Table of Contents
Table of Contents 1
Electrical Power Engineering, Smart Grid Trainers 2
Renewable Energies 2
EWG 1 Wind power plant with DFIG 3
Lucas Nülle GmbH Page 1/24 www.lucas-nuelle.com
Electrical Power Engineering, Smart Grid Trainers
Training systems on the generation, distribution and management of electrical energy:
Power engineering training system, distribution training system
Energy generation training system, renewable energy generation training system
Transformer training system, high-voltage transmission lines training system, protective systems training
system
Energy management training system, smart grid training systems
The Lucas-Nülle training systems have been designed in anticipation of the newest developments:
Smart measuring instruments provided with various communication interfaces (e.g. LAN, RS485, USB)
and control elements
SCADA Power Engineering Lab software for the intelligent control and evaluation of "smart grids" using
Soft PLC
SCADA software designed for educational purposes
Permits investigation of dynamically alternating loads and power generation inside the laboratory
Intelligent energy management
Modular integration of renewable energies into a smart grid using protective engineering
Wind power plant with doubly-fed asynchronous generator (DFIG) and synchronisation to the grid
Interactive multimedia training course
Training systems on the generation, distribution and management of electrical energy:
Power engineering trainer, distribution trainer
Energy generation trainer, renewable energy generation trainer
Transformer trainer, high-voltage transmission lines trainer, protective systems trainer
Energy management trainer, smart grid trainers
The Lucas-Nülle training systems have been designed in anticipation of the newest developments:
Smart measuring instruments which avail of various communication interfaces (e.g. LAN, RS485, USB)
and control elements
SCADA Power Engineering Lab software for the intelligent control and evaluation of the "Smart Grid" with
soft plc
Didactically designed SCADA software
Permits investigation of dynamically alternating loads and power generation inside the laboratory
Intelligent energy management
Modular integration of renewable energies into the smart grid using protective engineering
Wind power plant with doubly-fed asynchronous generator (DFIG) with mains sychronisation
Interactive multimedia training course
Renewable Energies
Lucas Nülle GmbH Page 2/24 www.lucas-nuelle.com
Renewable Energies
The move away from coal, oil and nuclear power to renewable forms of energy is gaining momentum. Today,
technology has evolved to a point where solar energy, wind power, hydrogen fuel and biomass can be exploited
as environmentally friendly energy sources.
Throughout the world well-qualified technicians and engineers are being sought after to help keep this trend
moving forward. Today, technologies are undergoing rapid change. This trend is being compounded by rising
expectations in training and education. Lucas-Nülle has developed the appropriate training systems needed to
cope with the ever more complex world of training and education.
Lucas Nülle GmbH Page 3/24 www.lucas-nuelle.com
EW G 1 W ind power plant with DFIG
EWG 1 Wind power plant with DFIG
This wind trainer is used to investigate the design and operation of modern wind power stations with double-fed
induction generators.
The effect of wind force and the mechanical design of wind power stations can be emulated in realistic detail
using the servo machine testing stand and the WindSim software. The control unit for the double-feed
asynchronous machine (as a generator for the wind power plant) ensures user-friendly operation and
visualisation during the experiments. The corresponding Interactive Lab Assistant Multimedia course is designed
to convey knowledge and provide interactive support for carrying out the experiments and allows for PC-assisted
evaluation of the measured data.
Training content:
Understand the design and operation of modern wind power plants
Explore the physical fundamentals “From wind to wave”
Learn about different wind power concepts
Set up and commission a double-feed asynchronous wind generator
Operate the generator with varying wind force levels and regulate the output voltage and frequency
Manual and automatic synchronization with the 3-phase electricity grid
Automatic control of active and apparent power, frequency and voltage
Determine optimum operating points under changing wind conditions
Investigate the operating response when there are faults on the grid (“fault ride-through”)
Your benefits:
Exact emulation of the technology of the current multi-megawatt wind power generators
A fully working and functional training system for wind turbines with double-fed induction generators
(DFIG)
A wind simulation, which exactly mathematically emulates the wind at the shaft
Investigating "fault-ride-through" (FRT) response to faults on the grid
Measurement and display of all system variables
Integrated power switch for connecting the generator to the 3-phase electricity grid
Operation and monitoring using SCADA with the included WindSim software
Limiting the power of the wind power plant (derating)
Provision of reactive power
Lucas Nülle GmbH Page 4/24 www.lucas-nuelle.com
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos. Product name Bestell-Nr. Anz.
