Scribd
Upload
132 views1 page

Excela-Flo: First Stage / High Pressure Industrial Regulators

The MEGR-1627 Series is a high-capacity, high-pressure industrial regulator suitable for use in jurisdictional systems, grain dryers, and other applications. It has a maximum inlet pressure of 250 PSI and can regulate pressure from 15 to 40 PSIG or 5 to 20 PSIG, depending on the model. The diaphragm case and regulator body can rotate in four positions for installation in space-limited areas. Models are available with an integral monitor or relief valve.

Uploaded by

David
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views1 page

Excela-Flo: First Stage / High Pressure Industrial Regulators

The MEGR-1627 Series is a high-capacity, high-pressure industrial regulator suitable for use in jurisdictional systems, grain dryers, and other applications. It has a maximum inlet pressure of 250 PSI and can regulate pressure from 15 to 40 PSIG or 5 to 20 PSIG, depending on the model. The diaphragm case and regulator body can rotate in four positions for installation in space-limited areas. Models are available with an integral monitor or relief valve.

Uploaded by

David
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Excela-Flo

FIRST STAGE / HIGH PRESSURE INDUSTRIAL REGULATORS


MEGR-1627 SERIES

APPLICATION:
The MEGR-1627 Series commercial/industrial regulator is a large capacity, high pressure unit for use in conjunc-
tion with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service.
The diaphragm case and/or regulator body on the MEGR-1627 Series can be rotated in any of four positions
to allow installation in locations with limited space. Available with a monitor or integral relief valve. The
MEGR-1627 Series is perfectly suited for jurisdicƟonal systems, grain dryers, direct fired vaporizers or other
high capacity service applicaƟons.

SPEC
SP
SPECIFICATIONS:
ECIF
IFIC
ICAT
ATIO
IONS
NS::
MEGR-1627
Type: Adjustable/PSI
Series
Orifice Diameter: 3/8” or 1/2”
Orifice Material: Aluminum
Max. Inlet Pressure: 250 PSI
Regulator Spring: Steel
Stem Guide/Disk Holder: Stainless Steel
Valve Stem: Steel
Exterior Finish: Gray Powder Coat Diaphragm:
Bonnet Cap & Housing / Body Material: Fabric Reinforced Nitrile (NBR)
LisƟngs: UL LISTED / UL 144
Temp. Range: -20° F. / 180° F. (“V” Versions 0° F/ 200° F)

PSIG PSIG BTU/H LPG @ BTU/H LPG @


Part No. Description Inlet/Outlet Orifice Outlet Set Point Outlet Range Monitor 100 PSI Inlet 20 PSI Inlet
MEGR-1627/497 1” FNPT 1/2” 20 15-40 No 36,600,000 6,050,000
MEGR-1627/576 2” FNPT 1/2” 10 5-20 No 45,000,000 6,003,000
MEGR-1627/5810 3/4” FNPT 3/8” 10 5-20 No 11,700,000 4,700,000
MEGR-1627V/5810* 3/4” FNPT 3/8” 10 5-20 No 11,700,000 4,700,000
MEGR-1627/6210 First Stage 3/4” FNPT 1/2” 10 5-20 No 12,400,000 6,700,000
MEGR-1627/7710 High Pressure 1” FNPT 1/2” 10 5-20 No 25,100,000 6,900,000
Regulator
MEGR-1627M/267 2” FNPT 1/2” 10 5-20 Yes 36,100,000 6,003,000
MEGR-1627M/471 1” FNPT 1/2” 10 5-20 Yes 25,100,000 6,900,000
Token
MEGR-1627R/113 3/4” FNPT 3/8” 10 5-20 9,800,000 4,200,000
Relief
MEGR-1627V/7710* 1” FNPT 1/2” 10 5-20 No 25,100,000 6,900,000
* “V” suffix indicates flurocarbon trim for high temperature applications such as vaporizers
NOTE: Other configurations and materials availalble upon request.

For Your Local Marshall Excelsior Distributor Call 269-789-6700,


Fax 269-781-8340 or E-mail: sales@marshallexcelsior.com
www.marshallexcelsior.com

You might also like