0% found this document useful (0 votes)
46 views3 pages

H835ADLE Datasheet: Quick Spec

The H835ADLE board is a 32-channel ADSL2+ over POTS service board that provides ADSL2+ connectivity. It supports up to 600 Mbps downstream bandwidth and 32 POTS ports. The board has built-in 600-ohm splitters and supports standards including ADSL, ADSL2, ADSL2+ and G.998 bonding. It provides interfaces for 32 ADSL2+ ports and 32 POTS ports.

Uploaded by

mazen ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
46 views3 pages

H835ADLE Datasheet: Quick Spec

The H835ADLE board is a 32-channel ADSL2+ over POTS service board that provides ADSL2+ connectivity. It supports up to 600 Mbps downstream bandwidth and 32 POTS ports. The board has built-in 600-ohm splitters and supports standards including ADSL, ADSL2, ADSL2+ and G.998 bonding. It provides interfaces for 32 ADSL2+ ports and 32 POTS ports.

Uploaded by

mazen ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

H835ADLE Datasheet

Get a Quote

Overview
The H835ADLE board is a 32-channel ADSL2+ over POTS service board, supporting 600-ohm built-in splitters. Using its ADSL2+ ports, the
H835ADLE board works with the ADSL terminal unit-remote end (ATU-R) to provide 32-channel ADSL2+ services.

Quick Spec
Table 1 shows the quick spec.

Model H835ADLE

Connector Champ 64-pin

Built-in splitter 600 ohms

2000 bytes (CCUC, or CCUE)


Maximum frame size
1900 bytes (with CCUB)

Product Details
H835ADLE provides these benefits:

· Provides a downstream rate of 600 Mbit/s.

· Supports single-ended loop tests (SELTs).

· Supports board power shutdown.

H835ADLE provides these external interfaces:

· 32 POTs ports

· 32 ADSL2+ ports:

- G.992.1 (ADSL)

- G.992.3 (ADSL2)

- G.992.5 (ADSL2+)

- G.997.1 (physical layer management)

- G.998.1 (ATM-based multi-pair bonding)

- G.998.4 (INP for DSL)

Compare to Similar Item


Table 2 shows the comparison.

Model H832SHLH H835ADLE

Connector Champ 64-pin Champ 64-pin

Built-in splitter None 600 ohms

Maximum frame size ATM: 2000 2000 bytes (CCUC, or CCUE)


PTM: 1594 1900 bytes (with CCUB)

Get More Information


Do you have any question about the H835ADLE?

Contact us now via Live Chat or sales@router-switch.com.

Specification
Specification

H835ADLE Specification

Connector Champ 64-pin

Built-in splitter 600 ohms

2000 bytes (CCUC, or CCUE)


Maximum frame size
1900 bytes (with CCUB)

Operating temperature -40°C to +65°C

Static: 6 W
Power consumption Typical: 19 W
Maximum: 33 W

Automatic shutdown at a high


Supported
temperature

Power-on and power off through the


Supported
CLI

G.992.1 Annex A
Annex G.992.3 Annex A/L/M
G.992.5 Annex A/M

Bonding 2, 4, 6, or 8 pairs

SRA Supported

RFI notch Supported

G.INP Supported

INM Supported

Built-in MELT Not supported

Built-in SELT Supported

Supported
IPv6
(Not supported when CCUB is used.)

1:1 VMAC Supported

DPBO Supported

Download Resource

Support and Resources

Huawei SmartAX MA5616 MDU and Board Datasheet

Want to Buy

Order Now Get a Quote

Why Router-switch.com
As a leading network hardware supplier, Router-switch.com focuses on original new ICT equipment of Cisco,
Huawei, HPE, Dell, Hikvision, Juniper, Fortinet, etc.

16,000+ 200+ $20,000,000 50%-98% 100%


Customers Trusted Countries we Sold Inventory Available Off Global List Price Safe Online Shopping

Contact Us
● Tel: +1-626-239-8066 (USA) +852-3050-1066 / +852-3174-6166
● Fax: +852-3050-1066 (Hong Kong)
● Email: sales@router-switch.com

You might also like