1 Control unit for wind turbine, double-fed asynchronous generator CO3208-3A 1
Modern wind power stations use double-fed asynchronous
generators to feed electrical power into the electricity grid. The control
unit of the double-feed asynchronous generator permits control and
operation of a speed-variable double-feed asynchronous generator
in the laboratory. Using the control unit all of the practice-relevant
operating states can be emulated and investigated. The WindSim
software included ensures user-friendly operation and visualisation
of the measurement values.
The control unit has the following features:
Control unit with two controlled three-phase inverters
Operation of the double-fed asynchronous generator in
under-synchronous and over-synchronous operating mode
Integrated power switch for connecting the generator to the 3-
phase electricity grid
Autonomous control of reactive and active power, frequency,
voltage
Manual and automatic synchronisation to the 3-phase
electricity grid
USB interface
Input for incremental shaft-encoder
Integrated brake chopper permits “fault ride-through”
experiments
Connection voltage: 3 x 300V, 50...60Hz
Maximum output power: 1kVA
Dimensions: 297 x 460 x 210mm (HxWxD)
Weight: 8.3kg
Lucas Nülle GmbH Page 5/24 www.lucas-nuelle.com
2 Three-phase multi-function machine, 1.0kW SE2662-6W 1
Three-phase asynchronous motor with slip-rings which can also be
used as a synchronous machine.
Nominal voltage: 400/230V, 50Hz
Nominal current: 2.0A / 3.5A
Nominal speed: 1400 / 1500rpm
Nominal power: 0.8kW
cos phi: 0.75
Exciter voltage: 130V AC / 24V DC
Exciter current: 4A AC / 11A DC
Dimensions: 500 x 220 x 250 mm (BxHxD)
Weight: 20kg
3 3-phase isolation transformer, 1kW for wind power plants CO3208-3B 1
Three-phase transformer for power feed of double-fed wind power
plants
Primary voltage: 3 x 400 V
Secondary voltage : 3 x 300 V
Rated power: 1000 VA
Fuse: 1 automatic circuit-breaker 1.6...2.5 A (adjustable)
Inputs/outputs: 4-mm safety sockets
Dimensions: 297 x 456 x 150 mm
Weight. 11kg
4 Incremental position encoder 1024 pulses SE2662-5T 1
The incremental encoder is equipped with the following features:
1024 pulses
Speed: 6000 rpm
Torque: <= 1Ncm
Inertia: 35 g cm²
Weight: 1.7kg
One shaft end
Lucas Nülle GmbH Page 6/24 www.lucas-nuelle.com
Supplementary material for "Fault Ride Through" experiments (FRT):
Supplementary material for "Fault Ride Through" experiments (FRT):
Training content:
Investigating the response of wind power plants to system faults
Exploring symmetrical fault scenarios
Exploring asymmetrical fault scenarios
Adjusting controller parameters
Representing variables in the dynamic range as well as with positive phase sequence and negative phase
sequence
Compensation for the negative sequence components
Lucas Nülle GmbH Page 7/24 www.lucas-nuelle.com
Pos. Product name Bestell-Nr. Anz.
5 Dynamic grid fault simulator CO3208-3C 1
Modern wind turbines or photovoltaic power inverters are required
nowadays to respond to faults in the electrical power grid without
simply shutting down. Such a response is called "fault ride-
through". The dynamic grid fault simulator emulates such faults in
the electricity grid. This makes it possible to investigate the response
of any equipment connected downstream from the fault.
