Technical data sheet

100060722
Utilift MF 540 16.06.2014

Pictured machine may include options and additional equipment.

Features
The Utilift MF 540 Scissor Lift with lifting capacity up to 4.5 tonnes and max platform height of 4.5 m is designed to
provide a safe work platform for all kinds of installation works in tunnels up to 6.5 m (21 feet) high.
Typical applications are fan installations, ventilation ducting, electrification works and piping for air and water ser-
vices. Four platform sizes with side shift provide complete drift coverage from single setup practically in all kinds of
mine headings. The works can be accomplished safely, efficiently and comfortably from the level work deck, elevated
to a optimum work height. Optional remote drive system from the deck brings fully new type efficiency into installa-
tion and assembly works in underground mines.
The powerful liquid cooled turbo charged Deutz 120 kW or MB 110 kW TIER 3 approved engine provides clean and ef-
ficient operation and gives maximum speed of 9 km/h in upward inclined 1:7 tunnel. In horizontal tunnel the maximum
speed is 25 km/h.
Vehicle has optional front axle suspension system that improves driving safety and comfort and reduces fatique. The
suspension system reduces vibration from wheels to the cabin and improves handling of the vehicle. The suspension
system gives efficiency and speed to vehicle usage, with safety and comfort for the driver and the passenger.
The new Normet FOPS and ROPS approved safety cabin provides superior visibility and comfortable compartment for
the driver and the passenger. Cabin is designed for safe and easy entry and exit. Door openings are wide and handrails
and non-slip steps are correctly positioned. Dashboard is easy and simple to use. New multifunctional display (MID)
provides driving information (speed, RPM, temperatures etc.) and information can be recorded for analysis. Enclosed
cabin provides noise level < 75 dB ensuring safe and comfort driving.
Vehicle layout allows easy access to all service points, all daily checks can be done from the ground level.
Normet reserves the right to change this specification without further notice.
Normet Oy 1/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Technical specification

LIFTING PLATFORM HYDRAULIC SYSTEM

Dimensions 2000 X 4000 mm Variable displacement pump system,
Lifting capacity 4500 kg 190 bar, 95 L/min/2200 rpm
Max. Lifting height 4500 mm Hydraulic oil tank capacity 115 L
Side shifting 550 mm Return oil filtration 10 μm
Tilt +/-8º Indication of level, filtration and temperature
Diesel start/stop from platform
Battery operated emergency pump 24 VDC ELECTRICAL SYSTEM
Exposed components are min IP 65 standard
ENGINE Battery 2 x 115 Ah
Liquid cooled turbo charged Deutz TCD 2013 L4, Alternator 100 A
120 kW/2300 rpm, TIER 3 approved Driving halogen lights (4 + 2 pcs) 70 W
Halogen work lights (2 + 2 pcs) 70 W
EXHAUST SYSTEM Halogen work lights on lifting platform (4 pcs) 70 W
Catalytic exhaust gas purifier and muffler LED parking, brake and indicator lights
LED side lights; amber
TRANSMISSION Side reversing halogen lights 70 W
Dana 24 000 series power shift with pump drive group Rotating beacon; amber
3 speeds forward and reverse Wire harness (self extinguishing) with tinned wires and water
4-wheel drive tight conduits

AXLES DRIVER’S COMPARTMENT

Planetary type Open 2-man cabin FOPS/ROPS approved
Dana 123 Air suspended driver’s seat
Load end axle fixed Seat with retractable lap seat belt
Engine end axle oscillation +/- 10° Forward and side seating for the driver with two
sets of pedals (brake and accelerator)
TYRES MID 070 S Multifunctional Display with:
• Meters; e.g. speed, RPM, operating hours
12.00 - 20 PR 20
• Status indicators; e.g. fluid levels, temperatures,
pressures, alarms, faults
PERFORMANCE
1st gear max. 6 km/h GREASING SYSTEM
2nd gear 12 km/h
Centralized grease fittings for the carrier
3rd gear 25 km/h
Max. tractive effort 133 kN OTHER
Max speed in 1:7 inclined tunnel 9 km/h
Performance curve 100018584 12 kg hand held fire extinguisher
Standard symbol labels
BRAKES Support legs at the load end
Support legs at the engine end
Service brake: hydraulically powered dual-circuit oil
immersed multidisc brakes in both axles
Safety/Parking brake: spring applied hydraulically
released fail-safe -type brake. Brake testing possible from
cabin

STEERING
Hydraulic frame steering
Orbitrol type
Frame articulation +/- 40°

FUEL TANK
Capacity 112 L

Normet reserves the right to change this specification without further notice.
Normet Oy 2/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Optional equipment Additional equipment

