Section 2

Machine tool probes

 Machine tool probes

Inspection probes for machining centers

MP11
The MP11 is a hard-wired probe ideal for small machine
tools with manual tool changing. The probe is mounted in the
machine spindle with the signal transmission cable connected
to the machine control. With the MP11, the illuminated
LED switches off every time the probe stylus contacts the
workpiece.

Sense directions ±X, ±Y, +Z

X and Y: ±17.5°
Stylus overtravel
Z: 8 mm (0.31 in)
X and Y: 50 gf – 150 gf
Stylus trigger force
Machine tool probes

Z: 180 gf – 700 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

MP11 retrofit kit

Includes: MP11 probe with cable and connectors
2-2 Remote socket kit
50 mm and 100 mm ceramic styli
Renishaw Inspection Plus software MP11 probe
Installation and applications support Includes: MP11 probe with cable and connectors
A shank is not included in this kit. See the section entitled
Shanks and Toolholders for price and part number Part number: A-2045-0001 Price: $3,079
information.

Part number: MP11-NS-S (Available at fixed price) MP11 replacement parts

Call for details
Spare MP11 cable
Note: The retrofit questionnaire at the end of this section
must be filled out and returned to Renishaw before a retrofit
Part number: A-2045-0051 Price: $132
order can be processed.

4 pin connector for MP11 cable

MP11 hardware only kit
Part number: MP11 PLUG KIT Price: $64
Includes: MP11 probe with cable and connectors
Remote socket kit
4 pin socket for MP11
50 mm and 100 mm ceramic styli

A shank is not included in this kit. See the section entitled Part number: P-CN21-0304 Price: $60
Shanks and Toolholders for price and part number
information. Outer diaphragm kit

Part number: MP11-NS-KIT Price: $3,558 Part number: A-2051-7105 Price: $100
MP15
The MP15 probe is used on small CNC machines with limited Z travel and
manual tool changing.

The probe is mounted in the machine spindle with the signal transmission cable
connected to the machine control. With the MP15, the illuminated LED switches
off every time the probe stylus contacts the work piece.

MP15 hard-wired probe kit

Part number: A-2116-1802 Price: $2,114

MP15/MP11 adaptor
Part number: M-2116-1356 Price: $225

Machine tool probes

HSI interface
Part number: A-5500-1000 Price: $198

2-3
 Machine tool probes

MP700
The MP700 is an optical transmission part probing system for
use on machining centers. The MP700 is specifically designed to
deliver high-accuracy CMM type probe performance. The MP700
uses strain gage sensors and and an internal microprocessor to
provide a solid state sensor mechanism with unprecedented life
and reliability. Low trigger force and consistent pre-travel results
in high accuracy with long styli.

The MP700 is available with either 35° or 70° output. An M code

must be supplied to turn the probe on. An internal timer or M
code is used to turn the probe off.

Sense directions ±X, ±Y, +Z

X and Y: ±16.5°
Stylus overtravel
Z: 11 mm (0.45 in)
Machine tool probes

X and Y: 19 gf
Stylus trigger force
Z: 325 gf
Unidirectional repeatability 0.25 µm (0.00001 in)

MP700 retrofit kit MP700 probe

2-4 Includes: MP700 probe with 70° OMP Includes: MP700 probe
OMM Adjusting plate
Receiver mounting bracket 9 V alkaline battery
MI12 interface Tool kit
50 mm and 100 mm carbon fiber styli
Sealtite conduit Part number: A-2107-0035 (35°) Price: $4,564
9 V alkaline battery Part number: A-2107-0070 (70°) Price: $4,564
TK1 tool kit
Renishaw Inspection Plus software MP700 probe module
Installation and applications support
Part number: A-2108-0001 Price: $4,010
A shank is not included in this kit. See the section entitled
Shanks and Toolholders for price and part number information.
MP700 OMP only
Part number: MP700-NS-S (Available at fixed price)
Call for details Part number: A-2107-0036 (35°) Price: $849
Note: The retrofit questionnaire at the end of this section must Part number: A-2107-0071 (70°) Price: $849
be filled out and returned to Renishaw before a retrofit order can
be processed. OMM optical receiver

MP700 hardware only kit Part number: A-2033-0576 Price: $986

Includes: MP700 probe with 70° OMP

Receiver mounting bracket
OMM
Receiver mounting bracket
Part number: A-2033-0830 Price: $119
MI12 interface
50 mm and 100 mm carbon fiber styli
Sealtite conduit
MI12 interface
9 V alkaline battery
Part number: A-2075-0142 Price: $931
TK1 tool kit

A shank is not included in this kit. See the section entitled Sealtite conduit
Shanks and Toolholders for price and part number information.
¼ in conduit, 5 ft long. Includes one fitting.
Part number: MP700-NS-KIT Price: $6,942
Part number: SEALTITE, 7455 Price: $23
OMP40
The OMP40 is an ultra-compact optical transmission part
probing system. Measuring just 40 mm diameter and 50 mm
in length, the OMP40 is suitable for all machining and mill-
turn centers. Utilizing a revised state-of-the-art modulated
optical transmission method, the system offers the highest
level of resistance to light interference when used with
the OMI‑2/OMI‑2T. The OMP40 probe is also backwards
compatible with existing OMM/MI12 and OMI receivers,
enabling current MP7, MP8, MP9 and MP10 system users
to benefit from its innovative features.

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°
Stylus overtravel
Z: 6 mm (0.23 in)
X and Y: 50 gf – 90 gf

Machine tool probes

Stylus trigger force
Z: 585 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

OMP40 retrofit kit

Includes: OMP40 probe
OMM-2 2-5
Receiver mounting bracket
OSI interface OMP40 probe kit
50 mm and 100 mm ceramic styli
Includes: OMP40
Sealtite kit
½ AA battery (2)
Renishaw Inspection Plus software
Tool kit
Installation and applications support
Legacy
A shank is not included in this kit. See section entitled
Shanks and Toolholders for price and part number Part number: A-4071-0001 Price: $3,803
information.
Modulated
Part number: OMP40-NS-S (Available at fixed price)
Call for details Part number: A-4071-2001 Price: $3,803

Note: The retrofit questionnaire at the end of this section

must be filled out and returned to Renishaw before a retrofit OMP40 upgrade kit
order can be processed.
Current users of MP7, MP8, MP9 or MP10 optical
transmission probes may upgrade to OMP40. A complete
OMP40 hardware only kit working system (probe module plus transmission system)
Includes: OMP40 probe must be exchanged.
OMM-2
Includes: OMP40 probe system
Receiver mounting bracket
OSI interface Part number: RI-4071-0001 Price: $1,902
50 mm and 100 mm ceramic styli
Sealtite kit
OMP40 accessories and replacement
Part number: OMP40-NS-KIT Price: $6,126 parts

½AA battery (2 pack)

Part number: P-BT03-0007 Price: $43

OMP60/RMP60 style shank adaptor

Part number: A-4071-0031 Price: $171
 Machine tool probes

OMP40 continued
OMM optical receiver
Part number: A-2033-0576 Price: $986

OMM-2 optical receiver

Part number: A-5492-0051 Price: $986

OMI-2 optical receiver/interface

With 8 m cable.

Part number: A-5191-0049 Price: $1,582

OMI-2 optical receiver/interface

Machine tool probes

With 15 m cable.

Part number: A-5191-0050 Price: $1,664

OMI-2T optical receiver/interface

With 8 m cable.

2-6 Part number: A-5439-0049 Price: $1,582

OMI-2T optical receiver/interface

With 15 m cable.

Part number: A-5439-0050 Price: $1,664

Receiver mounting bracket

Part number: A-2033-0830 Price: $119

MI12 interface
Part number: A-2075-0142 Price: $931

OSI interface
Part number: A-5492-2000 Price: $931

Sealtite conduit for OMM or OMI

¼ in conduit, 5 ft long. Includes one fitting.

Part number: SEALTITE, 7455 Price: $23

Sealtite conduit for OMM-2, OMI-2 or OMI-2T

5/16 in conduit, 1 meter long. Includes one fitting.

Part number: A-4113-0306 Price: $27

OMP400
OMP400 is an ultra-compact optical transmission probe using strain gage
technology. Measuring just 40 mm diameter × 50 mm in length, OMP400 is
suitable for all machining and mill-turn centers requiring uncompromised 3D
metrology performance. Utilizing a revised state-of-the-art modulated optical
transmission method, the system offers the highest level of resistance to light
interference when used with OMI-2. The OMP400 probe is also backwards
compatible with existing OMM/MI12 and OMI receivers, enabling current MP7,
MP8, MP9 and MP10 system users to benefit from its innovative features.

Sense directions ±X, ±Y, +Z

X and Y: ±18°
Stylus overtravel
Z: 11 mm (0.43 in)
X and Y: 6 gf
Stylus trigger force
Z: 260 gf
Unidirectional repeatability 0.25 µm (0.00001 in)

Machine tool probes

OMP400 retrofit kit
Includes: OMP400 probe
OMM-2
Receiver mounting bracket
OSI interface
2-7
50 mm and 100 mm carbon fiber styli
Sealtite kit
Renishaw Inspection Plus software
Installation and applications support

A shank is not included in this kit. See section entitled Shanks

and Toolholders for price and part number information.

Part number: OMP400-NS-S (Available at fixed price)

Call for details OMP400 probe kit
Note: The retrofit questionnaire at the end of this section must Includes: OMP400 probe
be filled out and returned to Renishaw before a retrofit order can ½ AA battery (2)
be processed. Tool kit

Legacy
OMP400 hardware only kit Part number: A-5069-0001 Price: $4,564
Includes: OMP400 probe
OMM-2 Modulated
Receiver mounting bracket Part number: A-5069-2001 Price: $4,564
OSI interface
50 mm and 100 mm carbon fiber styli
Sealtite kit OMP400 upgrade kit
Current users of MP700 optical transmission probes may
Part number: OMP400-NS-KIT Price: $6,954
upgrade to OMP400. A complete working system (probe
module plus transmission system) must be exchanged.
OMM optical receiver
Includes: OMP400 probe
Part number: A-2033-0576 Price: $986
Part number: RI-5069-0001 Price: $2,282
OMM-2 optical receiver
Note: A new shank is required. See section entitled Shanks
Part number: A-5492-0051 Price: $986 and Toolholders for price and part number information.
 Machine tool probes

OMP400 continued
OMI-2 optical receiver/interface
With 8 m cable.

Part number: A-5191-0049 Price: $1,582

OMI-2 optical receiver/interface

With 15 m cable.

Part number: A-5191-0050 Price: $1,664

OMI-2T optical receiver/interface

With 8 m cable.

Part number: A-5439-0049 Price: $1,582

Machine tool probes

OMI-2T optical receiver/interface

With 15 m cable.

Part number: A-5439-0050 Price: $1,664

2-8 Receiver mounting bracket

Part number: A-2033-0830 Price: $119

MI12 interface

Part number: A-2075-0142 Price: $931

OSI interface
Part number: A-5492-2000 Price: $931

Sealtite conduit for OMM or OMI

¼ in conduit, 5 ft long. Includes one fitting.

Part number: SEALTITE, 7455 Price: $23

Sealtite conduit for OMM-2, OMI-2 or OMI-2T

5/16 in conduit, 1 m long. Includes one fitting.

Part number: A-4113-0306 Price: $27

To obtain optimal metrology performance, the following carbon

fiber styli are recommended. Refer to the Styli section for more
details.
Stylus Part number Price
6 × 50 mm CF A-5003-7306 $128
6 × 100 mm CF A-5003-6510 $145
6 × 150 mm CF A-5003-6511 $274
6 × 200 mm CF A-5003-6512 $289
OMP60
OMP60 is an optical transmission probing system suitable
for medium to large machining and mill-turn centers. Utilizing
a revised state-of-the-art modulated optical transmission
method, the system offers the highest level of resistance to light
interference. The OMP60 probe is also backwards compatible with
existing OMM/MI12 and OMI receivers. OMP60 also supports all
methods of probe activation – shank switch, spin and M code –
enabling current MP7, MP8, MP9 and MP10 users to benefit from
some of its innovative features.