The grid fault simulator has the following features:
Adjustable power failure durations from 50ms to 1000ms
5-level, adjustable voltage drop for all phases
Symmetrical and asymmetrical grid faults can be set up
Faults can be selected with or without earth contact
Adjustable start angle fault ride-through analysis
Graphic display
Connector voltage: 3 x 400V, 50...60Hz
Dimensions: 297 x 460 x 210mm (HxWxD)
Weight: 18kg
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos. Product name Bestell-Nr. Anz.
6 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Lucas Nülle GmbH Page 8/24 www.lucas-nuelle.com
The servo-machine test bench is a complete testing system for
examining electrical machines and drives. It consists of a digital
controller, a brake and the AktiveServo software. The system
combines state-of-the-art technology with ease of operation.
The system also allows manual and automated synchronisation to
be carried out.
The controller has the following features:
Dynamic and static four-quadrant operation
10 selectable operating modes/machine models (torque
control, speed control, flywheel, lifting drive, roller/calander,
fan, compressor, winding gear, arbitrarily defined time-
dependent load, manual and automated network
synchronisation)
Integrated galvanically isolated amplifier for voltage and
current measurement
Speed and torque displays
Four-quadrant monitor
USB interface
Thermal monitoring of the machine under test
Testing for the presence of a shaft cover.
Connection voltage: 400V, 50Hz
Maximum power output: 10kVA
Dimensions: 297 x 460 x 420mm (HxWxD)
Weight: 14.3kg
Lucas Nülle GmbH Page 9/24 www.lucas-nuelle.com
The brake is self-cooled asynchronous servo-brake with resolver.
The motor and sensor leads are connected via polarity-safe plugs.
The machine has thermal monitoring and, in conjunction with the
controller, it constitutes a driving and braking system that is free of
drift and requires no calibration.
Maximum speed: 4000rpm
Maximum torque 30Nm
Temperature monitoring: continuous temperature sensor
(KTY)
Resolver resolution: 65536 pulses/revolution
Dimensions: 275 x 210 x 210mm (WxHxD)
Weight: 6kg
ActiveServo is a program for recording characteristics of machines
and for determining dynamic and static operating points. It emulates
seven different loads (flywheel, pump, calander, lifting drive,
compressor, winding gear, arbitrarily configurable time-dependent
load) for which the parameters can be individually configured.
Features:
Measurement, calculation and display of mechanical and
electrical variables
(Speed, torque, mechanical power output, current, voltage,
active, apparent and reactive power, efficiency, power factor)
Simultaneous display of measured and calculated values
(e.g. instant display of efficiency)
Measurement of voltage and current (including RMS values
even for non-sinusoidal waveforms)
Speed or torque-controlled operation
Recording of variables over time
Programming of limiting values of speed or torque to prevent
inappropriate loading of the machine under test.
Operation in all four quadrants (display of generated torque)
Arbitrarily defined ramp functions for PC-controlled load
experiments
Display of characteristics from several experiments to better
illustrate the effect of parameter changes
Export of graphics and measurements
32-bit version for Windows
Lucas Nülle GmbH Page 10/24 www.lucas-nuelle.com
7 Rubber coupling sleeve, 1kW SE2662-6A 2
Rubber coupling sleeve for the coupling of two machines.
Permits rapid and safe assembly
Designed with internal ring gear
Material: rubber (neoprene)
Dimensions: 40 x 58 mm (length x diameter)
Weight: 0.1kg
8 Coupling guard, 1kW SE2662-6B 2
Attachable metal guard used to protect against accidental physical
contact with the coupling location where rotation occurs between two
connected machines.
Material: black steel plating, folded with function plug
Dimensions: 140 x 75 x 80mm (HxWxD)
Weight: 0.1kg
9 QuickChart, Servo-machine test stand safety and operating SO6200-7D 1
instructions (GB)
Short documentation covering the putting into operation of complex
equipment and experiment set-ups.
Terminal assignment, safety instructions, help
Circuit and assembly diagrams
Color print in DIN A3 format
Laminated: 2 x 250 µm
Media:
Pos. Product name Bestell-Nr. Anz.
