CERBERUS

Well Intervention Simulation for Capillary String Installation

Project : TN-ML5 Capillary String

Prepared by : Risal Rahman Well : TN-ML5

For : TOTAL E&P INDONESIE CT : ML5 Trial (0.500 x 0.035)
Client company : BHA : None selected
Simulation date : March 17, 2011 Disconnect : None selected
Comments :

These results are for the use of the authorized Cerberus Licensee and their client(s) only, subject to any Agreement existing between the
Parties, and subject also to the Terms and Conditions of the Cerberus License Agreement.

Summary

A1 The job can probably be performed with the current input parameters.*

500

1000

1500

2000

2500

3000
3607.0
3500
0
500
1000

2888.4 Well name : TN-ML5

Total depth : 3607.0 m
Max inclination : 4.0° at 2175.0 m
3365.0 Max DLS : 1.959 deg/100 ft at 1001.0 m
3379.0 Min ID : 2.250 in at 3370.1 m
3410.0 WHP : 333 psi
3603.0
3607.0

Well Intervention Simulation Project : TN-ML5 Capillary String

TM Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
 Reaching Depth

RIH and POOH

between 0.0 m and 3607.0 m
-1000 -500 500 1000 1500 2000 2500 Legend 2 4 6 8 10 12 14 16 18 20
RIH
POOH
Inclination
DLS X 10

1000 1000
Depth (m)

Depth (m)
2000 2000

3000 3000

4000 4000
Surface Weight (lbf) Inclination(°) & DLSx10(°/100ft)
B1 RIH: CT and BHA can reach the target depth of 3607.0 m
- no lockup detected
- pipe yield limit not exceeded
- pipe collapse limit not exceeded
- BHA stress limit not exceeded
- no catastrophic buckling detected
B2 POOH: CT and BHA can be retrieved to surface from the target depth of 3607.0 m
- pipe yield limit not exceeded
- pipe collapse limit not exceeded
- BHA stress limit not exceeded

Tractor Requirements
TR1 No tractor pull is needed for the BHA to reach target depth of 3607.0 m with the current input parameters.

Workstring Status
T6 The maximum workstring* OD is 0.500 in, and minimum well ID is 2.250 in at 3370.1 m.
The minimum workstring clearance is 0.875 in either side, or 1.750 in total.
(*CT and BHA)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Working at Depth

Calculations at 3607.0 m
MD1 The maximum available pick-up at 3607.0 m based on 80% of yield strength is 330 lb.
The weight indicator reading will then be 2711 lb.
MD3 The maximum set-down force at 3607.0 m is -46 lbf at the end of the string.
The weight indicator reading will be 655 lbf on surface.

-500 500 1000 1500 2000 2500 Legend

Max pull at 80%
pipe yield
Max set-down
before lock-up

1000
Depth (m)

2000

3000

4000
Maximum Overpull and Set-down at BHA (lbf)

MD4 CT stretch during steady RIH at 3607.0 m is 5.53 m

CT stretch during steady POOH at 3607.0 m is 6.35 m

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Variation of Set-Down Force with Surface Weight at 3607.0 m

640 660 680 700 720 740 760 780 800 820 840

-10
Set-Down Force (lbf) at 3607.0 m

-20

-30

-40

-50
Surface Weight (lbf)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Workstring

CT Properties

0 4572.0 m
ML5 Trial

Length : 4572.0 m Weight (empty) : 2607.3 lb

Diameter : 0.500 in Weight (water-filled) : 3549.9 lb
Wall : 0.035 in Volume : 113.2 gal
Yield strength : 80.0 kpsi Displacement : 153.0 gal

CT Limits

10000
Legend
Differential Pressure (psi) at 0.0 m

8000
von-Mises (80%)
6000
4000
2000 Ovality: 2%
Collapse model: <none>
-3000 -2000 -1000 1000 2000 3000
-2000
-4000
-6000
-8000
-10000
RIH Axial Force (lbf) at 0.0 m

10000
Differential Pressure (psi) at 0.0 m

8000
6000
4000
2000

-3000 -2000 -1000 1000 2000 3000

-2000
-4000
-6000
-8000
-10000
POOH Axial Force (lbf) at 0.0 m

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Contingencies

Working Beyond the Total Depth

ER1 With the well continuing at .5° inclination and 25.8° azimuth, the CT would not lockup even when deployed to its full length of
4572.0 m. If CT length was not a factor, and assuming a surface wall thickness of 0.035 in, yield would eventually occur at depth
of 7091.2 m.

