The purpose of this guide is to provide the
ECDIS Operator's Guide basic operation for this equipment. For more
detailed information, see the Operator's Manual.
English FMD-3200/FMD-3200-BB/FMD-3300 All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
Controls
The system can be operated with the controls or the trackball module. The procedures in this operator’s guide use the trackball module.
Alert status LED
The color and state of the LED change according to alert status.
- Green, lighting: Normal operation status; no alerts generated.
- Red, flashing: Alert generated (not acknowledged).
- Red, lighting: Alert generated and acknowledged.
A/C RAIN, VRM rotary encoder POWER switch
BRILL knob GAIN knob
A/C SEA knob Adjust active VRM. Turn the system on/off. (This control does not switch the monitor
Rotate: Adjust brilliance of Adjust the gain of
FURUNO monitor. No use. the radar picture. VRM 1: Activate, deactivate VRM1. on/off.)
Push: Select display palette. VRM 2: Activate, deactivate VRM2.
USB port
Connect USB flash memory.
EBL rotary encoder
Adjust active EBL.
EBL 1: Activate, deactivate EBL1. Trackball module
EBL 2: Activate, deactivate EBL2. Operates like a PC mouse.
VIEW/HIDE key
ALARM ACK key Show/hide the Instant
Alert acknowledgement for alerts Access Bar and Route
generated by chart, navigation, etc. Information box.
ACQ key
Activate cursor-selected
sleeping AIS target.
Instant Access knob
Access functions on the Instant TARGET DATA key
Access Bar. Display the detailed
- Rotate: Select item. target data for selected
- Push: Confirm selection. TT, AIS target.
ESC key TARGET CANCEL key
Keyboard MFD key UNDO key RANGE key Sleep cursor-selected
Go back one step in the current
A keyboard for entering Toggle ECDIS and Undo the last operation, when Select the chart AIS target.
sequence. creating a route and user chart. scale.
alphanumeric data. Conning modes.
Display Layout
Status Bar (See page 3.)
Instant Access Bar Chart scale, presentation mode box Cursor position box
(See page 4.) Sensor information box
Upper
section
Own ship functions box
Electronic chart area
Route information box
Overlay/NAV
Tools box
(See page 11.)
Lower
section
Alert box
EBL1 box, Permanent warnings box VRM1 box,
EBL2 box VRM2 box
2
Status Bar
Status Bar
OTHERS: Play back log.
PLAN: Select the Voyage planning mode.
CHARTS: Select the Chart maintenance mode.
NAVI: Select the Voyage navigation mode.
Operating mode: Select the ECDIS mode, ECDIS or Conning.
How to open a drop-down list
Spinner:
Chart format: User settings: Rotates clockwise
Select chart format, - Show the Settings if the system is
vector or raster. menu. working properly.
Click - Manage profiles.
Time: Time (local or UTC)
STD DISP: Display the operator's Date:
Restore IMO standard manual, ECDIS Display the date; select the
display. program no. and time to use, local or UTC.
system information.
CHART ONLY: Chart database:
Drop-down Show only the chart, Select the pre-defined presentations
list when left button is of ENC content:
pressed and held down. IMO BASE, IMO STD or IMO ALL.
3
Instant Access Bar
Upper section (by operating mode) Lower section
Voyage navigation mode Chart maintenance mode
SET: Mini conning:
Select: Show setting Show and hide the mini conning display,
Open route selection menu windows for chart, available in the Voyage navigation a
window to select the route to symbol, user chart.
follow. Planning navigation modes.
Auto Load: TWO DISP:
Unselect: Start automatic installation of the Split screen int two,
Stop following a route. chart data (CD or DVD ROM). horizontally or Chart Legend:
Move to Plan: Manage Charts: vertically. Find data about current chart.
Transfer route to Voyage Manage chart cells (grouping, AIO: Viewing Dates:
MSG: planning mode to edit route. deleting, etc.). Display Admiralty Set “display date” and
Open the AIS/NAVTEX License: Cell Status: Information Overlay. “approved until” dates.
message menu window to Show chart viewing date Show the chart catalog to get info
setup window. Show software Chart 1:
process AIS/NAVTEX about charts installed in the keyboard. Show overview of ECDIS
messages. Route INFO: system. chart symbols.
Find details about route. License:
Show chart viewing date setup
window.
Manual Update: Open the manual update menu window to Public Key:
insert chart update symbols manually. Open public key management
window.
Record buttons:
Voyage planning mode
Record user/position
Report: events to the event log;
See route reports on waypoints access various logs.
and passage plan as well as Select a color palette.
user chart reports.
Route:
Create a route (see page 5).
User Chart: Adjust display brilliance.
Creat a user chart (see page 7).
MOB:
Guide Box: Mark man overboard
A guide box instantly tells the operators the position.
range and bearing between the last waypoint
and the cursor position as you drag the
cursor. Take a screenshot.
Manage Data:
Delete routes and user charts. Undo past action.