10 Interactive Lab Assistant: Wind power plants with DFIG SO2800-3D 1
The experiment instructions come in the form of the Interactive
Lucas Nülle GmbH Page 11/24 www.lucas-nuelle.com
Lab Assistant course. This multimedia course is a step-by-step
guide through the field of wind power stations. The basic physics
and mechanical processes are demonstrated using easy-to-
understand animations. The Interactive Lab Assistant together
with the WindSim software forms the core elements of a user-
friendly experiment environment.
Special features:
Interactive experiment set-ups
Measured values and graphics can be stored in the
instruction section via drag and drop
WindSim software can be started directly from the
experiment instructions
Questions with feedback and evaluation logic help to
monitor progress
Print document feature available for easy hardcopy printing
of experiment instructions with solutions
CD-ROM with Labsoft browser, course software and
WindSim software
The WindSim software performs controlling operation of the
control unit of the double-feed asynchronous generator and drive
unit. Different wind speeds and profiles can be set and emulated
with this device. This imposes the same operating states onto
the generator shaft as those affecting a real wind power station.
At the same time, the software permits the control,
parameterisation and visualisation of the double-feed
asynchronous generator’s operating parameters.
Special features include:
Detailed emulation of a modern wind power station
Measurement, calculation and graphic representation of all
mechanical and electrical operating parameters (SCADA)
Automatic or manual operation
Manual and automatic synchronization with the 3-phase
electricity grid
Selection of setpoint values for active and reactive power
Definition and emulation of wind power and wind profiles
Operating with various wind forces including pitch control
Step-by-step initial setup and commissioning to
demonstrate functional operation
Export feature for graphics and measured values
Limiting the power of the wind power plant (derating)
32-bit version for Windows
Course duration 20 h approx.
Lucas Nülle GmbH Page 12/24 www.lucas-nuelle.com
11 Interactive Lab Assistant: Fault Ride-Through of wind power plants SO2800-3E 1
The experiment instructions make up an Interactive Lab Assistant
course. This multimedia course goes through the topic of "fault ride
through" for modern wind power plants step by step.
Features:
Interactive experiment set-ups
Measurements and graphics can be saved in the
experiment plans themselves via drag and drop
Questions with feedback and evaluation logic for testing
knowledge
Printable documents for easy printing of experiment
instructions complete with solutions
CD-ROM with Labsoft browser, course software and
WindSim software
The FRT software handles recording and visualisation of the
measurements.
Features:
Display of instantaneous values
Display of RMS values
Pre-set templates for desired values of active and reactive
power
Export of graphics and measurements
32-bit version for Windows
Course duration 16 h approx.
Lucas Nülle GmbH Page 13/24 www.lucas-nuelle.com
Power supply:
Pos. Product name Bestell-Nr. Anz.
12 Universal power supply for electrical machines CO3212-5U 1
Power supply for DC, AC and three-phase current and for excitation of
synchronous machines. The supply is specially designed for use
with electrical machines.
Outputs:
Three phase: L1, L2, L3, N from 4-mm safety sockets
DC: 0...240VDC variable, controlled and electronically
protected against overload and short circuits.
Output current: 3...10A (adjustable current limiting)
Second DC supply ca. 210VDC, 6A fixed
Protective systems:
Motor protection switch adjustable from 6.3...16A
Undervoltage trip
Safety cut-out
Power connection: 3x 230/400V, 50/60Hz via CEE plug with
1.8m power lead
Dimensions: 297 x 228 x 140mm (HxWxD)
Weight: 3kg
Lucas Nülle GmbH Page 14/24 www.lucas-nuelle.com
Measuring instruments:
Pos. Product name Bestell-Nr. Anz.
13 Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z 1
The areas of electrical machines, power electronics and drive
technology pose particular problems for measuring instruments. In
addition to high-performance overload protection, the acquisition of
measurement values must be performed accurately independently of
the curve's shape. The universal measuring device has been
designed particularly to satisfy these requirements. It can
simultaneously replace as many as four different measuring
instruments – constituting a current/voltmeter, power and phase-
angle meter all in one. The graphic display allows for both student as
well demonstration experiments. The VI Starter software included
allows for visualisation of measurements on a PC.