Sense directions ±X, ±Y, +Z

X and Y: ±18°
Stylus overtravel
Z: 11 mm (0.43 in)
X and Y: 75 gf – 140 gf
Stylus trigger force
Z: 530 gf

Machine tool probes

Unidirectional repeatability 1.0 µm (0.00004 in)

OMP60 retrofit kit

Includes: OMP60 probe
OMM-2 2-9
Receiver mounting bracket
OSI interface
50 mm and 100 mm ceramic styli
Sealtite kit
Renishaw Inspection Plus software
Installation and applications support

A shank is not included in this kit. See section entitled Shanks

OMP60 probe kit
and Toolholders for price and part number information. Includes: OMP60 probe
AA battery (2)
Part number: OMP60-NS-S (Available at a fixed price)
Tool kit
Call for details
Legacy
Note: The retrofit questionnaire at the end of this section must be
filled out and returned to Renishaw before a retrofit order can be Part number: A-4038-0001 Price: $3,803
processed.
Modulated
OMP60 hardware only kit Part number: A-4038-2001 Price: $3,803

Includes: OMP60 probe

OMM-2 OMP60 upgrade kit
Receiver mounting bracket
OSI interface Current users of MP7, MP8, MP9 or MP10 optical
50 mm and 100 mm ceramic styli transmission probes may upgrade to OMP60. A complete
Sealtite kit working system (probe module plus transmission
system) must be exchanged.
A shank is not included in this kit. See section entitled Shanks
and Toolholders for price and part number information. Includes: OMP60 probe system

Part number: OMP60-NS-KIT Price: $6,126 Part number: RI-4038-0001 Price: $1,902
 Machine tool probes

OMP60 continued
OMM optical receiver

Part number: A-2033-0576 Price: $986

OMM-2 optical receiver

Part number: A-5492-0051 Price: $986

OMI-2 optical receiver/interface

With 8 m cable.

Part number: A-5191-0049 Price: $1,582

OMI-2 optical receiver/interface

Machine tool probes

With 15 m cable.

Part number: A-5191-0050 Price: $1,664

OMI-2T optical receiver/interface

With 8 m cable.
2-10
Part number: A-5439-0049 Price: $1,582

OMI-2T optical receiver/interface

With 15 m cable.

Part number: A-5439-0050 Price: $1,664

Receiver mounting bracket

Part number: A-2033-0830 Price: $119

MI12 interface

Part number: A-2075-0142 Price: $931

OSI interface

Part number: A-5492-2000 Price: $931

Sealtite conduit for OMM or OMI

¼ in conduit, 5 ft long. Includes one fitting.

Part number: SEALTITE, 7455 Price: $23

Sealtite conduit for OMM-2, OMI-2 or OMI-2T

5/16 in conduit, 1 m long. Includes one fitting.

Part number: A-4113-0306 Price: $27

OMP60M
OMP60M is a modular version of the OMP60. The OMP60M,
probe module, adaptors and extensions need to be purchased 7
separately. 6
3 11
8

9
1
4
10

2
5

Machine tool probes

13
12

1 – OMP60M transmission module 14

Part number: A-4038-1003 Price: $1,170

2-11
2 – OMP60M probe module 15

Part number: A-4038-1002 Price: $3,056

3 – OMP60M 100 mm extension

Part number: A-4038-1010 Price: $618 11 – LP2 probe assembly

Part number: A-2063-6098 Price: $2,961

4 – OMP60M 150 mm extension

Part number: A-4038-1027 Price: $801 12 – OMP60M 3-way adaptor

Part number: A-4113-0784 Price: $1,248

5 – OMP60M 200 mm extension

Part number: A-4038-1028 Price: $832 13 – OMP60M probe module adaptor

Part number: A-4113-0771 Price: $707

6 – OMP60M LP2 adaptor

Part number: A-4038-0212 Price: $618 14 – MP3 probe

Part number: A-2053-5358 Price: $3,098

7 – LPE3 150 mm extension

Part number: A-2063-7003 Price: $285 15 – Shorting cover

Part number: A-2053-6468 Price: $137

8 – LPE2 100 mm extension

Part number: A-2063-7002 Price: $285 OMP60M upgrade kit

Current users of MP7, MP8, MP9 or MP10 optical
9 – LPE1 50 mm extension
transmission probes may upgrade to OMP60M. A
Part number: A-2063-7001 Price: $285 complete working probe must be exchanged.

Includes: OMP60M module

10 – MA4 90° adaptor OMP60M probe module

Part number: A-2063-7600 Price: $464 Part number: RI-4038-1003 Price: $2,422
 Machine tool probes

RMP40
RMP40 is an ultra-compact radio transmission part probe, ideal
for use on small to medium machining centers. RMP40 features
an integrated probe module delivering exceptional robustness and
generous overtravel. RMP40 complies with FCC regulations and
operates in the 2.4 GHz range. RMP40 delivers interference-free
transmission through the use of FHSS (frequency hopping spread
spectrum).

RMP40 supports two methods of probe activation:

Radio-on The probe is turned on via an RF signal produced

by the RMI and initiated by an M code. The probe is
turned off via an RF signal or the internal timer.

Spin-on The probe is turned on via an internal centrifugal

switch. The probe is turned off via the centrifugal
switch or the internal timer.
Machine tool probes

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°
Stylus overtravel
Z: 6 mm (0.24 in)
X and Y: 50 gf – 90 gf
Stylus trigger force
Z: 585 gf
2-12
Unidirectional repeatability 1.0 µm (0.00004 in)

RMP40 retrofit kit RMP40 probe kit

Includes: RMP40 probe and transmission system Includes: RMP40 probe
RMI radio machine interface ½AA battery (2)
Receiver mounting bracket Tool kit
50 mm and 100 mm ceramic styli
Sealtite kit Part number: A-5480-0001 Price: $5,120
Renishaw Inspection Plus software
Installation and applications support
RMI radio machine interface
A shank is not included in this kit. See section entitled Shanks
and Toolholders for price and part number information.
Part number: A-4113-0050 Price: $2,559

Part number: RMP40-NS-S (Available at a fixed price) Receiver mounting bracket

Call for details
Part number: A-2033-0830 Price: $119
Note: The retrofit questionnaire at the end of this section must be
filled out and returned to Renishaw before a retrofit order can be
processed. Sealtite conduit
5/16 in conduit, 1 m long. Includes one fitting.
RMP40 hardware only kit
Part number: A-4113-0306 Price: $27
Includes: RMP40 probe and transmission system
RMI radio machine interface
Receiver mounting bracket
50 mm and 100 mm ceramic styli
Sealtite kit

Part number: RMP40-NS-KIT Price: $8,085

RMP60
RMP60 is a radio transmission part probing system ideal for use on all
machine tools. RMP60 features an integrated probe module delivering
exceptional robustness and generous overtravel. RMP60 complies with
FCC regulations and operates in the 2.4 GHz range. RMP60 delivers
interference-free transmission through the use of FHSS (frequency
hopping spread spectrum).

RMP60 supports three methods of probe activation:

Radio-on The probe is turned on via an RF signal produced by the RMI

and initiated by an M code. The probe is turned off via an RF
signal or the internal timer.

Spin-on The probe is turned on via an internal centrifugal switch. The

probe is turned off via the centrifugal switch or the internal
timer.

Machine tool probes

Switch-on The probe is turned on and off via a switch incorporated
into the shank, activated when the probe is loaded into the
spindle.

Sense directions ±X, ±Y, +Z

X and Y: ±18°
Stylus overtravel
Z: 11 mm (0.43 in)
RMP60 probe kit 2-13
X and Y: 75 gf – 140 gf
Stylus trigger force Includes: RMP60 probe
Z: 530 gf
AA battery (2)
Unidirectional repeatability 1.0 µm (0.00004 in)
Tool kit

Part number: A-4113-0001 Price: $5,120

RMP60 retrofit kit
Includes: RMP60 probe and transmission system RMI radio machine interface
RMI radio machine interface
Part number: A-4113-0050 Price: $2,559
Receiver mounting bracket
50 mm and 100 mm ceramic styli
Receiver mounting bracket
Sealtite kit
Renishaw Inspection Plus software Part number: A-2033-0830 Price: $119
Installation and applications support

A shank is not included in this kit. See section entitled Shanks and Sealtite conduit
Toolholders for price and part number information.
5/16 in conduit, 1 m long. Includes one fitting.
Part number: RMP60-NS-S (Available at a fixed price)
Part number: A-4113-0306 Price: $27
Call for details
Note: The retrofit questionnaire at the end of this section must be filled RMP60 upgrade kit
out and returned to Renishaw before a retrofit order can be processed.
Current users of MP14, MP16 or MP18 radio probes
may upgrade to RMP60. A complete working system
RMP60 hardware only kit (MP3 probe, transmission system, MI14 or MI16
interface and RMM antennas) must be exchanged.
Includes: RMP60 probe and transmission system
RMI radio machine interface Includes: RMP60 probe
Receiver mounting bracket RMI radio machine interface
50 mm and 100 mm ceramic styli Receiver mounting bracket
Sealtite kit Sealtite kit

Part number: RMP60-NS-KIT Price: $8,085 Part number: RI-4113-0001 Price: $5,200
 Machine tool probes

RMP60M
RMP60M is a modular version of the RMP60. 7
The RMP60M, probe module, adaptors and 6
3 11
extensions need to be purchased separately. 8
RMP60 complies with FCC regulations and
9
operates in the 2.4 GHz range.
4
10

1 2
5

13
12
Machine tool probes

14
1 – RMP60M transmission module

Part number: A-4113-1003 Price: $2,499

15
2-14
2 – RMP60M probe module

Part number: A-4038-1002 Price: $3,056

11 – LP2 probe assembly

3 – RMP60M 100 mm extension Part number: A-2063-6098 Price: $2,961

Part number: A-4038-1010 Price: $618
12 – RMP60M 3-way adaptor
4 – RMP60M 150 mm extension Part number: A-4113-0784 Price: $1,248
Part number: A-4038-1027 Price: $801
13 – RMP60M probe module adaptor
5 – RMP60M 200 mm extension Part number: A-4113-0771 Price: $707
Part number: A-4038-1028 Price: $832
14 – MP3 probe
6 – RMP60M LP2 adaptor Part number: A-2053-5358 Price: $3,098
Part number: A-4038-0212 Price: $618
15 – Shorting cover
7 – LPE3 150 mm extension Part number: A-2053-6468 Price: $137
Part number: A-2063-7003 Price: $285
RMP60M upgrade kit
8 – LPE2 100 mm extension Current users of MP14, MP16 or MP18 radio probes may
upgrade to RMP60M. A complete working system (probe, MI14
Part number: A-2063-7002 Price: $285
or MI16 interface and RMM antennas) must be exchanged.

9 – LPE1 50 mm extension Includes: RMP60M module

RMP60M probe module
Part number: A-2063-7001 Price: $285 RMI radio machine interface
Receiver mounting bracket
10 – MA4 90° adaptor Sealtite kit

Part number: A-2063-7600 Price: $464 Part number: RI-4113-1003 Price: $5,720
RMP600
RMP600 is a radio transmission probe using strain gage technology.
Measuring only 63 mm in diameter and 76 mm in length, with an
omni-directional transmission distance of 15 m, it is ideal for use on all
machine tools. RMP600 features an integrated probe module delivering
exceptional robustness and generous overtravel. It delivers interference-
free transmission through the use of FHSS (frequency hopping spread
spectrum). RMP600 complies with FCC regulations and operates in the
2.4 GHz range.

RMP600 supports three methods of probe activation:

Radio-on The probe is turned on via an RF signal produced by the RMI

and initiated by an M code. The probe is turned off via an RF
signal or the internal timer.

Spin-on The probe is turned on via an internal centrifugal switch. The

probe is turned off via the centrifugal switch or the internal

Machine tool probes

timer.

Switch-on The probe is turned on and off via a switch incorporated

into the shank, activated when the probe is loaded into the
spindle.

