sor lubricant from your local authorized Quincy # Qty. Number Description
distributor. 1 1 110831 serial number & nameplate
2 1 * 127889-A decal, CAUTION!/manual/
Package Part No. Description "Failure to follow..."
3 1 * 127889-B decal, DANGER! /
"Air used for breathing..."
Barrel 112542D068 55 gal., SAE 20 4 1 113387 decal, CAUTION/Do not
Pail 112542P068 5 gal., SAE 20 remove dipstick....
Gallon 112542G068 1 gal., SAE 20 * Not sold separate; order 127889.
Gallon Case 112542X068 (4)-1 gal., SAE 20
Quart 112542Q068 1 qt., SAE 20
Quart Case 112542C068 (12)-1 qt., SAE 20
CRANKCASE LUBRICANT
Barrel 112543D100 55 gal., SAE 30
Pail 112543P100 5 gal., SAE 30 CAPACITY
Gallon 112543G100 1 gal., SAE 30 Model Less Filter With Filter
Gallon Case 112543X100 (4)-1 gal., SAE 30
Quart 112543Q100 1 qt., SAE 30 QRNG 350 43/4 Qts. Add 10 oz.
Quart Case 112543C100 (12)-1 qt., SAE 30

CAUTION !
Refer to the QRNG Series Instruction Manual for vital
lubrication information.