Simultaneous, measurement of voltage and current
independent of the curve shape (max. 600 V, 20 A)
(measurement of clocked voltages)
Calculation of active, apparent and reactive power as well as
the power factor
Measurement of the total rms (RMS-AC+DC), AC rms (RMS-
AC) and arithmetic mean (AV-AC+DC)
Impervious to electrical damage up to 20 A/600 V
Large-scale, high-contrast background-illuminated graphic
display (5.7")
Large-scale display or display of up to 4 measurement values
Digital or pseudo-analog display
USB interface
Internal resistance: current path 10 mΩ, voltage path 10 MΩ
Voltage ranges: 30, 300, 600 V
Current ranges: 1, 10, 20 A
Measurement accuracy: 2%
Automatic or manual measurement range selection
Demonstration test instrument for measuring properties of
the electricity supply
Operating voltage: 230V, 50/60Hz
Dimensions: 297 x 228 x 140mm (HxBxT)
Weight: 2kg
The VI Starter software allows all the measurements to be displayed
on the PC. Up to 17 different displays can be opened.
Oscilloscope display of voltage, current and power
Consumption meter to display power consumed and output
Data logger for 14 different variables
Data export for data logger
Characteristic recorder
Labview driver and supplied examples
32-bit version for Windows
Lucas Nülle GmbH Page 15/24 www.lucas-nuelle.com
Accessories:
Pos. Product name Bestell-Nr. Anz.
14 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 40
Moulded insulation
both sides with touch protection (safety plug + safety sockets),
distance 19mm
transition resistance max. 6mΩ
rated data: 1000V/32A CAT II
colour black
15 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 4
1000V/32A CAT II
Moulded insulation
both sides with touch protection (safety plug + safety sockets),
distance 19mm
transition resistance max. 6mΩ
rated data: 1000V/32A CAT II
colour green/yellow
16 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Moulded insulation
both sides with touch protection (safety plug + safety sockets),
distance 19mm
transition resistance max. 6mΩ
rated data: 1000V/32A CAT II
colour blue
Lucas Nülle GmbH Page 16/24 www.lucas-nuelle.com
17 Set of safety measurement cables, 4mm (31 leads) SO5148-1L 1
Safety measurement cables with 4mm safety plugs, coloured,
PVC insulation, highly flexible
Each set includes the following:
6x 25cm long, black
4x 50cm long, black
2x 100cm long, blue
2x 100cm long, red
1x 100cm long, green/yellow
1x 150cm long, blue
1x 150cm long, green/yellow
2x 150cm long, green
4x 150cm long, brown
4x 150cm long, black
4x 150cm long, grey
Wire cross section 2.5 mm²
Capacity/category: 600V CAT II, 32A
Lucas Nülle GmbH Page 17/24 www.lucas-nuelle.com
18 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
High-quality, mobile experiments stand from the SybaPro range
for demonstrations and experiments. Features aluminium profile
legs compatible with all add-ons and extensions for the SybaPro
system.
The mobile experiment stand is supplied in kit form and needs to
be assembled by customers themselves.
Table top:
30-mm table top made of highly compressed, multi-layer
fine chipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured
laminate coating (Resopal) on both sides, conforming to
DIN 16926
Resistant to many chemicals and reagents including
dilute acids and alkalis
Resistant to heat, e.g. molten solder or heating at specific
points such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging
made of 3mm thick RAL 7047 coloured plastic
Coating and adhesive are PVC free
Power strip with 6 outlet sockets mounted underneath the
table top, lead and earthed plug
Frame:
2 extruded aluminium profiles with multiple grooves 1800 x
120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3
on each side and 1 each on the front and back)
Grooves accommodate standard industrial mountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layer
organisation of DIN A4 panels
Space for extension of power supply duct
Base made of rectangular tubing with 4 swiveling double
casters, 2 of which have brakes
Table frame made of tough combination of rectangular
tubing around the full perimeter
Acid-resistant epoxy-resin coating, 80 µm thick (approx.),
colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1995 x 700 mm (WxHxD)
Lucas Nülle GmbH Page 18/24 www.lucas-nuelle.com
19 Protected power distribution for working stations ST8008-8M 1
400-V CEE distribution panel with automatic circuit breakers for
attachment to profiles on experiment trolleys or direct to table-top.