Sense directions ±X, ±Y, +Z

2-15
X and Y: ±15°
Stylus overtravel
Z: 11 mm (0.43 in)
RMP600 probe kit
X and Y: 20 gf
Stylus trigger force Includes: RMP600 probe
Z: 193 gf
AA battery (2)
Unidirectional repeatability 0.25 µm (0.00001 in)
Tool kit

Part number: A-5312-0001 Price: $7,000

RMP600 retrofit kit
Includes: RMP600 probe
RMI radio machine interface
RMI radio machine interface
Part number: A-4113-0050 Price: $2,559
Receiver mounting bracket
50 mm and 100 mm carbon fiber styli
Receiver mounting bracket
Sealtite kit
Renishaw Inspection Plus software Part number: A-2033-0830 Price: $119
Installation and application support

A shank is not included in this kit. See section entitled Shanks and Sealtite conduit
Toolholders for price and part number information.
5/16 in conduit, 1 m long. Includes one fitting.
Part number: RMP600-NS-S (Available at a fixed price)
Part number: A-4113-0306 Price: $27
Call for details
Note: The retrofit questionnaire at the end of this section must be filled RMP600 upgrade kit
out and returned to Renishaw before a retrofit order can be processed.
Current users of MP14, MP16 or MP18 radio probes
may upgrade to RMP600. A complete working system
RMP600 hardware only kit (MP3 probe, transmission system, MI14 or MI16
interface and RMM antennas) must be exchanged.
Includes: RMP600 probe
RMI radio machine interface Includes: RMP600 probe
Receiver mounting bracket RMI radio machine interface
50 mm and 100 mm carbon fiber styli Receiver mounting bracket
Sealtite kit Sealtite kit

Part number: RMP600-NS-KIT Price: $10,032 Part number: RI-5312-0001 Price: $6,440
 Machine tool probes

Shanks and Toolholders Shanks for OMP40, OMP400 and RMP40

Part number Description Price

Shanks for OMP60, MP11, MP700, M-4071-0050 CAT30 $413

RMP60 and RMP600 (spin-on, M-4071-0058 CAT40 $368
M-4071-0072 CAT50 $368
optical-on, radio-on) systems
M-4071-0049 BT30 $425
Part number Description Price M-4071-0057 BT40 $368
M-4071-0071 BT50 $368
M-2045-0068 CAT30 $368
M-4071-0048 ISO30 DIN69871 $413
M-2045-0069 CAT40 $368
M-4071-0069 ISO40 DIN69871 $395
M-2045-0138 CAT45 $818
M-4071-0044 HSK E25 $482
M-2045-0071 CAT50 $368
M-4071-0055 HSK E32 $482
M-2045-0292 CAT60 $1,700
M-4071-0054 HSK E40 $482
M-2045-0077 BT30 $368
M-4071-0045 HSK A32 $482
M-2045-0027 BT40 $368
M-4071-0046 HSK A40 $482
M-2045-0038 BT45 $818
M-4071-0047 HSK A50 $649
Machine tool probes

M-2045-0073 BT50 $368

M-4071-0129 HSK A63 $568
M-2045-0186 HSK A40 $693
M-4071-0141 CAPTO C4 $791
M-2045-0187 HSK A50 $826
M-4071-0066 CAPTO C5 $822
M-2045-0188 HSK A63 $887
M-4071-0067 CAPTO C6 $822
M-2045-0189 HSK A80 $1,074
M-4071-0065 KM63 $822
M-2045-0190 HSK A100 $1,077
A-2045-0243 ½ in straight shank $218
2-16 A-2030-0252 1 in straight shank $218
OMP40, OMP400 and RMP40 shank kits
A-2030-0211 25 mm straight shank $218
M-2045-0313 CAPTO C4 $750
M-2045-0346 CAPTO C5 $995
CAT40 shank kit
M-2045-0310 CAPTO C6 $676 Includes: CAT40 shank
M-2045-0311 CAPTO C8 $1,672 OMP60/RMP60 shank adaptor
M-2045-0335 KM63 $1,388
M-2045-1831591 KM63Y (Mazak) $1,388 Part number: M-4071-0058-RI Price: $539

BT40 shank kit

Calibration masters
Includes: BT40 shank
Calibration tools OMP60/RMP60 shank adaptor

Part number: M-4071-0057-RI Price: $539

Part number Description Price

M-2253-0954 CAT40 $431

M-2253-0955 CAT50 $539 Shanks for OLP40 and RLP40
M-2253-1562 BT30 $697
M-2253-1263 BT40 $431 Part number Description Price
M-2253-1262 BT50 $539
A-5625-1003 25 mm straight shank $218
A-5625-1004 ½ in straight shank $218
A-5625-1007 1 in straight shank $218
Tool setting probes for machining centers

NC3 tool setter

NC3 is a non-contact tool setter, available in a fixed configuration
and offered in a single size. NC3 is compact and designed to
accommodate tools up to 80 mm diameter making it ideal for
small to medium machining centers and special applications.

Repeatability ±0.15 µm (0.000006 in)

Min: 0.20 mm (0.008 in)
Measurement Max: 80 mm (3.15 in)
Tool diameter
Off-center 100 mm (3.94 in)
Breakage Min: 0.10 mm (0.0039 in)

Machine tool probes

NC3 fixed system kit
Includes: NC3 fixed unit with 10 m integral cable
NCi-5 interface
Air regulator kit
Ø17 mm OD × 4 m conduit
Mounting plate 2-17

Part number: A-4179-1100 Price: $4,531

NC3 fixed unit only NC3 air regulator kit

Includes: NC3 fixed unit with 10 m integral cable
Part number: A-4179-1600 Price: $443

Part number: A-4179-1500 Price: $3,631

NC3 air filter service kit

NC3 fixed system retrofit kit Part number: P-FI01-S002 Price: $147

NC3 retrofit kit includes all items above plus the following:
Steel sheath conduit
Tool setting software
Ø17 mm OD × 1 m length, for cable protection.
Installation and application support
Part number: P-HO01-0008 Price: $23
Part number: NC3-F135-S Price: Call for details

45° mounting bracket

NCi-5 interface
Part number: A-4179-1501 Price: $97
Part number: A-5259-2000 Price: $226

NC3 air nozzle kit

Part number: A-4179-0450 Price: $81

 Machine tool probes

NC4 tool setter NC4 fixed kits

NC4 is a non-contact tool setter and our most compact design. NC4 F300/225 with NCi-5 kit
NC4 is available in fixed or separate configurations. NC4F (fixed)
Separation 225 mm
is available in four different sizes. NC4S (separate) systems are
user-configurable operating between 500 mm and 5 m. Part number: NC4-F300-Modular-kit Price: $4,781

Repeatability ±1.0 µm (0.00004 in)

Minimum tool Measurement 0.03 mm (0.0012 in) NC4 F300/240 with NCi-5 kit
diameter Breakage 0.03 mm (0.0012 in)
Separation 240 mm

Part number: NC4-F300-kit Price: $4,781

NC4 fixed system retrofit kits
Include: NC4 fixed unit with 12.5 m cable NC4 F230/170 with NCi-5 kit
NCi-5 interface
Separation 170 mm
Air regulator kit
Ø22 mm OD steel braided conduit Part number: NC4-F230-kit Price: $4,781
Machine tool probes

Mounting plate
Tool setting software NC4 F145/85 with NCi-5 kit
Installation and application support Separation 85 mm

Part numbers: NC4-F300-Modular-S * Part number: NC4-F145-kit Price: $4,781

NC4-F300-S *
NC4-F230-S * NC4 F115/55 with NCi-5 kit
2-18 NC4-F145-S *
Separation 55 mm
NC4-F115-S *
NC4-F95-S * Part number: NC4-F115-kit Price: $4,781

NC4 F95/23 with NCi-5 kit

NC4 separate system retrofit kits
Separation 23 mm
Include: NC4 separate unit with 12.5 m cable
NCi-5 interface Part number: NC4-F95-kit Price: $4,781
Air regulator kit
Ø17 mm OD steel braided conduit NC4 separate kits
Tool setting software
Installation and application support NC4 S800 with NCi-5 kit
Part numbers: NC4-S800-S * Separation 500 mm – 800 mm
NC4-S1500-S *
Part number: A-4114-5060 Price: $4,747
NC4-S2000-S *
NC4-S3000-S *
NC4 S1500 with NCi-5 kit
NC4-S5000-S *
Separation 800 mm – 1500 mm
Note: When ordering a separate system retrofit kit, the customer
must select an NC4 based on its operating range. In addition, Part number: A-4114-5065 Price: $4,747
the customer must select tool setting software based on the
control type. Brackets and an adjusting method (see following NC4 S2000 with NCi-5 kit
page) are also needed for NC4 separate systems. These Separation 1500 mm – 2000 mm
are not included with NC4 separate systems and must be
ordered additionally. Mounting brackets for various machines Part number: A-4114-5070 Price: $4,747
are continually developed. Contact Renishaw for the latest list
of compatibility. Bracket installation is not included with the NC4 S3000 with NCi-5 kit
standard separate system retrofit price, this service can be Separation 2000 mm – 3000 mm
quoted upon request.
Part number: A-4114-5075 Price: $4,747
* Available at a fixed price. Call for details.
NC4 S5000 with NCi-5 kit
Separation 3000 mm – 5000 mm

Part number: A-4114-5080 Price: $4,747

NC4 tool kit Steel sheath conduit 22 mm OD × 1 m
For NC4 fixed cable protection.
Part number: A-4114-4110 Price: $43
Part number: P-HO01-0011 Price: $23
NC4 air regulator kit
Steel sheath conduit 17 mm OD × 1 m
Part number: A-2253-5120 Price: $443
For NC4 separate cable protection.
NC4 air filter service kit
Part number: P-HO01-0008 Price: $23
Part number: P-FI01-S002 Price: $147
NC4F 90-degree cable exit kit
NCi-5 interface
Part number: P-CA61-0068 Price: $22
Part number: A-5259-2000 Price: $226 Part number: P-CA61-0069 Price: $22

NC4F air blast nozzle and bracket

Machine tool probes

NC4 access panel 0.2

Part number: A-4114-0082 Price: $22 Part number: A-5450-0480 Price: $305

NC4 access panel 0.4 Solenoid kit

Part number: A-4114-0084 Price: $22 Part number: A-5450-0490 Price: $850
2-19
NC4 access panel 0.6

Part number: A-4114-0086 Price: $22

NC4 set-up tool

Part number: A-4114-8000 Price: $342

NC4S mounting hardware options

1. NC4 spacer plate – separate
2

Part number: A-4114-4400 Price: $102

2. NC4 adjuster pack – separate

1

Part number: A-4114-3100 Price: $228

 Machine tool probes

OTS
The OTS is a new optical transmission tool setter for vertical and
horizontal machining centers. Modeled on the TS27R, OTS can
set tool length and diameter of rotating tools and perform broken OTS ½AA
tool detection. OTS is available in two configurations – OTS
½AA and OTS AA. OTS can be used with the OMI‑2, OMI‑2T or
OMM-2/OSI interface. OMI-2T or OMM-2/OSI must be used if
OTS is to be paired with another optical transmission probe.

Sense directions ±X, ±Y, +Z

X and Y: ±10°
Stylus overtravel
Z: 5.5 mm (0.21 in)
Stylus trigger force 130 gf – 240 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

OTS retrofit kit OTS AA

Machine tool probes

Includes: OTS ½AA or OTS AA probe

OMI-2T
Receiver mounting bracket
Sealtite kit OMM-2 optical receiver
Renishaw tool setting software
Part number: A-5492-0051 Price: $986
2-20 Installation and application support

Part number: OTS-S (½AA configuration) OMI-2 optical receiver/interface

Part number: OTSAA-S (AA configuration)
With 8 m cable.
Available at fixed price – call for details.
Part number: A-5191-0049 Price: $1,582
Note: The retrofit questionnaire at the end of this section must
be filled out and returned to Renishaw before a retrofit order can OMI-2 optical receiver/interface
be processed.
With 15 m cable.

Part number: A-5191-0050 Price: $1,664

OTS hardware only kit
Includes: OTS ½AA probe or OTS AA probe OMI-2T optical receiver/interface
OMI-2T
With 8 m cable.
Receiver mounting bracket
Sealtite kit Part number: A-5439-0049 Price: $1,582
Part number: OTS-KIT Price: $4,388
Part number: OTSAA-KIT Price: $4,388 OMI-2T optical receiver/interface
With 15 m cable.

OTS ½AA probe kit Part number: A-5439-0050 Price: $1,664

Includes: OTS probe
½ AA battery (2) Receiver mounting bracket
Tool kit
Part number: A-2033-0830 Price: $119
Part number: A-5401-2001 Price: $2,271
OSI interface

OTS AA probe kit Part number: A-5492-2000 Price: $931

Includes: OTS probe

Sealtite conduit for OMM-2, OMI-2 or OMI-2T
AA battery (2)
Tool kit 5/16 in conduit, 1 m long. Includes one fitting.

Part number: A-5514-2001 Price: $2,271 Part number: A-4113-0306 Price: $27
RTS
The RTS is a radio transmission tool setter for vertical and
horizontal machining centers. Modeled after the OTS, RTS can
set tool length and diameter of rotating tools and perform broken
tool detection. RTS uses AA batteries (identical to RMP60). RTS
can be used with either the RMI or the RMI-Q. The RMI-Q must
be used if RTS is to be paired with another radio transmission
probe.

