AUTHORIZATION TO MARK
This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s)
Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing
Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report.
This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be
applied only at the location of the Party Authorized To Apply Mark.
Applicant: VTS AMERICA Inc. Manufacturer: VTS America Inc.
1650 Horizon Parkway NE, Suite 100 1650 Horizon Parkway NE, Suite 100
Address: Address:
Buford, Georgia, 30518 Buford, Georgia, 30518
Country: USA Country: USA
Contact: Mr. Felipe Niada Contact: Mr. Felipe Niada
Phone: 470 809 6811, ext. 1005 Phone: 470 809 6811, ext. 1005
FAX: 470 806 6815 FAX: 470 806 6815
Email: Felipe.Niada@vtsgroup.com Email: Felipe.Niada@vtsgroup.com
Party Authorized To Apply Mark: Same as Manufacturer
Report Issuing Office: Dallas, TX
Control Number: 4009808 Authorized by:
for Thomas J. Patterson, Certification Manager
This document supersedes all previous Authorizations to Mark for the noted Report Number.
This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited
to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use
of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is restricted to the
conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in
writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the
purposes of production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing Services NA Inc.
545 East Algonquin Road, Arlington Heights, IL 60005
Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672
Heating and Cooling Equipment UL 1995, 4th ED. issued 2011/10/14, revised 2014/10/03
Standard(s):
Heating and Cooling Equipment CSA C22.2 #236-11, 4th ED. issued 2011/10/14
Product: Air conditioning appliance for ventilation, cooling or/and heating, with or without energy recovery system
Brand Name: VTS
BVS or AVS - XX - L or R - B*(v)
Where XX can be 8, 12,16, 20, 30, 40, 55, 65, 85, 100, 130, 170, 230, 300, or 380
Models:
Where B is the base function of the unit which could be F, V, C, H, M, Pcr, R or a combination
of all of these letters together.
Where (v) indicates vertical type AHU which is blank if horizontal type AHU
ATM for Report 102078468DAL-001 Page 1 of 1 ATM Issued: 4-Nov-2015
ED 16.3.15 (1-Jan-13) Mandatory