Legend
The result indicates conditions that will probably prevent the job being performed.
The result is marginal or calls for special attention.
The result falls within the desired range.
The result is for information only and does not affect the project status.
A warning condition was detected but not included in the project status.
A caution condition was detected but not included in the project status.
The result was within the desired range, but not included in the project status.
The calculation is not applicable to the present scenario, or was excluded by the user.

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (1)

-1000 1000 2000 3000 Legend

Lockup
RIH
POOH
1000
80% Yield Strength
Depth (m)

2000

3000

4000
Surface Weight (lbf)

-500 500 1000 1500 2000 2500 Legend

RIH
POOH

1000 80% Yield Strength

Depth (m)

2000

3000

4000
BHA Connector Tension (lbf)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (2)

1 2 3 4 5 6 7 Legend
RIH
POOH

1000
Depth (m)

2000

3000

4000
Stretch (m)

0.002 0.004 0.006 0.008 0.01 0.012 Legend

Required Pull

1000
Depth (m)

2000

3000

4000
Minimum Tractor Pull Required (lbf)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (3)

1000 2000 3000 4000 5000 6000 Legend

CT - RIH
CT - POOH
Annulus - RIH
1000 Annulus - POOH
Depth (m)

2000

3000

4000
Pressure (psi)

1 2 3 4 5 6 7 8 9 10 Legend
RIH
POOH

1000
Depth (m)

2000

3000

4000
Wall Contact Force (lbf/ft)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (4)

-500 500 1000 1500 2000 2500 Legend

Helical Buckling Load
Axial Force - RIH
Axial Force - POOH
1000
Depth (m)

2000

3000

4000
Axial Effective Force (lbf)

10 20 30 40 50 Legend
Stress - RIH
Stress - POOH

1000
Depth (m)

2000

3000

4000
Stress (kpsi)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (5)

5 10 15 20 25 30 Legend
Annular Flow
CT Flow

1000
Depth (m)

2000

3000

4000
Flow Velocity during RIH (ft/min)

1 2 3 4 5 Legend
Annular Flow
CT Flow

1000
Depth (m)

2000

3000

4000
Flow Velocity during POOH (ft/min)

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Input Data

Measured Depth : 3607.0 m

RIH POOH
CT Speed : 75.0 75.0 ft/min
Stripper Friction : 500 500 lbf
Reel Back Tension : 150 150 lbf
Delta Pressure Downhole : 0 0 psi
Wellhead Pressure : 333 333 psi
Liquid Flowrate : 0.0 0.0 gal/min
Force On End : 0 0 lbf

Max. Calculation Length : 30.5 m Ovality : 2.0 %

Percentage Error : 0.01 Collapse Model : Ignore Collapse
Yield Safety Factor : 80 % Collapse Safety Factor : 80 %
Eccentricity : 0.75 Gooseneck Radius : 0 in
Tool Model : 1 Include Tool : No
Use Roughness : Yes Pressure Calculation : Circulating
Pipe Roughness : 0.00186 Include Cable : No
Annular Roughness : 0.00186 Lockup Definition : Version 2.0
Stress Model : von-Mises Stress (w/ bending) Weight Transfer : 1.0%
Helical Buckling Stress : On Force Differential : 1 lbf
Lockup in compression : Yes
Friction included in HBL : Yes
Include Disconnect : No

Coiled Tubing Input - ML5 Trial

Section Start Position End Position Top Wall Bottom Wall Yield Strength Youngs Modulus Density
(m) (m) (in) (in) (kpsi) (kpsi) (lb/in³)
1 0.0 4572.0 0.035 0.035 80.0 27000 0.281

CT Diameter : 0.500 in CT Length : 4572.0 m

CT Fluid Input
Section Depth (m) Fluid Name
1 4572.0 Fresh Water

Fluid Name Fluid Type Rheology Model Density Viscosity Plastic Visc Yield Point Flow-Behavior Consistency Index
(lb/gal) (cp) (cp) (lb/100 ft²) Index (lb-sec^n/100 ft²)
Fresh Water Liquid Newtonian 8.33 0.8799 - - - -

Well Description - TN-ML5

Section Depth (m) Hole Dia. (in)
1 2888.4 4.090
2 3365.0 3.068
3 3379.0 2.441
4 3603.0 6.456

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Well Description - TN-ML5
(cont.)
Section Depth (m) Hole Dia. (in)
5 3607.0 6.456