Sense directions ±X, ±Y, +Z

X and Y: ±10°
Stylus overtravel
Z: 5.5 mm (0.21 in)
Stylus trigger force 130 gf – 240 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

Machine tool probes

RTS retrofit kit RMI radio machine interface
Includes: RTS AA probe Part number: A-4113-0050 Price: $2,559
RMI-Q
2-21
Receiver mounting bracket
Sealtite kit RMI-Q radio machine interface
Renishaw tool setting software
Installation and application support Part number: A-5687-0050 Price: $2,559

Part number: RTSAA-S

Available at fixed price – call for details. Receiver mounting bracket
Note: The retrofit questionnaire at the end of this section must Part number: A-2033-0830 Price: $119
be filled out and returned to Renishaw before a retrofit order can
be processed.
Sealtite conduit
5/16 in conduit, 1 m long. Includes one fitting.
RTS hardware only kit
Includes: RTS AA probe Part number: A-4113-0306 Price: $27
RMI-Q
Receiver mounting bracket
Sealtite kit

Part number: RTSAA-KIT Price: $5,711

RTS AA probe kit

Includes: RTS probe
AA battery (2)
Tool kit

Part number: A-5646-0001 Price: $2,952

 Machine tool probes

TS27R
The TS27R is a tool setter for vertical machining
centers that enables the user to set both tool length and
diameter of rotating tools, and to carry out broken tool
detection.

Sense directions ±X, ±Y, +Z

X and Y: ±10°
Stylus overtravel
Z: 5.5 mm (0.21 in)
Stylus trigger force 130 gf – 240 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

TS27R retrofit kit OTS, RTS or TS27R replacement

Includes: TS27R probe parts and accessories
Machine tool probes

HSI interface
Sealtite kit Tungsten carbide stylus (0.5 in disk)
Renishaw toolsetting software
Installation and application support Part number: A-2008-0382 Price: $111

Part number: TS27R-S (Available at fixed price) Ceramic stylus (19 mm square)
Call for details
2-22 Part number: A-2008-0384 Price: $260

Note: The retrofit questionnaire at the end of this section

must be filled out and returned to Renishaw before a
Retrofit stylus kit
retrofit order can be processed. Includes: Break protection
Tether
Screws
TS27R hardware only kit
Part number: A-5003-5171 Price: $35
Includes: TS27R probe
HSI interface
Sealtite kit
Break protect link

Part number: A-5003-0661 Price: $25

Part number: TS27R-KIT Price: $1,403

Stylus holder with 4 set screws

TS27R probe, stylus, and holder kit Part number: A-2008-0389 Price: $25

Part number: A-2008-0368 Price: $1,136

Stylus holder set screws

Part number: P-SC13-0403 Price: $1

HSI interface
Part number: A-5500-1000 Price: $198 Crank for horizontal machining centers

Part number: A-2008-0448 Price: $120

100 mm riser

Part number: M-2008-0866-RI-KIT Price: $129

TS27 stylus (0.5 in disk)

For TS27 probes shipped prior to July 1995.

Part number: M-5003-1033 (steel) Price: $111

Part number: M-2008-0197 (ceramic) Price: $111
TRS2
TRS2 is a cost-effective laser-based solution for high-speed
broken tool detection. Working with the reflective properties
of a rotating tool, TRS2 can detect broken tools at a distance
of between 300 mm and 2 m, but optimized for use between
300 mm and 1 m. Toolwise™ Electronics makes TRS2
especially effective with tiny, easily broken tools down to
0.019 in (0.5 mm) diameter. TRS2 is suitable for solid profile
tools including drills, taps, reamers and end mills.

TRS2 hardware kit

Includes: TRS2 laser system with integral interface
Tool kit
Air regulator kit
Sealtite kit

Machine tool probes

Mounting bracket
Renishaw TRS2 BTD software

Part number: TRS2-KIT Price: $2,600 TRS2 air regulator kit

Part number: A-2253-5120 Price: $443

TRS2 probe only 2-23
Includes: TRS2 laser system with integral interface TRS2 air filter service kit

Part number: A-5450-0400 Price: $2,008 Part number: P-FI01-S002 Price: $147

Sealtite conduit for TRS2

TRS2 retrofit kit
¼ in conduit, 5 ft long. Includes one fitting.
Includes: TRS2 laser system with integral interface
Tool kit
Part number: SEALTITE, 7455 Price: $23
Air regulator kit
Sealtite kit
TRS2 replacement air cap
Mounting bracket
Renishaw TRS2 BTD software
Part number: A-4178-0440 Price: $26
Installation and application support

Part number: TRS2-S (Available at fixed price)

Call for details
Special pricing available for multiple systems.

Note: The retrofit questionnaire at the end of this section must

be filled out and returned to Renishaw before a retrofit order can
be processed.
 Machine tool probes

TS34
TS34 is a hard-wired tool setter for vertical and horizontal
machining centers that enables users to set both length and
diameter of rotating tools and perform broken tool detection.

Sense directions ±X, ±Y, +Z

X and Y: ±9°
Stylus overtravel
Z: 4 mm (0.157 in)
Stylus trigger force X and Y: 65 gf – 142 gf
Z: 550 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

TS34 probe, stylus and holder kit

Rear exit
Machine tool probes

Part number: A-2197-2100 Price: $3,364

Side exit

Part number: A-2197-3000 Price: $3,364

2-24

HSI interface
Part number: A-5500-1000 Price: $198
Inspection probes for turning centers

OLP40
OLP40 is a compact optical transmission part probe, ideal for
use on turning centers. OLP40’s compact design features an
integrated probe module delivering exceptional robustness
and generous overtravel. Utilizing a revised state-of-the-art
modulated optical transmission method, the system offers the
highest level of resistance to light interference. The OLP40
probe is also backwards compatible with existing OMM/MI12
and OMI receivers. OLP40 supports two methods of probe
activation – M code and spin-on.

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°

Machine tool probes

Stylus overtravel
Z: 6 mm (0.24 in)
X and Y: 50 gf – 90 gf
Stylus trigger force
Z: 585 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

2-25

OLP40 retrofit kit OLP40 probe kit

Includes: OLP40 probe and transmission system Includes: OLP40 probe
OMI-2 optical machine interface ½ AA battery (2)
Receiver mounting bracket Tool kit
30 mm stainless steel stylus (×2)
Legacy
Sealtite kit
Renishaw lathe inspection software Part number: A-5625-0001 Price: $3,803
Installation and applications support
Modulated
A shank is not included in this kit. See section entitled Shanks
Part number: A-5625-2001 Price: $3,803
and Toolholders for price and part number information.

Part number: OLP40-NS-S (Available at fixed price)

Call for details
Note: The retrofit questionnaire at the end of this section must
be filled out and returned to us before a retrofit order can be
processed.

OLP40 hardware only kit

Includes: OLP40 probe and transmission system
OMI-2 optical machine interface
Receiver mounting bracket
30 mm stainless steel stylus (×2)
Sealtite kit

Part number: OLP40-NS-KIT Price: $6,060

 Machine tool probes

OLP40 continued
OMM optical receiver
Part number: A-2033-0576 Price: $986

OMM-2 optical receiver

Part number: A-5492-0051 Price: $986

OMI-2 optical receiver/interface

With 8 m cable.

Part number: A-5191-0049 Price: $1,582

OMI-2 optical receiver/interface

Machine tool probes

With 15 m cable.

Part number: A-5191-0050 Price: $1,664

OMI-2T optical receiver/interface

With 8 m cable.
2-26
Part number: A-5439-0049 Price: $1,582

OMI-2T optical receiver/interface

With 15 m cable.

Part number: A-5439-0050 Price: $1,664

Receiver mounting bracket

Part number: A-2033-0830 Price: $119

MI12 interface
Part number: A-2075-0142 Price: $931

OSI interface
Part number: A-5492-2000 Price: $931

Sealtite conduit for OMM or OMI

¼ in conduit, 5 ft long. Includes one fitting.

Part number: SEALTITE, 7455 Price: $23

Sealtite conduit for OMM-2, OMI-2 or OMI-2T

5/16 in conduit, 1 meter long. Includes one fitting.

Part number: A-4113-0306 Price: $27

OMP40M 1 – OMP40M transmission module
Legacy
OMP40M is a modular version of the OLP40. The LP2 probe
module, adaptors and extensions need to be purchased Part number: A-5626-0001 Price: $1,320
separately. Modulated
Part number: A-5626-2001 Price: $1,320
2
2 – LPE3 extension 150 mm

3 Part number: A-2063-7003 Price: $285

3 – LPE2 extension 100 mm

1
4 6
Part number: A-2063-7002 Price: $285
OMP

40M

4 – LPE1 extension 50 mm
43798

Part number: A-2063-7001 Price: $285

Machine tool probes

5 – MA4 90° adaptor

Part number: A-2063-7600 Price: $464

6 – LP2 probe assembly

Part number: A-2063-6098 Price: $2,961 2-27

OMP40M retrofit kit OMI-2 optical receiver/interface

Includes: OMP40M transmission system Part number: A-5191-0049 Price: $1,582
LP2 probe
OMI-2 optical machine interface OMI-2T optical receiver/interface
Receiver mounting bracket
Part number: A-5439-0049 Price: $1,582
30 mm stainless steel stylus (×2)
Sealtite kit
Renishaw lathe inspection software Receiver mounting bracket
Installation and applications support Part number: A-2033-0830 Price: $119
Part number: OMP40M-NS-S (Available at fixed price)
Call for details MI12 interface
Part number: A-2075-0142 Price: $931
OMP40M hardware only kit
Includes: OMP40 transmission system OSI interface
LP2 probe
Part number: A-5492-2000 Price: $931
OMI-2 optical machine interface
Receiver mounting bracket
30 mm stainless steel stylus (×2) Sealtite conduit for OMM or OMI
Sealtite kit ¼ in conduit, 5 ft long. Includes one fitting.
Part number: OMP40M-NS-KIT Price: $6,538 Part number: SEALTITE, 7455 Price: $23
A shank is not included in the above kits. See section entitled
Shanks and Toolholders for price and part number information. Sealtite conduit for OMM-2, OMI-2 or OMI‑2T
5/16 in conduit, 1 meter long. Includes one fitting.
OMM optical receiver
Part number: A-4113-0306 Price: $27
Part number: A-2033-0576 Price: $986

OMM-2 optical receiver

Part number: A-5492-0051 Price: $986
 Machine tool probes

RLP40
RLP40 is a compact radio transmission part probe, ideal
for use on turning centers. RLP40’s compact design
features an integrated probe module delivering exceptional
robustness and generous overtravel. RLP40 complies with
FCC regulations and operates in the 2.4 Ghz range. RLP40
delivers interference-free transmission through the use of
FHSS (frequency hopping spread spectrum).

RLP40 supports two methods of probe activation:

Radio-on The probe is turned on via an RF signal

produced by the RMI and initiated by an M code.
The probe is turned off via an RF signal or the
internal timer.

Spin-on The probe is turned on via an internal centrifugal

switch. The probe is turned off via the centrifugal
Machine tool probes

switch or the internal timer.

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°
Stylus overtravel
Z: 6 mm (0.24 in)
X and Y: 50 gf – 90 gf
2-28 Stylus trigger force
Z: 585 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

RLP40 retrofit kit

RLP40 probe kit
Includes: RLP40 probe and transmission system
RMI radio machine interface Includes: RLP40 probe
Receiver mounting bracket ½ AA battery (2)
30 mm stainless steel stylus (×2) Tool kit
Sealtite kit
Part number: A-5627-0001 Price: $4,600
Renishaw lathe inspection software
Installation and applications support
RMI radio machine interface
A shank is not included in this kit. See section entitled
Shanks and Toolholders for price and part number Part number: A-4113-0050 Price: $2,559
information.
Receiver mounting bracket
Part number: RLP40-NS-S (Available at fixed price)
Call for details Part number: A-2033-0830 Price: $119

Note: The retrofit questionnaire at the end of this section

must be filled out and returned to Renishaw before a retrofit
Sealtite conduit
order can be processed. 5/16 in conduit, 1 m long. Includes one fitting.