2 CEE sockets (400 V, 16 A, 5-pole) with safety flap
1 Socket outlet with earth (230 V) plus safety flap
Circuit breaker: 1 x 3-pole line circuit breaker, type B, 16 A
Power connection: 3 x 230/400 V, 50/60 Hz via CEE plug, 4-m
power lead
Dimensions: 530 x 130 x 110 mm (HxWxD)
Weight: 3 kg
20 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1
Accommodates about 48 safety measuring leads (4mm), suitable for
mounting on walls or aluminium profiles
Width 200 mm, 12 guide grooves for leads
Adjustable height for mounting on aluminium profiles
Can be mounted on the left or right
Can be mounted on walls
Includes 2 screws and tenon blocks
Acid-resistant epoxy-resin powder coating, thickness 80 µm
approx., colour RAL 7047
21 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched with
holes, suitable for all furniture in the SybaPro aluminium profile
range
Adjustable assembly height
Adjustable width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assembly (4 bolts and 4
tenon blocks)
Acid-resistant epoxy-resin powder coating, 80µm thick
approx., colour RAL7047
Lucas Nülle GmbH Page 19/24 www.lucas-nuelle.com
22 Monitor holder for flat screen monitor of weight up to 15kg / 33lbs ST8010-4T 1
Pivoting monitor holder for attachment to aluminium profiles of
furniture in the SybaPro range. Allows a monitor to be placed in
the optimum position so that work and experiments are less
tiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extruded
aluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 15kg / 33lbs
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and
480mm
Additionally included:
Cable management set for installing cables along the profiles of the
aluminium lab system furniture in the SybaPro range, consisting of:
3 Cross cable binders for front and rear grooves of aluminium
profile
3 Cross cable binders for side grooves of aluminium profile
12 Cable binders
4 Aluminium cover profiles for covering and enabling wires to
be run along the grooves of an aluminium profile
23 Keyboard adapter for flat screen monitor holders ST8010-4G 1
Keyboard adapter for use in combination with flat screen monitor
holders
Mounted between monitor and mount for flat screen monitor
holder
Variable 3-level height adjustment via multiple pre-drilled
mounting holes
Two rows of mounting holes for use with equipment meeting
VESA 75 and VESA 100 standards
Keyboard shelf inclined by about 30° for comfortable and
ergonomic usability
Keyboard shelf with 11-mm folded edging to prevent falling,
including handle
Variable 2-level depth attachment for keyboard shelf (252/276
mm)
Extra-wide keyboard shelf (640 mm) can accommodate a
mouse as well
Depth of keyboard shelf 172 mm
Includes two cable clips for guiding and bundling cables
Maximum load 10 kg
Dimensions (HxWxD) 360 x 640 x 276 mm
Lucas Nülle GmbH Page 20/24 www.lucas-nuelle.com
24 Protection cover for three-level experiment trolleys ST8010-9Y 1
Dust cover for three-level experiment trolleys
For protecting equipment from dust and damp
For keeping equipment out of sight (the cover must not be
transparent, so is therefore opaque)
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resistant to tearing, impregnated to be washable and
waterproof
Recommended learning management software for all LN multimedia courses:
Optionally available: multi user license with 5 or 10 dongles and update to version 4.0
Pos. Product name Bestell-Nr. Anz.
