Scribd
Upload
371 views2 pages

Item 346 Block Valve - 3 Sections

This engineering sheet provides specifications for a modular valve manifold with a solenoid valve unit and integrated ball valve for a customer. The valve has dimensions of 500 x 110 x 100 mm, connects to G1" tube for inlet and outlet, and G1/2" tube for drain/test. It can handle water with a maximum pressure of 25 bar and temperature of 120°C. Key components are made of anodized aluminum, brass, stainless steel, and NBR or Viton materials. The solenoid coil operates at 220-230V, 50/60Hz and has a holding power of 10W. The sheet also provides instructions for manually opening the valve unit.

Uploaded by

AlexDor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
371 views2 pages

Item 346 Block Valve - 3 Sections

This engineering sheet provides specifications for a modular valve manifold with a solenoid valve unit and integrated ball valve for a customer. The valve has dimensions of 500 x 110 x 100 mm, connects to G1" tube for inlet and outlet, and G1/2" tube for drain/test. It can handle water with a maximum pressure of 25 bar and temperature of 120°C. Key components are made of anodized aluminum, brass, stainless steel, and NBR or Viton materials. The solenoid coil operates at 220-230V, 50/60Hz and has a holding power of 10W. The sheet also provides instructions for manually opening the valve unit.

Uploaded by

AlexDor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Item 346

Engineering Sheet
Customer: York Fire Fighting Danfoss A/S
Valve type: Modular Valve Manifold Industrial
Controls Division
Danfoss code number: 032U5461
Customer code number: 918946-0 Albuen 29
D K-6000 Kolding,
Denmark
CVR nr.: 20 16 57 15

Phone: +45 7635 6565


Fax: +45 7635 6598

Dimensions in mm

Technical data
Valve: Valve type Manifold solution w. solenoid valve unit and
integrated ball valve for drain/test
Dimensions 500 x 110 x 100 mm
Inlet connections G1” tube
Drain/Test connection G1/2” tube
Outlet connection G1”
Medium Water
Max. test pressure 25 bar
Max. opening differential pressure 16 bar
Min. opening differential pressure 0.3 bar
Kv-value 8.5 m 3/h
Max. medium temperature + 120°C
Min. medium temperature - 30°C
Material: Body Anodized aluminium
Internal parts Brass/Stainless steel
Diaphragm NBR
O-rings NBR/Viton

Kolding, 15/09/2005 Page 1 /2

Morten Jensen, Design Engineer Filename: 032U5461.doc


Engineering Sheet
Danfoss A/S
Industrial
Controls Division
Albuen 29
D K-6000 Kolding,
Denmark
CVR nr.: 20 16 57 15

Phone: +45 7635 6565


Fax: +45 7635 6598

Coil: Coil type BB230CS


Voltage 220-230 V, 50/60 Hz.
Voltage tolerance + 10% / - 15%
Power consumption: Holding 10 W
Max. ambient temperature + 50°C
Duty rating Continuous (100%)

Instructions for manuel opening unit to servo


controlled solenoid valve.

Function: Turning the operating screw


counter-
clockwise opens the pilot of the unit and
thereby
opens the solenoid valve main orifice for full
flow.
The valve remains open until the operating
screw
is turned clockwise. This closes the pilot
orifice and,
subsequently, the main orifice.
One full turn of the operating screw is
sufficient
to open and close the valve.

Kolding, 15/09/2005 Page 2 /2

Morten Jensen, Design Engineer Filename: 032U5461.doc

You might also like