Well Fluid Input

Section Depth (m) Fluid Name
1 3607.0 Fresh Water

Fluid Name Fluid Type Rheology Model Density Viscosity Plastic Visc Yield Point Flow-Behavior Consistency Index
(lb/gal) (cp) (cp) (lb/100 ft²) Index (lb-sec^n/100 ft²)
Fresh Water Liquid Newtonian 8.33 0.8799 - - - -

Reservoir Depth : 3607.0 m

Friction Input
Section Depth (m) Friction in Friction out
1 3607.0 .3000 .2500

Temperature Profile
Depth (m) Temperature (°F)
Surface - 0.0 86
3.0 86
Total Depth - 3607.0 243

Temperature Gradient : 0.0437 °F/m

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Data

Survey Point Data - Input Parameters

Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
1 0.0 0.0 0.0 0.0 0.000
2 13.0 0.0 0.0 13.0 0.000
3 100.0 0.1 173.9 100.0 0.045
4 130.0 0.1 30.5 130.0 0.194
5 160.0 0.1 328.4 160.0 0.127
6 190.0 0.0 345.6 190.0 0.095
7 220.0 0.1 224.8 220.0 0.114
8 250.0 0.1 229.3 250.0 0.012
9 280.0 0.1 197.1 280.0 0.074
10 310.0 0.1 179.8 310.0 0.040
11 340.0 0.2 206.0 340.0 0.092
12 358.0 0.2 183.5 358.0 0.117
13 379.0 0.9 251.2 379.0 1.407
14 407.0 0.7 255.2 407.0 0.247
15 435.0 0.1 209.2 435.0 0.752
16 463.0 0.5 182.2 463.0 0.447
17 492.0 0.7 198.2 492.0 0.268
18 520.0 0.5 184.9 520.0 0.261
19 548.0 0.7 185.2 548.0 0.218
20 577.0 0.8 233.2 577.0 0.663
21 605.0 1.1 188.7 605.0 0.833
22 633.0 0.6 147.2 633.0 0.840
23 662.0 1.0 181.2 662.0 0.638
24 690.0 0.2 65.2 690.0 1.380
25 718.0 0.2 201.2 718.0 0.343
26 747.0 0.7 72.2 747.0 0.955
27 775.0 0.2 298.7 775.0 1.001
28 803.0 0.4 33.2 803.0 0.545
29 831.0 0.9 179.2 831.0 1.497
30 860.0 1.3 155.2 860.0 0.654
31 888.0 0.7 111.2 888.0 1.087
32 916.0 1.3 120.2 916.0 0.652
33 944.0 1.5 132.2 944.0 0.415
34 973.0 2.1 135.2 972.9 0.618
35 1001.0 0.5 94.2 1000.9 1.959
36 1030.0 1.1 111.2 1029.9 0.630
37 1057.0 1.0 105.2 1056.9 0.174
38 1086.0 1.1 108.7 1085.9 0.181
39 1114.0 1.0 172.2 1113.9 1.242