RLP40 hardware only kit Part number: A-4113-0306 Price: $27

Includes: RLP40 probe and transmission system

RMI radio machine interface
Receiver mounting bracket
30 mm stainless steel stylus (×2)
Sealtite kit

Part number: RLP40-NS-KIT Price: $7,499

RMP40M 1 – RMP40M transmission module

Part number: A-5628-0001 Price: $2,000

RMP40M is a modular version of the RLP40. The LP2 probe
module, adaptors and extensions need to be purchased 2 – LPE3 extension 150 mm
separately.
Part number: A-2063-7003 Price: $285
2
3 – LPE2 extension 100 mm

Part number: A-2063-7002 Price: $285

3
4 – LPE1 extension 50 mm
1
4 6 Part number: A-2063-7001 Price: $285
RMP

40M

5 – MA4 90° adaptor

43798

5
Part number: A-2063-7600 Price: $464

Machine tool probes

6 – LP2 probe assembly

Part number: A-2063-6098 Price: $2,961

RMP40M retrofit kit RMI radio machine interface 2-29

Includes: RMP40M transmission system Part number: A-4113-0050 Price: $2,559
LP2 probe
Receiver radio machine interface Receiver mounting bracket
Receiver mounting bracket
30 mm stainless steel stylus (×2) Part number: A-2033-0830 Price: $119
Sealtite kit
Renishaw lathe inspection software Sealtite conduit
Installation and applications support
5/16 in conduit, 1 m long. Includes one fitting.
Part number: RMP40M-NS-S (Available at fixed price)
Call for details Part number: A-4113-0306 Price: $27

RMP40M hardware only kit

Includes: RMP40 transmission system
LP2 probe
RMI radio machine interface
Receiver mounting bracket
30 mm stainless steel stylus (×2)
Sealtite kit

Part number: RMP40M-NS-KIT Price: $7,860

A shank is not included in the above kits. See section entitled
Shanks and Toolholders for price and part number information.
 Machine tool probes

LP2
The LP2 probe is used on CNC lathes for workpiece inspection and tool
setting. It is also used in special applications where its small body makes it
suitable for gaging workpiece features with restricted access.

The LP2 is universal and can be fitted to optical, inductive, hard-wired and
radio transmission systems. An array of sockets and adaptors is available to
support these applications. Please contact Renishaw for further details.

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°
Stylus overtravel
Z: 6.5 mm (0.25 in)
X and Y: 50 gf – 90 gf
Stylus trigger force
Z: 585 gf
Unidirectional repeatability 1.0 µm (0.00004 in)
Machine tool probes

Includes: LP2 probe

2 C spanners
TK1 tool kit

Part number: A-2063-6098 Price: $2,961

LP2H
2-30
The LP2H probe is used on CNC lathes for workpiece inspection and tool
setting. It is designed for heavier duty applications where machine vibration or
heavy stylus arrangements may cause unexpected triggers.

Sense directions ±X, ±Y, +Z

X and Y: ±12.5°
Stylus overtravel
Z: 5 mm (0.20 in)
X and Y: 200 gf – 400 gf
Stylus trigger force
Z: 3000 gf
Unidirectional repeatability 2.0 µm (0.00008 in)

Includes: LP2H probe

2 C spanners
TK1 tool kit

Part number: A-2064-0002 Price: $2,961

LP2DD
The LP2DD probe is based on the LP2 design, but incorporates a revised
diaphragm assembly. This probe is recommended for grinding machines and
other installations where dust-filled coolant is abundant.

Sense directions ±X, ±Y, +Z

X and Y: ±15°
Stylus overtravel
Z: 6.5 mm (0.25 in)
X and Y: 50 gf – 90 gf
Stylus trigger force
Z: 585 gf
Unidirectional repeatability 1.0 µm (0.00004 in)

Includes: LP2DD probe

2 C spanners
TK1 tool kit

Part number: A-2063-8020 Price: $2,961

LP2/LP2DD replacement parts
Conversion kit
This kit allows the conversion of your existing LP2 probe to LP2DD.

Includes: 2 C spanners
Front ring
Outer diapragm
O ring

Part number: A-2063-8023 Price: $170

LP2DD diaphragm replacement kit

An outer diaphragm replacement kit for the LP2DD.

Includes: Diaphragm

Machine tool probes

O ring

Part number: A-2063-8030 Price: $40

Chip deflector
This deflector is recommended if the LP2DD is subjected to
continual exposure to hot chips. 2-31

Part number: M-2063-8003 Price: $40

C spanner
A C spanner is required for fitting an LP2 to your machine.

Part number: A-2063-7587 Price: $17

LP2 service kit (DK2)

Includes: Front cap
Metal eyelid
Spring
O ring

Part number: A-2063-7542 Price: $75

TK1 tool kit

Includes: Stylus tool
1.5 mm A/F hex key
2.0 mm A/F hex key
2.5 mm A/F hex key
3.0 mm A/F hex key
4.0 mm A/F hex key

Part number: A-2053-7531 Price: $36

 Machine tool probes

LP2 accessories LPE1 extension

A 50 mm long extension which can be fitted between the
FS1 adjustable female socket LP2 and holder.

Provdies ±4° of angular rotation about the centerline of

Part number: A-2063-7001 Price: $285
the LP2. Supplied with 500 mm long cable, protective
cover and adjusting screws.
LPE2 extension
Part number: A-2063-6697 Price: $136 100 mm long.

FS2 fixed female socket Part number: A-2063-7002 Price: $285

Designed for rigid mounting of an LP2. Supplied with
500 mm long cable and protective cover. LPE3 extension
150 mm long
Part number: A-2063-5431 Price: $136
Part number: A-2063-7003 Price: $285
Machine tool probes

FS3 single axis adjustable holder

The socket pivots on two balls, this provides ±4° of pitch
LP2 straight shanks
adjustment about the centerline of the LP2. Supplied
with 500 mm long cable, protective cover and adjusting LP2 straight shanks are fitted with FS2 socket
screws. assemblies to accommodate the LP2 probe. An MI8
interface is also required.
2-32 Part number: A-2063-5308 Price: $238
LP2 0.75 in straight shank with FS2 and
MA4 90° adaptor cable assembly

Part number: A-2063-7600 Price: $464 Part number: A-2063-8326 Price: $1,223

COS to LP2 adaptor LP2 1 in straight shank with FS2 and

cable assembly
This adaptor allows the use of the LP2 on the MP7/MP8/
MP9/MP10 OMP.
Part number: A-2063-8328 Price: $1,223

Part number: A-2063-7774 Price: $603

LP2 22 mm straight shank with FS2 and
cable assembly
IMP inductive module
Part number: A-2063-8366 Price: $1,223
Part number: A-2028-7574 Price: $623

MI5 interface

Part number: A-2019-0006 Price: $583

MI8 interface

Part number: A-2037-0010 Price: $198

MP250
MP250 is the next generation compact probe. Measuring just
25 mm in diameter and 40 mm in length, MP250 is identical
in size to the popular LP2. MP250 uses Rengage™ strain
gage sensing technology and delivers superior metrology
performance. MP250 is aimed at the tool cutter grinder and
special CNC lathe markets. MP250 is supported via hard-wired
only and must be used with the HSI interface and FS sockets
designed specifically for the MP250. MP250 is not suitable for
use with inductive, optical or radio transmission.

Sense directions ±X, ±Y, +Z

X and Y: ±15°
Stylus overtravel
Z: 6.5 mm (0.25 in)
X and Y: 11 gf
Stylus trigger force
Z: 220 gf

Machine tool probes

Unidirectional repeatability 0.25 µm (0.00001 in)

MP250 probe kit

Includes: MP250 probe
Tool kit
2-33

Part number: A-5500-1600 Price: $4,420

MP250 accessories

FS1 adjustable female socket for MP250

Part number: A-5500-1710 Price: $226

FS2 fixed female socket for MP250

Part number: A-5500-1810 Price: $226

HSI interface for MP250

Part number: A-5500-1000 Price: $198

 Machine tool probes

Tool setting for turning centers

High precision removable arm (HPRA) TSi2

interface
The HPRA is a ‘plug-in’, cost effective, precision tool setting system CNC machine controller
for use on CNC lathes. When needed, the arm is manually introduced
to the machine envelope and held in place through the use of the
machine resident HPRA base. The arm is locked in position through Stylus
the duration of the tool setting cycle. After use, the arm is removed and
stored on the HPRA storage stand.
Stand
Unidirectional repeatability RP3
Max 2 sigma value: 5.0 µm (0.0002 in) for arms Base
supporting 6 in to 15 in chucks
8.0 µm (0.0003 in) for arms
supporting 18 in to 24 in chucks
Machine tool probes

Max arm dimensions: A=580 mm B=450 mm

HPRA
Min arm dimensions: A=250 mm B=211 mm

HPRA is available to fit most common chuck sizes from 6 in to 24 in.

Each HPRA standard kit (see below) is supplied complete with:

• RP3 probe (A-2197-0049)

• 90° probe holder
2-34 • TSi2 interface (A-2176-0010)
• HPRA storage stand (A-2176-0019)

Standard kits
Part number: See below Price: $3,538*
* A stylus assembly and base (R/E or S/E) rear exit or side exit are not
included and must be ordered separately.

Part description Part number A-dimension B-dimension

HPRA 6 in chuck with RP3 kit A-2176-0883 250 211
HPRA 8 in chuck with RP3 kit A-2176-0884 280 241
HPRA 10 in chuck with RP3 kit A-2176-0885 325 290
HPRA 12 in chuck with RP3 kit A-2176-0886 355 290
HPRA 15 in chuck with RP3 kit A-2176-0887 455 335
HPRA 18 in chuck with RP3 kit A-2176-0888 510 375
HPRA 24 in chuck with RP3 kit A-2176-0889 580 450

Custom kits
The HPRA can also be designed for specific applications. The customer
must specify arm length, probe holder, stylus configuration etc. The
items below depict some of the options. Please contact Renishaw for
pricing. 3
1 A-2176-0268 PCB/LED housing
2
2 A-2176-0018 90° holder fixed
3 A-2176-0257 I/L holder fixed 1
4 A-2048-0523 LP2 adaptor
5 A-2176-1291 I/L adj RP3 holder
6 A-2176-1290 30° adj RP3 holder 9
7 A-2176-0269 45° adj RP3 holder 8
8 A-2176-1289 60° adj RP3 holder 7
6
9 A-2176-1288 90° adj RP3 holder 5
4
HPRA bases
The HPRA base is designed to provide a repeatable location for fixing the HPRA
arm during tool setting cycles. The base is designed to stay resident within the
machine and is supplied with a cover to protect the unit from coolant and debris
when the arm is not in use. HPRA bases are available in rear and side exit
configurations and are supplied with 3 meters of cable.

HPRA rear exit base

Part number: A-2176-0025 Price: $748

HPRA side exit base

Part number: A-2176-0187 Price: $748

HPRA storage stand

Machine tool probes

Part number: A-2176-0019 Price: $297

HPRA/HPPA/HPMA stylus kits

There are six primary configurations of styli to support HPRA. Each is designed
to be compatible with standard sizes of block tooling ranging from 5/8 in to 2 in. 2-35
Each stylus kit is supplied complete with:

• 15×15×4 stylus assembly

• Break stem
• Stylus extension/adaptor Stylus
assembly
Part number: A-2197-0157 (16 mm tooling) Price: $116
Break
Part number: A-2197-0158 (20 mm tooling) Price: $116 stem
Part number: A-2197-0159 (25 mm tooling) Price: $116
Part number: A-2197-0160 (32 mm tooling) Price: $116
Part number: A-2197-0161 (40 mm tooling) Price: $116
Part number: A-2197-0162 (50 mm tooling) Price: $116

HPRA/HPPA/HPMA break stems and tool kits

Part number: M-2197-0156 (16 mm and 20 mm tooling) Price: $25
Part number: M-2197-0150 (25 mm to 50 mm tooling) Price: $25
Part number: A-2176-0639 (16 mm to 20 mm tooling) Price: $26
Part number: A-2176-0636 (25 mm to 50 mm tooling) Price: $26
 Machine tool probes

High precision pull-down arm

(HPPA)
High precision motorized arm
(HPMA)
The HPPA is a manual ‘pull-down’ ‘push-up’ tool setting system
for use on CNC lathes. The HPMA is an ‘automatic’ servo driven
system. Both products are designed to permanently reside in the
machine envelope.

When needed, the HPPA is manually ‘pulled-down’ into position.

After use, the arm is ‘pushed-up’ away from the cutting volume.
HPMA requires the use of CNC M codes to drive the arm to its
active and stowed positions.

