This certificate is granted and awarded by the authority of the Nadcap Management Council to:
Metcut Research Associates Inc.
3980 Rosslyn Dr
Cincinnati, OH 45209-1196
United States
This certificate demonstrates conformance and recognition of accreditation for specific services, as
listed in www.eAuditNet.com on the Qualified Manufacturers List (QML), to the revision in effect at the
time of the audit for:
Materials Testing
Certificate Number: 3511178907
Expiration Date: 31 October 2019 Joseph G. Pinto
Executive Vice President and Chief Operating Officer
Performance Review Institute (PRI) | 161 Thorn Hill Road | Warrendale, PA 15086-7527
SCOPE OF ACCREDITATION
Materials Testing
Metcut Research Associates Inc.
3980 Rosslyn Dr
Cincinnati, OH 45209-1196
This certificate expiration is updated based on periodic audits. The current expiration date and scope
of accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).
In recognition of the successful completion of the PRI evaluation process, accreditation is granted to
this facility to perform the following:
AC7101/1 Rev F - Nadcap Audit Criteria for Materials Testing Laboratories – General
Requirements for All Laboratories (to be used on/after 14 Sept 2014)
AC7101/3 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Mechanical Testing
(to be used on audits on/after 4 December 2016)
(A) Room Temperature Tensile
(B) Elevated Temperature Tensile
(C) Stress Rupture
(O) High Cycle Fatigue
(P) Fracture Toughness
(XA) Creep
(XE) Crack Propagation/Crack Growth Testing
(Y) Low Cycle Fatigue
AC7101/4 Rev F - Nadcap Audit Criteria for Materials Test Laboratories – Metallography and
Microindentation Hardness (to be used on/after 14 August, 2016)
(L0) Metallographic Evaluation
(L1) Microindentation (Interior)
(L11) Grain Size
(L12) Inclusion Rating
(L2) Near Surface Examinations – Alloy Depletion
(L5) Near Surface Examinations – Microindentation (Surface–Case Depth)
(L7) Near Surface Examinations – IGA, IGO
(L8) Near Surface Examinations – Alpha Case: Wrought Titanium
t-frm-17 17-Jun-10
Metcut Research Associates Inc. #2
Cincinnati, OH
(L9) Near Surface Examinations – Alpha Case: Cast Titanium
AC7101/5 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Hardness Testing
(Macro) (to be used on audits on/after 22 March 2015)
(M2) Rockwell Hardness
AC7101/7 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Mechanical Testing
Specimen Preparation (to be used on audits on/after 15 May 2016)
(Z) Standard Specimen Machining
(Z1) Low Stress Grinding
(Z2) Low Stress Grinding and Polishing
(Z3) Cast Specimens
AC7109/5 Rev F - Nadcap Audit Criteria for Coating Evaluations (Laboratory) (Req'd for all
Coatings audits - except suppliers using Nadcap approved AC7109/5 labs) (to be used on
audits on/after 15 April, 2015 and before 3 December 2017)
Bond Strength – Bend
Bond Strength – Tensile
Erosion – Ambient
Hardness – Rockwell
Metallography/Microstructure
Microindentation Hardness – Vickers
Oxidation
Thickness – Metallographic
Lab Type - Lab Type
Independent
t-frm-17 17-Jun-10