LIFTING PLATFORMS FOR LIFTING PLATFORMS

2400 X 4000: Hydraulic pipe jacks:
• Side shifting 650 mm • Lifting capacity 350 kg
• Lifting capacity 4500 kg • Stroke length 600 mm
• Tilt +/- 8º • Pipe diameter 70 - 273 mm or pipes with a nominal
Turning radius: value from 2½'' to 20''
• Outer 6660 mm Hydraulic pipe jacks with tilt:
• Inner 3700 mm • Lifting capacity 350 kg
2400 X 5200: • Stroke length 450 mm
• Side shifting 650 mm • Tilt +23º...+45º
• Lifting capacity 4000 kg • Pipe outer diameter 70 - 273 mm or pipes with a nomi-
• Tilt +/- 8º nal value from 2½'' to 20''
Turning radius: Crane Hiab 026T:
• Outer 7200 mm • Lifting capacity 12 kNm, 350 kg/3,4 m
• Inner 3700 mm • Max platform capacity with crane 2300 - 3000 kg
• Max platform capacity 2100 kg, with 900 kg rated
DRIVER’S CABIN loading of the crane
Enclosed cabin, FOPS/ROPS • Crane only available with 2400 x 5200 platform
Air suspended T-back seat for driver and passenger Grapple for crane:
• Min. pipe diameter 70 mm
ENGINE • Max. opening 1100 mm
Liquid cooled turbo charged Mercedes-Benz OM 904 LA, • Compressive force 6,4 kN
110 kW/2200 rpm, TIER 3 approved • Radio remote control
1st gear max. 6 km/h • Rotator for grapple
2nd gear 13 km/h Sliding safety roof, (FOPS approved)
3rd gear 25 km/h Fan rack
Max. tractive effort 120 kN
HIGH VOLTAGE ELECTRICAL SYSTEM
Max speed in 1:7 inclined tunnel: 11 km/h
Performance curve 100006272 Electro-hydraulic power pack 15 kW:
Air cooled Deutz D914 L06 86.5 kW/2300 rpm TIER 3 400 V / 50 Hz with 50 m cable and hydr. reel
approved 440 V / 60 Hz with 50 m cable and hydr. reel
Performance curve 100021199 690 V / 50 Hz with 50 m cable and hydr. reel
1000 V / 50 Hz with 50 m cable and hydr. reel
EXHAUST SYSTEM
SUSPENSION
Particle filter for Deutz TCD 2013 L4 120 kW
Front axle suspension
OTHER
LED driving lights (4 + 2 pcs) 18 W FOR ENCLOSED CABIN
LED work lights on cabin (2 + 2 pcs) 43 W CD/Radio system
LED work lights on work platform (4 pcs) 18 W Cabin ventilation:
Warning lights, 1 unit: • Cabin heating
• Rotating beacon; red • Air conditioning
• Rotating beacon; blue

Normet reserves the right to change this specification without further notice.
Normet Oy 3/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Additional equipment LTC services

FIRE SUPPRESSION SYSTEM SPARE PARTS

Fogmaker: Manually actuated Spare parts package A: Available for 1000 h of use*. Include
Fogmaker: Automatically actuated periodical service, most common wearing parts and most
Ansul: Manually actuated critical safety parts.
Ansul: Automatically actuated Spare parts package B: Available for 3000 h of use*. Include
Tempus: Manually actuated periodical service, most common wearing parts and most
GREASING SYSTEM critical safety parts.
Automatic lubrication system for carrier and lifter: Lincoln * Recommendations are based on average hours - can vary a
lot depending on work site conditions.
OTHER
Fast fuel filling system: Wiggins TRAINING SERVICES
Oil evacuation kit with sample points Available before delivery, at start up and after delivery.
Extra hand held fire extinguisher (12 kg) NOTE! after/during Start up / Commissioning as
Warning lights, 1 unit: additional training days these are cheaper.
• Rotating beacon; amber In general training reduces operation costs.
• Rotating beacon; red
• Rotating beacon; blue Product training:
• Strobe light; white Operation and Maintenance
Text labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra / NorSmart
Spa/ Ita Foundation of electrics, hydraulics
Toolbox and maintenance tools and mechanics
2 wheel chocks with brackets Audit
Reversing camera Process training:
Spare wheel with tyre Concrete spraying
Charging
Scaling
Process audit

AUDIT SERVICES
To improve machines performance
To improve your processes performance and quality

SERVICE CONTRACTS
Spare parts supply programmes
Scheduled inspection programmes
Supervision programmes
Periodic maintenance programmes
Machine usage programmes

LINK ONE
Link One electronic spare part manuals

WARRANTY SERVICES
Extended warranty

Normet reserves the right to change this specification without further notice.
Normet Oy 4/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Dimensions

SIDE VIEW
Basic machine with 2000 X 4000 Platform

SIDE VIEW
Machine with options and enclosed cabin

TOP VIEW

Normet reserves the right to change this specification without further notice.
Normet Oy 5/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Dimensions

SIDE VIEW
Machine with 2400X5200 platform

SIDE VIEW
Machine with crane and tiltable pipe lifters

TOP VIEW
With 2400X5200 platform

DIMENSIONS TURNING RADIUS

Length 8700 mm Outer 6550 mm
Width 2000 mm Inner 3900 mm
Height (+/- 100 mm) 2650 mm
Wheel base 3650 mm WEIGHT
Track 1650 mm Operating 12 900 kg
Ground clearance as shown 230 mm

Normet reserves the right to change this specification without further notice.
Normet Oy 6/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Dimensions

TURNING RADIUS
Machine with 2000X4000 platform

TURNING RADIUS
Machine with 2400X4000 platform
Normet reserves the right to change this specification without further notice.
Normet Oy 7/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Dimensions

TURNING RADIUS
Machine with 2400X5200 platform

LIFTING HEIGHT

Normet reserves the right to change this specification without further notice.
Normet Oy 8/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Dimensions

CRANE REACH

Normet reserves the right to change this specification without further notice.
Normet Oy 9/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Tractive efforts

DEUTZ TCD 2013 L4 120 kW

Performance curve 100018584

MERCEDES-BENZ OM 904 LA 110 kW

Performance curve 100006272

Normet reserves the right to change this specification without further notice.
Normet Oy 10/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com
 Technical data sheet
100060722
Utilift MF 540 16.06.2014

Tractive efforts

DEUTZ D914 L6 86,5 kW

Performance curve 100021199

Normet reserves the right to change this specification without further notice.
Normet Oy 11/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND info@normet.com www.normet.com