All HPPA and HPMA systems are supplied with an enclosure to

Machine tool probes

protect the probe and stylus assembly when not in use. HPPA and
HPMA hubs are available in both R/E (rear exit ) and S/E (side
exit) configurations. S/E hubs are supplied with a fixed 5 m cable.
R/E hubs are supplied with a bulkhead connector and require
the purchase of a separate cable.

CNC machine controller

2-36 Specifications
Unidirectional repeatability
max 2σ value in machine XZ axis: 5.0 µm (0.0002 in) for arms Probe
enclosure
supporting 6 in to 15 in chucks
8.0 µm (0.0003 in) for arms TSi2 or TSi3 Stylus RP3
supporting 18 in to 24 in chucks interface A-2197-0004
HPPA max arm dimensions: A=555 mm B=458 mm
HPPA/
Cable
HPPA min arm dimensions: A=250 mm B=219 mm HPMA
HPMA max arm dimensions: A=555 mm B=458 mm hub

HPMA min arm dimensions: A=250 mm B=219 mm

HPPA and HPMA are available to fit most common chuck sizes
from 6 in to 24 in. Each ‘standard’ kit (see below) is supplied
complete with: HPPA

• Arm
• HPPA or HPMA hub
• RP3 probe (A-2197-0049)
• 90° probe holder
• TSi2 interface for HPPA (A-2176-0010)
• TSi3 interface for HPMA (A-2181-0465)
• Probe enclosure (A-2275-0098)
• Cable (supplied with S/E systems only, purchase separately
for R/E systems)
HPPA standard kits
Part number: See below Price: $4,181*
* A stylus assembly is not included and must be ordered separately. In addition HPPA
and HPMA R/E systems require the separate purchase of a cable.

Part description Part number A-dimension B-dimension

HPPA 6 in R/E with RP3 kit A-2275-0181 250 219

HPPA 8 in R/E with RP3 kit A-2275-0182 286 249
HPPA 10 in R/E with RP3 kit A-2275-0183 335 298
HPPA 12 in R/E with RP3 kit A-2275-0184 368 298
HPPA 15 in R/E with RP3 kit A-2275-0185 400 343
HPPA 18 in R/E with RP3 kit A-2275-0186 469 383
HPPA 24 in R/E with RP3 kit A-2275-0187 555 458
HPPA 6 in S/E with RP3 kit A-2275-0188 250 219
HPPA 8 in S/E with RP3 kit A-2275-0189 286 249

Machine tool probes

HPPA 10 in S/E with RP3 kit A-2275-0190 335 298
HPPA 12 in S/E with RP3 kit A-2275-0191 368 298
HPPA 15 in S/E with RP3 kit A-2275-0192 400 343 A
HPPA 18 in S/E with RP3 kit A-2275-0193 469 383
HPPA 24 in S/E with RP3 kit A-2275-0194 555 458

HPMA standard kits 2-37

Part number: See below Price: $4,718
Part description Part number A-dimension B-dimension B
HPMA 6 in R/E with RP3 kit A-2181-0645 250 219
HPMA 8 in R/E with RP3 kit A-2181-0646 286 249
HPMA 10 in R/E with RP3 kit A-2181-0647 335 298
HPMA 12 in R/E with RP3 kit A-2181-0648 368 298
HPMA 15 in R/E with RP3 kit A-2181-0649 400 343
HPMA 18 in R/E with RP3 kit A-2181-0650 469 383
HPMA 24 in R/E with RP3 kit A-2181-0651 555 458
HPMA 6 in S/E with RP3 kit A-2181-0652 250 219
HPMA 8 in S/E with RP3 kit A-2181-0653 286 249
HPMA 10 in S/E with RP3 kit A-2181-0654 355 298
HPMA 12 in S/E with RP3 kit A-2181-0655 368 298
HPMA 15 in S/E with RP3 kit A-2181-0656 400 343
HPMA 18 in S/E with RP3 kit A-2181-0657 469 383
HPMA 24 in S/E with RP3 kit A-2181-0658 555 458

Custom kits
The HPPA and HPMA can also be designed for specific applications. The customer
must specify arm length, probe holder, stylus configuration, hub type etc. The items
3
below depict some of the options. Please contact Renishaw for pricing.

1 A-2176-0268 PCB/LED housing 2

2 A-2176-0018 90° holder fixed
1
3 A-2176-0257 I/L holder fixed
4 A-2048-0523 LP2 adaptor
5 A-2176-1291 I/L adj RP3 holder
9
6 A-2176-1290 30° adj RP3 holder 8
7 A-2176-0269 45° adj RP3 holder 7
8 A-2176-1289 60° adj RP3 holder 6
5
9 A-2176-1288 90° adj RP3 holder 4

 Machine tool probes

HPPA/HPMA cables
The HPPA and HPMA R/E systems require the use of one of the cables below:

Part number: P-CA82-1010 (2 meters) Price: $32

Part number: P-CA82-1009 (5 meters) Price: $52
Part number: P-CA82-1011 (10 meters) Price: $73

HPRA/HPPA/HPMA stylus kits

There are six primary configurations of styli to support HPPA and HPMA. Each is
designed to be compatible with standard sizes of block tooling ranging from 5/8 in
to 2 in. Each stylus kit is supplied complete with:

• 15×15×4 stylus assembly

• Break stem Stylus
• Stylus extension/adaptor assembly
Machine tool probes

Break
Part number: A-2197-0157 (16 mm tooling) Price: $116 stem
Part number: A-2197-0158 (20 mm tooling) Price: $116
Part number: A-2197-0159 (25 mm tooling) Price: $116
Part number: A-2197-0160 (32 mm tooling) Price: $116
Part number: A-2197-0161 (40 mm tooling) Price: $116
Part number: A-2197-0162 (50 mm tooling) Price: $116
2-38

HPRA/HPPA/HPMA M4 break stems and tool kits

Part number: M-2197-0156 (16 mm and 20 mm tooling) Price: $25
Part number: M-2197-0150 (25 mm to 50 mm tooling) Price: $25
Part number: M-2048-2093 (Mori Seiki) Price: $25
Part number: A-2176-0639 (16 mm to 20 mm tooling) Price: $26
Part number: A-2176-0636 (25 mm to 50 mm tooling) Price: $26

Legacy HPA stylus kits

TS20 replacement stylus kit

Includes stylus 10×10×4, break protect link, adaptor and screw.

Part number: A-2008-0601 (25 mm tooling) Price: $116

Part number: A-2008-0602 (32 mm tooling) Price: $116
Part number: A-2008-0603 (40 mm tooling) Price: $116

TS20 break protect link

Part number: M-2008-0333 (25 mm tooling) Price: $25

Part number: M-2008-0604 (32 mm tooling) Price: $25
Part number: M-2008-0605 (40 mm tooling) Price: $25
RP1, RP2 and RP3 tool setting probes
The RP1, RP2 and RP3 probes are suitable for OEM installation into purpose-
built holders, or for use with Renishaw’s automatic or manual tool setting arms.

RP1 – Tool setting/inspection probe and tool kit

For use on OEM installation into purpose-built holders.

Part number: A-2154-0007 Price: $1,470

RP1 DD – RP1 double diaphragm version and tool kit

For use on OEM installation into purpose-built holders.

Machine tool probes

Part number: A-2154-0008 Price: $1,470

2-39
RP2 – Probe for tool setting arm (TSA) only

Part number: A-2116-0149 Price: $1,470

RP2DD – RP2 double diaphragm version for TSA only

Part number: A-2116-0150 Price: $1,470

RP3 – Probe for HPRA, HPPA and HPMA arms

Part number: A-2197-0049 Price: $1,470

 Machine tool probes

Interfaces

MI5 interface
The MI5 interface is required for use with Renishaw’s inductive
transmission probe systems. The MI5 converts probe signals into an
acceptable form for the CNC machine control. This interface has solid
state relay outputs.

Part number: A-2019-0006 Price: $583

MI5 board only (SSR)

Part number: A-2084-0500 Price: $498

Machine tool probes

MI12 interface
The MI12 interface is required for use with Renishaw optical probes
using Legacy transmission. The MI12 converts signals received from
the OMM receiver into an acceptable form for the CNC machine
control. This interface has solid state relay outputs.

2-40 Part number: A-2075-0142 Price: $931

MI12 board only (SSR)

Part number: A-2075-0141 Price: $798

OSI interface
The OSI interface is required for use with Renishaw optical probes
using Modulated transmission. The OSI works exclusively with the
OMM-2 receiver.

Part number: A-5492-2000 Price: $931

HSI interface
The HSI interface is required for use with Renishaw’s MP250 and
TS34 probes. The HSI converts signals received from the probe into an
acceptable form for the CNC machine control. The HSI has solid state
relay output.

Part number: A-5500-1000 Price: $198

NCi-5 interface
An NCi-5 interface is required for use with Renishaw non-contact
tool setting systems. The interface converts probe signals into an
acceptable form for the CNC machine control. This interface has solid
state relay outputs.

Part number: A-5259-2000 Price: $226

Receivers and interfaces
OMI, OMI-2 and OMI-2T are optical receivers that transmit signals
between the probe and CNC control. These interfaces differ from
the OMM as they include machine interface circuitry that eliminates
the MI12 interface. All three systems offer visual indicators of probe
status, start signal status, battery condition and error condition.

OMI
OMI is compatible with all Renishaw optical transmission systems
including the new OMP60, OMP40 and OMP400 when configured
for Legacy transmission (does not work with the OTS).

Part number: A-2115-0001 Price: $1,582

Machine tool probes

OMI-2
OMI-2 offers increased resistance to light interference and is
exclusively compatible with Renishaw optical transmission systems
operating in Modulated transmission mode (OMP60, OMP40,
OMP400 or OLP40). 2-41
Part number: A-5191-0049 (8 m cable) Price: $1,582
Part number: A-5191-0050 (15 m cable) Price: $1,664

OMI-2T
OMI-2T is identical to the OMI-2 and is the exclusive interface
supporting the twin probe system. OMI-2T is capable of
communicating with multiple optical probes. CNC must have
supporting M codes. This interface should be used when combining
an OTS with an OMP60, OMP40 or OMP400.

Part number: A-5439-0049 (8 m cable) Price: $1,582

Part number: A-5439-0050 (15 m cable) Price: $1,664

OMM optical machine module

The OMM receiver is required for use with Renishaw optical probes
using Legacy transmission. The OMM works exclusively with the
MI12 interface.

Part number: A-2033-0576 (25 m cable) Price: $986

OMM-2 optical machine module

The OMM-2 receiver is required for use with Renishaw optical
probes using Modulated transmission. The OMM-2 works
exclusively with the OSI. OMM‑2 is capable of communicating with
multiple optical probes.

Part number: A-5492-0051 (25 m cable) Price: $986

 Machine tool probes

RMI radio machine interface

The RMI interface is required for use with Renishaw’s radio
transmission probes. The RMI converts RF signals into an
acceptable form for the CNC machine control. The RMI has solid
state relay output.

Part number: A-4113-0050 (15 m cable) Price: $2,559

RMI accessories
RMI 30 m replacement cable

Part number: A-4113-0303 Price: $378

Machine tool probes

RMI 50 m replacement cable

Part number: A-4113-0304 Price: $515

RMI antenna cover

2-42
Part number: A-4113-0305 Price: $120

RMI-Q radio machine interface

RMI-Q is identical to RMI and is the exclusive interface
supporting multiple (up to four) probe systems. RMI-Q is capable
of communicating with multiple radio probes. CNC must have
supporting M codes. This interface should be used when combining
an RTS with an RMP40, RMP60 or RMP600.

Part number: A-5687-0049 (8 m cable) Price: $2,559

Part number: A-5687-0050 (15 m cable) Price: $2,559

RMI-Q accessories
RMI-Q 30 m replacement cable

Part number: A-5687-0303 Price: $378

RMI-Q 50 m replacement cable

Part number: A-5687-0304 Price: $515

RMI-Q antenna cover

Part number: A-5687-0305 Price: $120

Lathe tool setting arm interfaces
There are two primary configurations of interfaces supporting lathe
arms. The TSi2 and TSi3 deliver OCT (active high) output for probe
status and arm positions, while the TSi2‑C and TSi3‑C interfaces
deliver SSR solid state relay outputs for probe status and arm positions.
The TSi2 and TSi2-C support the HPRA and HPPA lathe arms. The
TSi3 and TSi-3C support the HPMA lathe arm.

