Scribd
Upload
112 views12 pages

AQE-SMO-I301-CP: Washroom and Plumbing Solutions

This document provides information on the AQUAECO SMOOTH TOUCHLESS BASIN TAP. It has an infrared sensor that activates hands-free water flow and automatically shuts off the water to save water and energy. It is easy to use, hygienic, and can be powered by batteries or mains. The document includes technical specifications, installation instructions, usage instructions, maintenance recommendations, and troubleshooting tips.

Uploaded by

Rahmat Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views12 pages

AQE-SMO-I301-CP: Washroom and Plumbing Solutions

This document provides information on the AQUAECO SMOOTH TOUCHLESS BASIN TAP. It has an infrared sensor that activates hands-free water flow and automatically shuts off the water to save water and energy. It is easy to use, hygienic, and can be powered by batteries or mains. The document includes technical specifications, installation instructions, usage instructions, maintenance recommendations, and troubleshooting tips.

Uploaded by

Rahmat Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

AQUAECO

WASHROOM AND PLUMBING SOLUTIONS

AQE-SMO-I301-CP
SMOOTH TOUCHLESS BASIN TAP
Functions and Features
• Hands free infrared sensor activated

• Automatic shut-off water saving flow control.

• Improves water and energy efficiency.

• Easy to use-ideal for disable or elderly.

• Hygienic-reduces risk of cross-contamination.

• Mains and battery powered options included.

• Vandal resistant.

• Easy to fit in new installations or retrofits.

• Self-adjusting to the environments and sensitive to environmental


change of light and refection also detect water wastage.

• Sensor provides faster, more convenient experience, ensuring the


tap is never left running.

1
Technical Specification
Model no. AQE-SMO-I301-CP

Power input DC:6V(4 x 1,5V AA alkaline battery)


AC:220-240V(50/60Hz)
Detection zone 15-25cm(to white board)
Water pressure 0.05-0.8(Mpa)
Power consumption AC:<0.5mw; DC:<0.3mw
Inlet/outlet diameter G1/2"
Confirmation time <1 second
Water temperature 1°C-50°C

2
Parts name

1. Aerator 8. Control box


2. Faucet body 9. Cable socket
3. Cover 10. Buckle
4. Basin 11. Inlet
5. Nut 12. Outlet
6. Adjustment button
7. Transformer

3
Installation step
1 2

t
<45mm

,-------------�

u
4
4
Installation step

press and hold for 3 second and


wait for 20s.It will detect a proper
distance automatically.

5
Using method
Before use: During use: After use:

Note: when your hand enters the inductive field the water
flows, remove your hand from the field and water stops. It will
stop automatically after flushing 30 seconds continuously, leave
your hand from the inductive field for 3 seconds then enter the field
to flush again.

Maintain
Clean filter
Please ensure the filter is cleaned every 6 months or if the water flow is
reduced.

Clean filter:
(1) Turn off isolating valve. (2) Unscrew flex hose. (3) Take out filter.
(4) Wash filter out and replace.

6
Maintain
Clean aerator

Please ensure the filter is cleaned if the water flow is reduced.

Clean aerator:
(1) Turn off isolating valve. (2) Open and take out filter. (3) Wash
filter out and replace.

7
Troubleshooting Guide
Problem Cause Solution
The battery is exhausted Change the battery
Water supply cut off Check supply
No water out
Dirt in the filter Clean the filter
Water pressure to low Raise the pressure
Water will not turn off Dirt on the sensor window Clean the sensor
Water supply is turned down Adjust water supply

Too little water flow The filter is too dirty Clean the filter

Water pressure is too low Raise the pressure


Too much water flow Water pressure is too high Adjust pressure

Short cycles of Change to 4AA Alkaline


Incorrect batteries
battery batteries

Change the light or circuit


The light is broken
board

The indicator light The circuit board is wet


Dry out
is not on or signal line is wet

The battery is exhausted Change the battery


Poor connection of battery Change battery connections

8
Note:
AQUAECO
WASHROOM AND PLUMBING SOLUTIONS

INE-SMO-I301-XX-12-20

You might also like