4
Routes
How to create a route
Plan Route
PLAN -ning New
Click
WPT5
161.4°
353.3NM
Waypoint
WPT6
WPT1
WPT1 WPT4 Enter
Save as name OK
201.5° 309.0°
Continue adding positions. 2137.2NM 971.4NM Click Click
Right click after inserting
final waypoint; select
[Finish]. WPT2
106.9° WPT3
1748.5NM 25.8°
1470.2NM
Left-click a position to mark a waypoint.
5
Routes (con’t.)
How to select a route to navigate
Select Route Select Route
Name Date Name Date
Route32 12 Aug 2011 Route32 12 Aug 2011
AAAAAA 10 Apr 2011 RouteAAAAAA 10 Apr 2011
Route67 19 Sep 2011 Route67 19 Sep 2011
Selected. To stop navigating a route:
Select a route.
Select [Route]. NAVI Route Unselect
Total WPTs : 42 Total DIST : 7736 NM
Start WPT : 34°37.058’ N Final WPT : 60°10.032’ N
135°13.260’ W 24°56.030’ E
Cancel OK Cancel OK
How to view route waypoint information
Click
Route [Waypoints].
Route INFO
How to delete a route
Manage
PLAN Route Delete
Data
Check route(s)
to delete.
Click
6
User Charts
How to create a user chart
Plan User
PLAN New
-ning Chart
Right click to
open options
How to draw a line How to draw a circle How to draw an area
(3) Click (1) Click
Tidal: - Current (2) Click (2) Click
- Predicted Area
Line: - Coast - Route Circle
- NAV - Depth (4) Right-click;
select [Finish].
(1) Click (3) Right-click; select
Tidal: - NMT Label Drag cursor; [Finish].
- NLT double-click.
Click object to draw.
Save as Enter name OK
Click Click
7
User Charts(con’t)
How to select objects to display in user chart How to link a user chart to a route
DISP SET Symbol Plan
DISP PLAN Route Selected.
-ning
Click [Select.]
Select [Mariner] tab. RouteAAAAAA
Click [User Chart] tab.
Click
Check an item.
Select a user Click
Click chart.
How to delete objects from a user chart
Point, symbol, tidal or circle Point on a line
Edit Edit
Delete DeletePoint
Select [Delete]. Select
[DeletePoint].
Right- click Right- click the point
to delete.
How to delete user charts
PLAN Manage User
Delete
Data Chart
Check chart(s)
to delete. Click
8
Chart Operations
How to control visibility of chart objects
Basic
Setting
Control basic
chart settings
DISP Chart
SET
DISP
Control chart
objects
Symbol
DISP
Control navigational
features
9
Chart Operations
How to set safety contours and chart alerts How to set Display date and Approved until dates
DISP SET Chart Chart Viewing
Approve All
Alert INFO Dates
Set safety
Click to put checkmark;
depths here.
red ( ): Highlight+Warning
yellow ( ): Caution
How to find chart object information (ENC chart)
Ship off center
Object INFO OK
Manual Update
Select [Object INFO.] Select an object.
Right-click
How to manually insert a “new” chart object Select object from
Drawing type.
NAVI Manual
Add Commit
Updates Select [Planning].
Click object to add.
10
TT/AIS Operations
How to find target info
Put the cursor on the target and push the left button to show target data.
Title bar Title bar
TT No. MMSI Scroll
buttons
Bearing
TT symbols (main) Bearing Heading AIS symbols (main)
Range Range
Symbol Course over ground Rate of Symbol Name
Course over ground Name (Color)
(Color) Speed over ground turn
Speed over ground Past position CPA Past position
marker
CPA (Green) marker TCPA (Green)
Bow cross range
TCPA Target under Sleeping AIS
Bow cross time target
acquisition
Bow cross range **.** (Green) (Green)
Position Activated AIS
Bow cross time **.** Acquired
(Green) target Navigation (Green) target
status
How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box
Show, hide AIS display.
Vector
Set vector Select vector (ex. TT)
Show, hide TT display. time. reference.
Set CPA/TCPA alarm.
Set conditions for automatic
activation of AIS targets whose
CPA is within CPA/TCPA setting. (ex. AIS)
Set lost target alarm.
Select reference for
past position display.
Show, hide position
display.
11
TT/AIS Operations (con’t) Radar Overlay
Activate, deactivate the
radar overlay.
Adjust the gain of the radar receiver.
Filter AIS targets Put the cursor on the bar then roll
by target category. the scrollwheel.
Set the degree of transparency for
Filter AIS targets the overlay.
by range and
speed, length.
Set the item to display when a chart
Sleep all activated
object and a radar echo share the
AIS targets.
same position.
Select the antenna to feed
the overlay.
Set conditions to activate an AIS target when
its CPA is within the CPA alarm setting.
Radar echo
Set the conditions
for the AIS lost
target filter.
Set the conditions
for the TT lost
target filter.
PUB. NO. OSE-44730-A
12 (1204, DAMI) FMD-3200/3200-BB/3300
