TECHNICAL DATA SHEET
RENEW™
WIRE ROPE OIL
Each time a wire rope bends or flexes, the strands rub together. In BENEFITS:
addition, the outer strands rub against the sheaves. Renew™
• PROLONGS WIRE ROPE LIFE - readily penetrates to the
Wire Rope Oil protects the strands and sheaves from friction and
core and lubricates internal strands.
wear. This increases wire rope life while decreasing downtime for
changeouts. The final result is more production and less cost. • NONTACKY - eliminates dirt pick up and lubricant sling off.
• EXTREME LOAD-CARRYING ABILITY - extends wire rope
Renew™ Wire Rope Oil is specially formulated to penetrate to the
life and minimizes downtime.
core of the rope. Thus, it lubricates inner rope strands, leaving a
nondrying, nontacky film on the rope exterior.
APPLICATIONS:
Renew™ Wire Rope Oil contains highly efficient extreme pressure Whitmore's Renew™ can be used to lubricate all sizes of wire rope
additives to provide maximum load carrying ability. It also provides as well as chains, leaf springs and other applications where a
excellent corrosion protection. penetrating oil is needed.
Renew™ can be applied automatically or manually as required.
Best results will be obtained if it is applied while the rope passes
over a sheave.
ASTM # TYPICAL CHARACTERISTICS
20 30
D-445 Kinematic Viscosity
cSt @ 40°C 42.7 60.8
cSt @ 100°C 6.7 9.2
D-2161 Saybolt Viscosity
SUS @ 100°F 218 303
SUS @ 210°F 49 57
D-2270 Viscosity Index 111 132
D-97 Pour Point, °F (°C) -25 (-32) -15 (-26)
Gardner Density, lb/gal @ 60°F (15.5°C) 7.54 7.52
Method Specific Gravity, g/cc @ 60°F (15.5°C) 0.905 0.903
D-92 Flash Point, °F (°C) 335 (168) 335 (168)
Cleveland Open Cup
D-92 Fire Point, °/f (°C) 350 (177) 350 (177)
Cleveland Open Cup
D-2782 Timken OK Load, lb 40 40
D-2783 Four Ball EP
Weld Point, kg 250 250
D-4172 Four Ball Wear
Scar Wear, mm @ 40 kgf 0.53 0.58
D-665 Rust Test
Distilled Water Pass Pass
Synthetic Sea Water Pass Pass
D-130 Copper Strip Corrosion 1B 1B
212°F (100°C) @ 3 hr
The above are average values. Minor variations which do not affect product performance are to be expected in normal manufacturing.
PACKAGING
Shuttle Tanks Drums Pails
For warranty information, scan the QR code.
You can also email us at sales@whitmores.com
Or write to the Sales Department at the address below.
930 Whitmore Drive • Rockwall, Texas 75087 • USA • (972) 771-1000 • 800-699-6318
An ISO 9001 and ISO 14001 registered company • www.whitmores.com
TDS-4008 10-26-16 tm/kc