QRNG 350 Quincy Compressor

50163-104, August 2010 18 3501 Wismann Lane, Quincy IL - 62305-3116

 QUINCY COMPRESSOR responsible for loss or damage in transit after having received “In Good
Order” receipt from the carrier. All claims for loss or damage in transit should
STANDARD TERMS AND CONDITIONS be made to the carrier.
TITLE & LIEN RIGHTS: The equipment shall remain personal property,
LEGAL EFFECT: Except as expressly otherwise agreed to in writing by an
regardless of how affixed to any realty or structure. Until the price (including
authorized representative of Seller, the following terms and conditions shall
any notes given therefore) of the equipment has been fully paid in cash, Seller
apply to and form a part of this order and any additional and/or different terms
shall, in the event of Buyer’s default, have the right to repossess such
of Buyer’s purchase order or other form of acceptance are rejected in advance
equipment.
and shall not become a part of this order.
PATENT INFRINGMENT: If properly notified and given an opportunity
The rights of Buyer hereunder shall be neither assignable nor transferable
to do so with friendly assistance, Seller will defend Buyer and the ultimate
except with the written consent of Seller.
user of the equipment from any actual or alleged infringement of any
This order may not be canceled or altered except with the written consent published United States patent by the equipment or any part thereof furnished
of Seller and upon terms which will indemnify Seller against all loss pursuant hereto (other than parts of special design, construction, or manufac-
occasioned thereby. All additional costs incurred by Seller due to changes in ture specified by and originating with Buyer), and will pay all damages and
design or specifications, modification of this order or revision of product must costs awarded by competent court in any suit thus defended or of which it may
be paid for by Buyer. have had notice and opportunity to defend as aforesaid.
In addition to the rights and remedies conferred upon Seller by this order, STANDARD WARRANTY: Seller warrants that products of its own
Seller shall have all rights and remedies conferred at law and in equity and manufacture will be free from defects in workmanship and materials under
shall not be required to proceed with the performance of this order if Buyer normal use and service for the period specified in the product instruction
is in default in the performance of such order or of any other contract or order manual. Warranty for service parts will be Ninety (90) days from date of
with seller. factory shipment. Electric Motors, gasoline and diesel engines, electrical
TERMS OF PAYMENT: Unless otherwise specified in the order acknowl- apparatus and all other accessories, components and parts not manufactured
edgment, the terms of payment shall be 1% 15, net forty-five (45) days after by Seller are warranted only to the extent of the original manufacturer’s
shipment. These terms shall apply to partial as well as complete shipments. warranty.
If any proceeding be initiated by or against Buyer under any bankruptcy or Notice of the alleged defect must be given to the Seller, in writing with all
insolvency law, or in the judgment of Seller the financial condition of Buyer, identifying details including serial number, type of equipment and date of
at the time the equipment is ready for shipment, does not justify the terms of purchase within thirty (30) days of the discovery of the same during the
payment specified, Seller reserves the right to require full payment in cash warranty period.
prior to making shipment. If such payment is not received within fifteen (15)
Seller’s sole obligation on this warranty shall be, at its option, to repair or
days after notification of readiness for shipment, Seller may cancel the order
replace or refund the purchase price of any product or part thereof which
as to any unshipped item and require payment of its reasonable cancellation
proves to be defective. If requested by Seller, such product or part thereof
charges.
must be promptly returned to seller, freight prepaid, for inspection.
If Buyer delays shipment, payments based on date of shipment shall
Seller warrants repaired or replaced parts of its own manufacture against
become due as of the date when ready for shipment. If Buyer delays
defects in materials and workmanship under normal use and service for ninety
completion of manufacture, Seller may elect to require payment according to
(90) days or for the remainder of the warranty on the product being repaired.
percentage of completion. Equipment held for Buyer shall be at Buyer’s risk
and storage charges may be applied at the discretion of Seller. This warranty shall not apply and Seller shall not be responsible or liable
for:
Accounts past due shall bare interest at the highest rate lawful to contract
for but if there is no limit set by law, such interest shall be eighteen percent (a) Consequential, collateral or special losses or damages;
(18%). Buyer shall pay all cost and expenses, including reasonable attorney’s (b) Equipment conditions caused by fair wear and tear, abnormal condi-
fees, incurred in collecting the same, and no claim, except claims within tions of use, accident, neglect or misuse of equipment, improper storage or
Seller’s warranty of material or workmanship, as stated below, will be damage resulting during shipping;
recognized unless delivered in writing to Seller within thirty (30) days after (c)Deviation from operating instructions, specifications or other special
date of shipment. terms of sale;
TAXES: All prices exclude present and future sales, use, occupation, (d) Labor charges, loss or damage resulting from improper operation,
license, excise, and other taxes in respect of manufacture, sales or delivery, all maintenance or repairs made by person(s) other than Seller or Seller’s
of which shall be paid by Buyer unless included in the purchase price at the authorized service station.
proper rate or a proper exemption certificate is furnished. In no event shall Seller be liable for any claims whether arising from breach
ACCEPTANCE: All offers to purchase, quotations and contracts of sales of contract or warranty or claims of negligence or negligent manufacture in
are subject to final acceptance by an authorized representative at Seller’s excess of the purchase price.
plant. THIS WARRANTY IS THE SOLE WARRANTY OF SELLERS AND
DELIVERY: Except as otherwise specified in this quotation, delivery will ANY OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED IN
be F. O. B. point of shipment. In the absence of exact shipping instruction, LAW OR IMPLIED IN FACT, INCLUDING ANY WARRANTIES OF
Seller will use its discretion regarding best means of insured shipment. No MERCHANTABILITY AND FITNESS FOR PARTICULAR USE ARE
liability will be accepted by Seller for so doing. All transportation charges are HEREBY SPECIFICALLY EXCLUDED.
at Buyer’s expense. Time of delivery is an estimate only and is based upon LIABILITY LIMITATIONS: Under no circumstances shall the Seller have
the receipt of all information and necessary approvals. The shipping schedule any liability for liquidated damages or for collateral, consequential or special
shall not be construed to limit seller in making commitments for materials or damages or for loss of profits, or for actual losses or for loss of production or
in fabricating articles under this order in accordance with Seller’s normal and progress of construction, whether resulting from delays in delivery or perfor-
reasonable production schedules. mance, breach of warranty, negligent manufacture or otherwise.
Seller shall in no event be liable for delays caused by fires, acts of God, ENVIROMENTAL AND OSHA REQUIREMENTS: At the time of ship-
strikes, labor difficulties, acts of governmental or military authorities, delays ment of the equipment from the factory, Quincy Compressor / Ortman Fluid
in transportation or procuring materials, or causes of any kind beyond Seller’s Power will comply with the various Federal, State and local laws and
control. No provision for liquidated damages for any cause shall apply under regulations concerning occupational health and safety and pollution. How-
this order. Buyer shall accept delivery within thirty (30) days after receipt of ever, in the installation and operation of the equipment and other matters over
notification of readiness for shipment. Claims for shortages will be deemed which the seller has no control, the Seller assumes no responsibility for
to have been waived if not made in writing with ten (10) days after the receipt compliance with those laws and regulations, whether by the way of indemnity,
of the material in respect of which any such shortage is claimed. Seller is not warranty or otherwise.
QRNG 350 June 30, 2003 Quincy Compressor

50163-104, August 2010 19 3501 Wismann Lane, Quincy IL - 62305-3116

Reciprocating / Systems:
Reciprocating 217.222.7700
Air Master 217.277.0270
E-mail: info@quincycompressor.com
Website: quincycompressor.com