Petrol Gas Analyser Approved
Model : Eco Gas 100
Petrol / CNG / LPG Selection
DC Operation
PC Interface
Leak Check
Petrol Gas Analyser
Multi - Gas Analyser capable of measuring CO, HC, CO2 , O2 & NOx
(optional) contents of Petrol Vehicle / CNG / LPG exhaust. Selectable
functions to measure Lambda & Oil temperature (Optional).
Thermal Printer Soft touch keys Display
Thermal printers print faster and quieter than Step by step test routines can be Independent 7 segment super bright LED display windows for
dot matrix printers. They are also smaller, performed using soft touch displaying CO, HC,CO2 & O2 values. Separate window for
lighter and consume less power. key pad. displaying PEF/RPM/λ/AFR/NOx & Oil temperature values.
Calibration Report Multi Stage Filters
Gas scrubber Condensate filter
Charcoal pre-filter
Multi stage filters prevents dust, water &
impurities contained in the input gas
entering the sensitive gas bench. This
helps in protecting the gas bench
thereby reducing frequent maintenance
and servicing of the gas bench.
Water separator
Pump pre-filter Bench pre-filter
www.manatec.net
Salient Features Technical Specifications
nConforms to ISO 3930 Measurement Parameters Range Resolution
nNDIR technology CO (Carbon Monoxide) 0 - 15% 0.01%
nEngine RPM measurement facility
CO2 (Carbon Dioxide) 0 - 19.9% 0.10%
n7 Segment LED display
HC (Hydro Carbon) 0 - 20000 PPM 1 PPM
nAutomatic condensate discharge
O2 (Oxygen) 0 - 25% 0.01%
nAutomatic zero calibration
nDigital span calibration NOx (Oxides of Nitrogen) 0 - 5000 PPM 1 PPM
nRS232C serial port for PC interface AFR 0 - 30% 0.01%
nNOx measurement (Optional) Lambda 0.20 - 2.00 0.001
nEngine oil temperature measurement (Optional) Engine RPM (Battery based) 400 - 9990 RPM 10 RPM
nPortable light weight design Engine oil temperature 0 - 150º C 1º C
nDC operation suitable for “Road tests”
Operating temperature + 5° to + 45° C
using vehicle battery
nDisplay of Lambda / AFR / PEF Measuring gas intake 3 litres / minute
nPetrol / CNG / LPG selection Leak test Electronic
nIndication for Low / High flow Condensate discharge Automatic
nIndication for battery Low / High voltage Response time < 15 Sec. (for sample probe length of 3m)
nElectronic leak check facility Warm-up time @ 25ºC & above < 3 minutes
Petrol Gas Analyser
nGas scrubber for cleaning of impure particles
Zero & Gas Span calibration Automatic
nHC residue test
Span calibration Digital
Power supply 12V DC ± 2V battery
Calibration 230V AC ± 10%, Single phase, 50-60 Hz
Power 25W
Special Software
Calibration of the gas bench is done by passing sample gas
from a gas canister. All the sensors are automatically
calibrated. Print outs of calibration certificate and calibration
history can be generated.
nPC based operation ensures tamper proof PUC certification by including
photograph of Vehicle number plate in certificate.
nA4 Color printout with Job ID number in certificate as well as on Photo.
nEngine number, Chassis number and Customer data in printout.
nValidity period and Pollution checking centre name in printout.
nPre-printed certificate format settings to meet requirements of various States.
nStoring of Test reports and summaries
➢ Useful for data analysis and report generation viewing / printing.
- Date wise report
- Vehicle number wise report
- Rejected list
- Date wise summary
- Monthly summary
- Yearly summary
- Fee summary
- Summary based on result
www.manatec.net
Standard Accessories
STANDARD
ACCESSORIES Sampling probe assembly : 1 No.
Battery cable (for DC operation) : 1 No.
Inductive pickup & cable assembly : 1 No.
Gas scrubber kit : 1 No.
Petrol Gas Analyser
Optional Accessories
OPTIONAL
ACCESSORIES Universal probe adapter kit for 2/3 wheelers : 1 Set
NOx Sensor : 1 No.
Oil temperature probe : 1 No.
Battery based RPM measurement : 1 No.
Gas test software and PC Interface cable : 1 No.
Thermal printer : 1 No.
* To be ordered along with machine. Field implementation not possible.
www.manatec.net
