Scribd
Upload
38 views1 page

Inspection Form: Lanyard: Frequency of Inspection in The Following Categories: Look at

The document provides an inspection form for personal fall arrest systems like lanyards. It details the inspection process that must be done by the user before each use and by a competent person at least annually, including what to look for in hardware, webbing, stitching, and labels to determine if removal from service is needed.

Uploaded by

Zeck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Inspection Form: Lanyard: Frequency of Inspection in The Following Categories: Look at

The document provides an inspection form for personal fall arrest systems like lanyards. It details the inspection process that must be done by the user before each use and by a competent person at least annually, including what to look for in hardware, webbing, stitching, and labels to determine if removal from service is needed.

Uploaded by

Zeck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION FORM: Lanyard

OHSA 1926.502(d)(21)
Personal fall arrest systems SHALL be inspected prior to each use for wear, damage, and other
deterioration, and defective components SHALL be removed from service.

6.1 Inspection
6.1.1 Equipment SHALL be inspected by the user before each use and, additionally, by a
competent person other than the user at intervals of no more than one year.

FREQUENCY OF INSPECTION IN THE FOLLOWING CATEGORIES: LOOK AT:


General Industry: Construction: 1 Hardware 2 Webbing
Your Organization: Manufacturer: 3 Stitching 4 Labels/Tags

MANUFACTURER OF EQUIPMENT: LOOK FOR:


Name of Manufacturer:
Serial #: Model #: 1 HARDWARE
Date of Manufacture: ___/___/___ Rust/corrosion
Deformed/bent
INSPECTION: REMOVE FROM SERVICE WHEN: Burs/cracks
Date: ___/___/___ Date: ___/___/___ Weld spots/slag
Missing rivets
NAME OF COMPETENT PERSON: Springs
Functionality
NAME OF USER (AUTHORIZED PERSON):
Other

2 WEBBING
Cuts/burns/holes
Excessive wear
Excessive UV damage
Chemical attack
Writing on the webbing
Other

3 STITCHING
Missing
Loose
Broken
Other

4 LABELS/TAGS
Missing
Illegible
Dates
Other

PASS FAIL

You might also like