TSi2
Part number: A-2176-0010 Price: $185

TSi2-C

Machine tool probes

Part number: A-2176-1152 Price: $185

TSi3
Part number: A-2181-0465 Price: $226
2-43
TSi3-C
Part number: A-2181-2239 Price: $226
 Machine tool probes

Machine tool software

Macro based programming

Renishaw probing and tool setting software is a set of macros that control
probing motion and data manipulation for a number of routines with input of a few
parameters. Some capabilities may vary by specific software package and individual
controller. All software is supplied on CD-ROM with electronic user’s guide.

Inspection Plus software for machining centers

Available measurement cycles include:
• X or Y or Z single surface measure • 4th or 5th axis measure
• Any angle web/pocket • Feature to feature measure
• 3 or 4 point bore/boss • Print data via RS232
Machine tool probes

• Internal/external corner

Description Memory Part number Price

Brother 32A (June 2002 and above) 35K/87M A-4012-0908 $1,076
Brother 32B 35K/87M A-4012-1028 $1,076
Fanuc 0-31 47K/117M A-4012-0516 $1,076
Haas 47K/117M A-4012-0880 $1,076
2-44 Mazak Fusion 47K/117M A-4013-0023 $1,076
Mazak Matrix 65K/163M A-4013-0112 $1,076
Meldas 47K/117M A-4012-0516 $1,076
Mori Seiki (Fanuc control) 47K/117M A-4012-0936 $1,076
Okuma OSP 53K/133M A-4016-1035 $1,076
Siemens 810D/840D (Ver 4 or less) 77K/190M A-4014-0075 $1,076
Siemens 810D/840D (Ver 5 and above) 77K/190M A-4014-0356 $1,076
Toshiba Tosnuc 888 47K/117M A-4012-0610 $1,076
Yasnac I80, MX3, J50, J300 47K/117M A-4014-0070 $1,076

Inspection Plus software for machining centers

using strain gage probes
Available measurement cycles include:
• X or Y or Z single surface measure • Internation/external corner
• XYZ vector measure • 4th or 5th axis measure
• Any angle web/pocket • Feature to feature measure
• 3 or 4 point bore/boss • Print data via RS232

Description Memory Part number Price

Fanuc 0-31 47K/117M A-4012-0685 $1,076
Haas 47K/117M A-4012-0890 $1,076
Mazak Fusion 47K/117M A-4013-0040 $1,076
Meldas 47K/117M A-4012-0685 $1,076
Mori Seiki (Fanuc control) 47K/117M A-4012-0942 $1,076
Okuma OSP 53K/133M A-4016-1035 $1,076
Siemens 810D/840D (Ver 4 or less) 77K/190M A-4014-0152 $1,076
Siemens 810D/840D (Ver 5 and above) 77K/190M A-4014-0362 $1,076
Yasnac I80, MX3, J50, J300 47K/117M A-4014-0104 $1,076
Tool setting software for machining centers
Renishaw tool setting software allows you to set tool length and diameter
offsets for single point and multiple point tools, perform in-cycle broken tool
detection and manual or automatic (programmed) positioning.
Contact tool setting
Description Memory Part number Price
Brother 32A (June 2002 and above) 13K/32M A-4012-1007 $431
Brother 32B 13K/32M A-4012-1103 $431
Fadal 13K/32M A-4016-0043 $431
Fanuc 0-31 9K/23M A-4012-0584 $431
Haas 9K/23M A-4012-0886 $431
Mazak 640M, M32, M+ 9K/23M A-4013-0036 $431
Meldas 9K/23M A-4013-0007 $431
Okuma OSP 9K/23M A-4016-1039 $431
Siemens 810/840D (Ver 4 or less) 9K/23M A-4014-0090 $431
Siemens 810/840D (Ver 5 and above) 9K/23M A-4014-0396 $431

Machine tool probes

Yasnac J50, J300, I80/MX3 9K/23M A-4014-0018 $431
Non-contact tool setting
Description Memory Part number Price
Brother 32A (June 2002 and above) 27K/67M A-4012-0904 $646
Brother 32B 27K/67M A-4012-1035 $646
Fadal 27K/67M A-4016-0061 $646
Fanuc 0-31 24K/67M A-4012-0820 $646 2-45
Haas 24K/67M A-4012-0895 $646
Makino 27K/67M A-4012-0900 $646
Mazak Fusion 24K/67M A-4013-0062 $646
Mazak Matrix 57K/143M A-4013-0119 $646
Meldas 24K/67M A-4013-0050 $646
Okuma OSP 27K/67M A-4016-1021 $646
Siemens 810/840D (Ver 4 or less) 34K/84M A-4014-0157 $646
Siemens 810/840D (Ver 5 and above) 27K/67M A-4014-0401 $646
Yasnac MX3, I80, J50, J300 27K/67M A-4014-0020 $646
Special non-contact tool setting
Description Memory Part number Price
Fanuc angle beam 0-31 27K/67M A-4012-0821 $646
Makino angle beam 27K/67M A-4013-0900 $646
Mazak angle beam Fusion 27K/67M A-4013-0088 $646
Mazak Matrix angle beam 57K/143M A-4013-0119 $646
Mazak E-Series Matrix 52K/130M A-4013-0123 $646
Mazak E-series Fusion 27K/67M A-4013-0092 $646
Mazak Mark III Fusion 27K/67M A-4013-0567 $646
Yasnac angle beam 27K/67M A-4014-0025 $646
 Machine tool probes

Inspection software for turning centers

Renishaw’s Inspection software for turning centers offers macros for:

• single-point (radial) measurement

• two-point (diameter) measurement
• rib/groove measurement
• single Z-surface measurement

It can update tool offsets and work offsets. It has an upper tolerance band which
can be set for no offset correction. On completion of each measurement cycle it
is possible to print out the results.

Description Memory Part number Price

Fanuc 0-31 11K/27M A-4012-0541 $861
Haas 11K/27M A-4012-0874 $861
Mazak Fusion 11K/28M A-4013-0071 $861
Siemens 810D/840D 19K/47M A-4014-0137 $861
Yasnac LX3 10K/26M A-4014-0011 $861
Machine tool probes

Inspection software for multi-axis turning centers

• horizontal and vertical head orientations
• X, Y and Z single surface measure
• bore/boss
2-46 • web/pocket
• C axis find

Description Memory Part number Price

Mazak Mark III Fusion 45K/113M A-4013-0030 $1,076
Mazak E-series Fusion 75K/188M A-4013-0083 $1,076
Mori Seiki MTNT 43K/106M A-4012-0834 $1,076
Hitachi Hi-Cell 75K/188M A-4012-0843 $1,076
Nakamura NTX 46K/113M A-4012-1074 $1,076
Mazak Mark IV and E-series Matrix 110K/275M A-4013-0106 $1,076
Doosan MT 43K/106M A-4012-1016 $1,076

Tool setting software for turning centers

The Renishaw tool setting software for turning centers sets tool length and/or
diameter for static and powered tools. It has manual or automatic (programmed)
positioning capability.

Description Memory Part number Price

Fanuc 0-31 4K/8M A-4012-0528 $431
Haas 4K/8M A-4012-0877 $431
AxiSet™ Check-Up
Compatible with common formats of 5-axis machines,
AxiSet™ Check-Up provides machine users a fast and
accurate method for determining rotary axis pivot points. The
system is comprised of macro software, dedicated calibration
artifact and PC-based data analysis software. Performance
analysis is reported graphically via Microsoft® Excel®,
compared against user-defined tolerances and stored for
historical comparison.

The solutions defined below are compatible with 5-axis table-

table machines. New solutions are being developed. Contact
Renishaw for the latest list of compatibility. Each solution
includes:

• CNC specific macro

• Artifact with magnetic base

Machine tool probes

• PC-based data analysis software

2-47

AxiSet™ Check-Up Mazak Variaxis AxiSet™ Check-Up Hurco Winmax (Table-Table)

Part number: A-5642-1000 Price: $2,500 Part number: A-5642-1105 Price: $2,500

AxiSet™ Check-Up Fanuc (Table-Table) AxiSet™ Check-Up Haas

Part number: A-5642-1100 Price: $2,500 Part number: A-5642-1600 Price: $2,500

AxiSet™ Check-Up Mori Seiki NMV NMH AxiSet™ Check-Up Mori Seiki NT

Part number: A-5642-1405 Price: $2,500

Part number: A-5642-1400 Price: $2,500

AxiSet™ Check-Up Siemens (Table-Table) AxiSet™ Check-Up Siemens (Head-Head)

Part number: A-5642-1515 Price: $2,500

Part number: A-5642-1500 Price: $2,500

AxiSet™ Check-Up Mazak Mark IV

Part number: A-5642-1005 Price: $2,500

AxiSet™ Check-Up Mazak eV/eH

Part number: A-5642-1009 Price: $2,500

 Machine tool probes

Off-line programming
Productivity+™ is a new software module designed to simplify
the process of integrating probing cycles into the CNC
machining program. Productivity+™ Active Editor Pro runs
standalone, while the Productivity+™ GibbsCAM® plug-in
runs in the GibbsCAM® environment and requires GibbsCAM
version 7 or above.

Productivity+™:

• Imports the native CAD model

• Creates and edits probing programs

• Allows simulation of inspection routines in a virtual

environment

• Requires no detailed knowledge of macro codes

Machine tool probes

• Is compatible with many popular controls

Productivity+™ comes with three CAD importers as standard:

IGES, STEP and Parasolid®. Other CAD importers are
available (select from the list below).

Productivity+™ is supplied with one post processor (select

2-48 from the list below).

The Productivity+™ GibbsCAM® plug-in requires the

Productivity+™ CAD importers
GibbsCAM® machine post processor to be upgraded to allow CAD system Part number Price
compatibility. The first post processor upgrade is included. Pro-E A-5226-0007 $1,500
CATIA A-5226-0008 $1,500
Productivity+™ GibbsCAM® plug-in UG/NX A-5226-0009 $1,500
ACIS A-5226-0010 $1,000
Part number: A-4007-1000 Price: $4,995 SolidWorks® A-5226-0011 $1,500
Inventor™ A-5226-0012 $1,500
Productivity+™ Active Editor Pro All of the above A-5226-0020 $2,000

Part number: A-4007-1400 Price: $4,995 GibbsCAM® post processor upgrade service

Productivity+™ multi-axis option for Active Part number: A-4007-1000-RI Price: $300
Editor Pro
Productivy+™ maintenance
Part number: A-5226-2000 Price: $2,500
The first year’s maintenance is included in the purchase price.

One-year maintenance contract for GibbsCAM® plug-in

Productivity+™ post processors
Part number: YI-4007-1000 Price: $840
Control Part number Price
One-year maintenance contract for Active Editor Pro
Brother A-4007-5900 $1,500
Fanuc Macro B A-4007-5100 $1,500 Part number: YI-4007-1400 Price: $840
Haas A-4007-5200 $1,500
One-year maintenance contract for multi-axis option for
Heidenhain A-4007-6000 $1,500 Active Editor Pro
Hitachi Seicos A-4007-5300 $1,500
Hurco A-4007-6800 $1,500 Part number: YI-A-5226-2000 Price: $480
Makino A-4007-5400 $1,500
Mazatrol ISO A-4007-5500 $1,500
Productivity+™ Active Editor Pro 90-day trial
Mitsubishi Meldas A-4007-5600 $1,500
Part number: A-4007-8999 Price: FOC
Mori Seiki A-4007-6600 $1,500
Okuma A-4007-6300 $1,500 CNC Reporter
Siemens A-4007-6700 $1,500
Yasnac A-4007-5700 $1,500 Part number: A-4007-1500 Price: $2,500
Renishaw CappsNC
Renishaw CappsNC is a comprehensive part verification software
package for machine tools, designed to give confidence to the
user that the part produced conforms to the CAD model.

• Generate measurement programs from the CAD model,

offline, in a virtual PC environment.

• Using the comprehensive probe builder, various shanks,

Renishaw probes and styli can be modeled.

• Generate probe paths for 3-axis machines measuring 2D

and 3D prismatic features and 3D free-form surfaces. CappsNC options
• Collision avoidance automatically detects obstructions and
generates avoidance paths. Additional machine interface option
• Supports a variety of CNCs and machine communication Part number: A-5722-3000 Price: $1,650
protocols (RS232, Ethernet, FOCAS, Mnet, TNCDirect,

Machine tool probes

Siemens OPC, MTConnect). Additional execution module
• Uses industry-standard DMIS code to generate machine Includes one machine interface option.
motion, construction, dimensioning and tolerance instructions.
Part number: A-5722-1100 Price: $6,545
• Generate comprehensive measurement reports with full GD&T.

