234 API STANDARD 521
[225] W. H. Smolen, Petroleum Processing, Volume 6, Number 9, 1951, pp. 978–982
[226] E. J. Stankiewicz, Combustion, Volume 26, Number 8, February 1955, pp. 51–55
[227] R. S. Steinbock, Chemical Engineering, Volume 59, Number 2, 1952, pp. 202–203
[228] R. S. Steinbock, Chemical Engineering, Volume 59, Number 3, 1952, pp. 144–147
[229] R. S. Steinbock, Chemical Engineering, Volume 59, Number 4, 1952, pp. 154–155
[230] J. F. Straitz III, “Improved Flare Design,” Hydrocarbon Processing, October 1994
[231] U.S. Environmental Protection Agency, Compilation of Air Pollutant Emissions Factors, Vol. 1, Stationary
Point and Area Sources, AP-42, Fourth Edition, 1985 and Supplement F: Section 11.5, 9/91, “Industrial
Flares”
[232] W. R. Wichmann, A. G. Hopper, and J. L. Mershon, Local Stresses in Spherical and Cylindrical Shells due
to External Loadings, Welding Research Council
[233] A. Youness, “New Approach to Tower Deflection,” Hydrocarbon Processing, June 1969, pp. 121–126
[234] J. Wilkins, et al., The Design, Development and Performance of Indair and Mardair Flares, Paper 2822,
Offshore Technology Conference, May 2–5, 1977, Houston, Texas
Flashing Flow in Pipes
[235] R. J. Anderson and T. W. F. Russell, Chemical Engineering, Volume 72, Number 25, December 6, 1965,
pp. 139–144
[236] R. J. Anderson and T. W. F. Russell, Chemical Engineering, Volume 72, Number 26, December 20, 1965,
pp. 99–104
[237] R. J. Anderson and T. W. F. Russell, Chemical Engineering, Volume 73, Number 1, January 3, 1966, pp.
87–90
[238] O. Baker, Oil and Gas Journal, Volume 53, Number 12, July 26, 1954, pp. 185–190, 192, 195
[239] O. Baker, Oil and Gas Journal, Volume 56, Number 45, November 10, 1958, pp. 156–157, 159–161, 163,
165, 167
[240] O. Baker et al., AGA/API Report NX-28, October 1970
[241] J. A. Chavez, Oil and Gas Journal, Volume 57, Number 35, August 24, 1959, pp. 100–102
[242] J. M. Chenoweth and M. W. Martin, Petroleum Refiner, Volume 34, Number 10, 1955, pp. 151–155
[243] J. Coates and B. S. Pressburg, Chemical Engineering, Volume 66, Number 18, September 7, 1959, pp.
153–154
[244] A. E. Dukler, M. Wicks III, and R. G. Cleveland, American Institute of Chemical Engineers Journal, Volume
10, Number 1, 1964, pp. 38–51
[245] K. E. First and J. E. Huff, Design Charts for Two-Phase Flashing Flow in Emergency Pressure Relief
Systems, paper presented at AIChE International Symposium on Runaway Reactions, March 7–9, 1989
[246] O. Flanigan, Oil and Gas Journal, Volume 56, Number 10, March 10, 1958, pp. 132–133, 136, 140–141
[247] O. Flanigan, Oil and Gas Journal, Volume 57, Number 49, November 30, 1959, pp. 60–66
[248] J. C. Leung, “A Generalized Correlation for One-Component Homogeneous Equilibrium Flashing Choked
Flow,” AIChE Journal, Volume 32, Number 10, October 1986