25 LabSoft Classroom Manager 4.0 software suite, single license SO2001-5A 1
Lucas Nülle GmbH Page 21/24 www.lucas-nuelle.com
LabSoft Classroom Manager is a comprehensive set of
administration software for the UniTrain system and all LabSoft
courses. Classroom Manager comprises the following
independent program components:
LabSoft Manager: Administration of students and courses in
LabSoft
LabSoft Reporter: Student reports and statistics
LabSoft Editor: Creation and editing of courses and tests
LabSoft Questioner: Creation of questions, measuring
exercises and sets of questions for courses and tests
LabSoft TestCreator: Automatic generation of tests on the
basis of sets of questions
Features:
Ease of use of all programs thanks to graphical user interface
in all component programs
For use in local area networks or on stand-alone PC
Ease of installation
No additional database software required
Access control via USB dongle
Available languages: DE, EN, ES, FR, RU, PT, ZH, LO
LabSoft Manager:
Administration of LabSoft network installation
Administration of an unlimited number of students and
courses in LabSoft
Addition, deletion and editing of courses and tests in LabSoft
Addition, deletion and editing of students and student data
Addition, deletion and editing of student groups (classes)
Assignment of students to classes
Assignment of courses and tests to students or classes
LabSoft Reporter:
Electronic monitoring of student progress
Graphical presentation of progress in courses and tests
Presentation of student or group results
Reports on courses, tests, single users or classes
Summary of results and time
Calculation of average results for groups
Multiple search options for students, classes, courses or
tests
LabSoft Editor:
HTML editor for easy to use editing of LabSoft courses
Editing of course pages
Wizard for creation of new courses and course pages
Lucas Nülle GmbH Page 22/24 www.lucas-nuelle.com
Automatic inclusion of new courses in an existing LabSoft
installation
Automatic creation of IMS-compatible navigation tree without
the need for programming knowledge
Moving course pages within the navigation tree at the click of
a mouse
Editing in WYSIWYG mode
HTML view and page preview
Insertion of graphics, animations and tables
Insertion of test questions
Page templates for a variety of page types
LabSoft Questioner:
Program for creating and editing questions, practical
measuring exercises and sets of questions (question files)
for electronic evaluation
Easy creation of exercises and questions for courses and
tests
7 different types of question: single and multiple choice,
missing text, assignment, matrices, arbitrary text, selection of
images
Ability to input meta data (points, time for questions, difficulty,
required resources, etc.)
Easy specification of tolerances for practical measuring
exercises
LabSoft TestCreator:
Program for automatically creating electronic tests from sets
of questions (question files)
Automatic and manual selection of questions and measuring
exercises
Filter functions (e.g.: type of question, difficulty) for pre-
selection of questions
Automatic generation of tests according to a set time or
number of questions
Various test options: arbitrary order of questions in a test,
immediate display of results after completion
Automatic registration of tests in LabSoft
Preview function showing the test as created
Includes:
CD-ROM with LabSoft Classroom Manager
1 USB-dongle for operation of program
System requirements:
Server or PC with Windows Vista, 7, 8 or 8.1
Microsoft Internet Explorer 7.0 or higher
Minimum 100 MB free disk space
1 free USB-port for USB-dongle
Lucas Nülle GmbH Page 23/24 www.lucas-nuelle.com
26 Collection of assignments Power Engineering / Renewable SO2001-6D 1
Energies
Collection of electronic assignments questions and measuring
exercises for the UniTrain courses on the topic of electrical power
engineering and renewable energies. With the help of Labsoft
TestCreator, these questions and measuring exercises can easily
be assembled into electronic tests. The tests can then be carried out
in LabSoft.
A total of some 200 questions and measuring exercises for
the UniTrain courses on the topics of Photovoltaics, Fuel cell
technology, Transient processes in AC and DC networks and
the multimedia course Small wind power plant
About 25% are practical exercises to be carried using the
training systems in order to test handling skills and practical
abilities
About 30% are newly assembled questions previously
contained in the courses
It is possible to extend the collection with your own questions
and assignments
Other collections can be imported
All questions and assignments can be edited
6 different types of questions (single choice, multiple choice,
missing text, matching, matrix matching and image choice)
Extensive metadata for all questions and assignments to
make it easier to create tests (degree of difficulty, points, topic
area, time to complete, type of question, training systems
needed for practical exercises)
Lucas Nülle GmbH Page 24/24 www.lucas-nuelle.com