• Using the optional 4th/5th axis module, CappsNC supports a 4th-axis option
variety of multi-axis machine configurations. 2-49
Part number: A-5722-6000 (ADV) Price: $3,190
• Using the optional tool and work offset module, tool
Part number: A-5722-6100 (PROGSTA) Price: $2,145
compensation commands and work offset shifts can be
Part number: A-5722-6200 (EXECMOD) Price: $1,045
incorporated into the post processed output.

• First year maintenance and support included. 5th-axis option

Part number: A-5722-6001 (ADV) Price: $3,190

CappsNC Advanced Part number: A-5722-6101 (PROGSTA) Price: $2,145
CappsNC Advanced is a single software license designed for Part number: A-5722-6201 (EXECMOD) Price: $1,045
the user who intends to program inspection cycles and capture
measurement results on a single PC. Work offset and tool compensation
Includes: Complete CappsNC license Part number: A-5722-6002 (ADV) Price: $6,490
Machine interface option* Part number: A-5722-6102 (PROGSTA) Price: $2,145
CAD importers (IGES and STEP) Part number: A-5722-6202 (EXECMOD) Price: $4,345
One-year CappsNC maintenance and support
Work offset only
Part number: A-5722-1000 Price: $15,345
Part number: A-5722-6005 (ADV) Price: $3,465
CappsNC Advanced Programming Part number: A-5722-6105 (PROGSTA) Price: $1,045
Part number: A-5722-6205 (EXECMOD) Price: $2,145
Server
CappsNC Advanced Programming Server is a modular Tool compensation only
configuration designed for users who have the requirement to
program remotely while capturing measurement results locally, at Part number: A-5722-6006 (ADV) Price: $3,245
the machine tool. Part number: A-5722-6106 (PROGSTA) Price: $1,375
Part number: A-5722-6206 (EXECMOD) Price: $2,475
Includes: Complete CappsNC license
CappsNC execution module* AAT SPC
CAD importers (IGES and STEP)
One-year CappsNC maintenance and support Part number: A-5722-6003 Price: $2,695

Part number: A-5722-1001 Price: $16,445 AAT Modify Bestfit for NC part program
correction
* specify control type (Fanuc, Mazak, Haas, Siemens
or Heidenhain) and interface type (RS232, FOCAS, Part number: A-5722-6004 Price: $8,500
TNCDirect, Mnet or MT Connect)
 Machine tool probes

CappsNC CAD importers Renishaw services

Renishaw has set up a series of part numbers which
Catia4 Direct Import
should be referenced when ordering Renishaw services.
Part number: A-5722-5000 Price: $4,345 These part numbers will appear on your invoice.

Part number Description Price

Catia5 Direct Import RI-6000-0001 Hourly labor $140/hour
RI-6000-0002 Hourly travel $140/hour
Part number: A-5722-5001 Price: $4,345 RI-6000-0003 Expenses as incurred

Pro-E Direct Import

Part number: A-5722-5002 Price: $4,345

Unigraphics Import

Part number: A-5722-5003 Price: $4,345

Machine tool probes

Parasolid Import

Part number: A-5722-5004 Price: $1,650

Solid Works Import

2-50 Part number: A-5722-5005 Price: $1,650

VDA Import

Part number: A-5722-5006 Price: $1,045

CappsNC maintenance
The first year’s maintenance is included. Subsequent years’
maintenance is offered at 15% of the list price for all components.

Part number: A-5722-4000 Price: Varies

CappsNC networking options

CappsNC License MGR – Programming Server

Includes three connections.

Part number: A-5722-3100 Price: $4,950

CappsNC License MGR – Execution Module

Includes two connections.

Part number: A-5722-3101 Price: $2,475

CappsNC License MGR 1 – additional connections

When purchased with initial installation.

Part number: A-5722-3102 Price: $550

CappsNC License MGR 2 – additional connections

When purchased after initial installation.

Part number: A-5722-3104 Price: $2,000

Probe retrofit questionnaire
Customer information (location of installation)

!
Important! This document consists of four pages. Please be sure to read all information before returning.

Address of installation:

Company name __________________________________ Contact name ____________________________________________

Street ____________________________________________

City __________________________________ State ______________________ Zip ____________________________

Telephone ____________________________ Fax _______________________ E-mail __________________________

Machine tool probes

Product being purchased _______________________________________________

Machine information

Machine make ___________________________________ Control make ____________________________________________

2-51

Machine model __________________________________ Control model ___________________________________________

Machine type (i.e. VMC, HMC, lathe, gantry etc.) _________________________________________________________________

Tool holder type/size (i.e. CAT50, BT40, HSK A80, VDI, other) ______________________________________________________

Axis/Axis travels: X ____________ Y ___________ Z __________ B ____________ Other ____________________

Is the machine still in warranty? Yes No Serial # __________________

Is the machine installed? Yes No If no, when will installation be complete? _________________

Spindle orientation: Yes No

Pallet shuttle: Yes No If Yes, indexer or full 4th axis

Is there currently a probe system on the machine (i.e. tool post, part probe, tool eye)? Yes No

If yes, please explain _______________________________________________________________________________________

Is a safety briefing required to work at location of installation? Yes No

Note: If a non-disclosure form is required to enter the facility, please provide at least two weeks prior to the scheduled
visit.

Application information ______________________________________________________________________________________

_________________________________________________________________________________________________________

_________________________________________________________________________________________________________
 Machine tool probes

Note: The machine must be operational at the time of installation. A pull stud is required for spindle-mounted probes, but is not
provided by Renishaw. A calibration device is not supplied.

The following options must be installed and activated (turned on) by your OEM, machine distributor or control
manufacturer prior to Renishaw’s arrival.

Required control features/options

Indicate which options are installed on your control.

Fanuc/Yasnac/Mitsubishi/Mazak Haas

G31 skip Yes No Promac Yes No

G31 high speed skip Yes No

G31 multi-skip Yes No

Custom macro Yes No

Machine tool probes

Connector type/pin location of skip signal ____________________

• 24 V dc required to power probe interface

• M codes may be required – see the following information pages for details
2-52 Note: Controls not listed may have similar features/options. Contact Renishaw regarding support for other controls.

IMPORTANT
This questionnaire is intended for information purposes for installation only and shall in no event constitute a binding contract with
Renishaw.

Please note – The issuer of the purchase order is responsible for all information provided to Renishaw. Please make sure that the
information is as accurate and current as possible, as this will expedite the installation. If additional time or hardware is required,
due to incorrect information, additional costs may be billed to you.

The installation timeframe is 2 to 3 weeks. Please keep in mind that your installation is not considered for scheduling until this form
is completed and returned to us. At that time, the form will be reviewed and you will be contacted as to the acceptability of the
retrofit and dates available for installation.

I have read and understood the preceding information.

!
Important – this document consists of four pages. Please be sure to read all information before returning.

Signed _____________________________________ Date ____________________

Purchase order issued to Renishaw by:

Company name __________________________________ Contact name ____________________________________________

Street ____________________________________________

City ___________________________________ State _______________________ Zip ____________________________

Telephone ______________________________ Fax _______________________

Additional retrofit customer information
Machine tool software requirements
Machining center: Inspection Plus 46.5 Kb 117 m
Tool setting 9 Kb 23 m
NC4 tool setting 15 Kb 38 m

Lathe software: Inspection 11 Kb 28 m

Tool setting 6 Kb 15 m

Program number requirements

Renishaw program numbers range from 9002 through 9100, and 9700 through 9900.

Macro variables required #100–#149 (only used while macro is running)

#500–#565 (some variables in this range required and must be dedicated)

Training

Machine tool probes

Training will be provided after installation on the use and application of Renishaw probing cycles. Training will not include the
incorporation of probe cycles into the customer’s current manufacturing programs. Any special applications or additional software
training which requires additional time or visits to the original scheduled installation/training will be charged at Renishaw Inc
standard service rates.

Note: Please indicate any additional training requirements on your purchase order.

Part probe system details 2-53

OMP40/OMP60/RMP60 Turn on (via optical or RF) / Turn off (via optical or RF) or time out Installation time: Up to 8 hours
Training time: Up to 6 hours

Turn on methods Auto start (OMP40/OMP60) sends a start signal every second until a probe
command is received. This method can only be used if the probe is stored outside
the machine enclosure when not in use.

Machine start (OMP40/OMP60/RMP60) requires that an M code be available for

use to issue the start command.

Spin start (OMP60/RMP60) uses an internal switch. The probe will turn on after
being spun at 650 RPM for 1 second.

Turn off methods Time out (OMP40/OMP60/RMP60). A timer automatically switches the power off 12,
33 or 134 seconds (selectable) after turn on. Each time the probe is triggered, the
timer is reset to the selected value.

Optical off (OMP40/OMP60) / RF off (RMP60) requires that an M code be available

to initiate the turn off sequence.

OMP400 Optical (flash) on/optical off or time out (optical transmission) Installation time Up to 8 hours
Training time Up to 6 hours

Turn on method Machine start (optical on) requires that an M code be available for use to issue the
start command. Auto start cannot be used with the strain gage probes.

Turn off methods Time out. A timer automatically switches the power off 33 or 134 seconds
(selectable) after turn on. Each time the probe is triggered, the timer is reset to 33
or 134 seconds.

Optical off. Requires the use of an M code as stated for machine start above.

RMP40M
Turn on (via optical or RF) / Turn off (via optical or RF) or time out Installation time Up to 8 hours
OLP40M
Training time Up to 6 hours

Turn on method Machine start requires that an M code be available for use to issue the start
command. Auto start cannot be used with these probes (for lathe applications).

Turn off method Optical off. Requires the use of an M code as stated for machine start above.
 Machine tool probes

Tool setting probe details

TS27R Hard-wired Installation time Up to 6 hours
Training time Up to 6 hours

OTS Machine start requires that an M code be available for use to issue the start command. Auto start cannot be
used with these probes.

These probes are fixed either to a T slot in the machine bed, or can be mounted on a riser if required to
allow tools to reach the stylus. A riser is not provided by Renishaw unless specified on the quotation. The
TS27R is wired to the probe interface via a tough cable conduit. The TS27R cannot be mounted on pallets
or rotary tables.

NC4 or TRS2 Hard-wired Fixed installation time Up to 8 hours

Training time Up to 6 hours

Fixed system The probe is fixed either to a T slot in the machine bed, or can be mounted on a riser
if required to allow tools to reach the laser beam. A riser is not provided by Renishaw
unless specified on the quotation. The NC4 is wired to the probe interface via a tough
Machine tool probes

cable conduit. The NC4 cannot be mounted on pallets or rotary tables.

Separate installation time Up to 12 hours *

Training time Up to 6 hours

Separate system The probe transmitter and receiver are mounted to brackets which attach to the
machine. Brackets and their installation are not provided by Renishaw unless specifically
stated in the quotation. Brackets not provided by Renishaw must be mounted prior to the
2-54
arrival of a Renishaw engineer. The brackets should allow for complete machine motion
(pallet shuttles, rotary tables, axis travels etc), laser beam alignment and expected
system performance.

* Depending on bracket mounting requirements, additional time may be required.

Fixed or separate The NC4 must be mounted in such a way that the tool can access the laser beam and
move in all three axes (X, Y, Z) with respect to the beam. For basic functionality (length,
diameter, basic broken tool), no M code is required. For additional features (missing/
broken insert, profile checking, rapid broken tool check) a level M code pair is required.

HPRA Hard-wired The HPRA must be mounted to a bracket which attaches to the machine. The brackets
and their installation are not provided by Renishaw unless specifically stated in the
quotation. Brackets not provided by Renishaw must be mounted prior to the arrival of
a Renishaw engineer. The brackets should allow for complete machine and expected
system performance.

Dual probe installations (part and tool probe on same machine)

Requires either two independent probe inputs (multi-channel skip) or an M code driven relay. The M code driven relay must be
installed and available prior to the probe installation.

Example M51 – part probe (selected) M61 – tool setter (selected)

M51 energize relay (coil latches and stays energized) program continues
M61 de-energize relay (coil resets) program continues

M code for flash (optical) on and off

M71 pulse (momentarily energize relay) program continues

Example: Pulse M code M71 (flash on and flash off)