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Point Data - Input Parameters
(cont.)
Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
40 1142.0 1.6 168.7 1141.9 0.648
41 1171.0 1.5 160.2 1170.9 0.263
42 1199.0 1.3 177.2 1198.9 0.541
43 1227.0 0.5 159.2 1226.9 0.898
44 1255.0 0.5 127.2 1254.9 0.307
45 1284.0 1.1 152.2 1283.9 0.735
46 1312.0 0.8 167.2 1311.9 0.429
47 1340.0 0.5 169.7 1339.9 0.393
48 1368.0 0.6 115.2 1367.9 0.575
49 1397.0 0.7 116.4 1396.9 0.044
50 1425.0 0.8 133.2 1424.9 0.273
51 1453.0 1.1 167.2 1452.9 0.672
52 1481.0 1.5 198.2 1480.9 0.855
53 1491.0 1.5 192.2 1490.9 0.472
54 1502.0 1.1 192.2 1501.9 1.108
55 1523.0 0.7 216.8 1522.9 0.804
56 1551.0 0.6 208.2 1550.9 0.141
57 1580.0 0.7 216.2 1579.8 0.132
58 1608.0 1.2 201.2 1607.8 0.635
59 1636.0 1.5 214.2 1635.8 0.425
60 1664.0 1.7 221.2 1663.8 0.343
61 1692.0 1.4 220.7 1691.8 0.305
62 1721.0 2.3 241.7 1720.8 1.168
63 1749.0 2.1 242.7 1748.8 0.200
64 1777.0 1.8 237.2 1776.8 0.451
65 1805.0 1.6 230.2 1804.8 0.265
66 1833.0 2.0 233.3 1832.7 0.374
67 1862.0 1.7 236.2 1861.7 0.310
68 1890.0 1.7 237.7 1889.7 0.058
69 1918.0 2.3 247.7 1917.7 0.785
70 1947.0 2.1 244.7 1946.7 0.271
71 1975.0 2.1 249.7 1974.7 0.200
72 2004.0 1.8 246.7 2003.6 0.284
73 2032.0 3.2 253.2 2031.6 1.523
74 2061.0 3.3 249.2 2060.6 0.276
75 2089.0 3.1 247.7 2088.5 0.246
76 2118.0 3.0 244.7 2117.5 0.245
77 2147.0 3.6 245.2 2146.4 0.663
78 2175.0 4.0 242.2 2174.4 0.536
79 2204.0 3.1 242.7 2203.3 0.999
80 2232.0 3.0 245.2 2231.3 0.169
81 2260.0 2.3 238.2 2259.2 0.811
82 2289.0 1.9 238.7 2288.2 0.473
*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Point Data - Input Parameters
(cont.)
Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
83 2317.0 1.8 239.7 2316.2 0.146
84 2346.0 1.5 243.7 2345.2 0.289
85 2374.0 1.3 247.2 2373.2 0.287
86 2403.0 1.0 241.2 2402.2 0.338
87 2431.0 1.0 244.7 2430.2 0.063
88 2460.0 0.9 243.7 2459.2 0.086
89 2488.0 0.6 225.2 2487.2 0.377
90 2517.0 0.5 214.2 2516.2 0.169
91 2545.0 0.5 246.7 2544.2 0.295
92 2574.0 0.4 231.7 2573.2 0.123
93 2602.0 0.1 229.2 2601.2 0.370
94 2631.0 0.1 226.2 2630.2 0.042
95 2659.0 0.2 267.2 2658.2 0.169
96 2688.0 0.2 87.2 2687.2 0.463
97 2716.0 0.3 115.7 2715.2 0.130
98 2745.0 0.3 114.2 2744.2 0.007
99 2773.0 0.3 102.2 2772.2 0.083
100 2801.0 0.4 71.2 2800.2 0.216
101 2830.0 0.5 52.2 2829.2 0.198
102 2858.0 0.6 65.7 2857.2 0.202
103 2887.0 0.8 62.7 2886.2 0.132
104 2915.0 0.8 55.7 2914.2 0.100
105 2944.0 0.8 51.7 2943.2 0.064
106 2972.0 0.8 33.2 2971.2 0.270
107 3001.0 1.0 26.7 3000.2 0.233
108 3029.0 1.0 40.2 3028.2 0.243
109 3057.0 1.0 41.2 3056.1 0.028
110 3086.0 1.1 46.7 3085.1 0.155
111 3114.0 1.3 51.2 3113.1 0.210
112 3143.0 1.6 50.2 3142.1 0.316
113 3171.0 1.2 62.7 3170.1 0.501
114 3200.0 1.1 73.2 3199.1 0.253
115 3228.0 0.8 68.2 3227.1 0.287
116 3257.0 1.0 47.2 3256.1 0.393
117 3285.0 1.0 45.2 3284.1 0.038
118 3313.0 1.0 48.2 3312.1 0.057
119 3342.0 0.8 40.2 3341.1 0.292
120 3370.0 0.6 51.7 3369.1 0.235
121 3399.0 0.6 45.7 3398.1 0.078
122 3405.0 0.6 50.2 3404.1 0.255
123 3420.0 0.7 24.1 3419.1 0.589
124 3436.0 0.5 71.7 3435.1 0.927
125 3464.0 0.4 59.7 3463.1 0.117
*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Point Data - Input Parameters
(cont.)
Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
126 3492.0 0.4 60.2 3491.1 0.033
127 3521.0 0.3 64.2 3520.1 0.129
128 3550.0 0.4 68.7 3549.1 0.109
129 3578.0 0.4 71.2 3577.1 0.048
130 3587.0 0.7 30.2 3586.1 1.692
131 3598.0 0.5 25.8 3597.1 0.623
132 3607.0 0.5 25.8 3606.1 0.000

*These results are intended for the use of the authorized Cerberus Project : TN-ML5 Capillary String
Well Intervention Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared by : Risal Rahman on 3/17/2011
Cerberus v 9.5.209
the Cerberus License Agreement. For : TOTAL E&P INDONESIE
*No warranty is expressed or implied by CTES
as to data results calculated by this software.