Finishes for Wood Surfaces
PRODUCT CODE 1023, 1025
WoodTech PU Palette Exterior
Asian Paints WoodTech PU Palette Exterior is an acrylic based clear coating, which offers excellent weather
resistance, light-fastness and UV protection.
PRODUCT BENEFITS
Over 115 Shades Superior Resistance
Available in more than 115 shades, including 30 WoodTech PU Palette Exterior has good scratch, stain
metallic shades and 20 translucent shades. and heat resistance. SOLVENT BASED
Exterior Durability
WoodTech PU Palette Exterior has UV Guards, which
make the product excellent for exteriors, also has
high film flexibility, which makes the product resist
cracking even on curved surfaces.
PRODUCT FEATURES
DURABILITY COLOURS AVAILABLE COVERAGE
BEST IN CLASS
As per
Shade Card
HIGH
MEDIUM
LOW
1 COAT
AVAILABLE PACKS FINISH 8 - 9 sq. mtrs./ltr/coat**
On smooth sanded wooden surface by Spraying
MATT SATIN GLOSS HIGH GLOSS
1 ltr 4 ltr after tinting
**Actual coverage may vary from the quoted coverage due
to factors such as method and condition of application and
WoodTech PU Palette Exterior Glossy (1023)- 1 Ltrs & 4 Ltrs.
surface roughness and porosity.
WoodTech PU Palette Primer Surfacer (1025)- 1 Ltrs & 4 Ltrs.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
SANDING: Sand the wooden APPLICATION CODE MIXING RATIO THINNER DILUTION % APPLICATION RECOATING
BASE:HARDENER VISCOSITY PERIOD
surface along the grains using sand STEP 1
paper no. 180, and then 320 or 400. WOODTECH PU PALETTE EXTERIOR PU THINNER SPRAY 17 - 21
1025 90:10 SPRAY 25 - 30 4 - 5 HOURS
Wipe surface to clean off loose dust PRIMER SURFACER WHITE (1532/5442) SECS
FIRST COAT/SPRAY
particles.
STEP 2
INSULATING: (Optional) Apply 1-2 SANDING SAND THE SURFACE WITH SAND PAPER 320 OR 400 AND WIPE CLEAN
coats of WoodTech Epoxy Insulator
STEP 3
to Insulate from Oil & resin from the
WOODTECH PU PALETTE PRIMER PU THINNER SPRAY 17 - 21
wood, also it reduces absorption of a 1025 90:10 SPRAY 25 - 30 4 - 5 HOURS
EXTERIOR SURFACER WHITE (1532/5442) SECS
paint material on Plywood & MDF. SECOND COAT/SPRAY
STEP 4
DENT FILLING: If the surface has SANDING SAND THE SURFACE WITH SAND PAPER 320 OR 400 AND WIPE CLEAN
dents, apply WoodTech Filler with a ( APPLY THIRD COAT IF REQUIRED AFTER SANDING WITH SAND PAPER NO. 320 / 400 AND WIPE CLEAN )
putty knife over the dented area.
STEP 5
WOODTECH PU PALETTE PU THINNER SPRAY 17 - 21 12 -14
EXTERIOR (SHADE) 1023 80:20 SPRAY 25 - 30
(1532/5442) SECS HOURS
FIRST COAT/SPRAY
STEP 6
SANDING SAND THE SURFACE WITH SAND PAPER 320 OR 400 AND WIPE CLEAN
STEP 7
WOODTECH PU PALETTE PU THINNER SPRAY 17 - 21 12 - 14
EXTERIOR (SHADE) 1023 80:20 SPRAY 25 - 30
(1532/5442) SECS HOURS
SECOND COAT/SPRAY
( APPLY THIRD COAT IF REQUIRED AFTER SANDING WITH SAND PAPER NO. 320 / 400 AND WIPE CLEAN )
Note: 1. WoodTech PU Palette Exterior should be thoroughly stirred and 4. WoodTech PU Palette Exterior must not be polluted with oil, varnish or 6. Recoat period is quoted for 30°C and 75% relative humidity, these may
mixed with the hardener and thinner in the specified mixing ratio. the like and must not be sanded with steel wool between coats. vary under different conditions.
2. Maturation time is 30 minutes. 5. If the coating gets physically damaged (cuts and dents) due to impact of 7. Spraying air pressure 2.2 to 2.8 Kgs/sq.cm.
3. If the wood is previously coated, remove the coating by scrapping sharp objects or any other means, after application or in normal usage, then 8. Viscosity as measured through a Ford cup B4 at 30ºC.
before application of WoodTech PU Palette Exterior as per the above the damaged surface has to be repaired by application of fresh coats of
recommended procedure. WoodTech PU Palette Exterior on the specific area.
Finishes for Wood Surfaces
HOW TO CHOOSE COLOURS
Browse through Asian Paints colour tools to help you find the right colour combination
WOODTECH PU PALETTE RAL SHADE CARD WOODTECH PIGMENTED FOLDER
SHADE CARD
The final shade will vary on the basis of the color of the veener, no of coats applied and dilution of the wood stains.
ADDITIONAL INFORMATION
POST PAINTING CARE PRECAUTIONS
For removing stains on tiles and metal > For optimum performance, Asian Paints WoodTech PU Palette Exterior must be applied at a
surfaces, apply NC Thinner on the surface and temperature between 20°C and 40°C and humidity not above 75%.
wipe clean. > Do not over-thin and mix according to recommended ratios.
If stains are difficult to remove, scrapping can > Stir well and strain before use.
be done after applying NC thinner on the
stained area.
Precautions need to be taken while spraying
/ brushing, like masking of adjourning areas
SAFETY FEATURES
with suitable material, as the stains may be
difficult to remove if present on wood or > Kindly refer to the MSDS for Asian Paints WoodTech PU Palette Exterior, which gives detailed
coated wooden and wall surfaces. information on safety measures while handling the paint.
> Store the product at ambient conditions in well ventilated locations and away from source of
ignition and fire.
> Use protective equipment like rubber/polyurathane gloves, safety goggles/glasses, face mask
TECHNICAL DETAILS while handline the paint.
> Avoid eye and skin contact. In both cases wash with soap and plenty of water. Get medical
a. Drying time: Touch to Dry 25 minutes. attention if irritation develops or persists.
Tack Free time 3 hours max > Do not inhale or ingest. In case of inhalation move to fresh air and seek medical attention if
b. Gloss levels: 90% minimum (Glossy) on symptoms persist in both cases.
coated wooden pannel at 60º Gloss Head > Dispose in land filling. Do not dispose in any drain.
c. Flash point (IS 101/1987, Part 1, Sec 6): > No added Lead, Mercury or Chromium compounds.
Above 15ºC (59ºF)
d. Stability of thinned paint: To be used
within 3 hours
e. Shelf Life: 2 year from date of manufacture
in original tightly closed container away from
direct sunlight and extensive heat
Version No. VN28/02/2018
Version No. VN28/02/2018. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services,Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India
